ATS021, ATS022: Automatic Transfer Switches

ATS021, ATS022 Automatic Transfer Switches
ATS021, ATS022
Automatic Transfer Switches

ABB presents the new generation of Automatic Transfer Switch, the result of a worldwide experience on low voltage applications. The new generation of ATS family ATS021 and ATS022 offers the most advanced and comprehensive solution in power continuity. Reliability, safety and intelligence are the top features of the brand new range of ATS family which is in compliance with world standards, simple to configure and fitting all application scenarios. Moreover, the perfect integration with all ABB circuit-breakers and switchdisconnectors ensures a complete coordinated system.
Multi-function logic to meet all requirements ATS family provides the standard logic to monitor the normal and emergency line, sends the commands to the generator and controls the circuit-breakers which have to be switched; Possibility to control a third circuit-breaker on bus-tie with the ATS022; No line priority: in this background, none of the two lines is of outmost importance. No auxiliary power supply required The new ATS family is designed to work without auxiliary power supply. Auxiliary power supply is only required when Dialogue Modbus RS485 is used or in networks with rated frequency of 16 2/3 Hz. Compliance with IEC and EN 60947 The compliance with the Standard guarantees the new ATS family to provide the quality and safety that meet all the requirements of automatic transfer. Compatibility with ABB circuit-breakers and switchdisconnectors The ATS family can be fit in perfectly with ABB circuit-breakers and switch-disconnectors, thereby ensuring availability of a complete and coordinated system. Advanced Operator interface and Communication ATS022 is equipped with a communication unit which allows the integration with supervision systems via Modbus RS485. Graphic display is also provided for ATS022. Applications ATS family is highly suited to use in all emergency power supply systems where a ready-to-install, easy to use and reliable solution is required. Some of its main applications are listed therefore: Power supply of UPS groups in general; Operating theatres and primary hospital services; Emergency power supplies for civil building, hotels and airports; Data banks and telecommunication systems; Power supply of industrial line for continuous processes.
2
Accessories To connect Tmax and Emax circuit-breakers to the ATS, the following accessories are required*.
Shunt Opening Release Shunt Closing Release Emax X1 Tmax T7 Springs Charging Motor Auxiliary Contact for signalling of circuit-breaker Open/Closed Auxiliary Contact for signalling of overcurrent release tripped Auxiliary Contact for signalling of circuit-breaker Racked-in (only if withdrawable circuit breaker) Motor Operator Tmax T3 Auxiliary Contact for signalling of circuit-breakers Open/Closed Tmax T4 Auxiliary Position Contact for signalling of circuit-breaker Tmax T5 Racked-in (only if withdrawable circuit-breaker) Tmax T6 Key Lock only against Manual Operation for Motor Operator Mechanical Interlock
* For more details please consult Emax and Tmax catalogues
Dimensions
9,5 5 160
139 114 174 91
19,5 115
Ordering Codes
Order Code 1SDA065523R1 1SDA065524R1 Description ATS021 Automatic transfer switch control unit ATS022 Automatic transfer switch control unit
Technical Characteristics
ATS021 Auxiliary Power Supply Rated Voltage, Un General Frequency, fn H mm Dimensions Type of installation Operating Mode Monitoring of the Normal and Emergency lines Controlling CBs of the Normal and Emergency lines Generator set startup Features Generator set shutdown with adjustable delay Bustie No-priority Line Modbus RS485 Dialogue Display Environmental conditions Operating thresholds Test Degree of protection Operating temperature Maximum humidity Minimum voltage Maximum voltage Fixed frequency thresholds Test Mode Electronic equipment for use in power installations Compliance with standards Environmental conditions Electromagnetic compatibility
H L D
ATS022 Not Required (24-110 VDC is required only for Modbus dialogue and 16 2/3 Hz system) Max 480 VAC 16 2/3, 50, 60, 400 Hz 96 144 170 Door mounting - DIN-rail mounting Auto/Manual IP20 -20 +60 oC 5% - 90% without condensation -30% -5% Un +5% +30% Un -10% +10% fn EN-IEC 50178 EN 50081-2 EN 50082-2 IEC 68-2-1 IEC 68-2-2 IEC 68-2-3
Not Required
Max 480 VAC 50, 60 Hz 96 144 170 DIN-rail mounting - Door mounting Auto/Manual IP20 -20 +60 oC 5% - 90% without condensation -30% -5% Un +5% +30% Un -10% +10% fn EN-IEC 50178 EN 50081-2 EN 50082-2 IEC 68-2-1 IEC 68-2-2 IEC 68-2-3 L mm D mm
Contact us
Copyright 2009 ABB. All rights reserved.
www.abb.com
1SDC001007B0201 - 2009.04 - 6.000
ABB SACE A division of ABB S.p.A. L.V. Breakers Via Baioni, 35 24123 Bergamo Tel: +39 035 395111 Fax: +39 395.306-433
The data and illustrations are not binding. We reserve the right to modify the contents of this document on the basis of technical development of the products, without prior notice.

ATS021, ATS022: Automatic Transfer Switches

Uploaded by

Copyright:

Available Formats

ATS021, ATS022: Automatic Transfer Switches

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ATS021, ATS022: Automatic Transfer Switches

Uploaded by

Copyright:

Available Formats

ATS021, ATS022 Automatic Transfer Switches

Automatic Transfer Switches

139 114 174 91

Copyright 2009 ABB. All rights reserved.

1SDC001007B0201 - 2009.04 - 6.000

You might also like