Scribd
Upload
13 views2 pages

Guru Kashi University, Talwandi Sabo

The MMM Lab Inspection Report from Guru Kashi University in Talwandi Sabo details 10 experiments, the required maintenance for each experiment setup, and any remarks. Several experiment setups required maintenance like the specimen table movement and oil sealing leakage. The technician was noted as required for the specimen table.

Uploaded by

yad1020
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
13 views2 pages

Guru Kashi University, Talwandi Sabo

The MMM Lab Inspection Report from Guru Kashi University in Talwandi Sabo details 10 experiments, the required maintenance for each experiment setup, and any remarks. Several experiment setups required maintenance like the specimen table movement and oil sealing leakage. The technician was noted as required for the specimen table.

Uploaded by

yad1020
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

GURU KASHI UNIVERSITY, TALWANDI SABO

MMM Lab Inspection Report Exp. No. 1. 2. 3. 4. 5. Name of Experiment


Measurement with the help of vernier caliper and micrometer Measurement of an angle with the help of sine bar Measurement of surface roughness Measurement of gear elements using profile projector Three wire method to determine effective diameter of external threads

Date: Required Maintenance Remark

Working Condition OK OK Setup not Available. Maintenance Required. Setup not Available. OK Maintenance Required. Setup not Available. Setup not Available. OK NIL NIL NIL NIL

Specimen Table movement is not proper.

(Technician Required)

6. 7. 8.

Measurement of thread element by Tool makers microscope Calibration of a pressure guage with the help of a dead weight guage tester Use of stroboscope for measurement of speed of shaft

Oil sealing Leakage. Oil required.

9. 10.

Use of pitot tube to plot velocity profile of a fluid through a circular duct Preparation of a thermocouple, its calibration and application for temperature measurement

You might also like