Scribd
Upload
154 views3 pages

Configuracion Switch y Router Cisco

The document describes the basic configuration of a router and switch including: - Configuring the hostname, enable passwords, console and vty lines - Configuring IP addresses on interfaces and enabling them - Configuring a default gateway on the switch - Saving the running configuration to startup to make the configuration permanent

Uploaded by

Renzo Mejia Veli
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
154 views3 pages

Configuracion Switch y Router Cisco

The document describes the basic configuration of a router and switch including: - Configuring the hostname, enable passwords, console and vty lines - Configuring IP addresses on interfaces and enabling them - Configuring a default gateway on the switch - Saving the running configuration to startup to make the configuration permanent

Uploaded by

Renzo Mejia Veli
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

CONFIGURACION BASICA DE ROUTER Router>enable Router#configure Terminal Configuracin nombre del Router Router(config)#hostname GAD Configuracin Clave enable

GAD(config)#enable password cisco Configuracin Line Consola GAD(config)#line console 0 GAD(config-line)#password cisco GAD(config-line)#login GAD(config-line)#exit GAD(config)# Configuracin Line vty (telnet) GAD(config)#line vty 0 4 GAD(config-line)#password cisco GAD(config-line)#login GAD(config-line)#exit GAD(config)# Configuracin serial interface Serial 0 GAD(config)#interface serial 0 GAD(config-if)#ip address 192.168.15.1 255.255.255.0 GAD(config-if)#clock rate 56000 (Solo para Router DCE) GAD(config-if)#no shutdown GAD(config-if)#exit GAD(config)#exit Configuracin interface FastEthernet 0 GAD(config)#interface fastEthernet 0 GAD(config-if)#ip address 192.168.14.1 255.255.255.0 GAD(config-if)#no shutdown GAD(config-if)#exit GAD (config)#exit Guardar Configuracin GAD#copy running-config startup-config

CONFIGURACION BASICA DE UN SWITCH Switch>enable Switch# Switch#configure terminal Switch(config)#hostname ALSwitch (NOMBRE DEL SWITCH) ALSwitch(config)#line con 0 ALSwitch(config-line)#password cisco (CLAVE DE CONSOLA) ALSwitch(config-line)#login ALSwitch(config-line)#line vty 0 15 ALSwitch(config-line)#password cisco (CLAVE DE TELNET) ALSwitch(config-line)#login ALSwitch(config-line)#exit ALSwitch(config)#enable password cisco (CLAVE DE ENABLE) ALSwitch(config)#enable secret class (CLAVE DE ENABLE) ALSwitch(config)#interface VLAN 1 ALSwitch(config-if)#ip address 192.168.1.2 255.255.255.0 (IP DEL SWITCH) ALSwitch(config-if)#no shutdown ALSwitch(config-if)#exit ALSwitch(config)#ip default-gateway 192.168.1.1 (IP DEL ROUTER) ALSwitch(config)#exit ALSwitch#copy running-config startup-config Destination filename [startup-config]?[Intro] Building configuration... [OK] ALSwitch#

CONFIGURACION AVANZADA DE UN SWITCH


Switch>enable Switch# Switch#configure terminal Switch(config)# interface range fastEthernet 0/1 - 48 Switch(config-if-range)# switchport Switch(config-if-range)# switchport mode access Switch(config-if-range)# switchport port-security mac-address sticky Switch(config-if-range)# spanning-tree bpduguard enable Switch(config-if-range)# spanning-tree portfast Switch(config-if-range)# switchport port-security Switch(config-if-range)# switchport port-security maximum 1 Switch(config)#hostname ALSwitch (NOMBRE DEL SWITCH) ALSwitch(config)#line con 0 ALSwitch(config-line)#password cisco (CLAVE DE CONSOLA) ALSwitch(config-line)#login ALSwitch(config-line)#line vty 0 15 ALSwitch(config-line)#password cisco (CLAVE DE TELNET) ALSwitch(config-line)#login ALSwitch(config-line)#exit ALSwitch(config)#enable password cisco (CLAVE DE ENABLE) ALSwitch(config)#enable secret class (CLAVE DE ENABLE) ALSwitch(config)#interface VLAN 1 ALSwitch(config-if)#ip address 192.168.1.2 255.255.255.0 (IP DEL SWITCH) ALSwitch(config-if)#no shutdown ALSwitch(config-if)#exit ALSwitch(config)#ip default-gateway 192.168.1.1 (IP DEL ROUTER) ALSwitch(config)#exit ALSwitch#copy running-config startup-config Destination filename [startup-config]?[Intro] Building configuration... [OK]

You might also like