Installation

Hardware Installation
A. Using an USB 2.0 cable only. NOTES Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic. Make sure you have a personal computer with an open USB port before connecting the drive to your computer. Power for all other devices should be turn off before attaching the cables.
USB 2.0 cable

Connecting to computer
Connect the drive to the computer as shown in figure. A. Using an USB 2.0 cable only. 1. Connect the USB 2.0 cable to the External Super Multi DVD Rewriter. 2. Connect the other end of the USB 2.0 cable to your computer. B. Using USB 2.0 Cable and USB Power cable. (DC-jack type) 1. Connect the USB 2.0 cable to the External Super Multi DVD Rewriter. 2. Connect the other end of the USB 2.0 cable to your computer. 3. Connect the USB power cable (DC-jack type) to the External Super Multi DVD Rewriter. 4. Connect the other end of the USB power cable to your computer. NOTES NOTES The Rewriter may get its power from the USB power. All systems may not meet USB power requirements and full performance may not be achieved. In this case, connect to the included USB power cable (DC-jack type.). Please do connect the USB cables by any means other than specified above. Using the wrong type of cable with this drive can cause it to malfunction.
The machine does not have an ON/OFF switch. As soon as it is connected to the AC power, the power up sequence begins. The power supply cord is intended to serve as the main disconnect device. The power outlet shall be near the equipment and shall be easily accessible. The appliance is not intended for use by young children or infirm persons without supervision. Young Children should be supervised to ensure that they do not play with appliance. If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.
USB 2.0 cable

B. Using USB 2.0 Cable and USB Power cable. (DC-jack type)

USB Power cable (DC-jack type)

When the computer is ready, confirm that the drive is detected. And then, insert the supplied software CD into the External Super Multi DVD Rewriter and install the software.

Location and function of controls

This following is the general figure of the design of the drive. The drives appearance and specifications may change without prior notice.

Front 1. Disc Tray 2. Drive activity indicators The LED used to indicate the operation of External Super Multi DVD Rewriter. 3. Eject Button 4. Emergency Eject Hole

1
Rear 1. Power Connector This connector is used to connect to the USB power cable. (DC-jack type) Or, this connector is used to connect to the AC Power adapter cord (5V, 2A, outside diameter: 4mm, inside diameter: 1.75mm) (Not supplied). 2. USB Connector This connector is used to connect to the USB 2.0 cable.

2 3 4

Removing the USB converter cable (For Windows)

The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by performing the following operation. 1. Stop the application software being currently used. 2. Click the icon of the taskbar located on your screens bottom right side.

3. Click Safely Remove USB Mass Storage Device-Drive[x:]. 4. Click Ok and then remove the USB converter cable.

NOTE Dont remove the USB 2.0 cable when the busy indicator on the drive blinks, or during computer startup. The removing procedure varies depending on your OS.

Quick Set-up Guide

Features
* Universal Serial Bus (USB) 2.0 interface for high-speed data transfer. Buffer Under Run error protection technology Emergency eject support Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL, DVD-R DL and DVD-RAM drive functions into one drive. Supports region playback control Phase II. Supports SecurDiscTM Technology. Supports LightScribe Direct Label Printing Technology - *Optional. You can use a variety of Drive
GP08LU10 Light Scribe I/F USB 2.0 only GP08NU10 X USB 2.0 only

External

Super Multi DVD Rewriter

GP08

To install of your product, please read this guide manual carefully and completely. For the detailed owners manual of the drive, please refer to the CD manual.

System Environment
Computer
This unit can be operated in the system environment explained here.
System requirements CPU Pentium III 1.0GHz or Higher(with USB 2.0) for basic performance (Recommended for optmal performance: Pentium IV 2.4GHz or Higher). 256MB or larger (Recommended: 512MB). 20GB or more free space. (The free space needed for writing depends on the quantity of data.) 64MB (Recommended: 128MB). USB 2.0 port For Software installation Windows Vista/Windows XP Home Edition/Professional Direct X 9.0 or Higher Mac OS X: Ver 10.4.10 or Higher CD-R : LG, Mitsubishi Kagaku Media, Verbatim, Thats, TDK, Ritek or HP discs are recommended. CD-RW : LG, Mitsubishi Kagaku Media, Verbatim are recommended. DVD-R : Mitsubishi Kagaku Media, Maxell, Thats are recommended. DVD-RW : Victor. JVC, Mitsubishi Kagaku Media, TDK are recommended. DVD+R : Mitsubishi Kagaku Media, Thats, Maxell are recommended. DVD+RW : TDK, Mitsubishi Kagaku Media, Ricoh are recommended. DVD-RAM : Maxell, Mitsubishi Kagaku Media are recommended. DVDR DL : Mitsubishi Kagaku Media, Verbatim are recommended.

Memory Hard disk Video Memory Interface CD-ROM drive Software Required OS

Package Items
Item - External Super Multi DVD Rewriter - USB 2.0 cable - USB Power cable (DC-jack type) - Software CD - Quick Guide for Drive Cautions System meeting the following requirements is needed in order to use USB 2.0 operation with this drive. Computer that is equipped with a USB 2.0 compliant USB connector or PCI
adapter card, and on which the USB 2.0 EHCI (Enhanced Host Controller Interface) driver software 1) has been installed. 1) The USB 2.0 EHCI driver software is supplied with currently available PCI adapter cards that conform to USB 2.0. Further, Microsoft has released the USB 2.0 EHCI driver software for Windows XP, therefore it is also possible to use this driver software with Windows XP. If you want to know in detail, please contact your USB 2.0 adapter dealer or consult your PC manufacturer, or consult the Microsoft Corporation Web site.

Quantity 1 1 1 1 1

CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVDR DL discs

* For Windows Vista, 512MB of RAM or large is recommended. * Compatibility problem in write/read function may occur with some media depending on the media manufacturing quality. * To achieve maximum Record & Write speed your system may require data to be copied first to the computers hard drive rather than directly from another source disc or drive.

Specifications
Supported Discs DVD-ROM(Single/Dual), DVD-RW, DVD-R, DVD+RW, DVD+R, DVD+R Double layer, DVD-R Dual layer, DVD- RAM, CD-Digital Audio & CD-Extra, CD-Plus, CD-ROM, CD-ROM XA-Ready, CD-I FMV, CD-TEXT, CD-Bridge, CD-R, CD-RW, Photo-CD (Single & Multi-Session), Video CD, DVD-VIDEO Dimensions (WxHxD) 156 x 21 x 165mm Weight About 380g Interface USB 2.0 Read/Write Speed Write : (DVD-R): 2x CLV, 4x ZCLV, 8x CAV (DVD-R DL): 2x CLV, 4x ZCLV, 6x ZCLV (DVD-RW): 2x CLV, 4x, 6x ZCLV (DVD-RAM): 2x, 3x ZCLV, 5x PCAV (Ver. 2.0 & higher) (DVD+R): 2.4x CLV, 4x ZCLV, 8x CAV (DVD+R DL): 2.4x CLV, 4x ZCLV, 6x ZCLV (DVD+RW): 2.4x, 3.3x CLV, 4x ZCLV, 8x ZCLV (CD-R): 10x CLV, 16x, 24x ZCLV (CD-RW): 4x, 10x CLV, 16x ZCLV, 24x ZCLV (High Speed: 10x CLV, Ultra Speed > 16x ZCLV Ultra Speed plus > 16x ZCLV) Read : (DVD-R/RW/ROM): 8x/8x/8x max. (DVD-R DL): 8x max. (DVD-RAM) (Ver.2.0 & Higher): 5x max. (DVD-Video) (CSS Compliant Disc): 4x max. (DVD+R/+RW): 8x/8x max. (DVD+R DL): 8x max. (CD-R/RW/ROM): 24x/24x/24x max. (CD-DA (DAE)): 24x max. The drives appearance and specifications may change without prior notice. - The maximum data transfer rate varies according to the performance capabilities of the PC. - For the sake of periodic improvements, specifications and appearance are subject to change without notice. - We have taken all possible measures to assure the quality of our products, but we cannot be responsible for the consequences if defect occurs. P/NO. 3828HN1012X
Ver. B

Data transfer rate Sustained

CD-ROM : 3,600 Kbytes/s (24X max) DVD-ROM : 11.08 Mbytes/s (8X max) Average Access CD-ROM : 140msec (Typical) Time (1/3 Stroke) DVD-ROM : 160msec (Typical) DVD-RAM : 360msec (Typical) Buffer capacity 2 Mbytes MTBF 60,000 Power On Hours (Duty Cycle 10%) Supported CD-R, CD-RW, DVD+R, DVD+RW, DVD-R, SecureDiscs DVD-RW, DVD+R DL, DVD-R DL, DVD-RAM Power Requirement 5V DC Operating Environment Temperature 5 to 40 C Humidity 15 to 80 % Storage Environment Temperature -30 to 60 C Humidity 10% to 90% RH

Software
Install the appropriate CD Recording Authoring Software before using this unit. * Please uninstall any previous CD burning software you may have loaded on your PC in order to prevent possible compatibility issues. Once you have installed the application software, you may (if you wish) begin to reinstall previous software, taking note for errors. We recommend using the drive with the latest software as some problems encountered when using the drive can be solved by updating the software.
* For more SecurDisc information, visit http://www.securdisc.net

Please visit www.lgservice.com and install the program, LG ODD Online F/W update. By using the program, you can automatically check the latest information about FirmWares and update the FirmWare. Worldwide support ; http://www.LGservice.com Worldwide corporate site : http://www.LGE.com

Safety Instructions
CAUTION: The laser used in the External Super Multi DVD Rewriter can damage your eyes. Do not attempt to open the cover. To reduce the risk of electric shock, do not remove the cover (or back). There are no user-serviceable parts inside. Refer servicing to qualified service personnel. Use of controls or performance of procedures other than those specified herein may result in hazardous radiation exposure. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.a PERICOLO : Il dispositivo di lettura e scrittura utilizzato in questo masterizzatore utilizza un raggio laser che, se osservato da vicino, pu danneggiare la vista. Evitare di smontare il coperchio dellapparecchio. Al fine di prevenire eventuali folgorazioni, evitare di smontare lapparecchio. Allinterno dellapparecchio non sono presenti parti che richiedono manutenzione da parte dellutente. In caso di difetti o guasti, rivolgersi ad un Centro di Assistenza Tecnica. Lesecuzione di procedure diverse da quella espressamente indicate in questo manuale pu provocare pericolose esposizioni alle radiazioni laser. ATTENZIONE: Al fine di evitare cortocircuiti o principi di incendio, evitare di esporre questo apparecchio alla pioggia o ad una eccessiva umidit ambientale. PRECAUCION: El lser utilizado en la unidad External Super Multi DVD puede daar sus ojos. No intente abrir la tapa. Para reducir el riesgo de descarga elctrica, no quite la tapa (ni la parte posterior). No hay piezas internas que deba mantener el usuario. El servicio de mantenimiento debe efectuarlo personal tcnico cualificado. El uso de controles o la ejecucin de procedimientos distintos de los especificados en este manual pueden ser causa de exposicin a radiacin peligrosa. ADVERTENCIA: Para reducir el riesgo de fuego o descarga elctrica, no exponga este aparato a la lluvia ni a la humedad. CUIDADO: O laser utilizado na unidade Super Multi DVD pode causar leses oculares. No tente abrir a tampa. Para reduzir o risco de choques elctricos, no retire a tampa (quer frontal quer superior ). A unidade no contm peas que possam ser reparadas pelo utilizador. Deixe a manuteno para um tcnico da assistncia qualificado. A utilizao de controlos ou a execuo de procedimentos que no sejam os especificados neste manual podem causar a exposio a radiaes perigosas. AVISO: Para reduzir o risco de incndio ou choque eltrico no exponha este aparelho chuva ou humidade.

VORSICHT : Der in diesem External Super Multi DVD -Laufwerk benutzte Laser kann Ihre Augen schdigen. Versuchen Sie keinesfalls, die Abdeckung zu ffnen. Um die Gefahr eines elektrischen Schocks zu reduzieren, sollten Sie die Abdeckung (oder Rckseite) keinesfalls entfernen. Im Inneren des Gerts befinden sich keine Teile, die vom Benutzer selbst gewartet werden knnen. berlassen Sie die Wartung qualifizierten Kundendiensttechnikern. Beachten Sie bei der Benutzung von Bedienelementen und der Durchfhrung von Prozeduren unbedingt die Anweisungen dieses Handbuchs, da andernfalls gefhrliche Strahlung freigesetzt werden kann. WARNUNG : Setzen Sie das Laufwerk keinesfalls Regen oder Feuchtigkeit aus, um die Gefahr eines Brandes oder elektrischen Schocks zu reduzieren.

ATTENTION: l'exposition au laser utilis dans le super graveur multi-DVD prsente un danger pour les yeux. N'essayez pas d'ouvrir le capot. Afin de rduire les risques de chocs lectriques, ne retirez pas le capot (ni l'arrire du dispositif). Aucune pice interne ne peut tre remplace par l'utilisateur. Pour la maintenance de l'appareil, adressez-vous au personnel qualifi du service de maintenance. L'utilisation de commandes ou de procdures diffrentes de celles spcifies ci-aprs peut entraner une exposition des rayons dangereux. AVERTISSEMENT :Ne pas exposer ce matriel la pluie ou lhumidit (risques dincendie et dlectrocution).

This product is manufactured to comply with the radio interference requirements of EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. Dieses Produkt erfllt die Funkstrungsanforderungen folgender Normen: 2004/108/EC und 2006/95/EC. Ce produit a t fabriqu conformment aux prescriptions EMC DIRECTIVE 2004/108/EC et 2006/95/EC. Questo prodotto risponde alle direttive EMC 2004/108/EC e 2006/95/EC, relative alla compatibilit elettromagnetica. Este producto ha sido fabricado cumpliendo los requisitos sobre interferencias de radio de la DIRECTIVAS EMC 2004/108/EC y 2006/95/EC.
CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 CLASE 1 CLASSE 1 LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT PRODUCTO LSER PRODOTTO LASER

Industry Canada requirement This class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. FCC COMPLIANCE STATEMENT Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an Authorized Service Center for help. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This External Super Multi DVD Rewriter is for use only with UL listed personal computers that have installation instructions detailing user-installation of card cage accessory.

CAUTION : CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED.AVOID EXPOSURE TO THE BEAM. ADVARSEL : KLASSE 3B SYNLIG OG USYNLIG LASERSTRLING I BEN TILSTAND OG VED AFBRUDT LSEFUNKTION. UNDG AT BLIVE RAMT AF LASERSTRLEN. VARO! : LUOKKA 3B AVATTAESSA JA KUMOTTAESSA LUKITUS NKYV JA NKYMTNT LASERSTEILY. VLT LASERSTEILLE ALTISTUMISTA. ATTENTION : CLASSE 3B RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS DOUVERTURE ET ENCLENCHEMENTS DEFECTUEUX, EVITER L'EXPOSITION AU FAISCEAU. VORSICHT : SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG DER KLASSE 3B WENN ABDECKUNG GEFFNET UND SICHERHEITSVERRIEGELUNG BERBRCKT VERMEIDEN SIE ES, SICH DEM STRAHL AUSZUSETZEN. ADVARSEL : KLASSE 3B SYNLIG OG USYNLIG LASERSTRLING NR PNES OG LS BRYTES. UNNG EKSPONERING FOR STRLEN. VARNING : KLASS 3B SYNLIG OCH OSYNLIG LASERSTRLNING FREKOMMER NR OCH MELLANLSET FRSTRS. UNDVIK EXPONERING UNDER STRLEN.

Microsoft and Windows are trademarks registered in the United States and other countries by the Microsoft Corporation. The company names and product names written in this manual are trademarks or registered trademarks of the respective companies.