Scribd
Upload
66 views2 pages

Course 33

This document provides a detailed syllabus for the course "Digital Systems Design (Video Course)" taught by Prof. D. RoyChowdhury at Indian Institute of Technology, Kharagpur. The syllabus covers topics like digital logic, Boolean algebra, combinational circuit design, synchronous sequential circuit design, programmable logic, and digital computing over 14 lectures totaling 50 hours. Key topics include binary number systems, logic gates, Karnaugh maps, designing multiplexers, decoders, flip-flops, counters, state machines, and arithmetic/memory circuits for CPUs.

Uploaded by

khanashrafkhan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views2 pages

Course 33

This document provides a detailed syllabus for the course "Digital Systems Design (Video Course)" taught by Prof. D. RoyChowdhury at Indian Institute of Technology, Kharagpur. The syllabus covers topics like digital logic, Boolean algebra, combinational circuit design, synchronous sequential circuit design, programmable logic, and digital computing over 14 lectures totaling 50 hours. Key topics include binary number systems, logic gates, Karnaugh maps, designing multiplexers, decoders, flip-flops, counters, state machines, and arithmetic/memory circuits for CPUs.

Uploaded by

khanashrafkhan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Course 33. Digital Systems Design (Video Course) Faculty Coordinator(s) : 1. Prof. D.

RoyChowdhury Department of Electronics and Communication Engineering Indian Institute of Technology, Kharagpur Kharagpur - 721302 Email : [email protected] Telephone : (91-3222) Off : 283490 283497 277597 Detailed Syllabus : 1. Introduction to Digital Design (4hr.) - What is Digital ? Specification and Implementation of digital design Structured and Trial-Error methods in design Digital Computer Aided Design (CAD) tools Digital Logic (8hr.) Binary Number System Octal, Hexa-decimal and BCD Codes Number System Conversion Use of different number systems in digital design Logic gates AND, OR, NOT, NAND, NOR etc. NAND and NOR implementation of real life digital circuits Digital Circuit Characterization Fan-in/Fan-out, Switching Switching times, Noise margin etc.

Res :

2.

functions,

3.

Boolean Algebra (8hr.) AND, OR and other relations DeMorgans law Karnaugh Maps Minimization of Sum of Products and Product of Sums Design of minimal two-level gate networks Design of multiple output two level gate networks Combinational Circuit Design (5hr.) Design Procedure Design of Multiplexer, Decoder, Encoder, Comparator Design of Seven-segment display, Parity generator Design of large circuits using the above modules Synchronous Sequential Circuit Design ( 5hr.) Design of sequential modules SR, D, T and J-K Flip-flops Flip-flop applications Clock generation, Counters, Registers Basic State machine concepts Design of Programmable Logic (4hr.) Introduction to Programmable circuits

4.

5.

6.

7. Digital -

Design of Read-Only Memory (ROM), Programmable Logic Arrays (PLA), Programmable Array Logic (PAL) Computing (6hr.) Introduction to digital computer Design of Arithmetic circuits Adders, Multipliers Design of Memory ROM/RAM Design of a simple CPU

You might also like