Sony BDP-S560 ET

BDP-S560
SERVICE MANUAL
Ver. 1.0 2009.06
RMT-B104A
US Model Canadian Model
SPECIFICATIONS
System
Laser: Semiconductor laser EXT: External memory slot (For connecting the external memory) DC output: 5 V 500 mA Max USB: USB jack Type A (For connecting digital still camera and USB memory)
General
Power requirements: 120 V AC, 60 Hz Power consumption: 28 W Dimensions (approx.): 430 mm 216 mm 70 mm (17 in. 8 5/8 in. 2 13/16 in.) (width/depth/height) incl. projecting parts Mass (approx.): 2.4 kg (5 lb 4 5/8 oz) Operating temperature: 5 C to 35 C (41 F to 95 F) Operating humidity: 25 % to 80 %
Inputs and outputs

(Jack name: Jack type/Output level/Load impedance) LINE OUT R-AUDIO-L: Phono jack/2 Vrms/10 kilohms DIGITAL OUT (OPTICAL): Optical output jack/18 dBm (wave length 660 nm) DIGITAL OUT (COAXIAL): Phono jack/0.5 Vp-p/75 ohms HDMI OUT: HDMI 19-pin standard connector COMPONENT VIDEO OUT (Y, PB, PR): Phono jack/Y: 1.0 Vp-p/ PB, PR: 0.7 Vp-p/75 ohms LINE OUT VIDEO: Phono jack/1.0 Vp-p/75 ohms LINE OUT S VIDEO: 4-pin mini DIN/ Y: 1.0 Vp-p, C: 0.286 Vp-p/75 ohms LAN (100): 100BASE-TX Terminal
Wireless
Wireless LAN standard: IEEE802.11a/b/g IEEE802.11n draft 2.0 Frequency range: U.S. models: 2.4 GHz band: Channels 1-11 5 GHz band: Channels 36-64, 100-140, 149-165 Canada models: 2.4 GHz band: Channels 1-11 5 GHz band: Channels 36-64, 100-116, 132-140, 149-165 Modulation: DS-SS Modem and OFDM Modem
Supplied accessories
Audio/video cable (phono plug 3) (1) AC power cord (1) Remote commander (remote) (1) Size AA (R6) batteries (2) Specifications and design are subject to change without notice.
BLU-RAY DISC/DVD PLAYER
Sony Corporation
9-890-712-11
Video Business Group
2009F0500-1 2009.6 Published by Quality Assurance Dept.
BDP-S560 SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges. 2. Check the interboard wiring to ensure that no wires are pinched or contact high-wattage resistors. 3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. 4. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. 5. Check the line cord for cracks and abrasion. Recommend the replacement of any such line cord to the customer. 6. Check the B+ voltage to see it is at the values specified. 7. Check the antenna terminals, metal trim, metallized knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below. LEAKAGE TEST The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods. 1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers' instructions to use these instruments. 2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job. 3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The limit indication is 0.75V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2V AC range are suitable. (See Fig. A)
To Exposed Metal Parts on Set
CAUTION: The use of optical instrument with this product will increase eye hazard. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
0.15 F
1.5 k
AC voltmeter (0.75 V)
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
This label is located on the laser protective housing inside the enclosure.
WARNING!! WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 25 cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK OR DOTTED LINE WITH MARK ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT! LES COMPOSANTS IDENTIFIS PAR UNE MARQUE SUR LES DIAGRAMMES SCHMATIQUES ET LA LISTE DES PICES SONT CRITIQUES POUR LA SCURIT DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PICES SONY DONT LES NUMROS SONT DONNS DANS CE MANUEL OU DANS LES SUPPLMENTS PUBLIS PAR SONY.
Unleaded solder Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.) : LEAD FREE MARK Unleaded solder has the following characteristics. Unleaded solder melts at a temperature about 40C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder.
BDP-S560
TABLE OF CONTENTS
Section 1.
1-1.
Title
Page
Section 5.
Title
Page
SERVICE NOTE
1-1 1-1 1-2 1-2
PRINTED WIRING BOARDS

5-1 5-2 5-3 5-4 5-5 5-6 5-7 5-8 5-9 5-10
Disc Removal Procedure If The Tray Cannot Be Ejected (Forced Ejection) ............................................. 1-2. Work when optical device are replaced........................ 1-3. Test Disc ....................................................................... 1-3-1. Operation and Display.............................................
2.
2-1. 2-2. 2-3. 2-4. 2-5. 2-6. 2-7. 2-8. 2-9.
DISASSEMBLY
Disassembly Flow ........................................................ Upper Case .................................................................. Front Panel Block ......................................................... BD Drive ....................................................................... Wireless Lan Card Block .............................................. Rear Panel Block.......................................................... MB-127 Board .............................................................. Switching Regulator ..................................................... Circuit Boards Location ................................................ 2-1 2-1 2-2 2-3 2-3 2-4 2-4 2-5 2-5
5-1. 5-2. 5-3. 5-4. 5-5. 5-6. 5-7.
This Note Is Common For Printed Wiring Boards ........ ANT-001 Board (ANTENNA) Printed Wiring Board ...... ANT-002 Board (ANTENNA) Printed Wiring Board ...... FL-194 Board (SWITCH) Printed Wiring Board............ FR-302 Board (FL DRIVER) Printed Wiring Board ...... HU-012 Board (USB HUB) Printed Wiring Board ......... MB-127 Board (MAIN) Printed Wiring Board (Side A) ...................................... 5-8. MB-127 Board (MAIN) Printed Wiring Board (Side B) ...................................... 5-9. USB-016 Board (USB REAR CONNECTOR) Printed Wiring Board .................................................... 5-10. USB-017 Board (USB FRONT CONNECTOR) Printed Wiring Board ....................................................
6. 7. 8.
IC PIN FUNCTION DESCRIPTION ................... 6-1 SERVICE MODE ..................................................... 7-1 ERROR LOG LIST ................................................. 8-1 TROUBLESHOOTING............................................. 9-1 REPAIR PARTS LIST
10-1 10-1 10-2 10-3 10-4 10-5 10-6
3.
3-1. 3-2. 3-3. 3-4. 3-5. 3-6. 3-7.
BLOCK DIAGRAMS
Overall Block Diagram.................................................. DSP Block Diagram...................................................... AV OUT Block Diagram ................................................ USB/ETHER, FL Block Diagram .................................. Power Block Diagram (1/3) .......................................... Power Block Diagram (2/3) .......................................... Power Block Diagram (2/3) .......................................... 3-1 3-2 3-3 3-4 3-5 3-6 3-7
9. 10.
4.
4-1. 4-2. 4-3. 4-4. 4-5. 4-6. 4-7. 4-8. 4-9. 4-10. 4-11. 4-12. 4-13. 4-14. 4-15. 4-16. 4-17. 4-18. 4-19. 4-20. 4-21. 4-22. 4-23. 4-24.
SCHEMATIC DIAGRAMS
This Note Is Common For Schematic Diagrams .......... Frame Schematic Diagram........................................... ANT-001 Board (ANTENNA) Schematic Diagram........ ANT-002 Board (ANTENNA) Schematic Diagram........ FL-194 Board (SWITCH) Schematic Diagram ............. FR-302 Board (FL DRIVER) Schematic Diagram ........ HU-012 Board (USB HUB) Schematic Diagram........... MB-127 Board (EMMA3P DDR2-A) Schematic Diagram (1/14)............................................ MB-127 Board (EMMA3P DDR2-B) Schematic Diagram (2/14)............................................ MB-127 Board (POWER1) Schematic Diagram (3/14)............................................ MB-127 Board (CLK/POWER2) Schematic Diagram (4/14)............................................ MB-127 Board (FLASH/HOST) Schematic Diagram (5/14)............................................ MB-127 Board (USB) Schematic Diagram (6/14)......... MB-127 Board (HDMI/SATA) Schematic Diagram (7/14)............................................ MB-127 Board (AUDIO/VIDEO) Schematic Diagram (8/14)............................................ MB-127 Board (GPIO/JTAG) Schematic Diagram (9/14)............................................ MB-127 Board (IPIO) Schematic Diagram (10/14).......................................... MB-127 Board (ETHERNET) Schematic Diagram (11/14) .......................................... MB-127 Board (RF SDRAM) Schematic Diagram (12/14).......................................... MB-127 Board (DRIVE/RF) Schematic Diagram (13/14).......................................... MB-127 Board (IFD) Schematic Diagram (14/14) ........ USB-016 Board (USB REAR CONNECTOR) Schematic Diagram ...................................................... USB-017 Board (USB FRONT CONNECTOR) Schematic Diagram ...................................................... Waveforms ................................................................... 4-1 4-2 4-3 4-4 4-5 4-6 4-7 4-8 4-9 4-10 4-11 4-12 4-13 4-14 4-15 4-16 4-17 4-18 4-19 4-20 4-21 4-22 4-23 4-24
10-1. Exploded Views ............................................................ 10-1-1. Case Section ........................................................... 10-1-2. Front/Rear Chassis Section .................................... 10-1-3. Main Chassis Section.............................................. 10-1-4. BD Section .............................................................. 10-1-5. Accessories ............................................................. 10-2. Electrical Parts List .......................................................
SECTION 1 SERVICE NOTE

1-1.
BDP-S560
DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)
1. Remove the upper case. (Refer to page 2-1) 2. Insert a clip in the hole of a drive and open a tray.
Note: Use a clip of about 1.2 mm in the diameter clip (Use that of about 1.2 mm in the diameter) hole
tray
1-2.
Work when optical device are replaced
Note: Please do the following work when you replace the optical device.
1. Install it in PC after downloading two set of software from following URL. (About the procedure, refer to the attached Readme.txt file) STEP 1 Microsoft .NET Framework Version 2.0 Redistributable Package (x86) http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5 STEP 2 Microsoft .NET Framework 2.0 Service Pack 1 (x86) http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=79bc3b77-e02c-4ad3-aacf-a7633f706ba5 2. Take the photograph the part of the bar code of the optical device. (Refer to the following picture)
3. Drag-and-drop the bar code photograph to the icon of decode software (BDBUDec). * The decode software is a complete set of BDBUDec, Tasman.Bars.dll, and SavePath. * Because docode software cannot be attached, it separately distributes it. 4. Input the password when you start decode software. * Inquire of each service headquarters because the password cannot be disclosed. 5. Write the decode data to the set. (About the procedure, refer to the attached BU Adjustment flowchart.ppt file)
1-1
BDP-S560
1-3.
TEST DISC
Part No. Description BLX-104 BLX-204 CD (YEDS-18) HLX-504 HLX-505 HLX-506 HLX-507 Single Layer (NTSC) Dual Layer (NTSC) Single Layer (PAL) Dual Layer (PAL) Layer Single Layer Dual Layer
J-6090-199-A J-6090-200-A 3-702-101-01 J-6090-088-A J-6090-089-A J-6090-077-A J-6090-078-A
1-3-1. Operation and Display Check Items 1) BLX-104 1. Select 23.976Hz/1080p 2. Play 4.Motion pictures 3. Check whether player can play back or not 4. Check each outputs Video: Composite/S Video/component/HDMI Audio: Digital out (Coaxial/Optical)/Audio out/5.1Ch output * When 1080/24p monitor is nothing, 1080i (59.94Hz or 50Hz) can use instead of 1080/24p. However this is temporary correspondence. 2) BLX-204 1. Select 1080i (59.94Hz or 50Hz) 2. Play 4.Motion pictures 3. Check whether player can play back or not (Check the picture and sound output) 3) CD (YEDS-18) Check whether player can play back or not (Check the sound output) 4) HLX-504/505 (NTSC), HLX-506/507 (PAL) 1. After displayed Main Menu, select 1.Video 2. Play 1.Color Bar 100% (Check the picture and sound output) 3. Return to Menu 4. Play Demonstration 4:3 or 5.Demonstration 16:9 (Check the picture and sound output)
1-2
BDP-S560
1-3-1-1. BLX-104 Menu Function (1) Main Menu
X X X X X X X
X X X X X
1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed. 1-3-1-2. BLX-104 Menu Function (2) Main Menu
To Main Menu after playback of T62_C1 To Main Menu after playback of T61_C1 To Main Menu after playback from T54_C1 to T60_C1 Sub_menu3 is displayed To Main Menu after playback of T21_C1 To Main Menu after playback of T20_C1 To Main Menu after playback from T2_C1 to T19_C1 Sub_menu1 is displayed
* * *
Note:
When returning to Main Menu after playback from each button of 59.94Hz/1080i, 1. Video Signal of 59.94Hz/1080i is selectively displayed. When returning to Main Menu after playback from each button of 50Hz/1080i, 1. Video Signal of 50Hz/1080i is selectively displayed. 5. AV Sync does not operate.
Txx_ Cxx Chapter No. Title No.
1-3
BDP-S560
To Main Menu after playback of T52_C1 To Main Menu after playback of T51_C1 To Main Menu after playback from T44_C1 to T50_C1 Sub_menu2 is displayed To Main Menu after playback of T42_C1 To Main Menu after playback of T41_C1 To Main Menu after playback from T23_C1 to T40_C1 Sub_menu4 is displayed
* * *
When returning to Main Menu after playback from each button of 59.94Hz/720P, 1. Video Signal of 59.94Hz/720P is selectively displayed. When returning to Main Menu after playback from each button of 23.976Hz/1080P, 1. Video Signal of 23.976Hz/1080P is selectively displayed. 5. AV Sync does not operate.
1-4
BDP-S560
1-3-1-4. BLX-104 Menu Function (4) Sub menu1
X X
X X X
1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu1 after seamless playback from T1_C2 to T1_C13. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu1, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/1080i is selectively displayed. 6) Selection of LPCM Audio t Playback from T2_C1 to T19_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 7) Selection of Dolby AC-3 Audio t Playback of T20_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 8) Selection of Motion Picture t Return to Sub menu1 after playback of T21_C1. 1. ColorBar 100% is selectively displayed on Sub menu1 screen. 9) At the selection of Main Menu, 1. VideoSignal of 1080/59.94i of Main Menu is selectively displayed. 10) AV Sync does not operate.
1-5
BDP-S560
X X
X X X
1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu2 after seamless playback from T43_C2 to T43_C13. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu2, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 23.976Hz/1080P is selectively displayed. 6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 8) Selection of Motion Picture t Return to Sub menu2 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 9) At the selection of Main Menu, 1. Video Signal of 1080/23.976P of Main Menu is selectively displayed. 10) AV Sync does not operate.
1-6
BDP-S560
X X
X X X
1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu3 after seamless playback from T53_C2 to T53_C13. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu3, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 50Hz/1080i is selectively displayed. 6) Selection of LPCM Audio t Playback from T54_C1 to T60_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 7) Selection of Dolby AC-3 Audio t Playback of T61_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 8) Selection of Motion Picture t Return to Sub menu3 after playback of T62_C1. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 9) At the selection of Main Menu, 1. Video Signal of 1080/50i of Main Menu is selectively displayed. 10) AV Sync does not operate.
1-7
BDP-S560
X X
X X X
1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu4 after seamless playback from T22_C2 to T22_C13. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu4, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/720P is selectively displayed. 6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 8) Selection of Motion Picture t Return to Sub menu4 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 9) At the selection of Main Menu, 1. Video Signal of 720/59.94P of Main Menu is selectively displayed. 10) AV Sync does not operate.
1-8
BDP-S560
X X X X X X X X
X X X X X X
1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed. 1-3-2-2. BLX-204 Menu Function (2) Main Menu
To Main Menu after playback of T83_C1 To Main Menu after playback of T62tT82 To Main Menu after playback of T61_C1 To Main Menu after playback of T54_C1-T60_C1tT83_C1-T94_C1 Sub_menu3 is displayed To Main Menu after playback of T67_C1 To Main Menu after playback of T21tT63tT64tT65tT66 To Main Menu after playback of T20_C1 To Main Menu after playback from T2_C1 to T19_C1 Sub_menu1 is displayed
* *
Note:
When returning to Main Menu after playback from each button of 59.94Hz/1080i, 1. Video Signal of 59.94Hz/1080i is selectively displayed. When returning to Main Menu after playback from each button of 50Hz/1080i, 1. Video Signal of 50Hz/1080i is selectively displayed.
Txx_ Cxx Chapter No. Title No.
1-9
BDP-S560
To Main Menu after playback of T70_C1 To Main Menu after playback of T52_C1tT69 To Main Menu after playback of T51_C1 To Main Menu after playback of T44_C1-T50_C1tT71_C1-T81_C1 Sub_menu2 is displayed To Main Menu after playback of T68_C1 To Main Menu after playback of T42_C1 To Main Menu after playback of T41_C1 To Main Menu after playback from T23_C1 to T40_C1 Sub_menu4 is displayed
* *
When returning to Main Menu after playback from each button of 59.94Hz/720P, 1. Video Signal of 59.94Hz/720P is selectively displayed. When returning to Main Menu after playback from each button of 23.976Hz/1080P, 1. Video Signal of 23.976Hz/1080P is selectively displayed.
1-10
BDP-S560
1-3-2-4. BLX-204 Menu Function (4) Sub menu 1
X X
X X X
1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu1 after seamless playback from T1_C2 to T1_C13. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu1, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/1080i is selectively displayed. 6) Selection of LPCM Audio t Playback from T2_C1 to T19_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 7) Selection of Dolby AC-3 Audio t Playback of T20_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 8) Selection of Motion Picture t Return to Sub menu1 after playback of T21_C1. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 9) Selection of AV Sync t Return to Sub menu1 after playback of T67_C1. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 10) At the selection of Main Menu, 1. Video Signal of 1080/59.94i of Main Menu is selectively displayed.
1-11
BDP-S560
X X
X X X
1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu2 after seamless playback from T43_C2 to T43_C13. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu2, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 23.976Hz/1080P is selectively displayed. 6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1 and from T71_C1 to T81_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 8) Selection of Motion Picture t Return to Sub menu2 after playback of T52_C1 and T69. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 9) Selection of AV Sync t Return to Sub menu2 after playback of T70_C1. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 10) At the selection of Main Menu, 1. Video Signal of 1080/23.976P of Main Menu is selectively displayed.
1-12
BDP-S560
X X
X X X
1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu3 after seamless playback from T53_C2 to T53_C13. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu3, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 50Hz/1080i is selectively displayed. 6) Selection of LPCM Audio t Playback from T54_C1 to T60_C1 and from T84_C1 to T94_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 7) Selection of Dolby AC-3 Audio t Playback of T61_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 8) Selection of Motion Picture t Return to Sub menu3 after playback of T62_C1 and T82. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 9) Selection of AV Sync t Return to Sub menu3 after playback of T83_C1. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 10) At the selection of Main Menu, 1. Video Signal of 1080/50i of Main Menu is selectively displayed.
1-13
BDP-S560
X X
X X X
1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu4 after seamless playback from T22_C2 to T22_C13. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu4, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/720P is selectively displayed. 6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 8) Selection of Motion Picture t Return to Sub menu4 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 9) Selection of AV Sync t Return to Sub menu4 after playback of T68_C1. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 10) At the selection of Main Menu, 1. Video Signal of 720/59.94P of Main Menu is selectively displayed.
1-14E
SECTION 2 DISASSEMBLY
This set can be disassembled in the order shown below.
BDP-S560
2-1.
DISASSEMBLY FLOW
SET
2-2. UPPER CASE (Page 2-1)
2-3. FRONT PANEL BLOCK (Page 2-2)
2-5. WIRELESS LAN CARD BLOCK (Page 2-3)
2-6. REAR PANEL BLOCK (Page 2-4)
2-4. BD DRIVE (Page 2-3)
2-7.
MB-127 BOARD (Page 2-4)
2-8. SWITCHING REGULATOR (Page 2-5)
Note: Follow the disassembly procedure in the numerical order given.
2-2.
UPPER CASE
3 upper case 1 tapping screw (tightening torque = 5.5 to 7.5 kgfcm)
2 three screws (tightening torque = 5.5 to 7.5 kgfcm)
1 tapping screw (tightening torque = 5.5 to 7.5 kgfcm)
2-1
BDP-S560
2-3.
FRONT PANEL BLOCK
1 two coaxial cables
3 front panel block
gray
black
2 seven claws
Arrangement of coaxial cable hook slit slit rib hook hook rib hook slit rib slit hook
2-2
2-4.
BD DRIVE
1 harness (PM-159) (CN3)
BDP-S560
5 four screws (BV3) (tightening torque = 5.5 to 7.5 kgfcm)
6 BD drive
4 flexible flat cable (CN1301) 3 flexible flat cable (CN4201) 2 flexible flat cable (CN4261)
2-5.
WIRELESS LAN CARD BLOCK

7 wireless LAN card block 3 harness (UV-008) (CN104) 6 two screws (BV3) (tightening torque = 5.5 to 7.5 kgfcm) 7 wireless LAN card block 5 flexible flat cable (FMH-002) (CN1405) 4 harness (UV-007) (CN601) Arrangement of harness harness (UV-007) wire holder
Note: Do not injure by the sharp edge of the heat sink.
2 harness (MH-120) (CN102) 1 two coaxial cables gray black 6 tapping screw (tightening torque = 5.5 to 7.5 kgfcm)
harness (UV-008)
lead pin
2-3
Harness come to front area.
BDP-S560
2-6.
REAR PANEL BLOCK
6 rear panel block 5 screw (P3) (tightening torque = 5.5 to 7.5 kgfcm) 1 fan harness (CN1403) 2 two screws (tightening torque = 5.5 to 7.5 kgfcm) 3 three screws (BV3) (tightening torque = 5.5 to 7.5 kgfcm)
4 screw (B3) (tightening torque = 4 to 5 kgfcm)
2-7.
MB-127 BOARD
Note: Do not injure by the sharp edge of the heat sink.
5 flexible flat cable (CN1301) 4 flexible flat cable (CN4201)
6 harness (PM-159) (CN801) 7 harness (UV-005) (CN602)
3 flexible flat cable (CN4261) 2 harness (PM-160) (CN301)
8 six screws (BV3) (tightening torque = 5.5 to 7.5 kgfcm)
9 MB-127 board
1 flexible flat cable (FMF-004) (CN1404)
2-4
BDP-S560
2-8.
SWITCHING REGULATOR
2 harness (PM-160) (CN2) 3 harness (PM-159) (CN3) 1 harness (PF-139) (CN1) 4 five screws (BV3) (tightening torque = 5.5 to 7.5 kgfcm)
5 switching regulator
2-9.
CIRCUIT BOARDS LOCATION
switching regulator USB-016 board wireless LAN card
ANT-002 board
MB-127 board
FL-194 board
FR-302 board USB-017 board
HU-012 board ANT-001 board
2-5E
SECTION 3 BLOCK DIAGRAMS

3-1. OVERALL BLOCK DIAGRAM
MB-127 BOARD
J801 Y PB DVD/BD RF VIDEO IC4201 MOTOR DRIVE VIDEO IC807 LINE AMP DDR2 SDRAM AUDIO (ANALOG OUTPUT) IC804 D/A CONVERTER L AUDIO R IC808 VIDEO AMP S VIDEO PR COMPONENT VIDEO OUT
BDP-S560
BD DRIVE
DVD Blu-ray DRIVE
LINE OUT
ANT-001 BOARD
CN201 WIRELESS LAN ANNTENNA
IC204 IC205
IC104 IC105 AUDIO (DIGITAL OUTPUT) IC809 IC801 OPTICAL TRANSMITTER COAXIAL DIGITAL OUT PCM/DTS/DOLBY DIGITAL
ANT-002 BOARD
WIRELESS LAN CARD (WLAN MODULE)
IC1245 +5V 16M S-FLASH IC101 IC1251 64M SDRAM MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL, A/V OUT, HDMI, ETHERNET I/F, USB I/F HDMI
RESET UNSW6VA
OPTICAL
CN702 HDMI OUT
HU-012 BOARD
IC502 2G NAND FLASH ROM
IC501 4M NOR FLASH ROM USB
X601 30MHz
USB-016 BOARD
CN780 EXT
USB-017 BOARD
CN790 (USB)
IC104 USB HUB CONTROLLER
+3.3V
USB ETHERNET REGULATOR IC102 VBUS +3.3V +5V IC103 IC105 UNSW6V X401 27MHz X1201 25MHz DR_VCC8 DR_VCC15 DR_VCC33 UNSW3.3V UNSW6V SW5VD +3.3V (AV) DCSW5V DCSW3.3V VBUS +5V POWER +3.3V (HDMI) SW3.3V MC-10121F1_SW3.3V DLL/HDVDD_1.05V PLL_1.05V DDR2_1.8V CORE_1.05V X1101 50MHz REGULATOR IC301 IC302 IC304 IC307 IC308 IC309 IC310 IC311 IC601 IC704 IC705 IC802 IC1280 IC1351 PS802 PS803 PS804 UNSW6VA UNSW12VA UNSW-9VA SWITCHING REGULATOR (AC IN) PS301 PS303 PS304 DR_SW12V DR_SW5V UNSW6V UNSW12V CN1101 IC1101 ETHERNET PHY LAN (100)
FR-302 BOARD
ND701 FLUORESCENT INDICATOR TUBE IC1404 IC702 D708 (Blue) D709 (White) D710 WLAN FL DRIVER P FAIL UNSW6V
Video/Audio +3.3V Video -5V Line AMP B+/BIC701 IC1403 SUB SYSTEM CONTROL UNSW12V REMOTE CONTROL RECEIVER
IC805 IC806 REGULATOR
T701
Q706, Q707 DC/DC CONVERTER
FR_6V
FL-194 BOARD
S331
I/1
S701 S704 S702 Z 05 x N
IC1401 FAN CONTROL
M
M1401 (FAN)
3-1
BDP-S560
3-2.
DSP BLOCK DIAGRAM

MB-127 BOARD (1/3)
CN1301 BD_RF+ 32 BD_RF31 DVD_RF+ 29 DVD_RF28 25 24 23 22 20 19 18 17 6 8 A B C D E F G H SDIO SCLK A7 A6 A5 A4 A12 B11 B12 A11 A9 A10 B9 B10 RFP RFN RFP2 RFN2 A B C D E F G/FOP H/FOM
IC101
(1/3)
MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL, A/V OUT, HDMI, ETHERNET I/F, USB I/F AE1, AD3, AF4
D0DQ0-D0DQ15 D0MA0D0MA12 D0MA0-D0MA12, 14, 15 D0CS1B, D0BA1, D0BA0 D0DT0 D0CLK0 D0CLK0B D0CKE D0CS0B
IC104 DDR2 SDRAM
L1-L3 K9 J8 K8 K2 L8 D0DQ16-D0DQ31 D0MA0-D0MA3, D0MA6-D0MA12, D0MA14, 15 L1-L3 K9 J8 K8 K2 L8 D1DQ0-D1DQ15 D1MA0D1MA12 D1MA0-D1MA12, 14, 15 L1-L3 K9 J8 K8 K2 L8 D1DQ16-D1DQ31 D1MA0-D1MA3, D1MA6-D1MA12, D1MA14, 15 L1-L3 K9 J8 K8 K2 L8
BA0-BA2 ODT CK /CK CKE /CS
IC1245 16M S-FLASH SFSIO0 SFSIO1 SFSIO2 SFSIO3 SFSCK SFCS0B K4 L3 J2 J3 L4 K3 5 2 3 7 6 1 SI/SIO0 SO/SIO1 W/SIO2 HOLD/SIO3 SCK CS
H3 SDIO G2 SDCK H4 SDCS0B N4 PSI4 B15 ADIN1 P5 PSI6 INSW_BU M3 PSI5
AF7 Y2 Y1 AB5 AG4
SEN_LDD 7 PI_CONT 34 THERMO 9 XRST 5
IC105 DDR2 SDRAM
MD[0]-MD[15] MA[0]-MA[11] MBA0 MBA1 MCLKOUT MCKE F14 F12 H13 G13 20 21 38 37
IC1251 64M SDRAM BA0 BA1 CLK CKE D0CLK1 AK2 D0CLK1B AK1
BD DRIVE
DVD Blu-ray DRIVE
37 39 36 38 45 44 40 41 43 42
SA_A+ SA_ASA_B+ SA_BFD1 FR1 FD2 FR2 TD TR
35 36 37 38 18 17 14 15 13 12
SAO1+ SAO1SAO2+ SAO2FCO+ FCOTLO+ TLOTKO+ TKOIC4201
SAIN1 28 SAIN2 29 FCIN 22 TLIN 23 TKIN 24
J7 PA4 K8 PA5 E1 FDRV E2 DAOUT0 F1 TDRV
EMI_DT0EMI_DT15 EMI_DT0-EMI_DT15 IC501 4M NOR FLASH ROM RESET 12 EMI_DT0EMI_DT7 IC502 MC-10121F1_XRST IC204 DDR2 SDRAM
3 2 4 5 6
CN4201 B /B A /A INSW
MOTOR DRIVE 39 40 41 42 SLO1+ SLO1SLO2+ SLO2SLIN1 31 SLIN2 32 C2 SDRV2 D2 SDRV1
EMI_AD1-EMI_AD18
1
D1CS1B, D1BA1, D1BA0 D1DT0 D1CLK0 D1CLK0B D1CKE D1CS0B AR18, AL19, AM15 (3/3) (SEE PAGE 3-4)
U 10 V 9 W 8 HU+ 11 HU12 HV+ 13 HV14 HW+ 15 HW16 CN4261 LD+ 1 LD2 5 3 TRAY-OUT TRAY-IN
45 U 46 V 47 W 1 2 3 4 5 6 HU+ HUHV+ HVHW+ HW-
2G NAND FLASH ROM SPIN CTL1 CTL2 FG 54 49 48 51 D1 D12 D13 M2 MDRV PB0/SW1 PB1/SW2 FG FCSB1 AM29 9 nCE
AR12 AP25 AR25 AM19 AP13
IC205 DDR2 SDRAM
XO T1 10 LDO+ 9 LDOLDIN 8 XI R1 X2 J1 L2 PC2 R6 P50 X1 K1
X401 27MHz D1CLK1 AP6 D1CLK1B AR6
X1201 25MHz
05
3-2
BDP-S560
3-3.
AV OUT BLOCK DIAGRAM

MB-127 BOARD (2/3)
IC808 GPIO12 G29 ASPECT0 VIDEO AMP Q818 MIX, LINE DRIVE
IC101
(2/3)
GPIO13 H28
ASPECT1
1 S1
MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL, A/V OUT, HDMI, ETHERNET I/F, USB I/F VAG H35 VAB F35 VAR G34 VAY F33 VAC H33 GPIO27 AK28 HD_Y HD_PB HD_PR SD_Y SD_C XVMUTE
J801 10 YIN 12 PBIN 14 PRIN 8 SYIN 3 SCIN 16 PS1 15 PS2 17 LPFSW YOUT 23 PBOUT 21 PROUT 19 Y PB PR COMPONENT VIDEO OUT
SYOUT 26 SCOUT 30 VOUT 28
Y C S VIDEO
GPIO11 J28
FORMAT1
IC804 D/A CONVERTER IC807 AO1BD AO1MCK AO1BCK AO1LRCK S0DOUT S0CKOUT GPIO28 GPIO29 E28 G27 E29 F27 D34 D35 AJ27 AK26 MC-10121F1_CSIO_DO MC-10121F1_CSIO_CKO MC-10121F1_CSIO_DAC2_XCS DAC_XRST 3 1 2 4 8 7 6 5 SDTI MCLK BICK LRCK CDTI CCLK CSN PDN LINE AMP AOUTL+ 12 AOUTL- 11 AOUTR+ 10 AOUTR- 9 3 2 5 6 + + VIDEO 1 7 L AUDIO R
LINE OUT
D802 DZFL 16
Q806, Q811, Q812 MUTE DRIVE IC809 RESET
Q816 MUTING
GPIO26 AH27 ATX C30
XAMUTE
1 OUT
VDD 2
UNSW6VA Q801 BUFFER COAXIAL DIGITAL OUT PCM/DTS/DOLBY DIGITAL OPTICAL
IC801 OPTICAL TRANSMITTER
HTXP0 HTXN0 HTXP1 HTXN1 HTXP2 HTXN2 HTXCP HTXCN
M34 M35 L34 L35 K34 K35 N34 N35
TX0P TX0N TX1P TX1N TX2P TX2N TCKP TCKN 4 Y
IC703 BUFFER A 1
TX0P TX0N TX1P TX1N TX2P TX2N TCKP TCKN
CN702 TMDS DATA0 + 7 TMDS DATA0 9 TMDS DATA1 + 4 TMDS DATA1 6 TMDS DATA2 + 1 TMDS DATA2 3 TMDS CLOCK + 10 TMDS CLOCK 12 HPD 19 HDMI OUT
HHPD T31
HDSDA V27 HDSCL U27 (3/3) (SEE PAGE 3-4)
Q701 LEVEL SHIFT Q702 LEVEL SHIFT
SDA SCL
16 15
CEC
CEC
13
05
3-3
BDP-S560
3-4. USB/ETHER, FL BLOCK DIAGRAM
MB-127 BOARD (3/3)
IC101 (3/3) MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL, A/V OUT, HDMI, ETHERNET I/F, USB I/F USBDP2 V34 USBDM2 W34 USBXO AE35 USBXI AF35 X601 30MHz IC1101 ETHERNET PHY CN1101 ETRXD0 U30 ETRXD1 U31 ETRXER U29 ETTXD0 V31 ETTXD1 V30 ETTXEN V32 ETMDIO T33 ETMDC T32 ETCRS U33 ETREFCLK T34 MC-10121F1_XRST X1101 50MHz 18 RXD0 17 RXD1 21 RX_ER 23 TXD0 24 TXD1 6 TX_EN 4 MDIO 2 MDC 36 CRS_DV 14 REFCLK 5 nRST RXP 32 RXN 31 TXP 29 TXN 28 1 2 5 6 LAN (100)
USB-016 BOARD
CN602 DP DM 2 2 3 3 CN781 D+ DCN780 3 2 EXT
ANT-001 BOARD HU-012 BOARD

CN1405 14 1 13 2 9 6 CN105 EXT_POW_ON/OFF RF_ON/OFF XHUB_RST IC104 USB HUB CONTROLLER 26 RESET CN601 CN103 2 2 3 3 31 USBUP_DP 30 USBUP_DM USBDN2_DP 4 USBDN2_DM 3 XTAL2/CLKIN_EN 32 XTAL1/CLKIN 33 X101 24MHz USBDN1_DP USBDN1_DM 2 1 DP DM CN101 EXTERNAL POWER ON RESET RF DISABLE 3 3 1 1

ANT-002 BOARD
9 9 11 11
USBDP1 AA34 USBDM1 AB34
DP DM
USB-017 BOARD
CN104 DP DM 2 4 3 3 CN791 D+ DCN790 3 2
(USB)
IC1403 SUB SYSTEM CONTROL EXT_POW_ON/OFF EXT_POW_ON 11 RF_ON/OFF RF_ON 12 XHUB_RST XHUB_RST 16
FR-302 BOARD
CN1404 CN701 10 10 8 8 11 11 7 DIN 8 CLK 9 STB IC702 FL DRIVER LED1 1 Q710 LED DRIVE D709 (White) D708 (Blue) D708, D709 (BLU-RAY DISC INDICATOR) GRD1-GRD8, GRD11, GRD12 SEG1-SEG16 ND701 FLUORESCENT INDICATOR TUBE LED_DT LED_CK FLD_STB
CN902 3 4 6 5 RXD TXD DIPSW0 DIPSW1 F31 G30 AK27 AG28 UA0RXDB UA0TXDB GPIO21 GPIO22 S2DIN S2DOUT S2CKIN S2CSB GPIO25 GPIO15 C34 C33 C32 B33 AJ26 F29 IF_SDO IF_SDI IF_SCK XIF_CS SYSCON_REQ START_BIT MC-10121F1_XRST 27 26 25 43 36 39 IF_SDO IF_SDI IF_SCK XIF_CS SYSCON_REQ START_BIT FLD_SDO FLD_SDO 63 FLD_SCK FLD_SCK 64 XHUB_RST FLD_STB 2
(JIG)
SIRCS_IN 24 35 SYSCON_RST
SIRCS
IC701 17 17 REMOTE CONTROL RECEIVER
RSTSWB H22 PCIRSTB AD31
KEY1 48 (1/3) (SEE PAGE 3-2)
KEY1 KEY2 KEY3
S704 13 13 14 14 15 15 x S701 Z S702 N
LED2 2
Q709 LED DRIVE
1 2
MC-10121F1_XRST KEY2 47 CEC 22 CEC KEY3 46 38 37 3 6 RXD1 TXD1 MODE /RESET
LED3 3
Q711 LED DRIVE
D710 WLAN
(2/3) (SEE PAGE 3-3) CN1402 3 4 2 7 IF_RXD IF_TXD MODE RESET
(IFCON FLASH WRITTER)
05
3-4
BDP-S560
3-5.
POWER BLOCK DIAGRAM (1/3)

MB-127 BOARD (1/2)
CN2 15 CN301 15
IC1351 +8V REGULATOR CN1301 VCCBLDCON LDEN 10
DR_SW12V
PS304
DR_SW12V
6 VCC
Vo 1 FB 2 EN 4
DR_VCC8
8.0V
12
DR_SW5V
12
DR_SW5V L1287 IC4201 MOTOR DRIVE IC1280 +1.5V/+3.3V REGULATOR 8 VIN1 Lx 7 1 VIN2 FB 9 LDOUT 2 ENLDO 5 DR_VCC15 DR_VCC33 ATA_PCONT2
26 11 14 CN4201 R4218 18
5V_PD 5.0V 3.3V HB+
BD DRIVE
CN1404 3, 4 UNSW6V FLD_PCONT LED_DIMMER FR_6V FLD_PCONT LED_DIM IT_3.3V
7 6 1
C
POWER-2 (SEE PAGE 3-6)
7-9
7-9
UNSW6V
PS301
UNSW3.3V UNSW6V UNSW6V IC301 IC1404 P FAIL VOUT 1 IC304 SW+5V REGULATOR PCONT3 PCONT3 IC802 +3.3V (AV) IC704 +3.3V REGULATOR DCSW5V IC703 BUFFER PCONT1 +3.3V (HDMI) +3.3V REGULATOR IC302 DCSW5V REGULATOR CN1402 VCC UNSW+3.3V REGULATOR PFAIL USB_VBUS_PCONT IC705 +5V REGULATOR UNSW3.3V IC601 +5V REGULATOR VBUS CN602 VBUS
(AC IN) 1, 2
CN101
USB-016 BOARD
CN781 4 4 CN780 1 EXT
SW5VD
+5V POWER
CN702 +5V POWER 18
HDMI OUT
(IFCON FLASH WRITER)
SWITCHING REGULATOR
CN601 VBUS CN302
VBUS
D
UNSW6V POWER-3 (SEE PAGE 3-7)
3, 4
3, 4
UNSW12V
PS303
UNSW12V L303 2 VIN SW 3 FB 5 EN 7
UNSW12V DCSW3.3V PCONT1 D308 Q306, Q309 B+ SWITCH PCONT3 Q305 SWITCH DCSW3.3V IC307 DLL+1.05V REGULATOR DLL/HDVDD_1.05V FB303 SW3.3V MC-10121F1_SW3.3V
POWER
A
POWER-2 (SEE PAGE 3-6) CN902 3.3V 1 (JIG)
IC311 SW+3.3V REGULATOR
11 1 CN3 3
ATA-PCONT P-ON
11 1 CN801 3
ATA_PCONT KEY0
PCONT2
IC308 PLL+1.05V REGULATOR
PLL_1.05V
UNSW6VA
PS803
IC805 +3.3V REGULATOR IC809 RESET SW5VD
CONTROL
B
UNSW12VA
PS802
Q808, Q809 B+ SWITCH IC807 LINE AMP
CN1 1 1
UNSW-9VA
PS804
Q805, Q807 B- SWITCH Q813, Q815 B- SWITCH IC806 -5V REGULATOR IC808 VIDEO AMP PCONT2 IC804 D/A CONVERTER
CN331 S331
I/1
05
FL-194 BOARD
3-5
3, 4
UNSW6V
BDP-S560
3-6.

MB-127 BOARD (2/2)
UNSW6V DCSW5V L304 FB301 Q301, Q302 SWITCHING L301 FL303, FL307, FL308
10 V5DRV 4 V5FILT Q307 REGULATOR CONTROL 1 EN_PSV
DRVH 13 DRVL 9 VOUT 3
D301
PCONT2
CORE_1.05V
IC1401 FAN CONTROL 1 Viv Vout 3 CONT 2 ADJ 4 Q1408 FAN SPEED CONTROL FAN_CONT0 FAN_CONT1 FAN_CONT2 FAN_DET1 CN1403 3 2 1
IC309 MULTI REGULATOR
M1401 (FAN)
UNSW12V
FB302
Q303, Q304 SWITCHING
L302
FL304, FL305
DDR2_1.8V
DDR2_1.8V
10 V5DRV 4 V5FILT PCONT4 Q308 REGULATOR CONTROL 1 EN_PSV
DRVH 13 DRVL 9 VOUT 3
IC104 DDR2 SDRAM
IC105 DDR2 SDRAM
IC204 DDR2 SDRAM
IC205 DDR2 SDRAM
IC310 MULTI REGULATOR
A
POWER DR_VCC15 DR_VCC33 FLD_PCONT UNSW3.3V PLL_1.05V DLL/HDVDD_1.05V +3.3V (AV) +3.3V (HDMI) DDR2_1.8V CORE_1.05V LED_DIMMER MC-10121F1_SW3.3V SW3.3V SW5VD
CN1405 2, 4 SW3.3V P_CON_F5V VBUS_DET SW3.3V P_CON_F5V VBUS_DET
E
10 6
DR_VCC33 MC-10121F1_SW3.3V FB1101 L601 IC501 IC1403 USB_VBUS_PCONT LDEN VCCBLDCON F30 GPIO57 E12 PB3/SW4 E3 DAOUT1 IC101 MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL, A/V OUT, HDMI, ETHERNET I/F, USB I/F SUB SYSTEM CONTROL 34 LED_DIMMER 53 FLD_PCONT FAN_CONT0 FAN_CONT1 FAN_CONT2 FAN_DET1 31 21 28 20 PCONT4 PCONT2 PCONT1 PCONT3 58 57 54 55 4M NOR FLASH ROM IC502 2G NAND FLASH ROM IC1245 16M S-FLASH IC1251 64M SDRAM FB401 FB601 FB1102
FB201 FB101
IC1101 ETHERNET PHY
IC801 OPTICAL TRANSMITTER
FAN_CONT0 FAN_CONT1 FAN_CONT2 FAN_DET1
PCONT4 PCONT2 PCONT1 PCONT3 ATA_PCONT ATA_PCONT2
FR-302 BOARD
PCON_F5V 15 VBUS_DET 17 P_CON_F5V VBUS_DET CN701 3, 4 FR_6V FLD_PCONT PS701 Q703, Q704 B+ SWITCH L701 Q706, Q707 DC/DC CONVERTER T701 F1, F2 D707 VEE ND701 FLUORESENT INDICATOR TUBE
33 ATA_PCONT1 32 ATA_PCONT2
C
POWER-1 (SEE PAGE 3-5) LED_DIM IT_3.3V
7 Q705, Q708 B+ SWITCH 6 1 R725 LED B+
D703-D706 RECT
B
PFAIL KEY0 CONTROL
45 PFAIL 49 KEY0
IC702 FL DRIVER
IC701 REMOTE CONTROL RECEIVER 05
3-6
BDP-S560
3-7.

UH-012 BOARD
CN102 3, 4 UNSW6V 5.8V IC105 +5V REGULATOR VBUS
D109
USB-017 BOARD
CN104 VBUS CN791 4 4 CN790 1 (USB)
D110
IC102
FB101 IC104 USB HUB CONTROLLER P_CON_P1 VBUS_DET
D
+3.3V REGULATOR
D111
12 PRTPWR1 27 VBUS_DET CN101 4, 6 +5V
+5V REGULATOR
VBUS
CN103 4
CN105 11, 13
E
SW3.3V P_CON_F5V VBUS-DET
VDD3.3V P_CON_F5V VBUS-DET
5 9
05
3-7E
4, 6
IC103
SECTION 4 SCHEMATIC DIAGRAMS

4-1. THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS
All capacitors are in F unless otherwise noted. pF : F. 50V or less are not indicated except for electrolytics and tantalums. All resistors are in ohms, 1/4 W (Chip resistors : 1 /10 W) un-less otherwise specified. k=1000, M=1000k. % : indicates tolerance. Caution when replacing chip parts. New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum capacitor, because it is damaged by the heat. Constants of resistors, capacitors, ICs and etc with XX indicate that they are not used. In such cases, the unused circuits may be indicated. All variable and adjustable resistors have characteristic curve B, unless otherwise noted. : nonflammable resistor : fusible resistor : panel designation f : internal component. : adjustment for repair. : B+ Line : B Line Circled numbers refer to waveforms. Voltages are dc between measurement point. Readings are taken with a color-bar signals on Blu-ray disc. Readings are taken with a digital multimeter (DC 10M). Voltage variations may be noted due to normal production tolerances. Note: The components identified by mark or dotted line with mark are critical for safety. Replace only with part number specified. Note: Les composants identifis par une marque sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.
BDP-S560
When indicating parts by reference number, please include the board name.
4-1
BDP-S560
4-2.
FRAME SCHEMATIC DIAGRAM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
USB-016 BOARD
CN3 PM-159
HARNESS
UV-005 CN781 5P
HARNESS
FAN
CN1403 3P CN602 5P UV-007

HARNESS
CN801 5P
CN601 5P D CN1301 45P
SWITCHING REGULATOR (SRV2192U)
BD DRIVE
CN4201 18P
MB-127 BOARD
G CN2
CN4261 5P CN301 15P CN1404 17P
H PM-160
HARNESS
CN302 4P
CN1405 14P
I CN1
FMF-004
FFC
MH-120
HARNESS
FMH-002
FFC
PF-139 K
FR-302 BOARD
COAXIAL CABLE (WITH U.F.L CN) CN331 2P
CN701 17P
CN102 4P
CN105 14P
CN103 5P CN104 5P
AC IN
HARNESS
CN101 12P
COAXIAL CABLE (WITH U.F.L CN) B to B
HU-012 BOARD
UV-008
HARNESS
FL-194 BOARD
M
05
ANT-002 BOARD
CN301 3P
ANT-001 BOARD
CN201 3P
WIRELESS LAN CARD
USB-017 BOARD
CN791 5P
4-2
BDP-S560
4-3.
ANT-001 BOARD (ANTENNA) SCHEMATIC DIAGRAM See page 5-2 for printed wiring board.
- Ref. No.: ANT-001 board; 20,000 series -
ANT-001 BOARD
A ANTENNA
CN201 3P PAT201 GRY WIRELESS LAN CARD
B
05
4-3
BDP-S560
4-4.
ANT-002 BOARD (ANTENNA) SCHEMATIC DIAGRAM See page 5-3 for printed wiring board.
ANT-002 BOARD
A ANTENNA
CN301 3P PAT301 BLK WIRELESS LAN CARD
B
05
4-4
BDP-S560
4-5.
FL-194 BOARD (SWITCH) SCHEMATIC DIAGRAM See page 5-4 for printed wiring board.
- Ref. No.: FL-194 board; 20,000 series -
FL-194 BOARD
A SWITCH
S331 CN331 2P
B
05
SWITCHING REGULATOR
GND P ON
2 1
4-5
BDP-S560
4-6.
FR-302 BOARD (FL DRIVER) SCHEMATIC DIAGRAM See page 5-5 for printed wiring board.
- Ref. No.: FR-302 board; 20,000 series -
6
Note: The components identified by mark or dotted line with mark are critical for safety. Replace only with part number specified.
10
11
12
13
FR-302 BOARD
A FL DRIVER
XX MARK:NO MOUNT NO MARK:PB MODE
Note: Les composants identifis par une marque sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.
ND701 FLUORESCENT INDICATOR TUBE
CN701 17P
C719 10 PS701 0.4A 72V
Q705, Q708 B+ SWITCH 12G 11G P16 P15 P14 P13 P12 P10 P11 1G 2G 3G 4G 5G 6G 7G 8G P9 P8 P7 P6 P5 P4 P3 P2 P1 F1 Q705 2SB1197K-T-146-R 5.7 R719 2.2k 4.9 SEG16 SEG15 SEG14 SEG13 SEG12 R718 4.7k SEG10 SEG11 LED_CK D708 CL-482S-HB8-SD-TS (BLUE) D709 CL-270S-WS-SD-TS (WHITE) D710 CL-197HG5-CD-T GRD12 GRD11 GRD1 GRD2 GRD3 GRD4 GRD5 GRD6 GRD7 GRD8 WLAN 5.6 R717 270 R723 220 R720 180 D708, D709 (BLU-RAY DISC INDICATOR) F2 31 32
IT_3.3V GND FR_6V FR_6V GND LED_DIM MB-127 BOARD (14/14) CN1404 FLD_PCONT LED_CK GND LED_DT FLD_STB White_LED KEY 1 KEY 2 KEY 3 GND
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Q708 MUN2213T1 3.3 R724 10k
2 JL703
4 JL704
6 JL705 JL706
8 JL707 JL708
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 JL722 JL723 JL724 JL725 JL726 JL727 JL728 JL709 JL710 JL712 JL713 JL714 JL715 JL716 JL721 JL729 JL730 JL731 SEG2 JL732 SEG1 JL711
SEG9
SEG8
SEG7
SEG6
SEG5
SEG4 GRD8
(SEE PAGE 4-21)
LED_DT FLD_STB
GRD1
GRD2
GRD3
GRD4
GRD5
GRD6
0.1
5.4
Q709 MUN2213T1 0
5.4
Q710 MUN2213T1 0
5.4
Q711 MUN2213T1 0
C715 0.01
GRD7
SEG3
C717 150p -18.7 -18.7 -18.8 -18.7 -18.7 -18.7 -18.8 -18.7 GR8 GR9 3.3
SIRCS
44 43 42 41 40 39 38 37 36 35 34 VDD GR1 GR2 GR3 GR4 GR5 GR6 GR7 VSS 0 0 JL719 R715 100k JL720 1.9 0 Q709-Q711 LED DRIVE
1 2 3 4 5 6
LED1 LED2 LED3 LED4 OSC DOUT DIN CLK STB K1 K2 SG3 SG4 SG5 SG6 SG7 SG8 VSS VDD SG9 SG1 SG2
GR10 GR11 GR12
33 32 31 30 29 28 27 26 25 24 23 -21.2 -16.2 -21.4 -13.7 -21 -21 -21 -13.7 -9 -18.5 GRD11 GRD12 C718 XX
E
IC701 GP1UE27XK0VF
R721 2.2k LED_DT R712 2.2k LED_CK FLD_STB
R716 XX
IC702
FL DRIVER IC702 PT6315
VEE SG16 SG15 SG14 SG13 SG12 SG11 SG10
SEG16 SEG15 SEG14 SEG13 SEG12 SEG11 SEG10
0.1 3 2.6
7 8 9 10 11
GND
VCC
OUT
IC701
3 REMOTE CONTROL RECEIVER C714 0.01 S702 S701 S704
F
R725 47 C704 47 16V C708 XX
3.3
3.3
12 13 14 15 16 17 18 19 20 21 22 3.3 -21 -18.5 -21 -20.9 -13.8 SEG8 -13.6 SEG9 -11.1 -11.2 SEG6 -11.5 SEG7
C707 0.01
SEG1
SEG2
SEG3
SEG4
G
5.7 C701 0.1 R701 10k Q704 2SB1197K-T-146-R
R704 XX 5.6 R707 3.9k 4.9 R705 1k R706 XX
Q706, Q707 DC-DC CONVERTER
L701 100uH
D705 1SS355TE-17
JL701
C716 0.1
Q706 2SC2411K-T-146-CR 5.6 C705 6800p 250V T701 DC-DC CONVERTER TRANSFORMER 2 10 D706 1SS355TE-17 D703 1SS355TE-17 D707 MAZ8047GMLS0
C713 0.1
Q703, Q704 B+ SWITCH
C703 100 16V
JL702
0.1 3.3 Q703 MUN2213T1
1 D704 1SS355TE-17
5.6 Q707 2SC2411K-T-146-CR
I
C702 XX 05
SEG5
R714 4.7k
C709 XX
C710 XX
C711 0.1
C712 22 50V
4-6
BDP-S560
4-7.
HU-012 BOARD (USB HUB) SCHEMATIC DIAGRAM See page 5-6 for printed wiring board.
- Ref. No.: HU-012 board; 20,000 series -
10
11
12
13
R132 XX
14
CN105 14P 1 2 3 4 5 Ext_PowOn/Off RF_On/Off P_CON_W5V P_CON_H3.3V P_CON_F5V XHUB_RST GND E_VBUS_DET VBUS_DET GND SW3.3V GND SW3.3V GND
15
HU-012 BOARD
A USB HUB
R143 XX R147 0
IC105
+5V REGULATOR GND IC105 TK73651AU3G0L-C ADJ Vin Vo Vc 1 3.3 2 5.8 3 4 5 5 5 R154 XX C110 XX
6 R131 XX R158 XX R163 XX R162 0 R133 XX R155 XX JL104 7 8 9 10 11 R164 XX 12 13 14
MB-127 BOARD (14/14) CN1405 (SEE PAGE 4-21)
R152 XX
R148 XX R149 XX D109 MA2J1110GLS0 R116 XX R102 XX C147 XX
5 DET
4 VDD VSS 2 RT 3
C
CN102 4P MB-127 BOARD (3/14) CN302 (SEE PAGE 4-10) 5.8V 5.8V GND GND 4 3 2 1 C129 220 10V C101 XX R103 XX C146 1 C112 22 16V R111 10k 0.5% C111 1 R101 XX R129 XX
HYS1 1
IC108 XX
C142 XX
R150 750 0.5%
R159 10k
C128 100 10V
C148 XX
R161 XX
IC102
+3.3V REGULATOR ADJ Vo IC102 SI-3010KM-TLS
C134 XX
FB101
C119 4.7
C120 XX
GND
Vin
E
Vc 8 7 6 5 1 3.3 IC107 XX
C143 0.1 3 2 1
R122 XX
R121 XX
R126 100k
R130 100k
R128 100k
C121 0.1
R125 100k R139 XX
2 5.8
4 3.3
5 IC106 XX C106 XX 3.3
R138 XX 5 R137 XX CN103 5P 1 2 GND DP DM VBUS GND MB-127 BOARD (6/14) CN601 (SEE PAGE 4-13)
R108 1k 0.5%
R146 22k 0.5% R114 XX
D110 MA2J1110GLS0
3 4 5
C139 XX
C102 XX
R105 XX
C144 XX
SDA/SMBDATA/NON_REM1
RESET
NC
NC
HS_IND/CFG_SEL1
SCL/SMBCLK/CFG_SEL0
VDD33(IO)
NC
C104 22 16V
R113 XX
C140 XX
R110 10k 0.5%
C107 47 16V
C133 XX
27 26 25 24 23 22 21 20 19 C117 0.1 R136 XX 28 VBUS_DET
C131 XX
G
CN101 12P Vin Vc RF Disable GND External Power On Reset
NC 18 OCS2 17 PRTPWR2 16 VDD33(REG) 15 VDDCR18 14 OCS1 13 PRTPWR1 12 TEST 11
IC103
+5V REGULATOR ADJ Vo IC103 SI-3010KM-TLS C114 12p
R118 100k C113 12p R120 1M X101 24MHz R135 XX
29 VDDA33 30 USBUP_DM 31 USBUP_DP 32 XTAL2/CLKIN_EN 33 XTAL1/CLKIN 34 VDDPLL18
JL102
R156 XX
GND
1 2 3 4 5 6 7 8 9
10 11 12 R107 XX
LOCAL_PWR/NON_ REM0/SUSP_IND_N
JL101
R157 XX C126 0.1
C127 1
1 3.3
2 5.8
4 5
5 5 C115 0.1 C116 1 R109 82k R145 82k D111 MA2J1110GLS0 R115 XX R119 12k 0.5%
35 RBIAS USBDN1_DM USBDN2_DM 36 VDDPLLREF/VDDA33 USBDN1_DP VDDA33 37 VSS (FLAG) USBDN2_DP
H
WIRELESS LAN CARD
+5V GND +5V GND GND DP GND DM
VDDA33 10 C122 0.1 NC NC NC NC
C108 XX
C135 XX CN104 5P 1 2 3 C125 0.1 C132 0.1 4 5 GND DP DM VBUS GND USB-017 BOARD CN791 (SEE PAGE 4-23)
C136 XX
IC104
USB HUB CONTROLLER IC104 USB2512A-AEZG
C124 0.1
GND
C118 0.1
C123 0.1
R144 XX
R123 0
L104 18nH
R153 XX R127 XX
1 L101 0uH 2
3 L102 0uH
4 R124 0 L103 18nH
C103 XX
C138 XX
C137 XX
C145 XX
C105 22 16V
R151 XX
C141 XX
C109 47 16V
R112 10k
R160 10k
C130 100 10V
D104 XX
D105 XX
D106 PGB1010603NR
D107 PGB1010603NR
05
4-7
BDP-S560
4-8.
MB-127 BOARD (EMMA3P DDR2-A) SCHEMATIC DIAGRAM (1/14) See page 5-7 for printed wiring board.
1 2 3 4 5 IC101
R105 XX IC101 MC-10121F1-207-TA1-A
- Ref. No.: MB-127 board; 10,000 series 6 (1/15) 7 8 9 10 11 12 13 14 15 16 17 18
MB-127 BOARD (1/14)

A MC10121F1 DDR2-A
XX MARK:NO MOUNT
MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL, A/V OUT, HDMI, ETHERNET I/F, USB I/F
C115 C116
0.1 0.1 0.1 0.1 C103 0.001 C104 XX C105 0.001
V9 Y9 AD9 AF9
D0VDD10 D0VDD10 D0VDD10 D0VDD10
D0DQ0 D0DQ1 D0DQ2 D0DQ3 D0DQ4
W7 W5 Y6 W6 AA4 Y7 AA6 AA3 U7 T5 U3 U6 V6 V4 V7 W3
JL1022 JL1023 JL1024 JL1025 JL1026 JL1027 JL1028 JL1029 JL1030 JL1031 JL1032 JL1033 JL1034 JL1035 JL1036 JL1037
D0DQ0 D0DQ1 D0DQ2 D0DQ3 D0DQ4 D0DQ5 D0DQ6 D0DQ7 D0DQ8 D0DQ9 D0DQ10 D0DQ11 D0DQ12 D0DQ13 D0DQ14 D0DQ15 D0MA0 D0MA1 JL117 JL118 JL119 JL120 JL121 JL122 JL123 JL124 JL125 JL126 JL127 JL128 JL129 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 D0MBA0 D0MBA1 JL130 JL131 JL132 L2 L3 L1 L2 L3 L1 L2 L3 L1 BA0 BA1 BA2 DQ0 G8 DQ1 G2 DQ2 H7 DQ3 H3 DQ4 H1 DQ5 H9 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 G8 G2 H7 H3 H1 H9 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 G8 G2 H7 H3 H1 H9 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 JL147 JL148 JL149 JL150 JL151 JL152 JL153 JL154 JL155 JL156 JL157 JL158 JL159 JL160 JL161 JL162 D0DQ0 D0DQ1 D0DQ2 D0DQ3 D0DQ4 D0DQ5 D0DQ6 D0DQ7 D0DQ8 D0DQ9 D0DQ10 D0DQ11 D0DQ12 D0DQ13 D0DQ14 D0DQ15 D0MBA0 D0MBA1 D0MBA2 JL187 JL188 JL189 L2 L3 L1 L2 L3 L1 L2 L3 L1 BA0 BA1 BA2 D0MA0 D0MA1 D0MA2 D0MA3 D0MA14 D0MA15 D0MA6 D0MA7 D0MA8 D0MA9 D0MA10 D0MA11 D0MA12 JL174 JL175 JL176 JL177 JL178 JL179 JL180 JL181 JL182 JL183 JL184 JL185 JL186 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 DQ0 G8 DQ1 G2 DQ2 H7 DQ3 H3 DQ4 H1 DQ5 H9 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 G8 G2 H7 H3 H1 H9 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 G8 G2 H7 H3 H1 H9 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 JL1005 JL1006 JL1007 JL1008 JL1009 JL1010 JL1011 JL1012 JL1013 JL1014 JL1015 JL1016 JL1017 JL1018 JL1019 JL1020 D0DQ16 D0DQ17 D0DQ18 D0DQ19 D0DQ20 D0DQ21 D0DQ22 D0DQ23 D0DQ24 D0DQ25 D0DQ26 D0DQ27 D0DQ28 D0DQ29 D0DQ30 D0DQ31 IC102 XX IC106 XX
R106 XX
C117 C118
T4 T7 U8 W8 W9 Y8 AA5 AB4 AC3 AD1 AD2 AE8 AE9 AF8 AG9 AG11 AH8 AH10 AJ7 AJ9 AK8 AL7 AM6 AN5
VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18
D0DQ5 D0DQ6 D0DQ7 D0DQ8 D0DQ9 D0DQ10 D0DQ11 D0DQ12 D0DQ13 D0DQ14 D0DQ15
IC104
DDR2 SDRAM IC104 K4T1G164QE-HCE7T IC103 XX IC107 XX
IC105
DDR2 SDRAM IC105 K4T1G164QE-HCE7T
C106 0.001 C107 0.001 C108 XX C109 0.001
D0DM0 D0DQS0 D0DQS0B
Y4 AB1 AB2
JL1081 JL1038 JL1039
D0DM0 D0DQS0 D0DQSB0
D0MA2 D0MA3 D0MA4 D0MA5
C110 0.001 C111 XX C112 0.001 C113 0.001
U4 V1 V2
JL1082 JL1040 JL1041
D0CLK0 D0CLK0B
Y2 Y1
D0CK0 D0CKB0
D0MA10 D0MA11 D0MA12
C114 XX
D0CS0B
AG4
JL1078
D0CS0
T3 JL102 T6 U1 U2 U5 U9 V3 V5 V8 W1 W2
D0DQ16 GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND D0CKE D0RASB D0CASB D0BA0 D0BA1 D0ADD0 D0ADD1 D0ADD2 D0ADD3 D0ADD4 D0ADD5 D0ADD6 D0ADD7 D0ADD8 D0ADD9 D0ADD10 D0ADD11 D0ADD12 D0ADD13 D0ADD14 D0ADD15 D0CS1B D0CLK1 D0CLK1B D0CKERSTB D0DM3 D0DQS3 D0DQS3B D0DM2 D0DQS2 D0DQS2B D0DQ17 D0DQ18 D0DQ19 D0DQ20 D0DQ21 D0DQ22 D0DQ23 D0DQ24 D0DQ25 D0DQ26 D0DQ27 D0DQ28 D0DQ29 D0DQ30 D0DQ31
AJ4 AK6 AJ3 AJ6 AH6 AH4 AG6 AH5 AL4 AM5 AL3 AN3 AK5 AL6 AJ5 AL5
D0DQ16 D0DQ17 D0DQ18 D0DQ19 D0DQ20 D0DQ21 D0DQ22 D0DQ23 D0DQ24 D0DQ25 D0DQ26 D0DQ27 D0DQ28 D0DQ29 D0DQ30 D0DQ31 D0MCS0 D0MCK0
D0MBA2
JL103 JL104 JL105 JL106
JL133 JL134 JL135
B3 B7 A8
B3 B7 A8
B3 B7 A8 UDM UDQS /UDQS
NC A2 NC E2
A2 E2 R3 R7 R8
A2 E2 R3 R7 R8
JL190 JL191 JL192
B3 B7 A8
B3 B7 A8
NC A2 NC E2
A2 E2 R3 R7 R8
A2 E2 R3 R7 R8
NC R3 NC R7 NC R8
NC R3 NC R7 NC R8
D0DM0 D0DQS0 D0DQSB0 R121 100
JL136 JL137 JL138
F3 F7 E8
F3 F7 E8
F3 F7 E8 LDM LDQS /LDQS
JL193 JL194 JL195
F3 F7 E8
F3 F7 E8
JL139 JL140 JL141
J8 K8 K2
J8 K8 K2
J8 K8 K2 CK /CK CKE
D0MCK1 D0MCKB1 D0MCKE
JL196 JL197 JL198
J8 K8 K2
J8 K8 K2
J8 K8 K2 CK /CK CKE
W4 Y3 Y5 AA1 AA2 AA8 AA9 AB3
D0MCKB0 D0MCKE
JL142 JL143 JL144 JL145
L8 K7 L7 K3
L8 K7 L7 K3
L8 K7 L7 K3 /CS /RAS /CAS /WE VREF J2 J2 J2 C119 1 C136 0.1 JL163 R123 1k 0.5% R124 1k 0.5%
D0MCS0 D0MRAS D0MCAS D0MWE
JL199 JL1001 JL1002 JL1003
L8 K7 L7 K3
L8 K7 L7 K3
L8 K7 L7 K3 /CS /RAS /CAS /WE VREF J2 J2 J2 C137 1 C154 0.1 JL1021 R127 1k 0.5%
D0MRAS AK4 AH1 AH2 JL1058 JL1059 D0DM2 D0DQS2 D0DQSB2 D0ODT0 AM4 AM1 AM2 JL1060 JL1061 D0DM3 D0DQS3 D0DQSB3 D0RAS D0CAS D0CS0 R108 150 R109 150 RB102 39 RB101 39 D0MCAS D0MWE
VDDL
J1 J7
J1 J7
J1 J7 R122 XX
VDDL
J1 J7
J1 J7
J1 J7 R126 XX
AB8 AC1 AC2 AC4 AC8 AC9 AD8 AE7
D0MODT0 D0MRAS D0MCAS D0MCS0
D0MODT0
JL146
K9
K9
K9
VSSDL ODT
D0MODT0
JL1004
K9
K9
K9
VSSDL ODT
R128 1k 0.5%
A3 D0MA4 JL107 JL108 D0MA5 JL109 JL110 D0MA10 D0MA3 D0MA7 D0MA9 JL111 JL112 JL113 JL114 JL115 D0MA15 JL116 A7 B2 B8 D2 D8 E7 D0MA14 F2 F8 D0MBA0 D0MBA2 D0MCKE D0MWE H2 H8 E3 J3 N1 P9
A3 E3 J3 N1 P9
A3 E3 J3 N1 P9 VSS VSS VSS VSS VSS
VDD VDD VDD
A1 E1 J9
A1 E1 J9 M9 R1
A1 E1 J9 M9 R1
C120 C121 C122 C123 C124
0.001 XX 0.001 XX XX JL164 JL165 JL166 JL167 JL168
A3 E3 J3 N1 P9
A3 E3 J3 N1 P9
VDD VDD VDD
A1 E1 J9
A1 E1 J9 M9 R1
A1 E1 J9 M9 R1
C138 C139 C140 C141 C142
XX 0.001 XX 0.001 XX C155 0.01 C156 XX C157 0.01 C158 0.01 C159 0.01 C160 XX C171 XX
D0A4 AK2 AK1 AB6 R107 XX D0BA2 D0A10 D0A3 D0A7 D0A9 AE6 AD4 AG3 AE3 AD6 AE4 AD5 AC5 AF2 AE2 AB7 AE5 AC7 AF1 AC6 AG7 JL1066 D0A14 D0A15 D0CKB1 AE1 AD3 JL1072 JL1068 D0BA0 D0BA1 D0A12 D0A8 D0A6 AB5 AG5 AD7 AA7 JL1063 JL1079 JL1071 JL1062 D0CKE D0RAS D0CAS D0WE D0A0 D0A2 D0A1 AF7 AF5 JL1077 D0ODT0 D0BA1 D0A11 D0CK1 JL1067 JL1064 JL1075 JL1069 JL1080 JL1073 JL1070 JL1074 JL1065 D0A0 D0A1 D0A2 D0A3 D0A4 D0A5 D0A6 D0A7 D0A8 D0A9 D0A10 D0A11 D0A12 D0CKB0 D0CK0 D0BA0 D0BA2 D0CKE D0WE D0A14 D0A15 D0CK1 D0CKB1 D0A5
VDD M9 VDD R1
VDD M9 VDD R1
AF3 AF6 AG1 AG2 AG8 AG10 AG12 AH3
AF4
JL1076
A7 B2 B8 D2 D8 E7 F2 F8 H2 H8
A7 B2 B8 D2 D8 E7 F2 F8 H2 H8
R110 150 R111 150 RB103 39
AH7 AH9 AH11 AJ1 AJ2 AJ8 AJ10 AK3
VDDQ VSSQ VDDQ VSSQ VDDQ VSSQ VDDQ VSSQ VDDQ VSSQ VDDQ VSSQ VDDQ VSSQ VDDQ VSSQ VDDQ VSSQ VDDQ VSSQ
A9 C1 C3 C7 C9 E9 G1 G3 G7 G9
A9 C1 C3 C7 C9 E9 G1 G3 G7 G9
A9 C1 C3 C7 C9 E9 G1 G3 G7 G9
C125 C126 C127 C128 C129 C130 C131 C132 C133 C134
0.001 XX XX 0.001 XX 0.001 XX 0.001 0.001 0.001
JL169 JL170 JL171 JL172 JL173
A7 B2 B8 D2 D8 E7 F2 F8 H2 H8
A7 B2 B8 D2 D8 E7 F2 F8 H2 H8
A7 B2 B8 D2 D8 E7 F2 F8 H2 H8
A9 C1 C3 C7 C9 E9 G1 G3 G7 G9
A9 C1 C3 C7 C9 E9 G1 G3 G7 G9
A9 C1 C3 C7 C9 E9 G1 G3 G7 G9
C143 C144 C145 C146 C147 C148 C149 C150 C151 C152
XX 0.001 0.001 0.001 0.001 XX 0.001 XX XX 0.001
R115 10 R116 10 R117 10 R118 10 RB104 39
C135 10
C153 10
D0MCK0
C161 0.01 C162 XX C163 1 C164 XX C165 1 C166 1 C167 XX C168 1 C169 XX C170 0.01 C172 XX
AK7 AK9 AL1 AL2 AL8 AM3 AM7 AN2
D0MCKB0
D0MCK1
D0MCKB1
AN4 AN6 AP3 AP5
RB105 39
D0MA0 D0MA2 D0MA1 D0MBA1
FB101 R101 XX
R103 1k 0.5%
D0WEB
D0ODT0 FL101 XX EMI JL101 AB9 D0ODT1 D0VREF
M
MB-127 (3/14)
DLL/HDVDD_1.05V C101 XX DDR2_1.8V 05 GND
C174 0.1
R104 1k 0.5%
C102 0.1
C173 XX
PT001 XX E
4-8
BDP-S560
4-9.
MB-127 BOARD (EMMA3P DDR2-B) SCHEMATIC DIAGRAM (2/14) See page 5-7 for printed wiring board.
1 2 3 4 5 IC101
R205 XX IC101 MC-10121F1-207-TA1-A
- Ref. No.: MB-127 board; 10,000 series 6 (2/15) 7 8 9 10 11 12 13 14 15 16 17 18
MB-127 BOARD (2/14)

A MC10121F1 DDR2-B
XX MARK:NO MOUNT
C203 C204
0.1 0.1 0.1 0.1 C207 0.001 C208 0.001 C209 XX
AG13 AG15 AG19 AG21
D1VDD10 D1VDD10 D1VDD10 D1VDD10
D1DQ0 D1DQ1 D1DQ2 D1DQ3 D1DQ4
AL21 AL20 AM22 AM21 AN21 AR20 AN20 AR19 AM24 AL25 AL23 AL24 AN24 AM25 AL22 AN26
D1DQ0 D1DQ1 D1DQ2 D1DQ3 D1DQ4 D1DQ5 D1DQ6 D1DQ7 D1DQ8 D1DQ9 D1DQ10 D1DQ11 D1DQ12 D1DQ13 D1DQ14 D1DQ15 D1MA0 D1MA1 D1MA2 JL217 JL218 JL219 JL220 JL221 JL222 JL223 JL224 JL225 JL226 JL227 JL228 JL229 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 DQ0 G8 DQ1 G2 DQ2 H7 DQ3 H3 DQ4 H1 DQ5 H9 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 G8 G2 H7 H3 H1 H9 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 G8 G2 H7 H3 H1 H9 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 JL247 JL248 JL249 JL250 JL251 JL252 JL253 JL254 JL255 JL256 JL257 JL258 JL259 JL260 JL261 JL262 D1DQ0 D1DQ1 D1DQ2 D1DQ3 D1DQ4 D1DQ5 D1DQ6 D1DQ7 D1DQ8 D1DQ9 D1DQ10 D1DQ11 D1DQ12 D1DQ13 D1DQ14 D1DQ15 D1MBA0 D1MBA1 D1MBA2 JL287 JL288 JL289 L2 L3 L1 L2 L3 L1 L2 L3 L1 BA0 BA1 BA2 D1MA0 D1MA1 D1MA2 D1MA3 D1MA14 D1MA15 D1MA6 D1MA7 D1MA8 D1MA9 D1MA10 D1MA11 D1MA12 JL274 JL275 JL276 JL277 JL278 JL279 JL280 JL281 JL282 JL283 JL284 JL285 JL286 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 DQ0 G8 DQ1 G2 DQ2 H7 DQ3 H3 DQ4 H1 DQ5 H9 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 G8 G2 H7 H3 H1 H9 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 G8 G2 H7 H3 H1 H9 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 JL2005 JL2006 JL2007 JL2008 JL2009 JL2010 JL2011 JL2012 JL2013 JL2014 JL2015 JL2016 JL2017 JL2018 JL2019 JL2020 D1DQ16 D1DQ17 D1DQ18 D1DQ19 D1DQ20 D1DQ21 D1DQ22 D1DQ23 D1DQ24 D1DQ25 D1DQ26 D1DQ27 D1DQ28 D1DQ29 D1DQ30 D1DQ31 IC202 XX IC206 XX
R206 XX
C205 C206
AG14 AG20 AH12 AH13 AH14 AH19 AH20 AJ11 AJ13 AJ18 AJ21 AJ22 AK13 AK14 AK17 AK20 AK22 AK23 AK24 AM12 AM23 AN11 AN22 AN28 AP10 AP16 AP21 AP29 AR10 AR15 AR21 AR29
VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18 VDD18
D1DQ5 D1DQ6 D1DQ7 D1DQ8 D1DQ9 D1DQ10 D1DQ11 D1DQ12 D1DQ13 D1DQ14 D1DQ15
IC204
DDR2 SDRAM IC204 K4T1G164QE-HCE7T IC203 XX IC207 XX
IC205
DDR2 SDRAM IC205 K4T1G164QE-HCE7T
C210 XX C211 0.001 C212 0.001 C213 0.001
AM20 AR23 AP23 JL2038 JL2039
C214 0.001 C215 0.001 C216 0.001 C217 XX
AM26 AR27 AP27 JL2040 JL2041
D1CLK0 D1CLK0B
AP25 AR25
D1CK0 D1CKB0
D1MA11 D1MA12
C218 XX C219 XX C220 XX C221 XX
D1CS0B
AP13
JL2076
D1CS0
D1MBA0 D1MBA1 D1MBA2
JL230 JL231 JL232
L2 L3 L1
L2 L3 L1
L2 L3 L1 BA0 BA1 BA2
D1DQ16 D1DQ17 D1DQ18 D1DQ19 D1DQ20 D1DQ21 D1DQ22 D1DQ23 D1DQ24
AL12 AN10 AM10 AR11 AL13 AL14 AM11 AM14 AK10 AK11 AL9 AL10 AM8 AN9 AN7 AL11
D1DQ16 D1DQ17 D1DQ18 D1DQ19 D1DQ20 D1DQ21 D1DQ22 D1DQ23 D1DQ24 D1DQ25 D1DQ26 D1DQ27 D1DQ28 D1DQ29 D1DQ30 D1DQ31 D1MCS0 D1MRAS D1MCAS JL242 JL243 JL244 JL245 L8 K7 L7 K3 L8 K7 L7 K3 L8 K7 L7 K3 D1MCK0 D1MCKB0 D1MCKE R223 100 JL239 JL240 JL241 J8 K8 K2 J8 K8 K2 J8 K8 K2 D1DM0 D1DQS0 D1DQSB0 JL236 JL237 JL238 F3 F7 E8 F3 F7 E8 F3 F7 E8 D1DM1 D1DQS1 D1DQSB1 JL233 JL234 JL235 B3 B7 A8 B3 B7 A8 B3 B7 A8
UDM UDQS /UDQS
NC A2 NC E2
A2 E2 R3 R7 R8
A2 E2 R3 R7 R8
JL290 JL291 JL292
B3 B7 A8
B3 B7 A8
NC A2 NC E2
A2 E2 R3 R7 R8
A2 E2 R3 R7 R8
C275 XX
NC R3 NC R7 NC R8
NC R3 NC R7 NC R8
JL293 JL294 JL295
F3 F7 E8
F3 F7 E8
LDM LDQS /LDQS
AG16 JL202 JL203 JL204 JL205 JL206 AG18 AG22 AH15 AH16 AH17 AH18 AH21 AH22 AJ12
D1DQ25 GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND D1CKE D1RASB D1CASB D1BA0 D1BA1 D1ADD0 D1ADD1 D1ADD2 D1ADD3 D1ADD4 D1ADD5 D1ADD6 D1ADD7 D1ADD8 D1ADD9 D1ADD10 D1ADD11 D1ADD12 D1ADD13 D1ADD14 D1ADD15 D1CS1B D1CLK1 D1CLK1B D1CKERSTB D1DM3 D1DQS3 D1DQS3B D1DM2 D1DQS2 D1DQS2B D1DQ26 D1DQ27 D1DQ28 D1DQ29 D1DQ30 D1DQ31
D1MCK1 CK /CK CKE D1MCS0 /CS /RAS /CAS /WE VREF J2 J2 J2 C222 1 C239 0.1 JL263 R225 1k 0.5% D1MRAS D1MCAS D1MWE R226 1k 0.5% D1MCKB1 D1MCKE
JL296 JL297 JL298
J8 K8 K2
J8 K8 K2
J8 K8 K2 CK /CK CKE
JL299 JL2001 JL2002 JL2003
L8 K7 L7 K3
L8 K7 L7 K3
L8 K7 L7 K3 /CS /RAS /CAS /WE VREF J2 J2 J2 C240 1 C257 0.1 JL2021 R229 1k 0.5%
AM13 AR8 AP8 JL2058 JL2059
D1DM2 D1DQS2 D1DQSB2 D1ODT0 RB201 39
D1MWE
VDDL
J1 J7
J1 J7
J1 J7 R224 XX
VDDL
J1 J7
J1 J7
J1 J7 R228 XX
D1MODT0 D1MODT0 D1MRAS D1MCAS D1MCS0
JL246
K9
K9
K9
AJ14 AJ17 AJ19 AJ20 AK12 AK15 AK16 AK21
VSSDL ODT
D1MODT0
JL2004
K9
K9
K9
VSSDL ODT
R230 1k 0.5%
AM9 AR4 AP4 JL2060 JL2061
D1RAS D1CAS D1CS0 R210 150 R211 150 RB202 39
A3 JL207 E3 J3 N1 P9
A3 E3 J3 N1 P9
VDD VDD VDD
A1 E1 J9
A1 E1 J9 M9 R1
A1 E1 J9 M9 R1
C223 C224 C225 C226 C227
0.001 XX 0.001 XX 0.001 JL264 JL265 JL266 JL267 JL268
A3 E3 J3 N1 P9
A3 E3 J3 N1 P9
VDD VDD VDD
A1 E1 J9
A1 E1 J9 M9 R1
A1 E1 J9 M9 R1
C241 C242 C243 C244 C245
0.001 XX XX XX 0.001 C258 0.01 C259 XX C260 XX C261 0.01 C262 0.01 C272 XX C276 0.01 C263 0.01 C264 XX C265 1 C266 XX C267 1 C268 1 C269 XX
D1A4 AP6 AR6 AN18 R209 XX D1A10 D1BA2 D1A3 D1A7 D1A9 AN15 AK19 AN14 AP19 AL16 AR17 AL17 AN16 AP17 AK18 AP18 AR14 AM17 AN17 AM16 AN13 JL2070 JL2083 D1A14 D1A15 D1CKB1 AR18 AL19 JL2086 JL2068 D1BA0 D1BA1 D1A12 D1A8 D1A6 AM19 AP12 AP14 AL18 JL2073 JL2074 JL2075 JL2069 D1CKE D1RAS D1CAS D1WE D1A0 D1A2 D1A1 AR12 AR13 JL2084 D1ODT0 D1BA1 D1A11 D1CK1 JL2072 JL2081 JL2065 JL2080 JL2079 JL2066 JL2085 JL2067 JL2082 JL2077 JL2064 JL2078 D1A0 D1A1 D1A2 D1A3 D1A4 D1A5 D1A6 D1A7 D1A8 D1A9 D1A10 D1A11 D1A12 D1CKB0 D1CK0 D1BA0 D1BA2 D1CKE D1WE D1A14 D1A15 D1CK1 D1CKB1 D1A5
D1MA4
JL208 JL209
VDD M9 VDD R1
VDD M9 VDD R1
D1MA5
JL210 JL211
AK25 AL15 AL26 AM18 AM27 AN8 AN12 AN19
AM15
JL2071
JL212 JL213 JL214 JL215 JL216
A7 B2 B8 D2 D8 E7 F2
A7 B2 B8 D2 D8 E7 F2 F8 H2 H8
A7 B2 B8 D2 D8 E7 F2 F8 H2 H8
R212 150 R213 150 RB203 39
D1MA15
AN23 AN25 AN27 AP7 AP9 AP11 AP15 AP20
D1MA14
F8 H2
D1MBA0 D1MBA2 D1MCKE D1MWE
H8
A9 C1 C3 C7 C9 E9 G1 G3 G7 G9
A9 C1 C3 C7 C9 E9 G1 G3 G7 G9
A9 C1 C3 C7 C9 E9 G1 G3 G7 G9
C228 C229 C230 C231 C232 C233 C234 C235 C236 C237
XX XX XX 0.001 0.001 XX 0.001 0.001 XX 0.001
JL269 JL270 JL271 JL272 JL273
A7 B2 B8 D2 D8 E7 F2 F8 H2 H8
A7 B2 B8 D2 D8 E7 F2 F8 H2 H8
A7 B2 B8 D2 D8 E7 F2 F8 H2 H8
A9 C1 C3 C7 C9 E9 G1 G3 G7 G9
A9 C1 C3 C7 C9 E9 G1 G3 G7 G9
A9 C1 C3 C7 C9 E9 G1 G3 G7 G9
C246 C247 C248 C249 C250 C251 C252 C253 C254 C255
0.001 0.001 0.001 0.001 XX 0.001 XX XX XX 0.001
C238 10
C256 10
R217 10 R218 10 R219 10 R220 10 RB204 39
D1MCK0
AP22 AP24 AP26 AP28 AR5 AR7 AR9 AR16
D1MCKB0
D1MCK1
D1MCKB1
L
R203 1k 0.5% JL2063 FB201 R201 XX JL201 R207 150 0.5% JL2062 R208 150 0.5%
AR22 AR24 AR26 AR28
RB205 39
D1MA0 D1MA2 D1MA1 D1MBA1 C271 XX C277 0.01 C273 XX C270 1
AJ16 AJ15
D1WEB D1RQ0 D1RQ1 D1ODT0 D1ODT1 D1VREF
M
MB-127 (3/14)
FL201 XX EMI
AG17
DLL/HDVDD_1.05V C201 XX DDR2_1.8V 05 GND
C278 0.1
R204 1k 0.5%
C202 0.1
C274 XX
4-9
BDP-S560
4-10. MB-127 BOARD (POWER1) SCHEMATIC DIAGRAM (3/14) See page 5-7 for printed wiring board.
- Ref. No.: MB-127 board; 10,000 series 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
MB-127 BOARD (3/14)

A POWER1
FB301 FL309 XX EMI 5.7 5.7 5.7 MB-127 (8/14) C350 10 C351 XX 5.7 5 6 7 8 Q301 RRH070N03TB1 SWITCHING D4 D3 D2 D1 S1 S2 S3 G 1.9 1.1 1.1 1.1
L304 2.2uH
B
SW5VD 5.7 5
4 3 2 1
5 VIN
4 VOUT
IC304
SW+5V REGULATOR IC304 TK11150CSCL-G R312 47k 680p C396 C334 XX 4.2 1.1 1 0.5% 1 2 3 4 5 6 7 R316 1.5k 0.5% R318 8.2k 0.5% C339 1 IC309 TPS51117PWRG4
R314 1k
GND
CE
NP
R322 150k
R308 XX
R324 10
R328 XX
C357 0.1
R372 100k
C397 2200p FL303 EMI FL308 EMI FL307 G G CORE_1.05V MB-127 (4/14) (7/14)
1 3.3
3 1.3
R310 XX 1.1 1.1 1.1 1.1 5.3 1.9 1.1 0 5 3.8 R323 6.8k Q302 RSS100N03TB SWITCHING S1 S2 S3 G 1 R327 XX C355 4.7 2 3 4 3.8 S1 S2 S3 G 1 2 3 4
L301 1uH
R301 1k C311 XX C313 0.22 C308 XX C315 0.01 C316 0.22 C319 XX
EN_PSV TON VOUT V5FILT VFB
VBST 14 DRVH LL TRIP 13 12 11 10 9 8
8 7 6 5 D4 D3 D2 D1 Q300 XX
8 7 6 5 D4 D3 D2 D1
EMI G
5 0.6 JL301
R315
Q307 RT3N11M-TP-1 REGULATOR CONTROL 3.2 R357 1k C310 XX R380 XX
3.9k
V5DRV DRVL PGND
4.2 680 0
PGOOD GND
22
22
FB303 FL311 XX MC-10121F1_SW3.3V EMI R367 XX C303 0.1 1 2 3 C312 XX C314 XX C307 XX IC303 XX VDD GND CE NC 4 C347 XX VOUT 5 XX XX XX R379 XX R381 XX R377 XX
C343 0.1
IC309
MULTI REGULATOR
D301 M1FM3
C361 330 4V
MB-127 (4/14) (5/14) (6/14) (9/14) (10/14) (11/14)
C317
R378
C320
FB302 FL310 XX EMI 12.3 12.3 12.3 C322 10 C323 XX 12.3 5 6 7 8
Q303 RRH070N03TB1 SWITCHING D4 D3 D2 D1 S1 S2 S3 G 2.4 1.8 1.8 1.8
R320 330
4 3 2 1
F
3.3 R309 1k C305 10
IC307
DLL+1.05V REGULATOR IC307 MM3141UNRE 1 2 3 VDD GND CE NC 4 C348 XX C301 10 R321 47k R368 XX VOUT 5 1 DLL/HDVDD_1.05V MB-127 (1/14) (2/14) (7/14)
C399 2200p R319 150k 0.5% IC310 TPS51117PWRG4 5 1.8 1 2 3 4 5 6 7 R325 1k 0.5% R334 10k 0.5% C352 1 VBST 14 DRVH LL TRIP V5DRV DRVL PGND 13 12 11 10 9 8 R335 XX C344 4.7 6.1 2.4 1.8 0 5 4 R349 3.3k 0.5% Q304 RSS100N03TB SWITCHING S1 S2 S3 G 1 2 3 4 XX 4 22 R329 XX R373 100k
R341 XX FL304 EMI DDR2_1.8V MB-127 (1/14) (2/14)
680p
3.2 C309 XX
R332 XX R326 XX 1.8 1.8 1.8 1.8
C358 0.1
C398
MB-127 (14/14)
PCONT2 PCONT4
R365 1k
C342 XX
R330 XX
L302 2.2uH R342 XX FL305 EMI
EN_PSV TON VOUT V5FILT VFB
IC308
R302 XX PLL+1.05V REGULATOR IC308 MM3141UNRE 3.3 R303 1k C306 10 GND 1 2 3 VDD GND CE NC 4 C353 XX C302 10 VOUT 5 1 PLL_1.05V MB-127 (4/14) R352 1k C318 XX C349 0.1 Q308 RT3N11M-TP-1 REGULATOR CONTROL 3.2 0 5 680 0
1.8 0.5% 5 0.6 JL302
8 7 6 5 D4 D3 D2 D1
R317
15k
PGOOD GND
C364
3.2 C377 XX
R374
IC310
MULTI REGULATOR R345 330
C366
D302 XX
C362 330 4V D304 KDZTR3.9B
C374 XX
D303 KDZTR3.9B
C345
R371
C346
C304 XX
C375 XX
C321 XX
UNSW12V
DR_SW12V DR_GND DR_GND DR_SW5V ATA-PCONT GND UNSW6V SWITCHING REGULATOR
5.7
EN
NC
UNSW12V UNSW12V GND P-ON
VSS
IC302 S-1170B50UC-OUJTFG
ON/OFF
VOUT
VIN
IC301
UNSW+3.3V REGULATOR IC301 NJM2878F3-33(TE2) R305 1k
FB
5 0.8 0.9
6 3.3
7 3.5
SS
GND
DCSW5V REGULATOR
COMP
PS303 3.15A 32V
3.3
GND
Vout
Vin
UNSW6V
IC302
SW+3.3V REGULATOR IC311 MP1415DSE-LF-Z
BOOT
GND
SW
VIN
UNSW6V
NC
CE
KEY0
GND
CN301 15P JL303 15 JL304 14 JL305 13 JL306 12 JL307 11 JL317 10 JL308 9 JL309 8 JL316 7 JL310 6 JL311 5 JL312 4 JL313 3 JL315 2 JL314 1
C395 0.1
PS304 2A 50V DR_SW12V C392 0.1 DR_SW5V UNSW3.3V 5.7 R306 XX MB-127 (12/14) UNSW6V MB-127 (6/14) (7/14) (14/14) MB-127 (14/14) 4 C337 0.01 12.3 3.3 8.2
MB-127 (14/14) MB-127 (8/14) MB-127 (7/14)
DCSW5V
DCSW3.3V L303 10uH R333 XX C340 XX R339 27k 0.5% D308 MAZ8047G0LS0 3.3 S 3.3 Q306 RTR020P02TR B+ SWITCH SW3.3V
MB-127 (6/14) (11/14) (14/14)
PS301 3.15A 32V
IC311
C379 1
R369 10k
0.1
8 R338 1k R370 1k PCONT1 3.3 0.1 3.3 Q309 RT1N141M-TP-1 B+ SWITCH R376 XX R356 330 R363 330 R364 330 PCONT3
ATA_PCONT
1 3.2 MB-127 (14/14)
1 5.7
3 R331 10k 0.5% C330 XX C331 1 C335 XX C336 10 C341 XX C369 4700p C338 0.022 D307 M1FM3 C376 22 C378 XX R353 330 0.5% R355 10k 0.5% R375 XX
MB-127 (14/14)
K
HU-012 BOARD CN102 (SEE PAGE 4-7)
CN302 4P UNSW6V UNSW6V GND GND 05 4 3 2 1 C329 4.7 C327 XX C325 XX R304 1k C324 XX C332 4.7 C333 XX R307 XX R311 XX
0.1 Q305 RT1N141M-TP-1 SWITCH
R313 XX
C326 XX
C328 1
4-10
BDP-S560
4-11. MB-127 BOARD (CLK/POWER2) SCHEMATIC DIAGRAM (4/14) See page 5-7 for printed wiring board.
- Ref. No.: MB-127 board; 10,000 series -
8 IC101
IC101 MC-10121F1-207-TA1-A
9 (4/15)
10
11
12 IC101
IC101 MC-10121F1-207-TA1-A
13 (5/15)
MB-127 BOARD (4/14)

A CLK/POWER2
XX MARK:NO MOUNT
A25 A27 A29
GND GND GND GND GND GND VDD3 VDD3 VDD3
N19 R5 N21 P19 C27 P21 R18 E34 R19 R20 G32 J32 K31 L28 M27 T35 U32 Y27 Y28 Y29 AB31 AD27 AD28 AE34 AG31 AG23 AH23 AJ25 AJ35 AL27 AL31 AN29 AN33 C29 C31 G25 J19 J22 C414 0.1 C415 0.1 C416 0.1 C417 0.1 C418 0.1 C419 0.1 C420 0.1 C421 0.1 C422 0.1 C440 10 R21 R22 R23 T18 T19 T20 T21 U17 U18 U19 U20 U21 U22 U23 V13 V14 V15 V16 V17 V18 V19 V20 V21 W15 W16 W17 W18 W19 W20 MC-10121F1_SW3.3V MB-127 (3/14) VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 VDD10 K27 K28 N16 N18 N20 N22 N23 P16 P18 P20 P22 P23 T13 T14 T22 T23 V28 V29 Y22 Y23 AB13 AB14 AB20 AB22 AB23 AB30 AC13 AC14 AC20 AC22 AC23 AF27 AF28 AG25 AH25 C441 10 C423 0.1 C424 XX C425 0.1 C426 XX C427 0.1 C428 0.1 C429 0.1 C430 0.1 C431 0.1 C432 0.1 C433 0.1 C434 0.1 C435 0.1 C436 0.1 C437 0.1 C438 XX CORE_1.05V W21 W22 W23 Y15 Y16 Y17 Y18 Y19 Y20 Y21 AA13 AA14 AA15 AA16 AA17 AA18 AA19 AA20 AA21 AA22 AA23 AB15 AC15 AB18 AB19 AC18 AC19 AB21 AC21
GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND
A31 D19 D26
E25 E32 E33 E35
GND GND GND GND GND GND
VDD3 VDD3 VDD3 VDD3 VDD3 VDD3 VDD3
F32 F34
G33 G35
GND GND
VDD3 VDD3 VDD3
H32 H34
GND GND
VDD3 VDD3 VDD3
IC101
(3/15)
J29 J31 J33 K29 K30 R401 XX L27 L29 R407 22 CLK27MOUT M31 MB-127 (6/14) P1 T27 T28 R402 XX U34 U35 V33 W27
GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND
VDD3 VDD3 VDD3 VDD3 VDD3 VDD3 VDD3 VDD3 VDD3 VDD3 VDD3 VDD3 VDD3 VDD3 VDD3
MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL, A/V OUT, HDMI, ETHERNET I/F, USB I/F IC101 MC-10121F1-207-TA1-A
CLK27IN CLK27OUT
N1 M1
JL402 JL403
XI
R1 T1 JL401 R404 XX R405 330 R403 XX R409 220 C402 0.1 2 C411 7p C413 7p X401 27MHz 1
XO
W28 W29 W32 AA27 AA28 AA29 AA30 AA31 AD33
CLKSEL
T2
PLS0VDD PLS0GND
Y13 Y14
PLSYVDD PLSYGND
W13 W14
C403 0.1
AE27 AE28 AF34
PLAUVDD PLAUGND
J20 J21
C404 0.1
AG35 AH32 AK30
PLA2VDD PLA2GND
H20 H21
C405 0.1
AL35 AM32 AG26
PLV2VDD PLV2GND
AB29 AB28
C406 0.1
AG27 AH28 AL28
PLMVVDD
AC29 AC28
C407 0.1
AG24 AH24 AJ23
PLMVGND
PLSVVDD PLSVGND
AB27 AC27
C408 0.1
AJ24 C28 D29
PLUMVDD PLUMGND
AC17 AB17
C409 0.1
D31 F28 J23
PLURVDD PLURGND
AC16 AB16
C410 0.1
VRVDD VRGND
J26 J27
C442 0.1
VDD10 VDD10 VDD10 VDD10
FB401 FL401 XX MB-127 (3/14) PLL_1.05V C401 XX GND EMI C443 0.1 R408 XX
VDD10 VDD10
K
05
4-11
BDP-S560
4-12. MB-127 BOARD (FLASH/HOST) SCHEMATIC DIAGRAM (5/14) See page 5-7 for printed wiring board.
- Ref. No.: MB-127 board; 10,000 series 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
MB-127 BOARD (5/14)

A FLASH/HOST
IC101 B
IC101 MC-10121F1-207-TA1-A
(6/15)
RADD0 RADD1 RADD2
AN34 AM35 AM34 AM33 AL34 AL33 AL32 AL30 AL29 AK35 AK34 AK33 AK32 AK31 AK29 AJ34 AJ33 AJ32 AJ31 AJ30 AJ29 AH35 AH34 AH33 AH31 AH30 JL585 JL584 JL583 JL582 JL581 JL580 JL579 JL578 JL577 JL588 JL587 JL586 JL591 JL590 JL589 JL595
EMI-AD0 EMI-AD1 EMI-AD2 EMI-AD3 EMI-AD4 EMI-AD5 EMI-AD6 EMI-AD7 EMI-AD8 EMI-AD9 EMI-AD10 EMI-AD11 EMI-AD12 EMI-AD13 EMI-AD14 EMI-AD15 EMI-AD16 EMI-AD17 EMI-AD18 EMI-AD19 EMI-AD20 EMI-AD21 EMI-AD22 EMI-AD23 EMI-AD24 EMI-AD25
EMI-AD18 EMI-AD8 EMI-AD7 EMI-AD6 EMI-AD9 EMI-AD10 EMI-AD11 EMI-AD12 EMI-AD22 EMI-AD20 EMI-AD21 EMI-AD23 EMI-AD13 EMI-AD14 EMI-AD15 EMI-AD16 EMI-AD2 EMI-AD3 EMI-AD4 EMI-AD5 EMI-AD24 EMI-AD25 EMI-AD1 EMI-AD17 EMI-AD19 EMI-AD0
RB502 22
JL516 JL503 JL509
EMI_AD18 EMI_AD8 EMI_AD7 EMI_AD6 EMI_AD9 EMI_AD10 EMI_AD11 EMI_AD12 EMI_AD22 EMI_AD20 EMI_AD21 EMI_AD23 EMI_AD13 EMI_AD14 EMI_AD15 EMI_AD16 EMI_AD2 EMI_AD3 EMI_AD4 EMI_AD5 EMI_AD24 EMI_AD25 EMI_AD1 EMI_AD17 EMI_AD19 EMI_AD0 MB-127 (9/14) NAND_WP EMI_AD19 EMI_AD18 EMI_AD8 EMI_AD7 RB511 22 EMI_AD6 JL527 JL528 JL529 RB512 22 JL530 JL531 JL532 JL533 RB513 22 JL534 JL535 JL536 JL537 RB514 22 JL538 JL539 JL540 JL542 JL541 RB501 XX EMI_DT3 EMI_DT1 EMI_DT0 EMI_DT2 EMI_DT4 EMI_DT5 EMI_DT6 EMI_DT7 EMI_DT8 EMI_DT9 EMI_DT10 EMI_DT11 EMI_DT12 EMI_DT15 EMI_DT14 EMI_DT13 RB518 XX EMI_AD5 EMI_AD4 EMI_AD3 EMI_AD2 R516 XX MC-10121F1_XRST R523 100 C517 0.01 R518 XX EMI_XWE 3.3 3.3 EMI_AD16 EMI_AD15 EMI_AD14 EMI_AD13 EMI_AD12 EMI_AD11 EMI_AD10 EMI_AD9 0 0 0 0 0 0 0 0
MB-127 (9/14) MB-127 (6/14)
GLB_XRST
RADD3 RADD4 RADD5 RADD6 RADD7 RADD8 RADD9 RADD10
RB503 22
JL505 JL506 JL514 JL510
PCIP_CLK_BAG EMI_AD17
IC501
4M NOR FLASH ROM IC501 MX29LV400CTTI-70G-P4G01 1 2 3 4 5 6 7 8 9 A15 A14 A13 A12 A11 A10 A9 A8 N.C 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 3.3 R520 XX RB515 XX RB516 XX
RB504 XX
JL507 JL522 JL520 JL521
A16 BYTE VSS DQ15/A-1 DQ7 DQ14 DQ6 DQ13 DQ5 DQ12 DQ4 VCC DQ11 DQ3 DQ10 DQ2 DQ9 DQ1 DQ8 DQ0 OE VSS CE A0
RADD11 RADD12 RADD13 RADD14 RADD15 RADD16 RADD17 RADD18
RB505 22
JL524 JL519 JL511 JL515
3.3 C513 0.1
EMI_DT15 EMI_DT7 EMI_DT14 EMI_DT6 EMI_DT13 EMI_DT5 EMI_DT12 EMI_DT4 EMI_XWE EMI_XGCS0 EMI_XGCS1 EMI_XFCS2 EMI_XFCS3 EMI_XRDY EMI_XGRDY
CN501 XX B35 B34 B33 B32 B31 B30 B29 B28 B27 B26 B25 EMI_AD0 EMI_AD22 EMI_AD20 EMI_AD21 B24 B23 B22 B21 B20 B19 B18 B17 B16 B15 B14 B13 B12 B11 EMI_DT11 EMI_DT3 EMI_DT10 EMI_DT2 EMI_DT9 EMI_DT1 B10 B9 B8 B7 B6 B5 B4 B3 B2 GND 3.3V SYSCLK EMI_XWE EMI_XGCS0 EMI_XGCS1 EMI_XFCS2 EMI_XFCS3 EMI_NRB EMI_XGRDY GND EMI_AD0 EMI_AD22 EMI_AD20 EMI_AD21 EMI_AD23 EMI_AD24 EMI_AD25 EMI_AD1 EMI_AD17 EMI_AD2 EMI_AD3 EMI_AD4 EMI_AD5 GND EMI_DT11 EMI_DT3 EMI_DT10 EMI_DT2 EMI_DT9 EMI_DT1 EMI_DT8 EMI_DT0 3.3V GND
(NC)
GND 3.3V GLB_XRST EMI_XFCS0 EMI_XOE EMI_XFCS1 EMI_NCLE EMI_XNFOE EMI_NALE EMI_XNWE GND EMI_AD6 EMI_AD7 EMI_AD8 EMI_AD18 EMI_AD19 EMI_AD9 EMI_AD10 EMI_AD11 EMI_AD12 EMI_AD16 EMI_AD15 EMI_AD14 EMI_AD13 GND EMI_DT4 EMI_DT12 EMI_DT5 EMI_DT13 EMI_DT6 EMI_DT14 EMI_DT7 EMI_DT15 3.3V GND
A35 A34 A33 A32 A31 A30 A29 A28 A27 A26 A25 A24 A23 A22 A21 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 EMI_DT4 EMI_DT12 EMI_DT5 EMI_DT13 EMI_DT6 EMI_DT14 EMI_DT7 EMI_DT15 EMI_AD6 EMI_AD7 EMI_AD8 EMI_AD18 EMI_AD19 EMI_AD9 EMI_AD10 EMI_AD11 EMI_AD12 EMI_AD16 EMI_AD15 EMI_AD14 EMI_AD13 EMI_XFCS0 EMI_XOE EMI_XFCS1 EMI_NCLE EMI_XNOE EMI_NALE EMI_XNWE
RB506 22
JL512 JL501 JL504 JL508
10 N.C 11 WE 12 RESET 13 N.C 14 N.C 15 RY/BY 16 N.C 0 0 0 0 0 0 0 0 17 A17 18 A7 19 A6 20 A5 21 A4 22 A3 23 A2 24 A1
RADD19 RADD20 RADD21 RADD22 RADD23 RADD24 RADD25
RB507 22
JL502 JL525 JL526 JL513
EMI_DT11 EMI_DT3
RB517 XX
EMI_DT10 EMI_DT2
R503 XX
JL523 JL517 JL518
R504 XX
EMI_AD23 EMI_DT9 EMI_DT1 EMI_DT8 EMI_DT0 EMI_AD24 EMI_AD25 EMI_AD1 EMI_AD17 EMI_AD2 EMI_AD3 EMI_AD4 EMI_AD1 EMI_XOE EMI_XFCS0 EMI_AD5
RDATA0 RDATA1 RDATA2 RDATA3 RDATA4 RDATA5 RDATA6
AH29 AG34 AG33 AG32 AG30 AG29 AF33 AF32 AF31 AF30 AF29 AE33 AE32 AE31 AE30 AE29
RDATA7 RDATA8 RDATA9 RDATA10 RDATA11 RDATA12 RDATA13 RDATA14
IC502
2G NAND FLASH ROM IC502 HY27UF082G2B-TPCBDR 1 2 3 NC NC NC NC NC NC RY/BY nRE nCE NC 48 NC 47 NC 46 NC 45 IO8 IO7 IO6 IO5 44 43 42 41 3.3 3.3 3.3 3.3 EMI_DT7 EMI_DT6 EMI_DT5 EMI_DT4
EMI_DT8 EMI_DT0
RDATA15
GCSB0 GCSB1 GRDYB FOEB FWEB
AP32 AP33 AN30 AN31 AN32 AM28 AM29 AM30 AM31 JL597 JL592 JL593 JL594 RB508 22 JL596 R505 XX
JL543 JL544 JL545 JL550 JL551 JL549 JL548 JL546 JL547
EMI_XGCS0 EMI_XGCS1 EMI_XGRDY EMI_XFCS2 EMI_XFCS3 EMI_XFCS1 EMI_XFCS0 EMI_XOE EMI_XWE C511 0.1 EMI_XRDY EMI_XNOE EMI_XFCS1 R517 33
4 R519 3.3k 5 6 7 8 9
B1
NC 40 NC 39 NC 38 VCC 37 VSS 36 3.3 C514 0.1 RB519 XX
FCSB0 FCSB1 FCSB2 FCSB3
10 NC 3.3 11 NC 12 VCC 13 VSS 14 NC
NFOEB NWEB
AR30 AR31 AP30 AR32 AP31
RB509 22
NC 35 NC 34 NC 33 IO4 IO3 IO2 IO1 32 31 30 29 3.3 3.3 3.3 3.3 EMI_DT3 EMI_DT2 EMI_DT1 EMI_DT0
JL552 JL556 JL554 JL555
EMI_XNOE EMI_NCLE EMI_XRDY EMI_NALE EMI_XNWE R515 10k
EMI_NCLE EMI_NALE EMI_XNWE
15 NC 16 CLE 17 ALE 18 WE 19 WP 20 NC 21 NC 22 NC 23 NC 24 NC
NRBB NALE NCLE
R528 XX
JL553
NC 28 NC 27 NC 26 NC 25 RB520 XX
10k
10k
10k
10k
10k
10k
10k
10k
10k
10k
10k
R525
10k
R551
R565
R560
R566
R563
R559
R558
R550
R556
R501
R502
R553
R562
R554
R555
R557
R506
R507
R508
R564
R561
R524
R526
10k
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
RB510 10k
R527 10k
RB522 10k
RB521 XX
MB-127 (3/14)
MC-10121F1_SW3.3V C516 XX GND JL557 JL558 JL559 R509 XX JL560 S501 XX
R512
10k XX 10k XX
M
05
R510 R511 R521
10k XX XX
R513 R514 R522
4-12
BDP-S560
4-13. MB-127 BOARD (USB) SCHEMATIC DIAGRAM (6/14) See page 5-7 for printed wiring board.
10
11
12
MB-127 BOARD (6/14)

A USB
6 GND GND
IC601
+5V REGULATOR IC601 SI-3010KM-TLS Vin Vc 1 3.3 FB601 2 5.8
MB-127 (9/14)
USB_VBUS_PCONT C602 2.2 GND C601 XX
D601 MA2J1110GLS0 R616 2.2k 0.5%
IC101 C
IC101 MC-10121F1-207-TA1-A
(7/15)
15k
15k
15k
15k
MB-127 (3/14)
UNSW6V MC-10121F1_SW3.3V
ADJ 5
Vo
R610
R631
R632
R611
XX
10k
R614 XX
XX
22 10V
R617 39k 0.5% XX
R619 XX
C625
R615
C612
C610
C614
C613
Y32 Y33 C603 0.1
USBVDD33 USBRSDM1 USBVDD33 USBRSDP1 USBDM1
AB35 AA35 AB34 AA34 W35 V35 W34 V34 AC35 W31 W30 Y31 Y30
R601 39 R602 39 L604 18nH
C609 1
R618 10k 0.5%
C617 220 10V
R630 10k
R639 0
R638 0
CN601 5P 1 2 GND DP DM VBUS GND HU-012 BOARD CN103 (SEE PAGE 4-7)
L605 4 2 D602 PGB1010603NR D603 PGB1010603NR
AA33
USBPVSS USBRSDM2
USBDP1
R604 R605
39 39
L603 18nH 3 1
JL601 JL602 C620 XX C621 XX
3 4 5
USBRSDP2 W33 Y34 Y35 USBDGND USBDGND USBDGND USBDM2 USBDP2 USBRREF USBOCI1 USBOCI2
D606 XX
C618 10
JL608 JL611 JL610 JL612 JL613
R606 10k
CN602 5P R607 10k L608 18nH 4 L609 2 D604 PGB1010603NR D605 PGB1010603NR 1 2 GND DP DM VBUS GND USB-016 BOARD CN781 (SEE PAGE 4-22)
E
C604 0.001
USBPPON1 USBPPON2
AE35 USBXO JL606 AA32 USBPVDDFIL USBXI AF35
R603 1.6k 0.5%
R609 820 X601 30MHz R608 XX
C607 8p
L607 18nH 3 1
JL603 JL604 C622 XX C623 XX D607 XX C619 10
3 4 5
AD34 L601 L602 USBCOM
C608 8p
C611 XX
C615 XX
R621 0 SW3.3V MB-127 (3/14)
JL607
AC34
L606 XX USBAVDD
AD35 C605 2.2
USBAVSS E_VBUS_DET R635 100 MC-10121F1_XRST R636 XX R637 0 R626 XX MB-127 (14/14)
X602 XX OE GND VDD OUT R620 XX 1 2 3 4 R624 XX
IC602 XX VCCA A1 A2 GND VCCB B1 B2 DIR 8 7 6 5 R623 XX R625 XX MB-127 (5/14) MB-127 (4/14) R622 XX
C624 0.01 AD31 PCIRSTB AD32 PCICLKI JL609 JL605
C606 0.1
MB-127 (9/14)
PCIP_CLK_BAG R640 XX CLK27MOUT
05
4-13
BDP-S560
4-14. MB-127 BOARD (HDMI/SATA) SCHEMATIC DIAGRAM (7/14) See page 5-7 for printed wiring board.
10
11
12
13
14
15
16
MB-127 BOARD (7/14)

A HDMI/SATA
C749 XX
C706 0.22
C708 0.22
C757 0.22 UNSW6V DCSW3.3V MB-127 (3/14)
5.7
3.3
5.7
5 VOUT
4 NC
VOUT
NOISE
FB706 XX
FL701 XX
EMI
1 3.1
3 1.3
1 3.1
IC101
(9/15)
C732 XX
R721 XX
R727 XX C748 XX R726 XX C751 XX
R722 XX C709 0.01
1.3 C760 0.22
R731 XX
NOISE 3
CONT
CONT
IC702 XX
+3.3V REGULATOR GND GND CE IC704 TK11133CSCL-G
+5V REGULATOR GND IC705 TK11150CSCL-G
VDD
VOUT
VIN
VIN
IC704
IC705
4.9 4
R743 XX HDMI_PCONT
R723 15k
C707 0.1
R732 15k
C758 0.1
C759 0.01
R742 XX PCONT3
HDVSS HDVSS
J35 J34 K34 K35
R714 XX
C741 XX TX2P TX2N Q702 INK0001AC LEVEL SHIFT 3.3 R728 47k 5.7 S 3.3 R702 XX PCONT2
MB-127 (14/14)
HTXP2 MB-127 (3/14) CORE_1.05V HTXN2
0 HTXP1 HTXN1 HDVSS HDVSS L34 L35 K33 L33 M34 M35 R715 XX C742 XX C747 0.01 TX1P TX1N 3.3
G B
3 2 1 0 0
R729 4.7k
R704 XX CEC
IC101
(8/15)
HTXP0 HTXN0
TX0P TX0N
IC703
BUFFER IC703 TC7SH08FU(T5RSOYJF)
HTXCP HTXCN
N34 N35 M33 N33
R716 XX
C743 XX
R730 3.3k TCKP TCKN R705 XX
C701 XX
C703 XX
R747 XX
HDVSS A24 B24 A23 B23 A22 B22 SAVDDDIG SAGNDDIG SAVDDDIG SAGNDDIG SAVDDDIG SARXP0 SAVDDDIG SARXN0 SAGNDDIG SAGNDDIG SATXN0 SATXP0 SAGNDDIG SAGNDDIG SAVDDTIO C23 C22 C21 C20 C19 H19 SAVDDTIO SAGNDDIG SAVDDTIO SAGNDDIG SAVDDTIO SAGNDDIG SAGNDDIG SAGNDDIG SAGNDDIG H18 J18 R706 XX R708 XX JL701 B19 A19 SACREFP SACREFN HDVDD_IO B18 SAVDDANA C711 XX A18 SAGNDANA HDVDD HDVDD HDVDD HDVDD_IO HDVDD_IO SAGNDDIG SAGNDDIG R750 XX D21 E21 F21 G20 C725 XX C722 0.1 HEXTN HEXTP HDVSS HDVSS HDVSS HDVSS HDVSS HDVSS HDVSS HDVSS HDVSS HDVSS HDVSS C731 XX R751 XX HDVSS D20 E20 F20 G19 C713 0.1 C716 XX HDSCL HDSDA HHPD HDVSS
R717 XX R718 XX
VOUT
VIN
C744 XX 5 4
TX2P 4 IC701 XX TX2N TX1P R710 XX C705 XX 1 TX1N TX0P 4 4
L705 3
V27 T31
JL703 JL704 R711 5.6k 0.5% R713 XX R701 XX R719 XX C702 XX
NOISE
CONT
U27
JL702
R720 XX
GND
1 L706
R748 XX
CL701 CL702
A21 B21 A20
B20
P35 P34 R35 R34 P33 L32 P32 N31 P30 R30 T30 R29 T29 U28
JL706 JL705
R746 XX
R712 560 0.5%
2 L707 3 D702 D703 XX XX
CN702 23P 1 2 3 D704 XX XX 4 5 6
HDMI OUT TMDS DATA2 + TMDS DATA2 SHIELD TMDS DATA2 TMDS DATA1 + TMDS DATA1 SHIELD TMDS DATA1 TMDS DATA0 + TMDS DATA0 SHIELD TMDS DATA0 TMDS CLOCK + TMDS CLOCK SHIELD TMDS CLOCK CEC RESERVED SCL SDA DDC/CEC GND +5V POWER HPD PARTS BODY PARTS BODY PARTS BODY PARTS BODY
1 TX0N TCKP 4 L708
D705
D706 3 D707
XX XX
7 8 9
1 TCKN R725 3.3k R733 1.8k 3.3
2 R737 0 FB704 FB701 XX R741 0 R740 XX
D708 D709
XX XX
10 11 12
D710 D711 0 D712 D713 D701
XX XX
13 14 15 16
R707 XX
R709 XX
4.9
N32 R32
C762 0.01 C738 0.01 C739 XX C740 XX
D2
3.3 G1
M32
R745 XX
S1
R734 1.8k Q701 RT3K11M-T111-1 LEVEL SHIFT
FB702
XX FB705 XX
XX XX XX
17 18 19 20 21 22
R739
R738
R33 P31 R31 N30
S2 3.3
G2 3.3
D1 4.9
FB703 XX
HDVDD C712 0.1 HAVDD HAVSS
23
V22 V23
R703 XX
R724 3.3k
R752 XX
K
05 GND
C704 0.01
DLL/HDVDD_1.05V
MB-127 (3/14)
4-14
BDP-S560
4-15. MB-127 BOARD (AUDIO/VIDEO) SCHEMATIC DIAGRAM (8/14) See page 5-7 for printed wiring board.
- Ref. No.: MB-127 board; 10,000 series 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
MB-127 BOARD (8/14)

A AUDIO/VIDEO
VAY VAC VAREFYC F33 H33 M29 L30 K32 G34 H35 F35 C803 0.1 DVDDYC M28 N27 C807 0.1 N28 P27 R830 3.3k 3.3k 4.9 3.3 DCSW5V MB-127 (3/14) MB-127 (14/14) R822 R823 150 150 JL824 JL821 JL825 C805 C806 0.1 XX R821 680 HD_PR HD_Y HD_PB R8026 XX R8025 XX 3.2 R820 150 R819 150 SD_Y SD_C R8024 XX
VARSETYC VACOMPYC VAR VAG VAB
IC808
VIDEO AMP IC808 NJM2564BV(TE2) 1 2 3 4 5 PCONT3 6 S1 V+S SCIN V+1 NC GND1 V-1 SYIN V+2 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 0 C865 0.1 0.2 -5 0 0.2 -5 3.3 0.1 C864 0.1 R809 XX R8041 75 R810 XX R8042 75 R811 XX R8043 75 4.9 0 3.3 0.2 C862 0.1
11
R8035 2.2k R8044 75 R8054 XX
R824 150
L801 XX
1
SD_C
C853 0.1
S2 SDCOUT SCOUT V+4 VOUT GND4 SYOUT V-4 V+3 YOUT GND3 PBOUT V-3 PROUT NC LPFSW
5 0.7 3.3
AVDDYC
10 8 9
R8045 75
R8055 XX
AGNDYC AGNDYC
R829
VARSETRGB VAREFRGB
M30 L31
JL823 JL822
NC
VACOMPRGB
R825 470
GND
CTL
N29
JL830
C802 0.1
C811 XX
VO
IC802
+3.3V REGULATOR IC802 NJM2878F3-33(TE2)
5 VI
4 SD_Y
2 3
HD_Y
-5 0.5 3.3 0.5
R8040 75
R8056 XX
7 8 9
D806 MAZW068HGLS0
D810 MAZW068HGLS0
1 R832 XX 3.3
10 YIN 11 GND2
C812 0.1 DVDDRGB P29 C810 47 16V C814 0.1 AGNDRGB AGNDRGB P28 R28 R827 2.2k 0.5% R828 2.2k 0.5%
4
HD_PB 0.7 R8027 XX
D808 MAZW068HGLS0
12 PBIN 13 V-2 14 PRIN 15 PS2 16 PS1
AVDDRGB
R27
R833 XX
5
HD_PR
-5 0.6 3.3
CN802 XX 8 Y_OUT CB_OUT GND CR_OUT LINE3 GND LINE2 LINE1 (NC)
C819 1
C820 XX
C821 1
3.3 C855 0.1 R869 3.3k R8015 XX
7
JL817 JL816 JL815
7 6 5 4 3 2 1
R8028 XX ASPECT1
R835 R836 R837 R838
XX XX XX XX R871 XX R872 XX R891 XX R894 XX R8012 XX
F
AO1MCK AO1BCK AO1BD AO1LRCK G27 E29 E28 F27 JL828 JL827 JL826 JL829 R805 R806 R807 R808 47 47 47 47 AO1MCK AO1BCK AO1BD AO1LRCK C830 0.001 C844 0.001 R854 XX R855 XX R858 XX R859 XX R860 XX
MB-127 (9/14)
ASPECT0 XVMUTE FORMAT0
C859 47 16V C856 0.1
C867 47 16V
6
D807 MAZW068HGLS0 D809 MAZW068HGLS0 D811 MAZW068HGLS0
R852 XX
R863 XX
R875 XX
R834 XX R8016 XX R880 XX R8023 XX L803 XX L804 XX R8051 XX
AO0BCK AO0BD3 AO0BD0 AO0BD1 AO0BD2 AO0LRCK AO0MCK
G26 D27 D28 E26 F26 E27 D30
JL805 JL806 JL807 JL808 JL809 JL810 JL811
R887 XX
R8017 XX
R8052 XX R8018 XX
3.2 R8053 XX
Q803 XX
Q804 XX
0 Q810 XX Q814 XX Q818 RT1N241C-TP-1 MIX, LINE DRIVE R8039 100
ATX
C30
R839 MB-127 (9/14) FORMAT1 IP R840 R843
XX XX XX
IC101 I
IC101 MC-10121F1-207-TA1-A
(10/15)
C815 0.001 C845 0.001 C851 0.001 R8004 XX C854 XX
MB-127 (14/14)
R841 PCONT2
XX
R8014 XX
5.6
IC801
OPTICAL TRANSMITTER IC801 GP1FAV51TKSF DIGITAL OUT (OPTICAL) 5 1.6 1 2
3.3
R890 XX
R892 XX Q815 2SC6053-T112-1F Q813, Q815 B- SWITCH Q813 RT1P241M-TP-1 3.2 3.1 R8005 3.3k R8009 10k C840 0.1
IC806
-5V REGULATOR IC806 L79M05TLL-SONY-TL-E -8.4 -8.5 -7.7 -8.4 I O -5
IC805
+3.3V REGULATOR IC805 NJM2878F3-33(TE2)
COM
R816 33
VCC IN GND R873 1k
1 4.9
3 1.3
R802 1k
C801 1
R803 1k 2.5
Q801 2SC3052EF-T1-LEF BUFFER
R831 XX
R8006 XX
R8013 XX J801 8P LINE OUT
C829 1 1.8
R874 XX
C827 XX
C832 XX
C833 1
C846 0.1
C849 0.1
D801 XX 2
3 1 S VIDEO
R801 10k
R804 1k
R817 220
R818 68
C804 1
R826 10k R848 XX R850 XX R849 XX
Q808 2SA2167-T111-1E G 12.3 11.6 C813 10 R878 10k Q808, Q809 B+ SWITCH R896 5.1k 0.5% C836 XX C838 3900p C837 XX 12.3
PS802 0.5A 50V
C817 0.01 JL831
C818 10
C816 XX
R883 1k
R8021 5.6k 0.5% R8022 150 0.5% C848 390p
C852 47 16V
R8029 470
R8036 470
R8038 100k
VIDEO
AUDIO (L) PR
CN801 5P
L
SWITCHING REGULATOR
PS804 1A 32V
UNSW-9VA GND UNSW6VA GND UNSW12VA
5 4 3 2 1 PS803 1A 32V
JL832 JL833 JL834 C808 XX R862 XX R876 XX 5 R815 XX 4.9 Q805 RT1P141M-TP-1 C831 47 16V R879 10k -8.5 -7.8 -8.5 Q805, Q807 B- SWITCH
R884 5.6k
R8033 XX R8010 150 0.5% Q816 RT3XAAM 1 O D804 XX -8.5 1.3 1.3
AUDIO (R) PB
R857 XX
R881 5.6k
-8.4
Q809 2SC3052EF-T1-LEF -7.8
R888 47k
R897 5.1k 0.5%
DIGITAL OUT (COAXIAL) Y 0 2 -
-VSS
MB-127 (3/14)
SW5VD
R889 100k
C809 XX
-8.5
IC807
LINE AMP IC807 NJM4558M-TE2
-8.4 0
MUTING
+VCC
Q807 2SC6053-T112-1F R851 XX R853 XX R856 XX C822 XX R870 XX D803 MC2838-T112-1 R8007 5.6k 0.5% C834 47 16V R8008 5.6k 0.5% R898 5.1k 0.5% R899 5.1k 0.5% C841 390p C843 0.1
5 1.3 1.3
6 0
0 -8.4 R8034 XX
D805 XX
COMPONENT VIDEO OUT
7 12.3
IC804
D/A CONVERTER IC804 AK4382AVTN-E2 D802 MA2J1110GLS0 4.9 1.6 1.7 1.2 1.7 3.3 3.3 3.3 0 1 MCLK 2 BICK 3 SDTI 4 LRCK 5 PDN 6 CSN 7 CCLK 8 CDTI DZFL 16 DZFR 15 VDD 14 VSS 13 AOUTL+ 12 AOUTL- 11 AOUTR+ 10 AOUTR- 9 2.5 2.5 2.5 2.5 5
C868 XX
R842 XX
R844 10k
R845 10k
R846 10k
R847 10k AO1MCK AO1BCK AO1BD
R8031 47k
C860 XX
R861 XX R864 R865 R866 R867 R868 R812 R813 R814 68 68 68 68 100 68 68 68
R8011 150 0.5% C839 3900p
C842 390p
C858 0.1
R8032 47k
C861 XX R8037 470
R8046 XX
GND DAC_XRST MC-10121F1_CSI0_DAC2_XCS MB-127 (9/14)
AO1LRCK
R8019 150 0.5% R8020 5.6k 0.5% C847 390p
C850 47 16V
R8030 470
Q812 ISA1235AC1TP-1EF R893 10k 10.6 10.6 -8.4
MC-10121F1_CSI0_CKO MC-10121F1_CSI0_DO XAMUTE
C835 1
C824 0.001
C826 0.22
C828 10 R882 470
R885 10k
Q811, Q812 MUTE DRIVE
R895 10k
C869 0.1
IC809
RESET IC809 PST8250UL
3 4
NC GND
VDD OUT
2 1
5.6 3.1 R877 4.7k
0 3.1 Q806 RT1N441M-TP-1 MUTE DRIVE R886 XX 0 Q811 RT1N240M-T111-1
10.6
P
05
4-15
BDP-S560
4-16. MB-127 BOARD (GPIO/JTAG) SCHEMATIC DIAGRAM (9/14) See page 5-7 for printed wiring board.
10
JL951 JL950
11
12
13
14
15
16
MB-127 BOARD (9/14)

A GPIO/JTAG
XX MARK:NO MOUNT
IC101
IC101 MC-10121F1-207-TA1-A R933 10k
(11/15)
R954 XX
MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL, A/V OUT, HDMI, ETHERNET I/F, USB I/F RB905 1k R943 XX D33 R934 MB-127 (8/14) MC-10121F1_CSI0_DO MC-10121F1_CSI0_CKO JL909 R937 JL911 JL912 22 R936 10k JL910 R935 22 22 JL7005 JL7006 D34 D35 S0DIN S0DOUT S0CKOUT SDA1 S2DIN S2DOUT S2CSB S2CKIN UA0RXDB UA0TXDB GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 GPIO7 GPIO8 GPIO9 GPIO10 GPIO11 GPIO12 GPIO13 GPIO14 GPIO15 GPIO16 GPIO17 GPIO18 GPIO19 GPIO20 GPIO21 GPIO22 GPIO23 GPIO24 GPIO25 GPIO26 GPIO27 GPIO28 GPIO29 GPIO30 GPIO31 GPIO32 GPIO33 GPIO34 GPIO35 GPIO36 GPIO37 GPIO38 GPIO39 GPIO40 GPIO41 GPIO42 GPIO43 GPIO44 GPIO45 GPIO46 GPIO47 GPIO48 GPIO49 GPIO50 GPIO51 GPIO52 GPIO53 GPIO54 GPIO55 GPIO56 GPIO57 GPIO58 TMODE0 TMODE1 TMODE2 TMODE3 TMODE4 TMODE5 RSTSWB TEST NMI EJTDI EJTCK EJTDO EJTMS EJTRST EJDINT B30 B32 B31 A32 A30 B29 R949 XX RB906 10k JL958 JL959 JL960 R953 100 R948 10k JL954 JL953 JL952 JL955 JL956 JL957 EJ2TDI EJ2TDO EJ2DINT EJ2TMS EJ2TCK RB902 10k R960 10k JL963 R978 10k CN903 XX 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 R942 10k C905 0.01 SW3.3V UX1RXDB UA1TXDB ICE1_TMS ICE1_TCK GND ICE1_TDI ICE1_TDO ICE1_BKTG GND ICE2_TMS ICE2_TCK GND ICE2_TDI ICE2_TDO ICE2_BKTG ICE1_TRST ICE2_TRST EXT_XRST RESERVE RESERVE TMODE2 TMODE3 TMODE4 (NC) R947 XX F31 G30 JL948 JL949 C907 XX C906 XX C909 XX C908 XX MC-10121F1_DIPSW1 R962 22 R963 22 R977 10k JL917 JL918 SCL1 SDA0 SCL0 H31 J30 JL944 JL945 R945 H30 G31 JL946 JL947 R961 XX R944 XX CN902 6P JL923 R946 XX JL962 1 2 3 4 5 6 3.3V GND RXD TXD DIPSW1 DIPSW0 (JIG) XX
JL906
C34 C33 B33 C32
C
R904 XX IF_SDO R903 XX IF_SDI
EJ2TDI EJ2TCK EJ2TDO EJ2TMS EJ2TRST EJ2DINT
JL926 JL927 JL928 JL929 JL930 JL931
R938 10k
H17 G18 J17 F19 E19 J16 R930 10k JL7032 JL7011 R939 XX JL933 F18 E18 D32 E31
MC-10121F1_DIPSW0
D
IF_SCK MB-127 (14/14)
R902 XX
R922 10k
RB901 10k
R909 XX XIF_CS R911 XX START_BIT R910 XX SYSCON_REQ R912 XX SYSCON_RST R919 0 R914 XX MB-127 (10/14) MB-127 (8/14)
FORMAT0 FORMAT1 ASPECT0 ASPECT1 IP
E30 J28 G29 H28
JL913 JL914 JL915 R932 XX JL916 JL934 JL968 JL969 JL966 JL973 R923 MC-10121F1_DIPSW0 MC-10121F1_DIPSW1 R940 R924 R925 XX XX R926 JL922 R927 22 22 R941 10k R921 10k 10k 10k JL7030 JL979 JL974 JL978 JL920 JL921 JL975 JL976 JL924 R928 22 JL977 JL925 R929 XX JL972 JL971 JL967 JL970 JL987 JL964 JL997 JL988 JL991 JL994 JL980 JL984 JL981 JL965 JL998 JL982 JL983 JL992 JL995 JL989 JL985 JL986 JL999 JL990 JL993 JL9001 JL996 JL932 JL7033 R931 XX
G28 F29 AC30 AC31 AB32 AD30 H16 AK27 AG28 AJ28 AH26 AJ26 AH27 AK28 AJ27 AK26 AD29 AC33 AB33 AC32 D22 A26 G21 D23 E22 F22 B25 C24 B26 A28 G22 B27 B28 E23 F23 D24 C25 C26 G23 D25 E24 G24 F24 F30 H29
AOHTX AOHLRCK AOHBCK AOHBD0
F
MB-127 (8/14)
MB-127 (5/14)
GLB_XRST NAND_WP
JL919
H26 H25 H27 J24 H23 J25 H22 H24 F25
JL939 JL940 JL9002 JL9004 JL9003 JL941 JL961 JL942 JL943
XAMUTE XVMUTE MC-10121F1_CSI0_DAC2_XCS DAC_XRST AOHBD1
EJ2TRST EXT_XRST
AOHBD2 AOHBD3 AOHMCK VOCLK VOHSB VOVSB VODY0 R916 XX R918 XX VODY1 VODY2 VODY3 8 VCC 7 1Y 6 2B 5 2A MB-127 (10/14) VODY4 VODY5 VODY6 VODY7 VODY8 VODY9 VODC0 VODC1 VODC2 VODC3 MB-127 (5/14) (6/14) (11/14) MC-10121F1_XRST R917 XX VODC4 VODC5 VODC6 VODC7
RB903 10k
RB904 10k
H
IC901 XX
GND 4
1A
1B
2Y
R915 XX MB-127 (6/14)
VODC8 VODC9 USB_VBUS_PCONT
K
05
C902 XX MB-127 (3/14) MC-10121F1_SW3.3V GND
C901 XX
C903 XX
C904 XX
EXT_XRST
4-16
BDP-S560
4-17. MB-127 BOARD (IPIO) SCHEMATIC DIAGRAM (10/14) See page 5-7 for printed wiring board.
10
11
12
13
CN7001 XX
14
MB-127 BOARD (10/14)

A IPIO
XX MARK:NO MOUNT
ATA0_XCS0 ATA0_XCS1 ATA0_DA2 ATA0_DA1 ATA0_INTRQ ATA0_DA0 ATA0_XDMACK
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ATA0_D15 15 16 17 18 19 20 21 22 R7017 XX 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 R7018 XX R7020 XX R7019 XX R7021 XX
CS0 CS1 DA2 DA1 INTRQ DA0 DMACK GND IORDY GND DIOW GND DIOR GND DMARQ DD15 GND DD13 GND DD3 GND DD4 GND DD7 GND DD9 GND DD2 GND DD14 GND DD6 GND DD0 GND DD11 GND DD12 GND DD1 GND DD10 GND DD5 GND DD8 RESET DASP CBLID/PDIAG SW3.3V_PULLUP (NC)
IC101
(12/15)
_ATA0_D15 _ATA0_D13 _ATA0_D3 _ATA0_D4 RB7002 XX RB7001 XX ATA0_D15 ATA0_D13 ATA0_D3 ATA0_D4 ATA0_D7 ATA0_D9 ATA0_D2 ATA0_D14 RB7003 XX ATA0_D6 ATA0_D0 ATA0_D11 ATA0_D12 RB7004 XX ATA0_D1 ATA0_D10 ATA0_D5 ATA0_D8
R7001 XX
ATA0_IORDY
MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL, A/V OUT, HDMI, ETHERNET I/F, USB I/F IC101 MC-10121F1-207-TA1-A RB7014 10k RB7008 10k RB7010 10k RB7011 10k RB7012 10k RB7013 10k RB7015 10k PTEST00 N7 N6 P9 T15 U16 R8 R9 U14 T8 U15 R7 P8 P7 T16 N8 P13 T9 L7 N13 P14 R17 R16 N15 R15 T17 R14 R13 N14 K7 P15 M7 JL7052 JL7053 JL7056 JL7072 JL7071 JL7073 JL7074 JL7075 JL7076 JL7070 JL7069 JL7055 JL7054 JL7068 JL7051 JL7050 JL7066 JL7046 JL7063 JL7049 JL7061 JL7060 JL7059 JL7062 JL7065 JL7058 JL7057 JL7064 JL7047 JL7048 JL7067 _ATA0_D0 _ATA0_D1 _ATA0_D2 _ATA0_D3 _ATA0_D4 _ATA0_D5 _ATA0_D6 _ATA0_D7 _ATA0_D8 _ATA0_D9 _ATA0_D10 _ATA0_D11 _ATA0_D12 _ATA0_D13 _ATA0_D14 _ATA0_D15 _ATA0_XRESET _ATA0_DASP _ATA0_XDIOR _ATA0_XDIOW _ATA0_XCS0 _ATA0_XCS1 _ATA0_DA0 _ATA0_DA1 _ATA0_DA2 _ATA0_XDMACK _ATA0_DMARQ _ATA0_INTRQ _ATA0_HIOCS16 _ATA0_IORDY _ATA0_PDIAG
ATA0_XDIOW
ATA0_XDIOR
_ATA0_D7 _ATA0_D9 _ATA0_D2 _ATA0_D14 _ATA0_D6 _ATA0_D0 _ATA0_D11 _ATA0_D12 _ATA0_D1 _ATA0_D10 _ATA0_D5 _ATA0_D8
ATA0_DMARQ
PTEST01 VOCLK VOVSB VOHSB VODY8 VODY9 VODY6 JL7022 JL7021 JL7044 JL7035 JL7034 JL7037 JL7036 JL7039 JL7043 JL7040 JL7038 JL7017 JL7013 JL7042 JL7041 JL7012 JL7015 JL7018 JL7016 JL7014 JL7019 JL7077 JL7020 JL7025 JL7027 JL7026 JL7023 JL7024 JL7001 JL7002 JL7028 TEST1 PTEST02 PTEST03 PTEST04 PTEST05 PTEST06 PTEST07 PTEST08 PTEST09 PTEST10 PTEST11 PTEST12 PTEST13 PTEST14 PTEST15 PTEST16 PTEST17 PTEST18 PTEST19 PTEST20 PTEST21 PTEST22 PTEST23 PTEST24 PTEST25 PTEST26 PTEST27 PTEST28 PTEST29 PTEST30
ATA0_D13
ATA0_D3
ATA0_D4
VODY7 VODY4 VODY0 VODY3 VODY5 VODC4 VODC8 VODY1 VODY2
ATA0_D7
ATA0_D9 R7010 XX ATA0_D2 R7016 XX
ATA0_D14
_ATA0_XRESET
R7014 XX R7002 XX R7008 XX R7003 XX R7009 XX R7004 XX R7005 XX R7006 XX RB7009 XX
ATA0_XRESET
ATA0_D6
MB-127 (9/14)
VODC9 VODC6 VODC3 VODC5 VODC7 VODC2 VODC1
_ATA0_DMARQ
ATA0_DMARQ
ATA0_D0
_ATA0_XDIOW
ATA0_XDIOW
ATA0_D11
_ATA0_XDIOR
ATA0_XDIOR
ATA0_D12
_ATA0_IORDY
ATA0_IORDY
VODC0 AOHMCK AOHLRCK AOHBCK AOHBD0 AOHBD1 AOHBD2 AOHBD3
ATA0_D1
_ATA0_XDMACK
ATA0_XDMACK
ATA0_D10
_ATA0_INTRQ
ATA0_INTRQ
ATA0_D5
_ATA0_DA0 _ATA0_XCS0 _ATA0_XCS1
ATA0_DA0 ATA0_XCS0 ATA0_XCS1 ATA0_DA2 ATA0_DA1 ATA0_XRESET ATA0_DASP ATA0_PDIAG
ATA0_D8
AOHTX
U13
JL7045
_ATA0_DA2 _ATA0_DA1 R7041 XX R7040 XX
_ATA0_DASP RB7007 10k
ATA0_DASP
MC-10121F1_SW3.3V MB-127 (12/14)
R7036 XX R7042 XX R7043 XX ATA0_PDIAG C7001 XX
R7037 XX DR_VCC33
MB-127 (3/14)
R7039 XX _ATA0_HIOCS16 _ATA0_PDIAG
GND
05
4-17
BDP-S560
4-18. MB-127 BOARD (ETHERNET) SCHEMATIC DIAGRAM (11/14) See page 5-7 for printed wiring board.
10
11
12
13
MB-127 BOARD (11/14)

A ETHERNET
FB1103 R1101 10 49.9 49.9 49.9 R1103 49.9 C1109 0.01 C1110 4.7 FB1101 SW3.3V MC-10121F1_SW3.3V GND ETRXER ETTXD1 ETTXD0 C1105 XX XX XX C1101 0.022 C1106 0.01 L1101 XX C1111 0.01 C1116 0.01 C1117 0.01 C1118 10 C1119 0.1 MB-127 (3/14)
R1106
R1107
R1105
C1104
C1103
C1102
R1122 XX VDD
X1101 50MHz OE GND ETTXD0 R1128 0
FB1102
R1141 1.5k
R1142 1.5k
C
CN1101 8P LAN (100) 1 JL1101
2 3.3
OUT
JL1106 JL1107 JL1108 JL1109 JL1110 JL1111 JL1112 JL1113 JL1114 JL1115
R1137 47 R1138 R1139 47 47
JL1117 JL1118 JL1119 JL1120
V31 V30 V32 T32 T33 T34 U33 U30 U31 U29
4 L1102 3
27 26 25 24 23 22 21 20 19 TXCLK RX_ER VDDIO TXD3 TXD2 TXD1 TXD0 RX_CLK RX_DV
12
RXD0 RXD1 RXD2 RXD3 18 17 16 15 14 13 12 11 10 0 0 0 0 1.6
ETREFCLK
ETTXD1 ETTXEN ETMDC
ETTXD0 ETTXD1 ETTXEN ETMDC ETMDIO ETREFCLK ETCRS ETRXD0 ETRXD1 ETRXER
R1124 0
R1129 XX ETRXD0 ETRXD1 R1131 R1132 R1130 R1133 R1134 XX XX XX 10k 10k
3.3 3.3
ETMDIO ETREFCLK ETCRS ETRXD0 ETRXD1 ETRXER
28 29 30 31 32 33 34 35 36
TXN TXP VDDA3.3 RXN RXP VDDA3.3 nINT/TX_ER_TXD4 EXRES1
3 2 5 4 6 7 8
JL1102 JL1103 JL1104 JL1105 JL1121 C1107 0.01 C1108 0.01 XX XX 4 1
3.3 3.3 3.3 3.3 1.2 3.3 0
IC1101
ETHERNET PHY IC1101 LAN8700C-AEZG
REFCLK XTAL2 FDUPLEX VDD_CORE ACTIVITY SPEED100 LINK
0 0 0
VDDA3.3 CRS_DV
R1140 XX
TX_EN
VDD33
MDIO
D1103
D1104
E
D1102 XX
R1102 2.4k 0.5% D1105 XX
R1104 10k 0.5%
nRST
MDC
CRS
R1135 10k
IC101
(13/15)
1 3.3
2 0
3 0
4 3.3
5 3.3
6 0
7 3.3
8 1.8
9 D1101 XX 0
R1136 XX
R1115 XX
R1111 XX
R1110 10k
R1118 10k
R1113
R1119
100
10k
R1108 10k
C1112 0.01
C1114 4.7
C1115 0.1
R1123 10k
C1113 0.01
G
05 ETMDIO ETMDC ETCRS
MC-10121F1_XRST
MC-10121F1_XRST ETTXEN
JL1116
MC-10121F1_XRST
MB-127 (9/14)
4-18
BDP-S560
4-19. MB-127 BOARD (RF SDRAM) SCHEMATIC DIAGRAM (12/14) See page 5-7 for printed wiring board.
10
11
12
13
14
15
16
17
MB-127 BOARD (12/14)

A RF SDRAM
XX MARK:NO MOUNT
IC101
IC101 MC-10121F1-207-TA1-A
(14/15)
C1255 0.01 C1256 0.01 C1257 100p C1258 100p C1259 1 C1268 1
FB1251 XX
C1251 XX
K1
B
TXD GND RXD 3.3V (NC) SDAENZ SDACLK
CN1235 XX 9 8 7 6 5 4 3 2 1 R1234 R1235 R1236 R1237 1k 1k 1k 1k
C1209 0.1 C1210 0.1 C1203 0.1
J1 X1201 25MHz M9 N9
X1 X2
MD0 MD1 MD2 MD3
K9 J9 J10 G17 G16 J14 H15 H14 F16 G15 J15 F17 H11 J11 L9 J8
MD[0] MD[1] MD[2] MD[3] MD[4] MD[5] MD[6] MD[7] MD[8] MD[9] MD[10] MD[11] MD[12] MD[13] MD[14] MD[15] RB1253 22 LDQM MD[4] MD[5] MD[6] MD[7] C1252 0.01 RB1252 0 MD[0] MD[1] MD[2] MD[3] C1253 100p RB1251 0 C1254 100p
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
VDD DQ0
VSS DQ15
54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 R1258 10 R1259 22
VDD15OSC GNDOSC
MD4 MD5 MD6
RB1259 0 MD[15] MD[14] MD[13] MD[12] RB1258 0 MD[11] MD[10] MD[9] MD[8] C1205 XX C1206 XX C1204 XX UDQM MCLK RB1257 22 MCKE MA[11] MA[9] MA[8] MA[7] MA[6] MA[5] MA[4] RB1256 22
VDDQ VSSQ DQ1 DQ2 DQ14 DQ13
JL1307 JL1305 JL1207 JL1208 R1209 SA_DRV_A SA_DRV_B R1210 2.2k 2.2k JL1285 JL1306 JL1284 JL1283 R1211 10k
G6 H7 G5 H6 J7 K8 J6 J5
PA0 PA1 PA2 PA3 PA4 PA5 PA6 PA7
MD7 MD8 MD9 MD10 MD11 MD12 MD13 MD14 MD15
VSSQ VDDQ DQ3 DQ4 DQ12 DQ11
SDA1SO SDA2SO GND
VDDQ VSSQ DQ5 DQ6 DQ10 DQ9
C1224 0.001
C1220 XX IC1220 XX R1212 10k R1256 XX
VSSQ VDDQ DQ7 VDD DQML WE CAS RAS CS BA0 BA1 A10 A0 A1 A2 A3 VDD DQ8 VSS N.C. DQMH CLK CKE N.C. A11 A9 A8 A7 A6 A5 A4 VSS
MB-127 (13/14) 3 2 DRVCTL1 DRVCTL2 DRVCTL3
D
CN1220 XX DDO_2 DDO_1 DMS 1 2 3 4 5 6 7 8 C1221 XX R1221 XX
JL1282 JL1281 JL1255 JL1256 JL1290 JL1302 JL1303 JL1304
D12 D13 E13 E12 K5 L8 P17 N17
PB0/SW1 PB1/SW2 PB2/SW3 PB3/SW4 PB4 PB5 PB6 PB7 MA0 MA1 MA2 MA3 MA4 MA5 MA6 MA7
D16 D14 D17 D18 C16 E17 D15 E14 E16 F13 E15 F15
JL1280 JL1279 JL1278 JL1277 JL1275 JL1252 JL1276 JL1249 JL1253 JL1250 JL1254 JL1248 R1263 R1262 R1261 R1260 10k XX 10k XX R1266 XX
MA[0] MA[1] MA[2] MA[3] MA[4] MA[5] MA[6] MA[7] MA[8] MA[9] MA[10] MA[11]
WE/ CAS/ RAS/
5 RB1220 XX
LDEN
MBA0 MBA1 MA[10] RB1254 22 MA[0] MA[1] MA[2] MA[3] RB1255 22 C1263 1 C1264 1
20 21 22 23 24 25 26 27
(NC)
DRST DDI GND DCK 3.3V
R1223 10k
C1222 0.001
JL1221 JL1291 JL1292
J4 K2 L2
MA8 PC0 PC1 PC2 MA9 MA10 MA11
C1223 0.1
JL1224 JL1225 JL1226
P6 M5 N5 M4 N4 M3 P5
F
TRAYOUT SA_INT MB-127 (13/14) DR_SW12V PI_CONT INSW_BU LDD_RST FB1271 XX FB1272 XX DR_SW12V R1271 2.2k MB-127 (3/14) R1272 2.2k C1279 0.001 C1272 100 16V C1265 100 16V FB1273 XX CL1270 TRAYIN C1271 0.001 FB1260 XX C1273 0.001 R1231 10k MB-127 (13/14) C1262 0.001 C1261 0.001 C1231 0.1 R1208 10k C1208 0.1 R1232 XX
PSI0 PSI1 PSI2 PSI3 PSI4 PSI5 PSI6
LDQM UDQM
J12 J13
JL1264 JL1265
LDQM UDQM
IC1251
64M SDRAM IC1251 K4S641632N-LC60
JL1227 JL1228 JL1229 JL1230
WEB MCLKOUT CASB MCKE RASB
H12 H13 G12 G13 G14
JL1257 JL1259 JL1239 JL1240 JL1241 R1250 XX
WE/ MCLK CAS/ MCKE RAS/ R4121 XX MBA0 MBA1 R1243 XX R1244 XX C1289 9p R4122 XX R4101 XX R4102 XX
R4103 XX
R4104 XX
R4105 XX
R4106 XX
R4107 XX
R4108 XX
R4109 XX
R4110 XX
JL1298
R6 R2 P2 N2 R3 R4 P3 P4
P50 P51 P52 P53 P54 P55 P56 P57 SFSIO3 SFSCK MBA0 MBA1
R4123 XX
R4124 XX
R4125 XX
R4126 XX
R4127 XX
R4128 XX
R4129 XX
R4130 XX
R4131 XX
R4132 XX
F14 F12
JL1272 JL1251
C1267 0.001 DR_SW5V FB1265 XX
GND1 XX
FB1270 XX FB1262 XX
C1266 0.001
FB1287 XX
FB1296 XX DR_VCC15 MB-127 (13/14)
J3 L4 K4 J2 L3 K3
JL1269 JL1273 JL1271 JL1268 JL1270 JL1274 R1247 XX R1246 XX R1242 XX R1248 XX R1245 XX C1288 4.7 L1287 2.2uH C1287 2.2 C1286 10 R1287 180k 0.5%
FB1297 XX
FB1266 XX FB1261 XX
G4 H5 G3 SEN_LDD SDCK JL1300 JL1245 JL1301 H4 G2 H3
SFSIO0 SDCS3B SDCS2B SDCS1B SDCS0B SDCK SDIO SFSIO2 SFSIO1 SFCS0B
FB1298 XX
VCC
HOLD/SIO3 SO/SIO1
SCK
SI/SIO0
IC1245
16M S-FLASH IC1245 MX25L1635DM2I-12G
CL1290 10 RESETN 9 FB 8 VIN1 7 Lx 6 PGND
W/SIO2
CS
DR_SW5V R1241 XX
GND
SDIO MB-127 (13/14)
11 Fin
IC1280
+1.5V/+3.3V REGULATOR IC1280 SM8170BD-G-EL
R1289 120k 0.5%
C1295 0.01
C1215 22 10V
C1298 XX
C1297 XX
C1296 XX CL1280
ENDCO
VIN2
GND
ENLDO
LDOUT
5 R1284 1k
C1282 4.7
C1293 0.01
C1233 22 10V
C1291 XX
C1292 XX MB-127 (14/14)
ATA_PCONT2 FB1291 XX
J
C1245 0.1 05 GND C1281 4.7 R1285 XX C1285 XX FB1282 XX
FB1292 XX
R1293 XX DR_VCC33 MB-127 (10/14) (13/14)
4-19
BDP-S560
4-20. MB-127 BOARD (DRIVE/RF) SCHEMATIC DIAGRAM (13/14) See page 5-7 for printed wiring board.
- Ref. No.: MB-127 board; 10,000 series 1 2 3 4 5 6 7 8 9 IC101
6 GND 5 GND C1354 XX IC101 MC-10121F1-207-TA1-A
10 (15/15)
11
12
13
14
15
16
17
18
19
MB-127 BOARD (13/14)

A DRIVE/RF
XX MARK:NO MOUNT
C1355 XX
BD DRIVE MB-127 (12/14) TRAYOUT INSW_BU
BD DRIVE (NC)
TRAYIN
VCC
OUT
SIGGND
ADJ
EN
FGND
FGND CN4261 5P 1
HW+
/A
4 R1354 220k 0.5% R1356 1k
MDRV SL_DRV_B SL_DRV_A
JL1383 JL1382 JL1384
D1 C2 D2
MDRV
VDD15WBLAD SDRV2 GND_WBLAD SDRV1
E4 E5
C4263
0.01 CN4201 18P
/B
DR_VCC33
LD-
C4262
0.01
LD+
HU-
HB-
HV-
FDRV
GND
HU+
HW-
HB+
HV+
FDRV1
E1
INSW
JL1385
18 17 16 15 14 13 12 11 10
FGND 2 CN4262 XX
VDD15RVAD
DR_VCC15
MB-127 (12/14)
C4264 R4255 4.7k FG JL4245 BD_RF+ CL1332 CL1331 CL1329 CL1328 C1361 1 R1362 6.2k CL1363 CL1364 CL1365 C1302 XX CL1301 CL1366 CL1367 JL1376 CL1368 C1332 C1331 C1329 C1328 0.1 0.1 0.1 0.1 M2 A7 A6 A5 A4 B13 B14 B17 A17 A16 B16 C15 A15 B15 A13 A14 C1370 0.033 FG RFP RFN RFP2 RFN2 CEQ AVDD33 AVDD33 B5 C3 C4272 C4273 AVDD15 AVDD15 AVDD15 AVDD15 AVDD15 C10 C13 F2 F3 C8 C4268 C4266 C4265
0.01 0.01 SL4261
IC1351
+8V REGULATOR
R4218 470
R4202 XX
0.01 R4206 XX R4217 470 0.01
LDEN MB-127 (12/14) DR_SW12V XX XX 0.1
4 5 6
EN NC VCC 7
GND FB Vo
3 2 1 0.01 10
BD_RFDVD_RF+
0.01 0.01
R1358 68k 0.5%
R1359 150k
DVD_RF-
R4209 XX
R4244 XX
R4234 XX DR_SW5V SA_B-
SL_A+
SL_A-
HW+
C1357
C1351
R1352
C1353
C4295
RFEQOM RFEQOP MON1/RFP4 MON2/RFP5 MON3/RFP6 ADIN0/RFP7 ADIN1 CAGC1 CAGC2
AVDD33 AVDD33
C4276
0.01 R4248 XX DRVCTL2
G7 C9
HU+
HW-
HV+
HU-
HV-
AVDD33
C4274
0.01
SL_B-
REQ
SL_B+
F6
LD+
LD-
IC1351 BD35630HFV-TR C1356 0.022
R4201 XX
TRAY-IN
TDRV
JL1386
F1
TDRV
C12
TRAY-OUT
IC1352 XX
SA_B+ SA_ASL_B+ SL_BSA_A+ R4243 XX R4235 XX R4238 XX R4232 62k 0.5% R4231 62k 0.5% CL4237 CL4236 R4229 75k 0.5% R4228 68k 0.5% C4230 0.1 SA_DRV_B DRVCTL3 SL_DRV_A MB-127 (12/14)
D
CN1302 XX (NC)
C1350 100 16V
C1352 XX 16V R1355 27k 0.5%
CL1302
R1302 15k 0.5%
AGND AGND AGND AGND
A8 B3 B4 C6 MB-127 (12/14) DRVCTL1
R4249 XX C4247 100p
FGND FGND
1 2 GND2 XX
R1309 0
R1301 10k 0.5%
C1369 4.7
SL_A+
SL_A-
R1357 XX
C1359 0.1
R4251 XX CL4251
SL_DRV_B
E
GND TEST_V GND LDEN XRST SDIO
CN1301 45P 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 R1335 1k C1326 0.01 C1321 0.01 C1314 0.01 C1310 C1311 0.001 0.01 R1310 R1303 C1305 4.7k 0.001
C1309 XX
OP_A OP_B OP_C OP_D
CL1325 CL1324 CL1323 CL1322 CL1320 CL1319 CL1318
JL1375 JL1377 JL1378 JL1374
A12 B11 B12 A11 A9 A10 B9
AGND A B C D E F G/FOP DVDD33 DVDD33 DVDD33 AGND AGND AGND AGND
C14 F4 F5 C7 470p C11 FB4284 XX SL4254 0.33 1/2W 10k 10k DR_SW12V
SA_DRV_A
100p
100p
0.001
R4259
R1305
10 LDD_RST SDIO SEN_LDD MB-127 (12/14)
C4246
C4253
R4252
C4245
C4237
OP_G
N3 E11 C17 M6
C4282 C4283 C4284 C4285 C4286
0.01 0.01 0.001 0.01 0.01 C4287 1
SEN_LDD SCLK THERMO 8.0V 5.0V GND GND 3.3V
MGND1 XX
C4235
OP_F
G1
R4258
OP_E
0.001
2.2k FB1310 XX R1308 10k 0.5% XX 4.7k XX C1315 4.7
SDCK
C1371 0.1
C4250 0.01 CL4243 JL4234 JL4233
R4233 XX R4230 XX
JL4239 JL4236
D6 E7 D10
DVDD33 CBC CAD RFTST3/RFP3 DVDD15 AGCINP AGCINN DVDD15 DVDD15 DVDD15 RFON RFOP DVDD33
C4252 0.1
FB1311 R1311 C1312 FB1314 XX
C1372 0.1
JL1373
H2 L5 G11 K6
JL4244 JL4238 C1375 100p
C4292 C4293 C4294
0.01 0.01 0.001 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 Fin FG SPCNF BTHC V U SPIN SPVM 55 SPGND TKOSL/SAGND TKO+ SLO2TLO+ SLO2+ TLOSLO1CHG_C SLO1+ FCOSAO2FCO+ SAO2+ PickCTL SAO1ICTL SAO1+ AVM SLDETOUT FCIN SLDET TLIN SLIN2 TKIN SLIN1 VC SL/SAVM DVCC SAIN2 DGND SAIN1 0.001 C4225 0.1 C4222 XX C4223 XX C4224 XX C4221 C4226 C4227 1 C4244 XX C4228 10 C4220 0.001 10k 10k 10k FB4225 XX R4225 R4214 CL4212 CL4213 CL4214 CL4215 CL4217 CL4218 R4219 0 33k 33k R4222 R4223 FDRV2/LDDRV R4224 33k DR_VC_165 FDRV1 TDRV FD2 FR2 FR1 FD1 TR TD R4212 0.001 CTL1 CTL2 W
E10 F10
GND GND H G F E VC_PD D BD DRIVE
RB1317 XX
OP_H OP_G OP_F OP_E DR_VC_PD
C1378 10 C1303 10
C1301 0.01 C1376 10
JL4237 JL4240
E9 D9
HU-
CREG VREFIO REF16
FB1321 C1316
XX 10
DR_VC_PD OP_D OP_C OP_B OP_A
B7 D8 FB1301 XX C1377 0.01
DGND DGND
D11
HV-
B6
C18
VCC
HU+
HW-
HV+
JL1379
LDIN
HW+
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
C B A 5V_PD GND DVD_RFDVD_RF+ GND
OP_H
CL1317
B10
DGND H/FOM DGND DGND RFTSTIN1 RFTSTIN2 REF075 DGND DGND
F11 H1 L1 L6 M8
IC4201
MOTOR DRIVE IC4201 BD7986EFV-E2
FB1326 C1327 XX
XX C1382 10 C1384 0.01 C1385 C1386 DVD_RFC1387 C1388 DVD_RF+ BD_RF+
CL1380
JL1380 JL1381
B8 D7 E8
JL4235 0.01 0.33 0.33 3900p JL1393 JL1390 JL4241 JL4242 JL1389
F9 G10 F8 G9 H10 E6 F7
CBHWBL/CID CBHLPP CBCO CADO CWHP CWAGC RLD 0.01 0.01 0.01 C4207 0.1
BD_RFBD_RF+ GND PI_CONT SA_INIT SA_B+ SA_A+ SA_B-
RB1322 XX R1334 XX C1335 0.01
BD_RFC1389 0.047
C5 D5 C4 RB1328 XX MB-127 (12/14) JL1391 JL1392 FB1393 XX DR_VC_165 FDRV2/LDDRV JL1387 JL1388 C1394 10 C1393 0.01 D3 E2 E3 G8 H9 D4
FPDVINP FPDVINN FPDVINP2 FPDVINN2
C4201
C4203
SA_AFD2 FR2 TR TD FR1 FD1
C4205
R4208 XX
C4209 0.1 HW+ HU+ HWHV+ LD+ MDRV FG HUHVLD-
PI_CONT SA_INT
RFTST1/SWRF1 RFTST2/SWRF2
SA_B+
SA_A+ SA_BSA_AFD2 FR2 TR TD FR1 FD1
DAOUT2 DAOUT0 DAOUT1
C1395 2200p
JL4243
H8
WALPF1
C4151 XX
C4152 XX
L
GND
C4160 XX
C4161 XX
C4162 XX
C4163 XX
C4164 XX
C4165 XX
C4166 XX
C4167 XX
C4168 XX
C4169 XX
05
4-20
AGND
LDO+
LDO-
C1374 100p
BDP-S560
4-21. MB-127 BOARD (IFD) SCHEMATIC DIAGRAM (14/14) See page 5-7 for printed wiring board.
10
11
12
13
14
15
UNSW3.3V UNSW6V KEY0 SW3.3V CN1404 17P 1 IT_3.3V GND FR_6V FR_6V GND LED_DIM FLD_PCONT LED_CK GND LED_DT FLD_STB GND KEY 1 KEY 2 KEY 3 GND SIRCS
16
MB-127 (3/14)
17
MB-127 BOARD (14/14)

A IFD
FLD_PCONT FLD_SCK FLD_SDO FAN_CONT0 FAN_CONT1 FAN_CONT2 FLD_STB FAN_DET1 XHP_IN 2 R1439 10k KEY0 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
B
R1422 100k C1411 0.1 C1412 0.1 R1417 100 R1418 100
LED_DIMMER FLD_PCONT FLD_SCK C1420 0.1 TH1401 R1442 XX C1413 0.1 C1414 0.1
FLD_SDO FLD_STB
FR-302 BOARD CN701 (SEE PAGE 4-6)
10k
10k
R1427
PCONT2 PCONT3
PCONT3
R1432
R1441 10k
MB-127 (3/14) (7/14) (8/14)
PCONT2
R1448 2.7k 0.5% R1446 100
RB1401 10k
R1465 220k
KEY1 KEY2 KEY3
PCONT1 MB-127 (3/14) PCONT4 ATA_PCONT MB-127 (12/14)
JL1442
PCONT1 PCONT4 3.3 3.3 ATA_PCONT 3 0
KEY0 RB1402 100 3.3 3.3 3.3 3.3 2.4 3.3 KEY1 KEY2 KEY3
SIRCS_IN
VREF
ADSP_BOOTCFG
VCC
FLD_PCONT
FLD_SCK
FLD_SDO
DEST1
FAN_CONT0
FAN_CONT1
FAN_CONT2
FAN_DET1
XHP_IN
33V_det
TEMP
KEY0
VSS
ATA_PCONT2
ATA_PCONT2
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 C1415 0.1 C1416 C1417 0.1 0.1 3.3 SYSCON_RST2 XIF_CS R1456 100 C1418 XX START_BIT R1459 R1450 100 10k R1462 100k SYSCON_RST2 SYSCON_REQ SYSCON_RST LED_DIMMER ATA_PCONT MB-127 (6/14) R1487 XX R1485 XX R1486 XX C1419 0.1 5.7 1 2
START_BIT IF_SCK IF_SDO MB-127 (9/14) IF_SDI SYSCON_REQ SYSCON_RST
START_BIT IF_SCK IF_SDO IF_SDI SYSCON_REQ SYSCON_RST XIF_CS JL1441 XHP_IN C1404 XX C1403 XX X1401 XX R1482 10k C1407 10 R1407 4.7k R1413 100 R1412 100 JL1440 2.6 3.3 1 2 3 4 C1410 0.1 3.2 0 R1401 XX X1402 XX R1472 XX C1408 0.1 R1414 100 EXT_POW_ON/OFF RF_ON/OFF P_CON_W5V P_CON_H3.3V R1415 R1416 R1431 R1435 R1466 0 0 0 0 0 R1479 XX R1488 XX R1409 22k R1480 0 R1411 0 R1467 R1475 R1476 R1477 R1478 XX XX XX XX XX 5 6 7 8 9 10 11 12 13 14 15 16 NC
KEY1 KEY2 KEY3 PFAIL SYSCON_RST2
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
3.3 3.3 3.3 3.3 3.2 3.1
IC1404
P FAIL IC1404 PST8250UL VOUT VDD GND NC 4 3
FLD_STB MODE XCIN XCOUT /RESET XOUT AVSS XIN AVCC EXT_POW_ON RF_ON PCON_W5V PCON_H3.3V
XIF_CS
IC1403
SUB SYSTEM CONTROL IC1403 R5F212A7SNA18FP
XIF_CS NC NC NC START_BIT RXD1 TXD1 SYSCON_REQ SYSCON_RST
JL1432 JL1443 3.3 0 0 0.2 3.3 3.3 3.3
0 3.3
R1449 XX
R1483 10k
SIRCS_IN
PCONT2
PCONT3
PCONT1
NC PCONT4
CEC
NC
HDMI_PCONT
3 4 CN1401 XX
NC GND
VCC OUT
2 1
VBUS_DET
NC
NC
MB-127 (7/14)
CEC
IF_SDI
R1408 220k
ATA_ PCONT2
IF_SDO
IF_SCK
IC1402 XX
C1409 0.1
XHUB_RST
XHUBRST
HDMI_PCONT
P_CON_F5V
PCON_F5V
LED_DIMMER ATA_PCONT1
R1464 100k
E_VBUS_DET Q1409 XX CN1405 14P 1 2 3 GND SW3.3V GND SW3.3V GND VBUS_DET E_VBUS_DET GND XHUB_RST P_CON_F5V P_CON_H3.3V P_CON_W5V RF_On/Off Ext_Pow On/Off
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 0 3.3 3.2 3.3 3.3 3.2 0 3.3 3.3 JL1423 JL1424 3.3
JL1412
G
(NC)
GND MODE VCC RESET NC
1 2 3 4 5
VBUS_DET
R1481 XX S1401 XX R1424 XX
JL1413
RB1403 100 VBUS_DET R1438 10k R1443 100k R1445 100k XHUB_RST P_CON_F5V P_CON_H3.3V R1484 XX R1430 10k P_CON_W5V RF_ON/OFF EXT_POW_ON/OFF
4 5 6 7 8 9 10 11 12 13 14
HU-012 BOARD CN105 (SEE PAGE 4-7)
H
NC MODE IFCON FLASH WRITTER IF_RXD IF_TXD GND VCC
CN1402 7P 1 2 3 4
R1406 27k
R1421 100
R1420 100k
R1419 3.3k
PCONT3
PCONT1
PCONT2
RESET
CN1403 3P
M1401 (FAN)
FAN_OUT FAN_DET GND
3 2 1
FAN_DET1
J
CONT GND Vout ADJ Vin
FAN_CONT0
IC1401
FAN CONTROL IC1401 PQ200WNA1ZPH 1 12 2 0 3 0 4 0 5
MB-127 (3/14)
R1410 1k UNSW12V FAN_CONT1 R1402 4.7k 0.5% R1403 1.6k 0.5% R1404 560 0.5%
Q1408 RT3N11M-TP-1 FAN SPEED CONTROL 0 FAN_CONT2
L
05
C1401 1
C1402 1
R1405 910 0.5% GND
4-21
PCONT4
IF_SDO
IF_SCK
ATA_PCONT2
5 SIRCS_IN IF_SDI
BDP-S560
4-22. USB-016 BOARD (USB REAR CONNECTOR) SCHEMATIC DIAGRAM

- Ref. No.: USB-016 board; 20,000 series -
See page 5-9 for printed wiring board.
USB-016 BOARD
A USB REAR CONNECTOR
XX MARK:NO MOUNT
CN780 4P EXT
CN781 5P JL780 JL781
5 4 3
GND VBUS DD+ GND MB-127 BOARD (6/14) CN602 (SEE PAGE 4-13)
1 2 3 05 4 C781 47p VDR780 XX JL782
2 1
4-22
BDP-S560
4-23. USB-017 BOARD (USB FRONT CONNECTOR) SCHEMATIC DIAGRAM

See page 5-10 for printed wiring board.
USB-017 BOARD
A USB FRONT CONNECTOR
XX MARK:NO MOUNT
CN790 4P CN791 5P JL790
JL791 1 2 3 05 4 C791 47p VDR790 XX JL792
1 2 3 4 5
GND VBUS DD+ GND HU-012 BOARD CN104 (SEE PAGE 4-7)
4-23
BDP-S560
4-24. WAVEFORMS
MB-127 BOARD
IC808 3 (SCIN)
IC808 wa (PBOUT)
0.8 Vp-p
H H
1.4 Vp-p
0.5 V/DIV, 20 s/DIV
0.5 V/DIV, 20 s/DIV
IC808 8 (SYIN)
IC808 wd (YOUT)
1.0 Vp-p
H H
2.0 Vp-p 1.0 V/DIV, 20 s/DIV
0.5 V/DIV, 20 s/DIV
IC808 0 (YIN)
IC808 wh (SYOUT)
1.0 Vp-p
H H
2.0 Vp-p 1.0 V/DIV, 20 s/DIV
0.5 V/DIV, 20 s/DIV
IC808 qs (PBIN)
IC808 wk (VOUT)
0.7 Vp-p
H H
2.4 Vp-p
0.5 V/DIV, 20 s/DIV
1.0 V/DIV, 20 s/DIV
IC808 qf (PRIN)
qa
IC808 e; (SCOUT)
1.6 Vp-p 0.7 Vp-p

H H
0.5 V/DIV, 20 s/DIV
0.5 V/DIV, 20 s/DIV
IC808 ql (PROUT)
qs
IC1101 qf (REFCLK)
1.4 Vp-p
H
4.0 Vp-p 50 MHz 1.0 V/DIV, 10 ns/DIV
0.5 V/DIV, 20 s/DIV
4-24E
SECTION 5 PRINTED WIRING BOARDS

5-1.

BDP-S560
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS
: Uses unleaded solders. : Pattern from the side which enables seeing. (The other layers patterns are not indicated) Caution: Pattern face side: (SIDE B) Parts face side: (SIDE A) Parts on the pattern face side seen from the pattern face are indicated. Parts on the parts face side seen from the parts face are indicated.
Through hole is omitted. There are few cases that the part printed on diagram isnt mounted in this model. : panel designation Chip parts. Transistor
C 6 5 4 4 5 6 4 5 1 2 3
Diode
3 3
1 2 3 3 2 1 3 2 1 5 4 3
1 2
1 2
5-1
BDP-S560
5-2.
ANT-001 BOARD (ANTENNA) PRINTED WIRING BOARD
See page 2-4 for circuit boards location.

: Uses unleaded solder.
There are a few cases that the part isnt mounted in this model is printed on this diagram.
ANT-001 BOARD (SIDE A)

PAT201
ANT-001 BOARD (SIDE B)
CN201
1-878-669-
11
11
1-878-669-
B
05
B 1 1
05
ANT-001 BOARD (SIDE A) CN201 A-1
5-2
BDP-S560
5-3.
ANT-002 BOARD (ANTENNA) PRINTED WIRING BOARD

ANT-002 BOARD (SIDE A)

PAT301
ANT-002 BOARD (SIDE B)
CN301
1-878-670-
11
11
1-878-670-
B
05
B 1 1
05
ANT-002 BOARD (SIDE A) CN301 A-1
5-3
BDP-S560
5-4.
FL-194 BOARD (SWITCH) PRINTED WIRING BOARD
- Ref. No.: FL-194 board; 20,000 series -

FL-194 BOARD (SIDE A)

CN331
FL-194 BOARD (SIDE B)
A
BIA002
2 1
S331
05
1-878-309-
11
05
1-878-309-
11
FL-194 BOARD (SIDE A) CN331 A-2
5-4
BDP-S560
5-5.
FR-302 BOARD (FL DRIVER) PRINTED WIRING BOARD See page 2-4 for circuit boards location.
- Ref. No.: FR-302 board; 20,000 series : Uses unleaded solder.
FR-302 BOARD (SIDE A)

D709 D708
D708, 709 (BLU-RAY DISC INDICATOR)
FR-302 BOARD (SIDE A) CN701 D703 D704 D705 D706 D707 D709 D710 A-5 B-5 B-5 B-5 B-5 B-5 A-1 A-4 B-2 B-6 A-5 A-5 B-4 B-4 A-5 A-1 A-1 A-4
17 R723 R717 R716 R715 C714 C716 12 11 1 44 C715 R706 C707
CN701
A
B E B E
Q708
B E B E
E B
WLAN
B E B E
22 23 C717
05
D707
R714
C713
34 33 C718
Q706
D705
BIA001
C702
R707
1-878-308-
E B
IC702
Q707
D706
R720
D710
R725 R724
Q705 D704 D703
R718 C710
C703 C709 C711
R704
B E
Q709
Q711
C708 C704
R719
Q710
R721 C719 R712 PS701 C701 R701
IC702 Q703 Q704 Q705 Q706 Q707 Q708 Q709 Q710 Q711
Q704
R705
Q703
11
1 FR-302 BOARD (SIDE B)
7
FR-302 BOARD (SIDE B) IC701 A-4
B
JL715 JL721 JL722 JL724 JL731 JL732
JL714
JL713 JL712
JL711 C705 5 T701 10 1 C712 L701
JL710 JL716 JL723 JL725 JL727 JL726 JL728 JL709 JL707JL705 JL708 JL719 JL706 JL704 JL703 JL720 ND701
JL702 JL701
x
S702
B
S704
JL730 JL729
IC701
S701 32 31 29 4 2 1 3 1 2
Z
1-878-308-
11
05
3
5-5
BDP-S560
5-6.
HU-012 BOARD (USB HUB) PRINTED WIRING BOARD See page 2-4 for circuit boards location.
- Ref. No.: HU-012 board; 20,000 series - : Uses unleaded solder.
HU-012 BOARD (SIDE A)

C111 R150 R149 C142 R148 R116 5 C110
1 C112 R159 C101 R111 C146 R143 CN102 R147 R103
HU-012 BOARD (SIDE A) CN102 CN103 CN104 D106 D107 D109 D110 D111 IC102 IC103 A-1 B-4 B-5 B-5 B-5 A-2 B-3 B-2 B-3 B-2
IC105
D109
R122 C143 R118 C108 R109 R145 C141 R152 C102 R113 C106 R108
R151 C103
R101
R161
37
R120 C118 R123
CN104
D104
R160 BIA001
C138
C144 C140 FB101 R105 R154 R114 12 11 CN101 1
C147
C133
C 1 2 3
C128 C132 L101 C134 R158 R132 1 13 3 1 R164 2 CN105 14 R155 4 5 R131 C148 R163 JL104 IC106 5 4 IC108 1 3 R133 R102 1-878-312-
C115 C116
R119 R124 L104 L103
L102 R162
D105
C137
C123 D106 D107 C125 C136 C135
C129
C109
C130
C104
C107
C119
C113 C114
27 X101 C117 28
R135
R153 R144 R107 C105 C145
D111
R112
R115
D110
R110 R146
C120 R127 C139

8 5
R129 1
IC107 R136
C131
JL102 R130 IC104 C124C127 LP001 19 18 C126 10 9 JL101 R157
C122 R137 R156
IC103
IC102
CN103
R121
C121 R125 R126 R139 R128 R138
11
05
HU-012 BOARD (SIDE B)
1-878-312-
11
05
3
5-6
BDP-S560
5-7.
MB-127 BOARD (MAIN) PRINTED WIRING BOARD (SIDE A) See page 2-4 for circuit boards location.
- Ref. No.: MB-127 board; 10,000 series : Uses unleaded solder.
MB-127 BOARD (SIDE A)
HDMI OUT
CN702 1 19 R710
1 3
R720 C702 C701

6 4
C862 R8045 R8040 R809 R8051 R810 R811 R8030 R8043 R8032 R8039 R8037
D702 D703 D704 D705 D706 D707 D708 D709 D710 D711 D712
Q816
C705
D811
R8056
B E
L705
L706
L707
C860
R639 C619
R884 PS802
D803
L804
IC805
C832
R891
R8015 R894
B
1
R851 R888 B E
R876
1 C1402
C319 R889 C316
Q809C837 R843
4 3
C851 R855
R873
IC808
L609
D604
CN1403
Q807 E
Q805 5 1
R8024
C867
32
17 16
C845
D601
C614 C610
D605
FL311
D606
C618
R8035
IC809
C623
FB1101
C1106 C1107 C1108
R857 R881 R879
C829
R8025
R883
R8038
R874 C827
PS803
C831
C1110 C1109
CN801 5
D806 PS804
D810 R8054D808
R8055 8 CN802
L708
Q801
B E R817 R818 C804 R826 C816
R8031 R8029 R861 C822 C852
R737 FB701 R740 FB704 R741 FB705 R738 FB702 R739 FB703
HA100
C817 C818
R862
D804D807
R8033
D809
R803
R8036
R8052
IC701
R977 R961 R962 R963 RB510 7 1
CN902 1
R804 R801 R831R854 C801R802 C815
D805
D801
R8053
R834
C703 R705
R8034 C861 C850
D713 D701 D607

R638
R704
Q702
R733 R734 1 CN602 5
R1101 FB1103
R882 C869 R870 3 2 R815
C1101
C617
C622 R630
S501 R1110 8 2 R1113 RB520 RB519 C511
R8023
C346 C345 FL303 FL308 FL307
1 2
CN903
23 24
C904 R917 R918 C903 R912 R919
IC1401
R1402
R8012 R871 C901 IC901 C902 4 R914 R915 5 1 R916 8
R8027
C313 C311
C833 L803 C315 5 1 R301 IC304 C308
1 C859 C853
R850 R837
C834
1 CN601 5 C621 L605 C620
R8028
D603
C810
D602
D1101
R1136 48 25 CN501 70 1
R631 R632 R610 R611 R605 R604 R602 R601 C607 R609 R608 C608 PT002 RB513 C741 C743 R716 L607 L608 C742 R715 C744 R717 RB511 R526 R550 RB514 RB504 R565 R507 L603 L604 R524 RB512 X601 R554
R1405
Q1408
C361
R945 R946 R943
R1410 C1401
R1403 R1404 L304
R944
PT006
RB905
IC502
RB506 RB501 RB521 RB522 RB509 C278 C258 C174 1 R517 24 36 35 R925 R519C514 R515 FB201 C348 R309 FB101 3 C309 C301 4 C238 5 1 C305 C261 IC307 C259
FB401 C443 RB906
R714 R819 R820 R823
1 2 CN1302
C350 C351
L301 C312 C314
R377 R378
1 3 6 4
RB7011 C317 C320 RB7010 RB7008
RB901
R822 R824
RB503
GND2
C1305 R1303 R1305
CN1301
C1314 C1310
C1311
C1312
R1266
C1321
RB1317
C1361 R1362 C1370
FB1311 FB1321
C1326 FB1326
C1316 C4160 45 44 C4162 CN4201
FB1296 FB1297 C1297 C1295 FB1292 C1292 FB1291
IC303 R367 RB7012 PT004 R4103 R1355 R1358 C347 R4104 C1359 R1354 R747 5 4 C1350 R4109 R1359 R1356 8 1 R748 RB1258 RB1256 RB1257 C1353 PT003 8 C4295 C1309 RB1259 C1206 R1262 FB1310 R1263 R1260 R1261 RB1253 C712 C1352 FB1314 C1302 1 RB1255 RB1254 RB1252 RB1251 C1369 C1315 R1308 CN1220 RB1322 R1309 C1332 C1327 C1331 C1329 RB1328 C1328 R1334 C4166 C1296 SL4254 CN1235 C1298 R1208 C1291 FB1298 R1234
C1351 C1357 R1352 R1357 C1205 R1258 C1204 R1259 C1356 C1221 C711 R707 R709 R4110 R1310 R1221 C4168 R1293 C1215 FB1287 R1231 R7009 R7008 R7003 R7002 C1233 C1293 C1282 FB1282 R1246 1 R339 R355 R353 C340
R4101
IC1351 C307
RB7013
R948 R816
RB508
R4102
FL309
RB904 RB902
RB505 RB507R504
R528
R217 R218
IC101
IC202 IC204 IC206

RB204 RB202
PIA001
MB-127 BOARD (SIDE A) CN301 CN302 CN601 CN602 CN702 CN801 CN902 CN1402 CN1403 CN1404 CN4201 D307 D308 D601 D602 D603 D604 D605 D803 D806 D807 D808 D809 D810 D811 IC304 IC805 IC808 IC1351 IC1401 F-2 F-3 B-5 A-5 A-4 A-1 A-6 E-6 B-1 F-4 E-1 F-3 F-3 B-4 B-5 B-5 B-5 B-4 B-3 A-2 A-3 A-2 A-3 A-2 A-4 B-2 B-2 B-3 D-2 B-1 F-3 F-3 F-3 A-4 A-1 B-2 B-1 C-1
C272
C260 R219 R220
IC203 IC205 IC207

C276 C256 C262
S1401
X1201 R7041 R7043
C413 R404 R405 C411 R115 X401 R409 R4105 C155 C135
R116
R118
R117
PT001 C159 C153 FL305 FL304 C158 C362 R1485 R1486 R1487 C322 C323 C364 C366 FB302
7 CN1402 1 FL310 SIA001
R4218 R4217 C4247 C4245 MGND1 C4246
PT005
C1289 L1287 C1287
R1285
C1286 R1287 R1289
C1285
5 8 4 1
R7020 RB7002 RB7004 R7014 R7018 50
R7021
18 17
RB7001 RB7003 C7001 R7019 CN7001
C157
C1288 C1281 IC1280 C1261 R4107 GND1 FB1261 C1265
IC102 IC104 IC106

RB102 RB104
IC103 IC105 IC107 Q1409

R1449
R4106 C337 R333 C156
SL4261
CN1404 15 CN301 1 4 CN302 1 17 16
X1402 CBA
C4164 CN4262 12
C1407 2 1
R1432
FB1271 C1271 C1267 C1279 PS304 FB1272 PS301 C395 C392 FB1265
D308
C378
R4108 PS303
C376
C379 R376
R375
Q309
Q305
D307
R304 C325
R1472 R1401 R1483 R1482
R4201 R4202
C1273
FB1273
C1272
R369 B E R370
Q306
L303
R1480 R1466 R1435 R1431 R1416 R1415 R1411
CN4261 TH1401
C1417 C1416 C1415 C171 C1414 RB1402 R1456 RB1401 R1465 CN1401 C1413 R1450 C1418 4 1 R1442 R1462 IC1404 2 3 R1439 C1420 5 4 2 1 C1419 C1404 C1403 R1409 R1484 R1407 X1401 R1427 R1413 C1409 R1408 R1488 1 2 14 2 IC1402 13 CN1405 1 3 4 C160
L302
HA101
1-877-084-
21
05
3
5-7
Q305 Q306 Q309 Q702 Q801 Q805 Q809 Q1408
BDP-S560
5-8.
MB-127 BOARD (MAIN) PRINTED WIRING BOARD (SIDE B) See page 2-4 for circuit boards location.
- Ref. No.: MB-127 board; 10,000 series : Uses unleaded solder.

J801
LINE OUT (VIDEO/AUDIO) COMPONENT VIDEO OUT (PR/PB/Y) DIGITAL OUT (COAXIAL)
IC801
MB-127 BOARD (SIDE B)

R896 C838 CN1101
DIGITAL OUT (OPTICAL)
LAN (100)
R858 R724 C747 R730 R729 1 2 R512 R509 R510 R511 R521 R1105 R1106 C757 C709 7 8
5 4 1 3
R897
R8007 C841
R8022 R8010
R860 R859 I VCC
R8021 C848
Q701
R725
C758
51
R742
R728 C760
43
R864 R865 R866 R867 R845 R846 R847 R812 R835 R813 R8018 B E R814 R840 R839
Q810 R887
R838 R880 R8016
C611
L801
D1104 D1103 D1105 D1102 R1107 R513 R1103 L1102 C1103 L1101 R514 R1108 R1102 FB1102 R1111 R522 C1105 C1102 R1115 R1104 C1104 C1118 R1118 1 36 2827 C1117 R1119 IC1101 C1111 RB515 RB517 C1112 C1113 9 10 1819 R1122 R520 C1115 RB518 RB516 C1114 48 25 C1116 R1128 C513 X1101
R618
C612
R551 R557 R563 R556 R525 R508 R506 R560 R559 R561 R553 R562 R626 R558
R1418 R1417
R1414
05
C1410 R1467 R1475 R1476 R1477 R1478 R1479 R1481
R4214
R978 1 C406 C437 C408 RB7014 C401 RB7007 R929 D301 R1140 C440 R926 R1142 FL401 4 R555 R701 C415 R910 R934 R904 1 24 R566 Q302 R935 C205 R564 R936 R903 R368 R931 1 R501 R937 FB301 R206 R947 R806 L602 C206 R746 R745 R201 R502 8 R933 C441 R909 R505 R807 C201 C762 C738 R603 FL201 R527 C739 C604 R902 R939 R805 R808 C101 RB502 C740 C606 C422 5 FL101 C803 R938 C605 R1139 R101 RB7015 C516 R821 R932 C624 R1137 C264 R4121 Q301 C414 C273 C812 C806 R911 C420 R1138 C811 C805 R949 C231C230 C263 C213 R942 R606 R713 R825 C226 C217 C407 C434 C266 C424 C225 R960 R4124 R4123 C228 C421 R408 R607 C1268 R4122 R223 C227 C1259 C807 C802 C442 C431 C419 R941 R4125 C1258 C1257 C232 C234 C423 R940 C428 R379 C1354 C265 C416 C725 RB903 C236 C212 R381 54 C223 28 C214 R210 C237 C436 C905 C430 C224 C209 C1355 R380 C220 R750 R953 C1224 C432 4 1 R211 C404 C218 C219 R751 C427 C731 C222 IC1352 C207 C1388 C409 RB1220 C426 R209 IC1251 C267 5 6 C1387 C4285 C221 R204 C1251 RB201 C1395 C202 R208 1 5 C1220 FB1251 C215 R1256 C425 3 4 R4132 C203 RB205 R1311 C4265 C211 1 27 R205 C1385 C4287 IC1220 C216 C429 R4131 RB203 R1301 C1252 R212 C4294 C210 C204 C268 C1378 R213 C1255 C1253 C1264 C1256 C241 C250 C251 C1384 R1302 C1263 C1254 C246 C254 R407 C1382 C102 R227 C252 C275 C208 C108 C1203 C106 C105 C4286 C103 R1210 C111 C242 C107 C112 C255 EP1301 C4293 R107 R1209 C1335 C104 C244 C1208 R1235 C4263 C1209 C243 C270 C435 C4272 R1236 C113 R402 R1232 C245 C253 C1210 R1335 R103 C1377 C277 C4283 C4266 C249 C4273 C109 C248 R104 C247 C4276 C4161 C1394 C1393 C1231 PIB001 C1223 C4151 C170 C114 C271 FB1393 C4282 C4167 R403 R1223 C269 EP1345 C274 FB1301 R1212 R401 C1376 R4249 R4255 C161 C1222 C173 C375 R4129 C321 R1247 R4248 C4152 R1248 R1243 IC1245 R4251 R1242 C172 C138 R4258 5 4 R1244 R4259 C151 C121 C1372 C169 R1245 C4253 C131 C4169 C4201 C4163 R1250 C1389 C147 C139 R342 1 C126 C120 C122 54 R4252 1 8 C125 C143 C4203 C146 C162 C4252 C152 C123 C150 R341 C374 R1241 C130 C4205 C1245 C148 C133 C132 C127 C4250 C141 C304 C124 D304 C137RB105 R1284 C119 R4208 R7001 C140 R122 R121 R126 R125 R7016 C4209 R326 R330 C154 RB101 RB103 C128 C136 C167 IC4201 R4130 R7010 R124 R332 R128 R349 5 4 R123 C145 RB7009 R7017 R127 R109 C129 C149 R4219 R4238 C164 C1266 R108 C358 R335 C1262 C134 Q303 8 1 R373 C4235 R4128 C168 R110 R111 R4222 R4235 FB1262 8 FB1266 14 R4126 C163 C369 IC311 C398 R1459 C166 IC310 C344 R4225 1 8 C399 C165 5 4 R356 R4234 R331 C336 C335 7 R1464 FB1260 R4223 R319 1 Q304 27 28 R364 33 48 R1443 R329 R338 R4206 4 5 FB1270 R4224 R334 R374C352 C4230 8 1 C349 R363 R1445 C338 R325 R1446 R4209 R4212 C4226 49 32 D302 R345 C4228 R1448 IC301 C326 C4165 R1438 C4227 C329 3 1 R321 R1430 FB4225 R1441 R1271 C330 R305 RB1403 C327 4 5 R1272 Q308 IC1403 4 5 C328 R1422 1 3 C4220 C324 R1424 C1411 C4222 SIB001 R4127 C1412 64 17 C4223 R1406 IC302 C4224 R1420 1 16 R1421 R1419 C1408 HB101 R1412 R1141 C907 C906 C909 C438 R924 R928 R927 FB601 C601 R711 R712 C908 C343 R503 C418 C517 R523 R518 R516 C229 C235 R752 R635 C814 C417 C603 R703 C722 C713 R930 C239 R224 R922 C405 R921 C716 C233 C433 R207 R203 C403 C410C704 R225 R226 R706 R708 R1237 C4274 C1386 C4284 C4264 C4262 C110 C402 C1371 C4268 C1375 C1374 C1301 FB4284 C1303 C118 R106 C117 C115 R105 C116 R1211 C4292 R229 R230 C257 R228 C240 R7040 R7042 R7037 R7036 R7039 C144 C142 C4207 C341 R7004 R7006 R7005 C4225 C4244 C4221 C4237 R4232 R4231 R4229 R4228 C318 R352 R365 C342 R317 R4233 R4230 R4243 R4244 R313 R311 R307 C333 C332 R306 C331
R923
R308
IC501
C609 B E R614 C613 R616 R893 C625 C835 R727 C751 C809 R622 R726 R832 R868 R625 R623 IC702 4 3 R844 8 5 1 5 L606 C749 51 C819 FL701 IC802 IC602 R621 3 4 C821 FB706 C820 1 4 R640 C615 C732 R303 R828 R620 R624 C377 R827 X602 C602 4 3 IC308 C353 C306 L601 C1119 51 C302 R636 R302 R637 C706 FB303 C303 C824 R721 C708 R842 R877 C748 R833 R829 R830 R718 R719
R702
R619
R615
IC704
Q806
R732 R731 R723 C707 R722
IC601
1 5
R8046
E
R886
C839 C847
IC703 IC705
Q811
R617 C759 R743
Q812
R885 R895 C868
R1135 R1123 R1134 R1133 R1124 R1132 R1131 R1130 R1129
HB001 KB001 C858 R849 C844 R8020 R848 R8019 3 KB004 C830 5 4 R8044 R899 C842 R898 R8042 IC806 1 C843 R8011 R8041 C828 R8008 C849 2 C813 C826 D802 Q815 C846 C865 R878 R8005 R8014 C864 IC804 9 16 Q808 Q813 C855 Q818 C840 E B C808 R852 C856 R863 R853 R890 R8009 8 1 R875 Q804 E B R872 R856 Q814 R8017 R869 R8026 C836 R836 R892 R841 R8006 R8013
IC807
HB100
Q803
C396 R372
C854
R8004 R954 5 C397 R318 R315 8 C339 C334 R322 R320 1 7 R314 IC309 R371 5 14 8 C355 C357 R310 8 R327 R323 R328 R324 1 C310 R357 R312 4 Q307 R316
D303
Q300
4
D
MB-127 BOARD (SIDE B) CN1101 D301 D303 D304 D802 IC301 IC601 IC703 IC704 IC705 IC802 IC804 IC806 IC807 IC1101 IC1403 Q301 Q302 Q303 Q304 Q307 Q308 Q806 Q812 Q813 Q818 A-5 C-1 B-1 E-6 B-3 F-3 A-4 A-4 B-4 A-5 B-3 B-3 B-2 A-3 B-5 F-5 C-1 C-1 E-6 F-6 C-1 F-6 B-3 B-3 B-2 B-2
F
21
1-877-084-
4
5-8
BDP-S560
5-9.
USB-016 BOARD (USB REAR CONNECTOR) PRINTED WIRING BOARD

USB-016 BOARD (SIDE A)
USB-016 BOARD (SIDE B)

CN780
VDR780
BIA003
C781
5 CN781 1
1-878-310-
5 JL781
1 JL780 4
EXT
6 JL782
1-878-310-
A
11
11
05
05
1
USB-016 BOARD (SIDE B) CN780 A-1
5-9
BDP-S560
5-10. USB-017 BOARD (USB FRONT CONNECTOR) PRINTED WIRING BOARD


USB-017 BOARD (SIDE A)

BIA004
USB-017 BOARD (SIDE B)
C791
VDR790
JL792
JL791 1 CN791 5
JL790
4
1-878-311-
B 1
05
1-878-311-
11
05
CN790
11
1
USB-017 BOARD (SIDE B) CN790 CN791 B-2 A-1
5-10E
SECTION 6 IC PIN FUNCTION DESCRIPTION

6-1.
Pin No. A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 A31 A32 A33 A34 A35 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 Name VOID VOID VOID RFN2 RFP2 RFN RFP AGND E F D A CAGC1 CAGC2 ADIN0/RFP7 MON1/RFP4 RFEQOP SAGNDANA SACREFN SAGNDDIG SATXN0 SAGNDDIG SARXP0 SAGNDDIG GND GPIO35 GND GPIO43 GND N.U. GND N.U. VOID VOID VOID VOID VOID AGND AGND AVDD33 CREG VREFIO RFTSTIN1 G/FOP H/FOM B C CEQ REQ ADIN1 MON2/RFP5 RFEQOM SAVDDANA SACREFP SAGNDDIG SATXP0 SAGNDDIG SARXN0 SAGNDDIG I/O I I I I I I I I I/O I/O I I/O O I O I I/O I/O I I O I/O I I I I I I/O I/O I I/O O I O I Description This pin is not ball. This pin is not ball. This pin is not ball. RF I/F RF differential signal (-) Input RF I/F RF differential signal (+) Input RF I/F RF differential signal (-) Input RF I/F RF differential signal (+) Input Analog GND for Drive Controller Block RF I/F Main Beam Signal (E) Input RF I/F Main Beam Signal (F) Input RF I/F Main Beam Signal (D) Input RF I/F Main Beam Signal (A) Input RF I/F Connection to condenser for AGC detector (normal) RF I/F Connection to condenser for AGC detector (for CAPA) RF I/F A/D Input/GPIO 7 RF I/F Internal Signal Monitor, Monitor Input Signal/GPIO 4 RF I/F RFEQ (+) Output (for monitor) Analog ground for Serial ATA Serial ATA Reference Clock Negative Input Digital ground for Serial ATA Serial ATA Serial Transmit Data0 Digital ground for Serial ATA Serial ATA Serial Receive Data0 Digital ground for Serial ATA Ground for digital and DDR2 SDRAM Horizontal Sync Signal/Composite Sync Signal Ground for digital and DDR2 SDRAM VODY6: Digital Video Y Data Output Ground for digital and DDR2 SDRAM Not used (Fixed at "L") Ground for digital and DDR2 SDRAM Not used (Fixed at "H") This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. Analog GND for Drive Controller Block Analog GND for Drive Controller Block Analog 3.3V supply for Drive Controller Block RF I/F Regulator Voltage Output (1.65V) RF I/F Reference Voltage Input/Output for pickup RF I/F RF Test Input RF I/F Main Beam Signal (G) Input/FO (+) Input for focusing RF I/F Main Beam Signal (H) Input/FO (-) Input for focusing RF I/F Main Beam Signal (B) Input RF I/F Main Beam Signal (C) Input RF I/F Connection to condenser for RF EQ fc control circuit RF I/F Connection to resistor for setting RF EQ circuit current RF I/F A/D Input RF I/F Internal Signal Monitor, Monitor Input Signal/GPIO 5 RF I/F RFEQ (-) Output (for monitor) 1.8V supply (Serial ATA analog VDD) Serial ATA Reference Clock Positive Input Digital ground for Serial ATA Serial ATA Serial Transmit Data0 Digital ground for Serial ATA Serial ATA Serial Receive Data0 Digital ground for Serial ATA
BDP-S560
MAIN SYSTEM CONTROL PIN FUNCTION (MB-127 BOARD IC101: MC-10121F1-207-TA1-A)
6-1
BDP-S560
Pin No. B25 B26 B27 B28 B29 B30 B31 B32 B33 B34 B35 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 C21 C22 C23 C24 C25 C26 C27 C28 C29 C30 C31 C32 C33 C34 C35 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15
Name GPIO40 GPIO42 GPIO45 GPIO46 N.U. N.U. N.U. N.U. S2CSB VOID VOID VOID SDRV2 AVDD33 FPDVINP2 FPDVINP AGND AGND AVDD15 AVDD33 AVDD15 AGND VDD15RVAD AVDD15 AGND MON3/RFP6 MA4 DVDD33 DGND SAGNDDIG SAGNDDIG SAGNDDIG SAGNDDIG SAGNDDIG GPIO41 GPIO50 GPIO51 VDD3 GND VDD3 ATX VDD3 S2CKIN S2DOUT S2DIN VOID MDRV SDRV1 DAOUT2 FPDVINN2 FPDVINN CBC RFTSTIN2 REF16 RFOP RFTST3/RFP3 DGND PB0/SW1 PB1/SW2 MA1 MA6
I/O I/O I/O I/O I/O I/O I O I I O I I I/O O I/O I/O I/O O I O I O O O I I I/O I O O O I/O I/O O O
Description VODY3: Digital Video Y Data Output VODY5: Digital Video Y Data Output VODY8: Digital Video Y Data Output VODY9: Digital Video Y Data Output Not used Not used (Fixed at "H") Not used Not used (Fixed at "H") Clocked Serial I/F 2 Slave Select Input This pin is not ball. This pin is not ball. This pin is not ball. Motor Drive I/F Thread Drive Output Analog 3.3V supply for Drive Controller Block RF I/F Front Monitor Input (+) RF I/F Front Monitor Input (+) Analog GND for Drive Controller Block Analog GND for Drive Controller Block Analog 1.5V supply for Drive Controller Block Analog 3.3V supply for Drive Controller Block Analog 1.5V supply for Drive Controller Block Analog GND for Drive Controller Block Power Supply 1.5V for RV ADC Analog 1.5V supply for Drive Controller Block Analog GND for Drive Controller Block RF I/F Internal Signal Monitor, Monitor Input Signal/GPIO 6 External SDRAM I/F Memory Address Output Digital 3.3V supply for Drive Controller Block) Digital GND for Drive Controller Block Digital ground for Serial ATA Digital ground for Serial ATA Digital ground for Serial ATA Digital ground for Serial ATA Digital ground for Serial ATA VODY4: Digital Video Y Data Output VODC3: Digital Video Cb/Cr Data Output VODC4: Digital Video Cb/Cr Data Output 3.3V supply (I/O buffers) Ground for digital and DDR2 SDRAM 3.3V supply (I/O buffers) Sample data output for S/PDIF, HDMI 3.3V supply (I/O buffers) Clocked Serial I/F 2 Serial Clock Input Clocked Serial I/F 2 Serial Data Output Clocked Serial I/F 2 Serial Data Input This pin is not ball. Motor Drive I/F Spindle Drive Output Motor Drive I/F Thread Drive Output RF I/F General-purpose D/A Converter Output RF I/F Front Monitor Input (-) RF I/F Front Monitor Input (-) RF I/F Connector to condenser for setting WOBBLE circuit (A+D) signal AGC response speed RF I/F RF Test Input RF I/F System Reference Voltage Output (for 3.3V supply) RF I/F Read RF Output (+) RF I/F RF Test/GPIO 3 Digital GND for Drive Controller Block General Port I/F, Three values Control Output SW (default) General Port I/F, Three values Control Output SW (default) External SDRAM I/F Memory Address Output External SDRAM I/F Memory Address Output
6-2
BDP-S560
Pin No. D16 D17 D18 D19 D20 D21 D22 D23 D24 D25 D26 D27 D28 D29 D30 D31 D32 D33 D34 D35 E1 E2 E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 E13 E14 E15 E16 E17 E18 E19 E20 E21 E22 E23 E24 E25 E26 E27 E28 E29 E30 E31 E32 E33 E34 E35 F1 F2 F3 F4 F5 F6
Name MA0 MA2 MA3 GND SAVDDDIG SAVDDTIO GPIO34 GPIO37 GPIO49 GPIO53 GND AO0BD3 AO0BD0 GND AO0MCK GND N.U. S0DIN S0DOUT S0CKOUT FDRV DAOUT0 DAOUT1 VDD15WBLAD GND_WBLAD CWAGC CAD REF075 RFON AGCINP DVDD33 PB3/SW4 PB2/SW3 MA7 MA10 MA8 MA5 GPIO7 N.U. SAVDDDIG SAVDDTIO GPIO38 GPIO47 GPIO54 GND AO0BD1 AO0LRCK AO1BD AO1BCK GPIO10 N.U. GND GND VDD3 GND TDRV AVDD15 AVDD15 AGND AGND AVDD33
I/O O O O I/O I/O I/O I/O O O O I I O O O O O I/O I/O O O I I/O I/O O O O O O I/O I/O I/O I/O O O O O I/O I/O O -
Description External SDRAM I/F Memory Address Output External SDRAM I/F Memory Address Output External SDRAM I/F Memory Address Output Ground for digital and DDR2 SDRAM 1.05V supply 1.8V supply (Serial ATA Tx I/O) Video Pixel Clock VODY0: Digital Video Y Data Output VODC2: Digital Video Cb/Cr Data Output VODC6: Digital Video Cb/Cr Data Output Ground for digital and DDR2 SDRAM Audio PCM Serial Data Output Audio PCM Serial Data-L/R Output/Down Mixed Output Ground for digital and DDR2 SDRAM Audio Master Clock Output Ground for digital and DDR2 SDRAM Not used Not used Clocked Serial I/F 0 Serial Data Output Clocked Serial I/F 0 Serial Clock Output Motor Drive I/F Focus Drive Output RF I/F General-purpose D/A Converter Output RF I/F General-purpose D/A Converter Output Power Supply 1.5V for WOBBLE ADC Ground for WOBBLE ADC RF I/F Connection to condenser for setting WOBBLE circuit AGC response speed RF I/F Connection to condenser for setting WOBBLE circuit (A+D) signal AGC response speed RF I/F System Reference Voltage Output (for 1.5V supply) RF I/F Read RF Output (-) RF I/F AGC Input (+) Digital 3.3V supply for Drive Controller Block) General Port I/F, Three values Control Output SW (default) General Port I/F, Three values Control Output SW (default) External SDRAM I/F Memory Address Output External SDRAM I/F Memory Address Output External SDRAM I/F Memory Address Output External SDRAM I/F Memory Address Output GPIO7 Not used 1.05V supply 1.8V supply (Serial ATA Tx I/O) VODY1: Digital Video Y Data Output VODC0: Digital Video Cb/Cr Data Output VODC7: Digital Video Cb/Cr Data Output Ground for digital and DDR2 SDRAM Audio PCM Serial Data-SL/SR Output Audio L/R Clock Output Audio PCM Serial Data-L/R Output/Down Mixed Output Audio Data Clock Output FORMAT0 (480, 1080="0" 720="1") Not used Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM 3.3V supply (I/O buffers) Ground for digital and DDR2 SDRAM Motor Drive I/F Tracking Drive Output Analog 1.5V supply for Drive Controller Block Analog 1.5V supply for Drive Controller Block Analog GND for Drive Controller Block Analog GND for Drive Controller Block Analog 3.3V supply for Drive Controller Block
6-3
BDP-S560
Pin No. F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 F17 F18 F19 F20 F21 F22 F23 F24 F25 F26 F27 F28 F29 F30 F31 F32 F33 F34 F35 G1 G2 G3 G4 G5 G6 G7 G8 G9 G10 G11 G12 G13 G14 G15 G16 G17 G18 G19 G20 G21 G22 G23 G24 G25 G26 G27 G28 G29 G30 G31
Name RLD CBCO CBHWBL/CID AGCINN DGND MBA1 MA9 MBA0 MA11 MD8 MD11 GPIO6 N.U. SAVDDDIG SAVDDTIO GPIO39 GPIO48 GPIO56 NMI AO0BD2 AO1LRCK GND GPIO15 GPIO57 UA0RXDB GND VAY GND VAB DVDD33 SDCK SDCS1B SDCS3B PA2 PA0 AVDD33 RFTST1/SWRF1/RFP1 CADO CBHLPP DVDD15 CASB MCKE RASB MD9 MD4 MD3 N.U. SAVDDDIG SAVDDTIO GPIO36 GPIO44 GPIO52 GPIO55 VDD3 AO0BCK AO1MCK GPIO14 GPIO12 UA0TXDB SCL1
I/O O I/O I/O I O O O O I/O I/O I/O I/O I/O I/O I/O I O O O O I O O O O I/O I/O I/O O I/O I/O O O O I/O I/O I/O I/O I/O I/O I/O I/O O O I/O I/O O I/O
Description RF I/F Laser Driver Control for Read RF I/F Connection to condenser for WOBBLE circuit (A+D) HPF RF I/F Connection to condenser for LPP circuit bottom hold (WOBBLE level) and ID detection circuit LPF RF I/F AGC Input (-) Digital GND for Drive Controller Block External SDRAM I/F Memory Bank Address Output External SDRAM I/F Memory Address Output External SDRAM I/F Memory Bank Address Output External SDRAM I/F Memory Address Output External SDRAM I/F Memory Data Input/Output External SDRAM I/F Memory Data Input/Output GPIO6 Not used 1.05V supply 1.8V supply (Serial ATA Tx I/O) VODY2: Digital Video Y Data Output VODC1: Digital Video Cb/Cr Data Output VODC9: Digital Video Cb/Cr Data Output Not used (Fixed at "H") Audio PCM Serial Data-C/LE Output Audio L/R Clock Output Ground for digital and DDR2 SDRAM IT_GPIO1 USB VBUS PCONT ("H": ON, "L": OFF) UART 0 Receive Data Ground for digital and DDR2 SDRAM S-Video Y or Composite CVBS Signal Output Ground for digital and DDR2 SDRAM Component Output either B or Pb Signal Digital 3.3V supply for Drive Controller Block) General Serial I/F Clock Signal General Serial I/F Channel #1 Select Signal General Serial I/F Channel #3 Select Signal General Port I/F General Port I/F Analog 3.3V supply for Drive Controller Block RF I/F RF Test Output/SWRF1 Output/GPIO 1 RF I/F Connection to condenser for WOBBLE circuit (B+C) HPF RF I/F For LPP circuit bottom hold (LPP) Digital 1.5V supply for Drive Controller Block External SDRAM I/F Memory Column Address Strobe External SDRAM I/F SDRAM Clock Enable External SDRAM I/F Memory Row Address Strobe External SDRAM I/F Memory Data Input/Output External SDRAM I/F Memory Data Input/Output External SDRAM I/F Memory Data Input/Output Not used 1.05V supply 1.8V supply (Serial ATA Tx I/O) Vertical Sync Signal/Blanking Sync Signal VODY7: Digital Video Y Data Output VODC5: Digital Video Cb/Cr Data Output VODC8: Digital Video Cb/Cr Data Output 3.3V supply (I/O buffers) Audio Data Clock Output Audio Master Clock Output IP (Progressive="0" Interlace="1") (Not used) ASPECT0 (4:3="0" 16:9, 4:3LB="1") UART 0 Transfer Data I2C I/F 1 Serial Clock
6-4
BDP-S560
Pin No. G32 G33 G34 G35 H1 H2 H3 H4 H5 H6 H7 H8 H9 H10 H11 H12 H13 H14 H15 H16 H17 H18 H19 H20 H21 H22 H23 H24 H25 H26 H27 H28 H29 H30 H31 H32 H33 H34 H35 J1 J2 J3 J4 J5 J6 J7 J8 J9 J10 J11 J12 J13 J14 J15 J16 J17 J18 J19 J20 J21 J22
Name VDD3 GND VAR GND DGND DVDD15 SDIO SDCS0B SDCS2B PA3 PA1 WALPF1 RFTST2/SWRF2/RFP2 CWHP MD12 WEB MCLKOUT MD7 MD6 GPIO20 N.U. SAGNDDIG SAGNDDIG PVDD PGND RSTSWB TMODE4 TEST TMODE1 TMODE0 TMODE2 GPIO13 GPIO58 SDA1 SDA0 GND VAC GND VAG X2 SFSIO2 SFSIO3 PC0 PA7 PA6 PA4 MD15 MD1 MD2 MD13 LDQM UDQM MD5 MD10 GPIO5 GPIO2 SAGNDDIG VDD3 PVDD PGND VDD3
I/O O I/O O I/O I/O I/O I/O O I/O I/O O O I/O I/O I I/O I I I I I I I/O O I/O I/O O O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I O -
Description 3.3V supply (I/O buffers) Ground for digital and DDR2 SDRAM Component Output either R or Pr Signal Ground for digital and DDR2 SDRAM Digital GND for Drive Controller Block Digital 1.5V supply for Drive Controller Block General Serial I/F Input/Output Data General Serial I/F Channel #0 Select Signal General Serial I/F Channel #2 Select Signal General Port I/F General Port I/F Connection to condenser for WAPLL RF I/F RF Test Output/SWRF2 Output/GPIO 2 RF I/F Connection to condenser for WOBBLE circuit HPF External SDRAM I/F Memory Data Input/Output External SDRAM I/F Memory Write Enable External SDRAM I/F SDRAM Clock Output External SDRAM I/F Memory Data Input/Output External SDRAM I/F Memory Data Input/Output GPIO20 Not used Digital ground for Serial ATA Digital ground for Serial ATA 1.05V supply for PLL Ground for PLL Hardware Reset (L: RESET) Not used (Fixed at "L") Not used (Fixed at "L") Not used (Fixed at "L") Not used (Fixed at "L") Not used (Fixed at "L") ASPECT1 (4:3, 16:9="0" 4:3LB="1") GPIO58 I2C I/F 1 Serial Data I2C I/F 0 Serial Data Ground for digital and DDR2 SDRAM S-Video C Signal Output Ground for digital and DDR2 SDRAM Component Output either G or Y Signal Crystal Input/Output Flash Memory I/F Serial Data Input/Output Flash Memory I/F Serial Data Input/Output General Port I/F General Port I/F General Port I/F General Port I/F External SDRAM I/F Memory Data Input/Output External SDRAM I/F Memory Data Input/Output External SDRAM I/F Memory Data Input/Output External SDRAM I/F Memory Data Input/Output External SDRAM I/F Lower Data Mask Control External SDRAM I/F Upper Data Mask Control External SDRAM I/F Memory Data Input/Output External SDRAM I/F Memory Data Input/Output Not Used (Fixed at "H") Not Used Digital ground for Serial ATA 3.3V supply (I/O buffers) 1.05V supply for PLL Ground for PLL 3.3V supply (I/O buffers)
6-5
BDP-S560
Pin No. J23 J24 J25 J26 J27 J28 J29 J30 J31 J32 J33 J34 J35 K1 K2 K3 K4 K5 K6 K7 K8 K9 K10 K11 K12 K13 K14 K15 K16 K17 K18 K19 K20 K21 K22 K23 K24 K25 K26 K27 K28 K29 K30 K31 K32 K33 K34 K35 L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13
Name GND TMODE3 TMODE5 VRVDD VRGND GPIO11 GND SCL0 GND VDD3 GND HDVSS HDVSS X1 PC1 SFCS0B SFSIO0 PB4 DVDD15 PTEST28 PA5 MD0 VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VDD10 VDD10 GND GND VDD3 VACOMPYC HDVSS HTXP2 HTXN2 DGND PC2 SFSIO1 SFSCK DVDD15 DGND PTEST17 PB5 MD14 VOID VOID VOID VOID
I/O I I I/O I/O I I/O O I/O I/O O I/O I/O O O I/O I/O O I/O I/O I/O -
Description Ground for digital and DDR2 SDRAM Not used (Fixed at "L") Not used (Fixed at "L") 1.05V supply for VR5500 PLL Ground for VR5500 PLL FORMAT1 (480="0" 720, 1080="1") Ground for digital and DDR2 SDRAM I2C I/F 0 Serial Clock Ground for digital and DDR2 SDRAM 3.3V supply (I/O buffers) Ground for digital and DDR2 SDRAM Analog ground for HDMI Analog ground for HDMI Crystal Input General Port I/F Flash Memory I/F Serial Memory Chip Select Flash Memory I/F Serial Data Input/Output General Port I/F Digital 1.5V supply for Drive Controller Block Test I/F (HIOCS16B) General Port I/F External SDRAM I/F Memory Data Input/Output This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. 1.05V supply (core) 1.05V supply (core) Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM 3.3V supply (I/O buffers) Compensation capacitance Analog ground for HDMI HDMI TMDS Data Output 2+ HDMI TMDS Data Output 2Digital GND for Drive Controller Block General Port I/F Flash Memory I/F Serial Data Input/Output Flash Memory I/F Serial Interface Clock Output Digital 1.5V supply for Drive Controller Block Digital GND for Drive Controller Block Test I/F (DASPB) General Port I/F External SDRAM I/F Memory Data Input/Output This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball.
6-6
BDP-S560
Pin No. L14 L15 L16 L17 L18 L19 L20 L21 L22 L23 L24 L25 L26 L27 L28 L29 L30 L31 L32 L33 L34 L35 M1 M2 M3 M4 M5 M6 M7 M8 M9 M10 M11 M12 M13 M14 M15 M16 M17 M18 M19 M20 M21 M22 M23 M24 M25 M26 M27 M28 M29 M30 M31 M32 M33 M34 M35 N1 N2 N3 N4
Name VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID GND VDD3 GND VARSETYC VAREFRGB HDVSS HDVSS HTXP1 HTXN1 CLK27OUT FG PSI5 PSI3 PSI1 DVDD33 PTEST30 DGND VDD15OSC VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VDD3 DVDDYC VAREFYC VARSETRGB GND HVDD_IO HDVSS HTXP0 HTXN0 CLK27IN P53 DVDD33 PSI4
I/O O O O I I/O I/O I/O I/O O O I I/O I/O
Description This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. Ground for digital and DDR2 SDRAM 3.3V supply (I/O buffers) Ground for digital and DDR2 SDRAM 680-ohm Resister Voltage Reference Input for DAC (1.32V) Analog ground for HDMI Analog ground for HDMI HDMI TMDS Data Output 1+ HDMI TMDS Data Output 127MHz Clock output for XTAL Motor Drive I/F FG Signal Input General Port I/F General Port I/F General Port I/F Digital 3.3V supply for Drive Controller Block) Test I/F (PDIAGB) Digital GND for Drive Controller Block Power Supply 1.5V for Oscillator This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. 3.3V supply (I/O buffers) 3.3V supply (DAC Digital VDD) Voltage Reference Input for DAC (1.32V) 470-ohm Resister Ground for digital and DDR2 SDRAM 3.3V supply (HDMI Tx I/O) Analog ground for HDMI HDMI TMDS Data Output 0+ HDMI TMDS Data Output 027MHz Clock Input General Port I/F Digital 3.3V supply for Drive Controller Block) General Port I/F
6-7
BDP-S560
Pin No. N5 N6 N7 N8 N9 N10 N11 N12 N13 N14 N15 N16 N17 N18 N19 N20 N21 N22 N23 N24 N25 N26 N27 N28 N29 N30 N31 N32 N33 N34 N35 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 P21 P22 P23 P24 P25 P26 P27 P28 P29 P30
Name PSI2 PTEST01 PTEST00 PTEST14 GNDOSC VOID VOID VOID PTEST18 PTEST27 PTEST22 VDD10 PB7 VDD10 GND VDD10 GND VDD10 VDD10 VOID VOID VOID AVDDYC AGNDYC VACOMPRGB HDVDD HDVSS HVDD_IO HDVSS HTXCP HTXCN GND P52 P56 P57 PSI6 PSI0 PTEST12 PTEST11 PTEST02 VOID VOID VOID PTEST15 PTEST19 PTEST29 VDD10 PB6 VDD10 GND VDD10 GND VDD10 VDD10 VOID VOID VOID AGNDYC AGNDRGB DVDDRGB HDVSS
I/O I/O I/O I/O I/O I O I I/O O O I/O I/O I/O I/O I/O I/O I/O I/O I/O I O I/O -
Description General Port I/F Test I/F (HDD1) Test I/F (HDD0) Test I/F (HDD14) Oscillator GND This pin is not ball. This pin is not ball. This pin is not ball. Test I/F (DIORB) Test I/F (HINTRQ) Test I/F (HDA0) 1.05V supply (core) General Port I/F 1.05V supply (core) Ground for digital and DDR2 SDRAM 1.05V supply (core) Ground for digital and DDR2 SDRAM 1.05V supply (core) 1.05V supply (core) This pin is not ball. This pin is not ball. This pin is not ball. Analog 3.3v supply for Sub Video DACs Analog ground for Sub Video DACs Compensation capacitance 1.05V supply (HDMI analog VDD) Analog ground for HDMI 3.3V supply (HDMI Tx I/O) Analog ground for HDMI HDMI TMDS Clock Output+ HDMI TMDS Clock OutputGround for digital and DDR2 SDRAM General Port I/F General Port I/F General Port I/F General Port I/F General Port I/F Test I/F (HDD12) Test I/F (HDD11) Test I/F (HDD2) This pin is not ball. This pin is not ball. This pin is not ball. Test I/F (HDD15) Test I/F (DIOWB) Test I/F (IORDY) 1.05V supply (core) General Port I/F 1.05V supply (core) Ground for digital and DDR2 SDRAM 1.05V supply (core) Ground for digital and DDR2 SDRAM 1.05V supply (core) 1.05V supply (core) This pin is not ball. This pin is not ball. This pin is not ball. Analog ground for Sub Video DACs Analog ground for Main Video DACs 3.3V supply (DAC Digital VDD) Analog ground for HDMI
6-8
BDP-S560
Pin No. P31 P32 P33 P34 P35 R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 R15 R16 R17 R18 R19 R20 R21 R22 R23 R24 R25 R26 R27 R28 R29 R30 R31 R32 R33 R34 R35 T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 T11 T12 T13 T14 T15 T16 T17 T18 T19 T20 T21
Name HDVDD HDVSS HDVSS HEXTP HEXTN XI P51 P54 P55 VDD3 P50 PTEST10 PTEST05 PTEST06 VOID VOID VOID PTEST26 PTEST25 PTEST23 PTEST21 PTEST20 GND GND GND GND GND GND VOID VOID VOID AVDDRGB AGNDRGB HDVSS HDVSS HDVDD HVDD_IO HDVDD HDVSS HDVSS XO CLKSEL GND VDD18 D0DQ9 GND VDD18 PTEST08 PTEST16 VOID VOID VOID VDD10 VDD10 PTEST03 PTEST13 PTEST24 GND GND GND GND
I/O I I I I/O I/O I/O I/O I/O I/O I/O O I I I I O I I/O I/O I I/O I/O I -
Description 1.05V supply (HDMI analog VDD) Analog ground for HDMI Analog ground for HDMI HDMI Resistance Connection Terminal for Output Amplitude Control HDMI Resistance Connection Terminal for Output Amplitude Control Crystal Input General Port I/F General Port I/F General Port I/F 3.3V supply (I/O buffers) General Port I/F Test I/F (HDD10) Test I/F (HDD5) Test I/F (HDD6) This pin is not ball. This pin is not ball. This pin is not ball. Test I/F (HDMARQ) Test I/F (HDMACKB) Test I/F (HDA1) Test I/F (HCS1B) Test I/F (HCS0B) Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM This pin is not ball. This pin is not ball. This pin is not ball. Analog 3.3v supply for Main Video DACs Analog ground for Main Video DACs Analog ground for HDMI Analog ground for HDMI 1.05V supply (HDMI analog VDD) 3.3V supply (HDMI Tx I/O) 1.05V supply (HDMI analog VDD) Analog ground for HDMI Analog ground for HDMI Crystal Output OSC27/CLK27IN Select Signal Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) DDR2 Data Input/Output Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) Test I/F (HDD8) Test I/F (HRESETB) This pin is not ball. This pin is not ball. This pin is not ball. 1.05V supply (core) 1.05V supply (core) Test I/F (HDD3) Test I/F (HDD13) Test I/F (HDA2) Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM
6-9
BDP-S560
Pin No. T22 T23 T24 T25 T26 T27 T28 T29 T30 T31 T32 T33 T34 T35 U1 U2 U3 U4 U5 U6 U7 U8 U9 U10 U11 U12 U13 U14 U15 U16 U17 U18 U19 U20 U21 U22 U23 U24 U25 U26 U27 U28 U29 U30 U31 U32 U33 U34 U35 V1 V2 V3 V4 V5 V6 V7 V8 V9 V10 V11 V12
Name VDD10 VDD10 VOID VOID VOID GND GND HDVSS HDVSS HHPD ETMDC ETMDIO ETREFCLK VDD3 GND GND D0DQ10 D0DM1 GND D0DQ11 D0DQ8 VDD18 GND VOID VOID VOID TEST1 PTEST07 PTEST09 PTEST04 GND GND GND GND GND GND GND VOID VOID VOID HDSCL HDVSS ETRXER ETRXD0 ETRXD1 VDD3 ETCRS GND GND D0DQS1 D0DQS1B GND D0DQ13 GND D0DQ12 D0DQ14 GND D0VDD10 VOID VOID VOID
I/O I O I/O I I/O I/O I/O I/O I I/O I/O I/O I/O I I I I I/O I/O I/O I/O I/O -
Description 1.05V supply (core) 1.05V supply (core) This pin is not ball. This pin is not ball. This pin is not ball. Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Analog ground for HDMI Analog ground for HDMI HDMI Hot Plug Detect Ether Management Clock Output Ether Management Data Input/Output Ether Reference Clock Input 3.3V supply (I/O buffers) Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM DDR2 Data Input/Output DDR2 Data Mask Ground for digital and DDR2 SDRAM DDR2 Data Input/Output DDR2 Data Input/Output 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM This pin is not ball. This pin is not ball. This pin is not ball. Test I/F Test I/F (HDD7) Test I/F (HDD9) Test I/F (HDD4) Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM This pin is not ball. This pin is not ball. This pin is not ball. HDMI DDC Clock Analog ground for HDMI Ether RX Error Detection Ether RX Data Input Ether RX Data Input 3.3V supply (I/O buffers) Ether RX Data Enable Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM DDR2 Positive Data Strobe DDR2 Negative Data Strobe Ground for digital and DDR2 SDRAM DDR2 Data Input/Output Ground for digital and DDR2 SDRAM DDR2 Data Input/Output DDR2 Data Input/Output Ground for digital and DDR2 SDRAM 1.05V supply (DDR2 SDRAM DLL) This pin is not ball. This pin is not ball. This pin is not ball.
6-10
BDP-S560
Pin No. V13 V14 V15 V16 V17 V18 V19 V20 V21 V22 V23 V24 V25 V26 V27 V28 V29 V30 V31 V32 V33 V34 V35 W1 W2 W3 W4 W5 W6 W7 W8 W9 W10 W11 W12 W13 W14 W15 W16 W17 W18 W19 W20 W21 W22 W23 W24 W25 W26 W27 W28 W29 W30 W31 W32 W33 W34 W35 Y1 Y2 Y3
Name GND GND GND GND GND GND GND GND GND HAVDD HAVSS VOID VOID VOID HDSDA VDD10 VDD10 ETTXD1 ETTXD0 ETTXEN GND USBDP2 USBRSDP2 GND GND D0DQ15 GND D0DQ1 D0DQ3 D0DQ0 VDD18 VDD18 VOID VOID VOID PVDD PGND GND GND GND GND GND GND GND GND GND VOID VOID VOID GND GND GND USBOCI2 USBOCI1 GND USBDGND USBDM2 USBRSDM2 D0CLK0B D0CLK0 GND
I/O I/O O O O I/O I/O I/O I/O I/O I/O I I I/O I/O O O -
Description Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM 3.3V supply (HDMI Analog VDD) Analog ground for HDMI This pin is not ball. This pin is not ball. This pin is not ball. HDMI DDC Data 1.05V supply (core) 1.05V supply (core) Ether TX Data Output Ether TX Data Output Ether TX Data Enable Ground for digital and DDR2 SDRAM USB D+ signal USB Full/low speed D+ signal Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM DDR2 Data Input/Output Ground for digital and DDR2 SDRAM DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Input/Output 1.8V supply (DDR2 SDRAM) 1.8V supply (DDR2 SDRAM) This pin is not ball. This pin is not ball. This pin is not ball. 1.05V supply for PLL Ground for PLL Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM This pin is not ball. This pin is not ball. This pin is not ball. Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM USB Over-current status USB Over-current status Ground for digital and DDR2 SDRAM Ground for USB USB D- signal USB Full/low speed D- signal DDR2 Negative Clock DDR2 Positive Clock Ground for digital and DDR2 SDRAM
6-11
BDP-S560
Pin No. Y4 Y5 Y6 Y7 Y8 Y9 Y10 Y11 Y12 Y13 Y14 Y15 Y16 Y17 Y18 Y19 Y20 Y21 Y22 Y23 Y24 Y25 Y26 Y27 Y28 Y29 Y30 Y31 Y32 Y33 Y34 Y35 AA1 AA2 AA3 AA4 AA5 AA6 AA7 AA8 AA9 AA10 AA11 AA12 AA13 AA14 AA15 AA16 AA17 AA18 AA19 AA20 AA21 AA22 AA23 AA24 AA25 AA26 AA27 AA28 AA29
Name D0DM0 GND D0DQ2 D0DQ5 VDD18 D0VDD10 VOID VOID VOID PVDD PGND GND GND GND GND GND GND GND VDD10 VDD10 VOID VOID VOID VDD3 VDD3 VDD3 USBPPON2 USBPPON1 USBVDD33 USBVDD33 USBDGND USBDGND GND GND D0DQ7 D0DQ4 VDD18 D0DQ6 D0WEB GND GND VOID VOID VOID GND GND GND GND GND GND GND GND GND GND GND VOID VOID VOID GND GND GND
I/O I/O I/O I/O O O I/O I/O I/O O -
Description DDR2 Data Mask Ground for digital and DDR2 SDRAM DDR2 Data Input/Output DDR2 Data Input/Output 1.8V supply (DDR2 SDRAM) 1.05V supply (DDR2 SDRAM DLL) This pin is not ball. This pin is not ball. This pin is not ball. 1.05V supply for PLL Ground for PLL Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM 1.05V supply (core) 1.05V supply (core) This pin is not ball. This pin is not ball. This pin is not ball. 3.3V supply (I/O buffers) 3.3V supply (I/O buffers) 3.3V supply (I/O buffers) USB Power Control USB Power Control 3.3V supply for USB 3.3V supply for USB Ground for USB Ground for USB Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM DDR2 Data Input/Output DDR2 Data Input/Output 1.8V supply (DDR2 SDRAM) DDR2 Data Input/Output DDR2 Command Write Enable Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM This pin is not ball. This pin is not ball. This pin is not ball. Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM This pin is not ball. This pin is not ball. This pin is not ball. Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM
6-12
BDP-S560
Pin No. AA30 AA31 AA32 AA33 AA34 AA35 AB1 AB2 AB3 AB4 AB5 AB6 AB7 AB8 AB9 AB10 AB11 AB12 AB13 AB14 AB15 AB16 AB17 AB18 AB19 AB20 AB21 AB22 AB23 AB24 AB25 AB26 AB27 AB28 AB29 AB30 AB31 AB32 AB33 AB34 AB35 AC1 AC2 AC3 AC4 AC5 AC6 AC7 AC8 AC9 AC10 AC11 AC12 AC13 AC14 AC15 AC16 AC17 AC18 AC19 AC20
Name GND GND USBPVDDFIL USBPVSS USBDP1 USBRSDP1 D0DQS0 D0DQS0B GND VDD18 D0CKE D0CKERSTB D0ADD10 GND D0VREF VOID VOID VOID VDD10 VDD10 GND PGND PGND GND GND VDD10 GND VDD10 VDD10 VOID VOID VOID PVDD PGND PVDD VDD10 VDD3 GPIO18 GPIO32 USBDM1 USBRSDM1 GND GND VDD18 GND D0ADD7 D0ADD14 D0ADD12 GND GND VOID VOID VOID VDD10 VDD10 GND PVDD PVDD GND GND VDD10
I/O O I/O I/O I/O I/O O I O I I/O I/O I/O I/O O O O -
Description Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM USB Connector for USBPGND Analog ground for USB PLL USB D+ signal USB Full/low speed D+ signal DDR2 Positive Data Strobe DDR2 Negative Data Strobe Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) DDR2 Clock Enable DDR2 D0CKERSTB output control DDR2 Address Output Ground for digital and DDR2 SDRAM DDR2 Reference Voltage This pin is not ball. This pin is not ball. This pin is not ball. 1.05V supply (core) 1.05V supply (core) Ground for digital and DDR2 SDRAM Ground for PLL Ground for PLL Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM 1.05V supply (core) Ground for digital and DDR2 SDRAM 1.05V supply (core) 1.05V supply (core) This pin is not ball. This pin is not ball. This pin is not ball. 1.05V supply for PLL Ground for PLL 1.05V supply for PLL 1.05V supply (core) 3.3V supply (I/O buffers) AOHBCK: BCK Output for External HDMI Device AOHBD3: Data Output for External HDMI Device USB D- signal USB Full/low speed D- signal Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM DDR2 Address Output DDR2 Address Output DDR2 Address Output Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM This pin is not ball. This pin is not ball. This pin is not ball. 1.05V supply (core) 1.05V supply (core) Ground for digital and DDR2 SDRAM 1.05V supply for PLL 1.05V supply for PLL Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM 1.05V supply (core)
6-13
BDP-S560
Pin No. AC21 AC22 AC23 AC24 AC25 AC26 AC27 AC28 AC29 AC30 AC31 AC32 AC33 AC34 AC35 AD1 AD2 AD3 AD4 AD5 AD6 AD7 AD8 AD9 AD10 AD11 AD12 AD13 AD14 AD15 AD16 AD17 AD18 AD19 AD20 AD21 AD22 AD23 AD24 AD25 AD26 AD27 AD28 AD29 AD30 AD31 AD32 AD33 AD34 AD35 AE1 AE2 AE3 AE4 AE5 AE6 AE7 AE8 AE9 AE10 AE11
Name GND VDD10 VDD10 VOID VOID VOID PGND PGND PVDD GPIO16 GPIO17 GPIO33 GPIO31 USBAVDD USBRREF VDD18 VDD18 D0BA1 D0ADD1 D0ADD6 D0ADD4 D0CASB GND D0VDD10 VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VDD3 VDD3 GPIO30 GPIO19 PCIRSTB PCICLKI GND USBCOM USBAVSS D0BA0 D0ADD9 D0ADD3 D0ADD5 D0ADD11 D0ADD0 GND VDD18 VDD18 VOID VOID
I/O I/O I/O I/O I/O I O O O O O I/O I/O I I O O O O O O -
Description Ground for digital and DDR2 SDRAM 1.05V supply (core) 1.05V supply (core) This pin is not ball. This pin is not ball. This pin is not ball. Ground for PLL Ground for PLL 1.05V supply for PLL AOHTX: IEC60958 Output for External HDMI Device AOHLRCK: LRCK Clock Output for External HDMI Device AOHMCK: Master Clock Output for External HDMI Device AOHBD2: Data Output for External HDMI Device Analog 3.3V supply for USB USB Connector for USBAGND 1.8V supply (DDR2 SDRAM) 1.8V supply (DDR2 SDRAM) DDR2 Bank Address DDR2 Address Output DDR2 Address Output DDR2 Address Output DDR2 Colmun Address Strobe Signal Ground for digital and DDR2 SDRAM 1.05V supply (DDR2 SDRAM DLL) This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. 3.3V supply (I/O buffers) 3.3V supply (I/O buffers) AOHBD1: Data Output for External HDMI Device AOHBD0: Data Output for External HDMI Device PCI I/F PCI Hardware Reset PCI 33MHz Clock Input/27MHz Clock Input for System Clock Ground for digital and DDR2 SDRAM Analog ground for USB (bulk) Analog ground for USB DDR2 Bank Address DDR2 Address Output DDR2 Address Output DDR2 Address Output DDR2 Address Output DDR2 Address Output Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) 1.8V supply (DDR2 SDRAM) This pin is not ball. This pin is not ball.
6-14
BDP-S560
Pin No. AE12 AE13 AE14 AE15 AE16 AE17 AE18 AE19 AE20 AE21 AE22 AE23 AE24 AE25 AE26 AE27 AE28 AE29 AE30 AE31 AE32 AE33 AE34 AE35 AF1 AF2 AF3 AF4 AF5 AF6 AF7 AF8 AF9 AF10 AF11 AF12 AF13 AF14 AF15 AF16 AF17 AF18 AF19 AF20 AF21 AF22 AF23 AF24 AF25 AF26 AF27 AF28 AF29 AF30 AF31 AF32 AF33 AF34 AF35 AG1 AG2
Name VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID GND GND RDATA15/GDATA15 RDATA14/GDATA14 RDATA13/GDATA13 RDATA12/GDATA12 RDATA11/GDATA11 VDD3 USBXO D0ADD13 D0ADD8 GND D0CS1B D0ODT1 GND D0ODT0 VDD18 D0VDD10 VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VOID VDD10 VDD10 RDATA10/GDATA10 RDATA9/GDATA9 RDATA8/GDATA8 RDATA7/GDATA7 RDATA6/GDATA6 GND USBXI GND GND
I/O I/O I/O I/O I/O I/O O O O O O O I/O I/O I/O I/O I/O I -
Description This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM ROM Data Input/Output ROM Data Input/Output ROM Data Input/Output ROM Data Input/Output ROM Data Input/Output 3.3V supply (I/O buffers) USB Clock output from Oscillator DDR2 Address Output DDR2 Address Output Ground for digital and DDR2 SDRAM DDR2 Chip Select/Bank Address DDR2 On Die terminal control Ground for digital and DDR2 SDRAM DDR2 On Die terminal control 1.8V supply (DDR2 SDRAM) 1.05V supply (DDR2 SDRAM DLL) This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. 1.05V supply (core) 1.05V supply (core) ROM Data Input/Output ROM Data Input/Output ROM Data Input/Output ROM Data Input/Output ROM Data Input/Output Ground for digital and DDR2 SDRAM USB Clock input to Oscillator Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM
6-15
BDP-S560
Pin No. AG3 AG4 AG5 AG6 AG7 AG8 AG9 AG10 AG11 AG12 AG13 AG14 AG15 AG16 AG17 AG18 AG19 AG20 AG21 AG22 AG23 AG24 AG25 AG26 AG27 AG28 AG29 AG30 AG31 AG32 AG33 AG34 AG35 AH1 AH2 AH3 AH4 AH5 AH6 AH7 AH8 AH9 AH10 AH11 AH12 AH13 AH14 AH15 AH16 AH17 AH18 AH19 AH20 AH21 AH22 AH23 AH24 AH25 AH26 AH27 AH28
Name D0ADD2 D0CS0B D0RASB D0DQ22 D0ADD15 GND VDD18 GND VDD18 GND D1VDD10 VDD18 D1VDD10 GND D1VREF GND D1VDD10 VDD18 D1VDD10 GND VDD3 GND VDD10 GND GND N.U. RDATA5/GDATA5 RDATA4/GDATA4 VDD3 RDATA3/GDATA3 RDATA2/GDATA2 RDATA1/GDATA1 GND D0DQS2 D0DQS2B GND D0DQ21 D0DQ23 D0DQ20 GND VDD18 GND VDD18 GND VDD18 VDD18 VDD18 GND GND GND GND VDD18 VDD18 GND GND VDD3 GND VDD10 GPIO24 GPIO26 GND
I/O O O O I/O O I I I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O O O -
Description DDR2 Address Output DDR2 Chip Select DDR2 Raw Address Strobe Signal DDR2 Data Input/Output DDR2 Address Output Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM 1.05V supply (DDR2 SDRAM DLL) 1.8V supply (DDR2 SDRAM) 1.05V supply (DDR2 SDRAM DLL) Ground for digital and DDR2 SDRAM DDR2 Reference Voltage Ground for digital and DDR2 SDRAM 1.05V supply (DDR2 SDRAM DLL) 1.8V supply (DDR2 SDRAM) 1.05V supply (DDR2 SDRAM DLL) Ground for digital and DDR2 SDRAM 3.3V supply (I/O buffers) Ground for digital and DDR2 SDRAM 1.05V supply (core) Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Fixed at "H" ROM Data Input/Output ROM Data Input/Output 3.3V supply (I/O buffers) ROM Data Input/Output ROM Data Input/Output ROM Data Input/Output Ground for digital and DDR2 SDRAM DDR2 Positive Data Strobe DDR2 Negative Data Strobe Ground for digital and DDR2 SDRAM DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Input/Output Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) 1.8V supply (DDR2 SDRAM) 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM 3.3V supply (I/O buffers) Ground for digital and DDR2 SDRAM 1.05V supply (core) NAND_WP (L: Write Protect) XAMUTE (L: MUTE) Ground for digital and DDR2 SDRAM
6-16
BDP-S560
Pin No. AH29 AH30 AH31 AH32 AH33 AH34 AH35 AJ1 AJ2 AJ3 AJ4 AJ5 AJ6 AJ7 AJ8 AJ9 AJ10 AJ11 AJ12 AJ13 AJ14 AJ15 AJ16 AJ17 AJ18 AJ19 AJ20 AJ21 AJ22 AJ23 AJ24 AJ25 AJ26 AJ27 AJ28 AJ29 AJ30 AJ31 AJ32 AJ33 AJ34 AJ35 AK1 AK2 AK3 AK4 AK5 AK6 AK7 AK8 AK9 AK10 AK11 AK12 AK13 AK14 AK15 AK16 AK17 AK18 AK19
Name RDATA0/GDATA0 RADD25/GADD25 RADD24/GADD24 GND RADD23/GADD23 RADD22/GADD22 RADD21/GADD21 GND GND D0DQ18 D0DQ16 D0DQ30 D0DQ19 VDD18 GND VDD18 GND VDD18 GND VDD18 GND D1RQ1 D1RQ0 GND VDD18 GND GND VDD18 VDD18 GND GND VDD3 GPIO25 GPIO28 GPIO23 RADD20/GADD20 RADD19/GADD19 RADD18/GADD18 RADD17/GADD17 RADD16/GADD16 RADD15/GADD15 VDD3 D0CLK1B D0CLK1 GND D0DM2 D0DQ28 D0DQ17 GND VDD18 GND D1DQ24 D1DQ25 GND VDD18 VDD18 GND GND VDD18 D1ADD9 D1ADD1
I/O I/O O O O O O I/O I/O I/O I/O O O O O O O O O O O O O O I/O I/O I/O I/O I/O O O
Description ROM Data Input/Output ROM Address Output ROM Address Output Ground for digital and DDR2 SDRAM ROM Address Output ROM Address Output ROM Address Output Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Input/Output 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM DDR2 Pull up (150 ohm) to DDR2 SDRAM power supply DDR2 Pull down (150 ohm) to DDR2 SDRAM GND Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM 3.3V supply (I/O buffers) IT_REQ (Communication request for front micon) EMMA_CSI0_DAC2_XCS (L: Active) GLB_XRST (L: RESET) ROM Address Output ROM Address Output ROM Address Output ROM Address Output ROM Address Output ROM Address Output 3.3V supply (I/O buffers) DDR2 Negative Clock DDR2 Positive Clock Ground for digital and DDR2 SDRAM DDR2 Data Mask DDR2 Data Input/Output DDR2 Data Input/Output Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM DDR2 Data Input/Output DDR2 Data Input/Output Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) DDR2 Address Output DDR2 Address Output
6-17
BDP-S560
Pin No. AK20 AK21 AK22 AK23 AK24 AK25 AK26 AK27 AK28 AK29 AK30 AK31 AK32 AK33 AK34 AK35 AL1 AL2 AL3 AL4 AL5 AL6 AL7 AL8 AL9 AL10 AL11 AL12 AL13 AL14 AL15 AL16 AL17 AL18 AL19 AL20 AL21 AL22 AL23 AL24 AL25 AL26 AL27 AL28 AL29 AL30 AL31 AL32 AL33 AL34 AL35 AM1 AM2 AM3 AM4 AM5 AM6 AM7 AM8 AM9 AM10
Name VDD18 GND VDD18 VDD18 VDD18 GND GPIO29 N.U. GPIO27 RADD14/GADD14 GND RADD13/GADD13 RADD12/GADD12 RADD11/GADD11 RADD10/GADD10 RADD9/GADD9 GND GND D0DQ26 D0DQ24 D0DQ31 D0DQ29 VDD18 GND D1DQ26 D1DQ27 D1DQ31 D1DQ16 D1DQ20 D1DQ21 GND D1ADD4 D1ADD6 D1WEB D1BA1 D1DQ1 D1DQ0 D1DQ14 D1DQ10 D1DQ11 D1DQ9 GND VDD3 GND RADD8/GADD8 RADD7/GADD7 VDD3 RADD6/GADD6 RADD5/GADD5 RADD4/GADD4 GND D0DQS3 D0DQS3B GND D0DM3 D0DQ25 VDD18 GND D1DQ28 D1DM3 D1DQ18
I/O O I I/O O O O O O O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O O O O O I/O I/O I/O I/O I/O I/O O O O O O I/O I/O I/O I/O I/O I/O I/O
Description 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) 1.8V supply (DDR2 SDRAM) 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM DAC_XRST (L: RESET) Fixed at "H" XVMUTE (Video Mute ON="0") ROM Address Output Ground for digital and DDR2 SDRAM ROM Address Output ROM Address Output ROM Address Output ROM Address Output ROM Address Output Ground for digital and DDR2 SDRAM Ground for digital and DDR2 SDRAM DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Input/Output 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Input/Output Ground for digital and DDR2 SDRAM DDR2 Address Output DDR2 Address Output DDR2 Command Write Enable DDR2 Bank Address DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Input/Output Ground for digital and DDR2 SDRAM 3.3V supply (I/O buffers) Ground for digital and DDR2 SDRAM ROM Address Output ROM Address Output 3.3V supply (I/O buffers) ROM Address Output ROM Address Output ROM Address Output Ground for digital and DDR2 SDRAM DDR2 Positive Data Strobe DDR2 Negative Data Strobe Ground for digital and DDR2 SDRAM DDR2 Data Mask DDR2 Data Input/Output 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM DDR2 Data Input/Output DDR2 Data Mask DDR2 Data Input/Output
6-18
BDP-S560
Pin No. AM11 AM12 AM13 AM14 AM15 AM16 AM17 AM18 AM19 AM20 AM21 AM22 AM23 AM24 AM25 AM26 AM27 AM28 AM29 AM30 AM31 AM32 AM33 AM34 AM35 AN1 AN2 AN3 AN4 AN5 AN6 AN7 AN8 AN9 AN10 AN11 AN12 AN13 AN14 AN15 AN16 AN17 AN18 AN19 AN20 AN21 AN22 AN23 AN24 AN25 AN26 AN27 AN28 AN29 AN30 AN31 AN32 AN33 AN34 AN35 AP1
Name D1DQ22 VDD18 D1DM2 D1DQ23 D1CS1B D1ADD14 D1ADD12 GND D1CKE D1DM0 D1DQ3 D1DQ2 VDD18 D1DQ8 D1DQ13 D1DM1 GND FCSB0 FCSB1 FCSB2 FCSB3 GND RADD3/GADD3 RADD2/GADD2 RADD1/GADD1 VOID GND D0DQ27 GND VDD18 GND D1DQ30 GND D1DQ29 D1DQ17 VDD18 GND D1ADD15 D1ADD2 D1ADD0 D1ADD7 D1ADD13 D1CKERSTB GND D1DQ6 D1DQ4 VDD18 GND D1DQ12 GND D1DQ15 GND VDD18 VDD3 GRDYB FOEB/GOEB FWEB/GWEB VDD3 RADD0/GADD0 VOID VOID
I/O I/O I/O I/O O O O O I/O I/O I/O I/O I/O I/O O O O O O O O I/O I/O I/O I/O O O O O O I I/O I/O I/O I/O I O O O -
Description DDR2 Data Input/Output 1.8V supply (DDR2 SDRAM) DDR2 Data Mask DDR2 Data Input/Output DDR2 Chip Select/Bank Address DDR2 Address Output DDR2 Address Output Ground for digital and DDR2 SDRAM DDR2 Clock Enable DDR2 Data Mask DDR2 Data Input/Output DDR2 Data Input/Output 1.8V supply (DDR2 SDRAM) DDR2 Data Input/Output DDR2 Data Input/Output DDR2 Data Mask Ground for digital and DDR2 SDRAM ROM Chip select ROM Chip select ROM Chip select (Not used) ROM Chip select (Not used) Ground for digital and DDR2 SDRAM ROM Address Output ROM Address Output ROM Address Output This pin is not ball. Ground for digital and DDR2 SDRAM DDR2 Data Input/Output Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM DDR2 Data Input/Output Ground for digital and DDR2 SDRAM DDR2 Data Input/Output DDR2 Data Input/Output 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM DDR2 Address Output DDR2 Address Output DDR2 Address Output DDR2 Address Output DDR2 Address Output DDR2 D0CKERSTB output control Ground for digital and DDR2 SDRAM DDR2 Data Input/Output DDR2 Data Input/Output 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM DDR2 Data Input/Output Ground for digital and DDR2 SDRAM DDR2 Data Input/Output Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) 3.3V supply (I/O buffers) GIO I/F Ready for external device Not used) NOR Flash ROM Output Enable NOR Flash ROM Write Enable 3.3V supply (I/O buffers) ROM Address Output This pin is not ball. This pin is not ball.
6-19
BDP-S560
Pin No. AP2 AP3 AP4 AP5 AP6 AP7 AP8 AP9 AP10 AP11 AP12 AP13 AP14 AP15 AP16 AP17 AP18 AP19 AP20 AP21 AP22 AP23 AP24 AP25 AP26 AP27 AP28 AP29 AP30 AP31 AP32 AP33 AP34 AP35 AR1 AR2 AR3 AR4 AR5 AR6 AR7 AR8 AR9 AR10 AR11 AR12 AR13 AR14 AR15 AR16 AR17 AR18 AR19 AR20 AR21 AR22 AR23 AR24 AR25 AR26 AR27
Name VOID GND D1DQS3B GND D1CLK1 GND D1DQS2B GND VDD18 GND D1RASB D1CS0B D1CASB GND VDD18 D1ADD8 D1ADD10 D1ADD3 GND VDD18 GND D1DQS0B GND D1CLK0 GND D1DQS1B GND VDD18 NRBB NCLE GCSB0 GCSB1 VOID VOID VOID VOID VOID D1DQS3 GND D1CLK1B GND D1DQS2 GND VDD18 D1DQ19 D1ODT0 D1ODT1 D1ADD11 VDD18 GND D1ADD5 D1BA0 D1DQ7 D1DQ5 VDD18 GND D1DQS0 GND D1CLK0B GND D1DQS1
I/O I/O O I/O O O O O O O I/O O I/O I O O O I/O O I/O I/O O O O O O I/O I/O I/O O I/O
Description This pin is not ball. Ground for digital and DDR2 SDRAM DDR2 Negative Data Strobe Ground for digital and DDR2 SDRAM DDR2 Positive Clock Ground for digital and DDR2 SDRAM DDR2 Negative Data Strobe Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM DDR2 Raw Address Strobe Signal DDR2 Chip Select DDR2 Colmun Address Strobe Signal Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) DDR2 Address Output DDR2 Address Output DDR2 Address Output Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM DDR2 Negative Data Strobe Ground for digital and DDR2 SDRAM DDR2 Positive Clock Ground for digital and DDR2 SDRAM DDR2 Negative Data Strobe Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) NAND Flash ROM Ready/Busy NAND Flash ROM Command Latch Enable GIO I/F Chip select GIO I/F Chip select (Not used) This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. This pin is not ball. DDR2 Positive Data Strobe Ground for digital and DDR2 SDRAM DDR2 Negative Clock Ground for digital and DDR2 SDRAM DDR2 Positive Data Strobe Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) DDR2 Data Input/Output DDR2 On Die terminal control DDR2 On Die terminal control DDR2 Address Output 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM DDR2 Address Output DDR2 Bank Address DDR2 Data Input/Output DDR2 Data Input/Output 1.8V supply (DDR2 SDRAM) Ground for digital and DDR2 SDRAM DDR2 Positive Data Strobe Ground for digital and DDR2 SDRAM DDR2 Negative Clock Ground for digital and DDR2 SDRAM DDR2 Positive Data Strobe
6-20
BDP-S560
Pin No. AR28 AR29 AR30 AR31 AR32 AR33 AR34 AR35
Name GND VDD18 NFOEB NWEB NALE VOID VOID VOID
I/O O O O -
Description Ground for digital and DDR2 SDRAM 1.8V supply (DDR2 SDRAM) NAND Flash ROM Output Enable NAND Flash ROM Write Enable NAND Flash ROM Address Latch Enable This pin is not ball. This pin is not ball. This pin is not ball.
6-21E
Main Functions
- Starting Service Mode To start Service Mode, while the AC power is off, turn on the AC power while holding down a specific key (PLAY key, STOP key, or OPEN/CLOSE key) on the front panel of the unit. Release the key when SERVICE appears on the front display panel. Startup is completed when the Service Mode screen is displayed on the monitor. Use the remote control to perform operation.
- View ErrorLog/CommandLog This displays the error log or command log. The displayed information can also be saved to a USB memory device.
- Diag (Diagnostics) This performs individual tests on devices installed on the board.
- Drive (Drive-related diagnostics and tools) These are tools for performing diagnostics on the BD-Drive and writing of operation data. (For details on the menu options, refer to the separate documentation.)
SECTION 7 SERVICE MODE
- Factory Initialize (Factory default settings) This returns the set to the factory default settings.
7-1
- Network This checks the network connection. 1. Ifconfig is used to display the network settings of the set unit. When this is executed, the #ifconfig command is executed, and the command execution results are displayed. 2. Ping is used to check network connectivity with the terminal specified by the IP address. When this is executed, the #ping command is executed, and the command execution results are displayed.
- Version Up (Version update) This updates the version using an update disc. For details on version updating, refer to the separate documentation.
- System Information This displays the system information of this set. Information about the software version and drive is displayed.
BDP-S560
Menu Layout
DiagMenu DiagMenu --Diagnostics (Self-diagnostic tools) Diagnostics (Self-diagnostic tools) Device Test Device Test --Individual tests for board devices Individual tests for board devices Video Path Test Video Path Test --Video output test Video output test Audio Path Test Audio Path Test --Audio output test Audio output test DriveMenu DriveMenu --BDP4G drive-related diagnostics & tools BDP4G drive-related diagnostics & tools WirelessLAN Test WirelessLAN Test -- Wireless LAN test Wireless LAN test
Service Mode Menu Service Mode Menu [1]DiagMenu [1]DiagMenu [2]DriveMenu [2]DriveMenu [3]LogMenu [3]LogMenu [4]FactoryInitialize [4]FactoryInitialize [5]Network [5]Network [6]VersionUp [6]VersionUp [7]SystemInformation [7]SystemInformation
LogMenu LogMenu View the error log and command log View the error log and command log
Error Log Error Log --View the error log View the error log
7-2
Command Log Command Log --View the command log View the command log FactoryInitialize FactoryInitialize --Factory default settings Factory default settings Network Network --Network diagnostics Network diagnostics Status Status --Check the network settings Check the network settings Ping Ping --Check the network connectivity Check the network connectivity VersionUp VersionUp --Update the version by disc Update the version by disc
BDP-S560
SystemInformation SystemInformation --View the system information View the system information
Service Mode Menu (Top menu)

Service Mode Menu [1] [2] [3] [4] [5] [6] [7] DiagMenu DriveMenu LogMenu FactoryInitialize Network VersionUp SystemInformation
Overview: Top menu of the Service Mode The various functions are accessed from this menu.
Operations: [1] [2] [3] [4] [5] [6] [7] [UP][DOWN] [ENT]
DiagMenu (Diagnostics) DriveMenu (Drive-related diagnostics & tools) LogMenu (View ErrorLog/CommandLog) Factory Initialize (Factory default settings) Network VersionUp (Version update by disc) SystemInformation (View system information) Move the cursor up or down Open the selected cursor item
The cursor is not displayed initially.
Display panel: When a cursor key or selected menu key is used, text is output to the display panel. Initially, SERVICE is displayed. Character strings shown on the display panel
HELP : [DOWN][ENT][(NUM)]
7-3
DiagMenu: DriveMenu: LogMenu: FactoryInitialize: Network: VersionUp: SystemInformation:
S-DIAG S-DRIVE S-LOG S-FINIT S-NET S-VUP S-INFO
Shows hints (such as the currently usable keys)
BDP-S560
DiagMenu (Diag: 1)
(Screen 1) Diag Category: Device Test (Screen 2) Diag Category: Device Test Device: USB Host
Overview: This menu is used to conduct tests on devices installed on the board for the Device Test/Audio Path Test/Video Path Test/Wireless LAN Test.
Screen 1: Selecting the test category Operations: [LEFT] [RIGHT] Select the category [DOWN] [ENT] Open the selected category
Screen 2: Device test After Device Test is selected in Screen 1, the device to be tested is selected. Operations: [LEFT] [RIGHT] Select the device to be tested [ENT] Execute the test [UP] Return to the test category selection Move the cursor up [DOWN] Move the cursor down
USB Media check Checking...
... NG
7-4
Stepup2 Stepup2
>Test category list Device Test Video Test Audio Test WirelessLAN Test
<-
Stepup1/2
- Device Test: USB Host: USB terminal check USB HubID Check USB Media Check
<-
Stepup2
(Screen 3) HELP: * Diag [RIGHT][UP][ENT][RET] Category: Device Test Device: Ifcon FDP all ON FAN rotating detection Show strings ON:rotateOFF:stop LED Sequecial ON Plug in detection of headphone Fan Control ON (Stepup2 only) CONNECT or DISCONNECT FanState: ON HeadPhone: CONNECT
D/A Converter: AudioDac test Dac 2 [ch] Read Check Dac 8 [ch] Read Check Dac HeadPhone Check
<<-
Stepup1/2 Stepup2
D Terminal: D terminal check IFCon: IFCon function test (Screen 3) FDP all ON Show Strings LED Sequecial FAN Control FanState HeadPhone //Plug in detection of headphone <-
BDP-S560
Audio DSP: Audio DSP test Register Read Check (Revision display) <-
HELP: [RIGHT][UP][ENT][RET]
DiagMenu (Diag: 2)
Stepup2 Stepup2
HD Enhancer: HD Enhancer test Register Read Check (Revision display) External HDMI: External HDMI test Register Read Check (Revision display)
<-
(Screen 4) Diag Category: Video Test [ENT]
<-
- Video Path Test Screen 4: When the Video Test category is selected [ENT] Show/Hide color bar [UP][RET] Return to test category selection
[ENT] Show Color Bar (Screen 4-2)
- Audio Path Test Screen 5: When the Audio Test category is selected [ENT] Play/stop audio tone
HELP: [UP][ENT][RET]
Basic/Stepup1 [UP][RET]
Return to test category selection
Stepup2
[ENT]
[UP][DOWN] [RET]
Audio tone play menu selection Return to test category selection
7-5
Menu:
Basic/Stepup1 Generate Tone Sound Output the audio tone to all terminal
//Output the audio tone to all terminal
//Output the audio tone from EMMA2ch to the headphone
(Screen 5) * Diag Audio Test Category: Audio Test [1] Start All Output [2] Start Headphone Output(2ch) [3] Start Headphone Output(8ch)
Stepup2 [1] Start All Output [2] Start Headphone Output (2ch) [3] Start Headphone Output (8ch)
//Output the audio tone from EMMA8ch to the headphone
HELP: [UP][DOWN][ENT][RET]
ex) In case of Stepup2
BDP-S560
DiagMenu (Diag: 3)
- WirelessLAN Test
Screen 6: When the WirelessLAN category is selected [1] Display the wireless LAN module information Store module information to the registry by [RED] [2] Connect to the access point [3] Get value and display of RSSI *Can not get the correct value of RSSI, if it connected to AP [RET] Return to test category selection
(1) Show WLAN HwInfo (Screen 6)
*Disconnect the AP, if it is connected
Serial: Serial No. Board: Board revision Model: Model No. Mac: Mac address
[RED]: Store module information to the registry ex) Example of store to the registry wlan_customvar1=010000df wlan_ethaddr=00:01:36:23:FD:CF
(Screen 6) * Diag Category: WirelessLAN Test (1) Show WLAN HwInfo (2) Connect to AccessPoint (3) Start Display RSSI Value [Wlan Module Info] Serial: 0x0000df Board : 0x01 Model : 0x00 Mac : 00:01:36:23:FD:CF
(2) Connect to AccessPoint (Screen 7)
- Get the setting value of network from USB memory device
(Screen 7) * Diag HELP: [(NUM)][RET] Category: WirelessLAN Test (1) Show WLAN HwInfo (2) Connect to AccessPoint (3) Start Display RSSI Value CERT : COUNTRY: WEPKEY : PMK : SSID : IPADDR : NETMASK: BCADDR : WPA2-PSK_AES US/5 abcdef1234 ABCDE12345 NETGEAR-DualBand-N 192.168.1.10 255.255.255.0 192.168.1.255
7-6
Status : Connected! - When can not read the svc_wlan.conf from USB memory device or not
exist a setting item, it use the following default value.
The set side: /dev/sda1 Read the following file to root directory of USB memory device File name: svc_wlan.conf Authentication method: SVC_CERT WEP-OPENSYSTEM WPA2-PSK_AES WPA-PSK_TKIP WEP_SHAREDKEY_AUTH WPA-PSK_AES NO-ENCRYPT Country code: SVC_COUNTRY_CODE SVC_REGULATORY_REVISION WEP key: SVC_WEPKEY SSID SVC_SSID PMK: SVC_PMK Setting of IP/NetMask/BroadCast SVC_IPADDR 192.168.1.10 SVC_NETMASK 255.255.255.0 SVC_BROADCAST 192.168.1.255
HELP: [(NUM)][RET]
- "Connected!" is displayed to the "Status", if it is connected to the AP.
(3) Start Display RSSI Value
BDP-S560
Display the RSSI value *Does not display the correct value of RSSI, if execute this function without the AP connection
SVC_CERT SVC_COUNTRY_CODE SVC_REGULATORY_REVISION SVC_WEPKEY SVC_SSID SVC_PMK SVC_IPADDR SVC_NETMASK SVC_BROADCAST
NO-ENCRYPT US 5 abcdef1234 NETGEAR-DualBand-N ABCDE12345 192.168.1.10 255.255.255.0 192.168.1.255
DriveMenu (Drive-related Diagnostics & Tools)

(Screen 1) Diag [1] [2] [3] [4] [5] [6] [7]
Information is displayed here when one of the menu options below is selected (See below.) [1] TrayOpen/Close [5] DriveDeviceDiag [6] DriveLDTime [7] DeltaIOPCheck
Overview: This menu is used to operate the drive using drive-related diagnostics and tools.
Screen 1: Selecting items Operations: [UP] [DOWN] Move the cursor up or down [ENT] Open the selected cursor item [RET] Return to the top menu
> Test item list 1. Open/close the drive tray 2. Perform JT check 3. Write OP data to drive 4. Perform aging by opening and closing the drive tray 5. Perform device diagnostics for drive 6. Acquire and display LD time from drive 7. Check IOP and display the results
TrayOpen/Close JTCheck RewriteOPData TrayAging DriveDeviceDiag DriveLDTime DeltaIOPCheck
7-7
Display Panel: TrayOpen/Close: JTCheck: RewriteOPData: TrayAging: DriveDeviceDiag: DriveLDTime: DeltaIOPCheck:
DV-O/C DV-JT DV-WOP DV-AGN DV-DIAG DV-LDTM DV-DIOP
- TrayOpen/Close (Screen 2) Operations: [UP][DOWN] Move the cursor up or down (Open/Close) [ENT] Execute the selected cursor item [RET] Return to the drive menu
(Screen 2)TrayOpen/Close
TrayCtrl Open Close Processing
(Screen 3) DriveDeviceDiag
DriveDeviceDiag Remove DISC and close tray. [ENT] Start Device Diag OK - DeviceDiag
- DriveDeviceDiag (Screen 3) Operations: [ENT] Execute DriveDeviceDiag [RET] Return to the drive menu
- DriveLDTime (Screen 4) Operations: [ENT] Display the LD time of the drive [RET] Return to the drive menu
(Screen 4) DriveLDTime
DriveLDTime [ENT] Show LDTime BD :[ 1:25] DVD:[ 0:00] CD :[ 0:00]
(Screen 5) DeltaIOPCheck
DeltaIOPCheck [ENT] Start BD :[ DVD:[ CD :[ TEMP:[
- DeltaIOPCheck (Screen 5) Operations: [ENT] Display the IOP of the drive [RET] Return to the drive menu If IOP measurement is executed, version update by CD is no longer possible in Service Mode.
0] 2] 2] 0]
BDP-S560
DriveMenu (Drive-related Diagnostics & Tools - Continued)

(Screen 6) DriveJTCheck TrayOpen TrayClose PSN: [START] (Screen 7) DriveTrayAging Times : [START] Tray Open/Close: 0 (Screen 8) DriveReWriteOPData Insert USB StorageDevice ... Remove DISC and Close tray. [ENT] Start
- JT Check (Screen 6) Operations: [UP][DOWN] Move the cursor up or down(TrayOpen/TrayClose/PSN/START) [ENT] Select and execute the selected cursor item [RET] Return to drive menu
PSN input(PSN): Operations: [(NUM)] [CLEAR] [RET][ENT]
Number input Backspace Return
- TrayAging (Screen 7) Operations: [UP][DOWN] Move the cursor up or down (Times/START) [ENT] Select and execute the selected cursor item [RET] Return to drive menu
7-8
Drive tray open/close count input (Times): Operations: [(NUM)] Number of times drive tray is opened and closed [CLEAR] Backspace [RET][ENT] Return
- ReWriteOPData (Screen 8) Operations: [ENT] Read, register, and write drive operation data Before executing the above operation, a USB memory device with OP data must be inserted [RET] Return to drive menu
Err: Cant read from USBMem!(-1)
Drive operation data The operation data is read from the USB memory device. The device that is read(loaded device) is located in /dev/sda1. (In the Setup/ES model, the storage device loaded in one of the two USB ports that is recognized first is designated as /dev/sda1.) The data in BuData.txt in the USB memory device (route) is read.
HELP: [ENT][RET]
Example of screen when USB memory device is not inserted
For details on the above drive tools, refer to the separate documentation.
BDP-S560
Log: Command Log / Error Log (Display of Logs)

(Screen 1) Select Log [1] Error Log [2] Command Log (Screen 2) Error Log 001 08/01/01 00:53:19: [ErrCode:080400000000] 002 08/01/01 00:53:45: [ErrCode:080400252100] 003 08/01/01 00:54:00: [ErrCode:080400005555] : : (Screen 3) HELP : [DOWN][ENT][(NUM)] Command Log 0001 08/01/01 00:53:19: 0 POWER 0002 08/01/01 00:53:45: 1 POWER 0003 08/01/01 00:54:00: 79 OPEN_CLOSE : : 0 1 0
Overview: This is used to display the log information.
Screen 1: Selecting the log type that is displayed Operations: [1] Open the Error Log output screen [2] Open the Command Log output screen [UP][DOWN] Move the cursor up or down [ENT] Open the selected cursor item [RET] Return to Service Mode top menu
Screen 2: Display of Error Log Operations: [LEFT] Previous page [RIGHT] Next page [RET] Return to screen for selecting log type (Screen 1) [RED] Save the error log data to the USB memory device
Screen 3: Display of Command Log Operations: [LEFT] Previous page [RIGHT] Next page [RET] Return to screen for selecting log type (Screen 1) [RED] Save the command log data to the USB memory device
7-9
Display panel: When log type is selected
When log is displayed
Error log: S-ELOG Command log: S-CLOG Page indicator ex) 1/50
>Reading the log display Error log: 001 08/01/01 00:53:19: [ErrCode:080400000000] [Number (from oldest log)] [Date] [Time] [Error code] Command log: 0001 08/01/01 00:53:19: 0 POWER 0 [No. (from oldest log)] [Date] [Time] [Count] [Command name] [Edge 0:on 1:off]
Copying logs to a USB memory device Load the USB memory device into the set while the log screen is displayed, and press the [RED] button. Error log: If the getErrLogFile.trm file is found in the USB memory device, the errlog.log file is output. Command log: If the getCmdLogFile.trm file is found in the USB memory device, the cmdlog.log file is output. This function cannot be used if USBHost test is being conducted in the Diag menu. Several seconds are required for saving the data, and so be sure to wait long enough before removing the USB memory device.
< Page 1/50 >
BDP-S560
Factory Initialize (Factory Default Settings)

(Screen 1) Factory Initialize
Overview: This is used to return the set to the factory default settings. This returns all modified settings to the factory default settings. However, the initialization process is not complete by only performing this operation. After this operation, the set must be rebooted to complete the initialization process. A normal restart is used to reboot. Initialization is not completed by restarting in Service Mode or other special mode.
[ENT] Start Initialize [RET] Return to Top Menu
Operations: Screen 1 To return the set to the factory default settings, press [ENT] in this screen. All saved titles are erased. [ENT] Initialize the set to the factory default state [RET] Return to Service Mode top menu
(Screen 2) Factory Initialize
Screen 2 This is the screen displayed after initialization is executed. Initialization is completed by rebooting the set. Turn the AC power supply off and then on again. You can continue to perform other Service Menu operations before rebooting.
Reboot to complete.
7-10
[RET] Return to Top Menu
Display panel: During initialization: When initialization was successful: When initialization failed:
SETTING INIT-OK (Screen 2) INIT-NG
HELP : [RET]
BDP-S560
Network (Network Test Diagnostics Screen: Ifconfig)

(Screen 1) Network Test: Ifconfig Ping (Screen 2) Network Test: Ifconfig Ping Ping To : Ping To : [START] (Screen 3) Network Test: Ifconfig Ping
Overview: This is the network menu. The various network diagnostic functions are accessed from this menu.
Screen 1: Ifconfig test Operations: [ENT] Execute the Ifconfig command (Display network settings) [RIGHT] Open the Ping test [RTN] Return to Service Mode top menu
Screen 2: Ping test Operations: [LEFT] Open the Ifconfig test [RTN] Return to Service Mode top menu For details on the Ping test, refer to the next page.
Screen 3: During execution of Ifconfig test The Ifconfig command output results are displayed. Operations: [ENT] Execute again [RIGHT] Open the Ping test [RTN] Return to Service Mode top menu
7-11
Display panel:
S-NET
Link encap:Ethernet HWaddr 00:16:01:85:21:A3 inet addr:43.17.110.225 Bcast:43.17.110.255 Mask:255.255.255.0 inet6 addr: fe80::216:1ff:fe85:21a3/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:533280 errors:0 dropped:0 overruns:0 frame:0 TX packets:219639 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:44569483 (42.5 MiB) TX bytes:46206300 (44.0 MiB) Interrupt:217 Base address:0x9c00
HELP: [ENT]:Re/Exe [RIGHT]
The actual screens may differ slightly from the screen content shown here.
BDP-S560
Network (Network Test Diagnostics Screen: Ping)

(Screen 1) Network Test: Ifconfig Ping Ping To : Ping [START] (Screen 2) Network Test: Ifconfig Ping Ping To :> 172.16.200.13
Overview: Ping test
Screen 1: Ping test Operations: [UP] Set the IP address of the ping location [DOWN] Prepare to execute test [RTN] Return to Service Mode top menu For details on the Ping test, refer to the next page.
Screen 2: Specify the IP address of the ping location (IP input mode) When Ping To: is highlighted, press [ENT] to enter the IP address. Operations: [ENT] Exit input [RTN] Exit input [LEFT] Exit input, and open the Ifconfig test [(NUM)] Enter numbers from 0 to 9 [TIME] Enter the character . [CLEAR] Backspace
7-12
Screen 3: During execution of Ping test When START is highlighted, pressing [ENT] executes the Ping test. Operations: [ENT] Execute Ping test [UP] Set the IP address of ping location [DOWN] Prepare to execute test [RTN] Return to Service Mode top menu
[ENT] : Release [RET] : Release [LEFT] : Ifconfig Test (Screen 3) [(NUM)]: 0-9 Network [TIME] : . [CLEAR]: Backspace Test: Ifconfig Ping Ping To : 172.16.200.13 [START]
PING 172.16.200.13 (172.16.200.13) 56(84) bytes of data. 64 bytes from 172.16.200.13: icmp_seq=0 ttl=64 time=0.022 ms --- 172.16.200.13 ping statistics --1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.022/0.022/0.022/0.000 ms, pipe 2
Display panel:
S-NET
[HELP]: [ENT]:Start [UP][LEFT]
BDP-S560
The actual screens may differ slightly from the screen content shown here.
Version Up (Version Update by disc)

(Screen 1) Version Updater [ENT] Start Update [RET] Return to Top Menu (Screen 2) Version Updater Insert update DISC ... [ENT] Tray Close and Check start [RET] Cancel (Screen 3) HELP : [ENT][RET] Version Updater Now, mounting and checking... OK (Screen 4) Version Updater HELP: [ENT][RET] Now, mounting and checking...
Overview: This is used to update the version using an update disc. This menu is not available after IOP measurement is executed.
Screen 1: Screen after entering Version Updater menu Operations: [ENT] Start update by disc (Tray opens, and Screen 2 is opened) [RET] Return to Service Mode top menu
Screen 2: Insert the version update disc Operations: [ENT] Close tray and perform disc check [RET] Cancel (Tray closes, and screen returns to Screen 1)
Screen 3: During disc check OK Operations: The set is rebooted automatically.
Screen 4: During check NG Operations: [Error] (Error message) is output, and the screen returns to screen 2.
7-13
Display panel: During disc loading When loading of disc fails When check fails When check is successful During reboot
V-INSCD V-NODSC V-CHKNG V-CHKOK REBOOT
[Error] Cant use DISC!
BDP-S560
HELP: [ENT][RET]
(Viewing the System Information)

System Information
Overview: This is used to view the system information.
Operations:
[RET]
Return to Service Mode top menu
If the IOP measurement is performed, the VersionUP function in the Service Mode Menu is no longer available.
BDP4G-BP JP 172.16.102.32 00:1a:80:d0:47:65 E0.029.0[F020] BDP4G 3.2.0 BDP4G-3.2.0 01.0.002 20090121D00 Drive : BDP300 1.00 B30000000383_20 LDTime: BD : [ 0:00] DVD: [ 0:11] CD : [ 0:50] IFcon : B0: 0x24 B1: 0x05 FirmDate: 02/12 17:10 Temp : 42 [degC] [RET]: TopMenu
Model : Dest : IP : Mac : CPU : NBL : Kernel: Host :
7-14E
Displayed information: Model name Destination IP address Mac address CPU version NBL version Kernel version Host version Optical disc drive Drive usage time IFCon version IFCon firmware date Temperature of set
Model Dest IP Mac CPU <- [FirmVersion] [GenerationVersion] NBL Kernel Host <- [HostVersion] [ReleaseVersion] Drive <- [Model] [FirmRevision] [SerialNumber] LDTime [Media]: [LDTime] IFCon <- B0: [Block0 version] B1: [Block1 version] FirmDate Temp <- [C]
Display panel:
Viewing the Host version 01.0.002 Displayed as 010 002
BDP-S560
SECTION 8 ERROR LOG LIST

Major Classification Classification Number Cause/Error Description Message on Display Panel Error Information Displayed in Error Log err_info (4-byte length) Category err_code Response by Service Center Additional Notes Cases where problem occurs Device for sending only (ex. DAC 2ch/8ch, ES DAC 2ch/8ch device) Recorded to log during a timeout of the sending complete interrupt Device for sending and receiving (ex. IFcon device) Recorded to log during a timeout of the receiving complete interrupt Other VIDEO_GLUE and HDE specifications are unknown at this time. ID list (Driver/Common/CSI/if/csi_id_bdp3g_ryoushi.h) CSI_ID_DAC_2CH = 0, / Audio DAC AK4385A 2ch Write only / CSI_ID_DAC_8CH = 1, / Audio DAC AK4358 8ch Write only / CSI_ID_DAC_2CH_ES = 2, / Audio DAC PCM1796 2ch Write only for ES / CSI_ID_DAC_8CH_ES = 3, / Audio DACs PCM1791A 2ch 4 Write only for ES / CSI_ID_VIDEO_GLUE = 4, / VIDEO Glue for ES / CSI_ID_HDE1 = 5, / HD Enhancer1 for ES / CSI_ID_HDE2 = 6, / HD Enhancer2 for ES / CSI_ID_CC_UCOM = 7, / Spare micro-controller for CC / CSI_ID_ITCON = 8, / ITcon / Cases where problem occurs Recorded to log during a timeout at sending interrupt standby ID list (Driver/Common/I2C/if/i2c_id_bdp3g_ryoushi.h) I2C_ID_HDMI_A = 0, / External HDMI (sub-addrA) SiI9134 / I2C_ID_HDMI_B = 1, / External HDMI (sub-addrB) SiI9134 / I2C_ID_SCALER = 2, / 1080p SCALER / I2C_ID_HDMI_INTERNAL_A = 3, / EMMA3P Internal HDMI I2C-A / I2C_ID_HDMI_INTERNAL_B = 4, / EMMA3P Internal HDMI I2C-B /
BDP-S560
CSI communication timeout Mainly ITcon communication error
0x01
csi_id
Replace the chip corresponding to the ID, or replace the EMMA3P chip.
System related ERRLOG_CATEGORY_SYSTEM
0x00
I2C communication timeout
0x02
i2c_id
Replace the chip corresponding to the ID, or replace the EMMA3P chip.
Device ID error for HDMI device Read error Wrong region Decode error AACS verify error Wrong TV system (DVD-Video) Drive communication error Drive mechanical error Tray open/close error Command timeout
0x03 0x00 0x01 0x02 0x03 0x04 0x00 0x01 0x02 0x03
VendorId
DeviceId
EMMA fault/External HDMI device fault (for ES) Check for scratches and dust on the disc. Unable to play because of wrong region Problem with stream Disc may be invalid. Disc is invalid. Stream or NaviPack read error. Read error for information is not handled. This is output by detection of EMMA, and so output may continue for some time. When an error has occurred in ReqAacsPmVerifyUsageHash If the TV_system is mixed in the DVD-Video disc, playback stops when mixing is found. EMMA error. Perform a system reboot if this occurs. Perform a system reboot if this occurs. LU error: (Disc loading error Immediate timeout type. Perform a system reboot if this occurs. Cases where problem occurs If the temperature rise results in a thermal shutdown, this is recorded in the log. No information is available yet in the conversion table between temperature data (8bit) A/D value and temperature data. Cases where problem occurs When FANDET is used, a fan breakdown diagnosis by FANDET is recorded in the log.
Playback related ERRLOG_CATEGORY_PB
0x02
Disc, Drive, or Tray related ERRLOG_CATEGORY_DISC
0x04
opcode opcode -
ercd sense_key cdb
Perform key operation again. Replace if the error occurs again. Service repair Perform key operation again. Replace if the error occurs again. Perform key operation again. Replace if the error occurs again.
Heating related ERRLOG_CATEGORY_THERMO
Shutdown due to overheating of set
FAN ERR 0x05
0x01
Temperat ure data (8bit)
Check the operating temperature environment of the set.
FAN breakdown
FAN ERR
0x02
Replace the fan. After rebooting, if the error occurs again, or a malfunction occurs, repair by the Service Center is needed. Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data in the NVRAM are reset. After rebooting, if the error occurs again, or a malfunction occurs, repair by the Service Center is needed. Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data in the NVRAM are reset. After rebooting, if the error occurs again, or a malfunction occurs, repair by the Service Center is needed. Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data in the NVRAM are reset. After rebooting, if the error occurs again, or a malfunction occurs, repair by the Service Center is needed. Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data in the NVRAM are reset. Reboot and perform automatic repair. If the error occurs again, repair by the Service Center is needed. Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data in the NVRAM are reset. Reboot and perform automatic repair. If the error occurs again, repair by the Service Center is needed. Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data in the NVRAM are reset. Reboot and perform automatic repair. If the error occurs again, repair by the Service Center is needed. Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data in the NVRAM are reset. Reboot and perform automatic repair. If the error occurs again, repair by the Service Center is needed. Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data in the NVRAM are reset. Reboot and perform automatic repair. If the error occurs again, repair by the Service Center is needed. Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data in the NVRAM are reset. Reboot and perform automatic repair. If the error occurs again, repair by the Service Center is needed. Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data in the NVRAM are reset. Reboot and perform automatic repair. If the error occurs again, repair by the Service Center is needed. Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data in the NVRAM are reset. If the error still appears after rebooting, repair by the Service Center is needed. (NAND lifespan replacement If the error still appears after rebooting, repair by the Service Center is needed. (NAND lifespan replacement If the error still appears after rebooting, repair by the Service Center is needed. (NAND lifespan replacement If the error still appears after rebooting, repair by the Service Center is needed. (NAND lifespan replacement If the error still appears after rebooting, repair by the Service Center is needed. (NAND lifespan replacement Load a different disc. Load a different disc. Load a different disc. Load a different disc. Insert a USB memory device. Load a different disc. Check the product region, and load a different disc. Check the product region, and load a different disc. Delete the BD data. Load a different disc. Load a different disc. Insert a USB memory device. Insert a USB memory device. Load a different disc, and initialize the settings. Load a different disc, and initialize the settings.
NAND Error
E7001
0x01
NAND Error
E7002
0x02
NAND Error
E7003
0x03
NAND Error
E7004
0x04
NAND Error
E7005
0x05
NAND Error NVRAM related ERRLOG_CATEGORY_NVRAM
E7006 0x07
0x06
NAND Error
E7007
0x07
NAND Error
E7008
0x08
NAND Error
E7009
0x09
NAND Error
E7010
0x0A
NAND Error NAND (SdmRegistry) error NAND (SdmRegistry) error NAND (SdmRegistry) error NAND (SdmRegistry) error NAND (SdmRegistry) error Video filesystem mount error Photo filesystem mount error Video database mount error Photo database mount error USB mount error Video unplayable Video unplayable (invalid region) Video unplayable (invalid tv system) Video unplayable (pin lock) Video unplayable (parental lock) Virtual package authentication error Invalid disc Disc read error Buda read error Buda write error Ada read error Ada write error
E7011 E7101 E7102 E7103 E7104 E7105
0x0B 0x65 0x66 0x67 0x68 0x69 0x01 0x02 0x03 0x04 0x05 0x11 0x12 0x13 0x14 0x15 0x21 0x31 0x32 0x41 0x42 0x51 0x52
DB related ERRLOG_CATEGORY_DB
0x08
There may be something wrong with the BD-J read/write, and the NAND may be corrupted. There may be something wrong with the BD-J read/write, and the NAND may be corrupted.
8-1E
Main Flowchart
Start (and return from each flowchart)
Approximately 10 seconds after the AC is applied, the WAIT display flashes several times and the power is turned OFF automatically. No To Power Supply (System) flowchart. Yes Check the parts and mounting around X401.
No
Are the power supply voltages on the MB board normal?
Yes
Is the main clock (X401) oscillating properly at No 27 MHz? Yes No To IFcon section flowchart
Has system reset (EMMA_XRST) been cancelled? Measurement point JL961 Yes
Replace the MB board. To Drive flowchart BU Adjustment Flow [yy] ~ After BU/MB Replacement ~
Power ON by power switch on front or remote control.
No
To FL/FR board flowchart
Yes No Yes No Is XMB or the SETUP screen displayed on the No video output screen? To Video section flowchart
SECTION 9 TROUBLESHOOTING
9-1
Yes Do the up, down, left, and right arrow keys of the remote control permit operations on the XMB? Yes Yes Are BD, DVD, or other discs that are loaded on No the drive recognized correctly? Yes No Yes Is the sound reproduced properly when a BD, DVD, or other disc is played? Is the picture reproduced properly when a BD, No DVD, or other disc is played? Yes END
SYS ERR display appears on fluorescent tube.
No
Is OPEN or CLOSE displayed on the fluorescent tube?
Yes
Is there any problem in the FFC connection to CN4261 which connects the drives?
To FL/FR board flowchart
To Drive flowchart
Check the flexible cable of the drive. Are CN1301, CN4201, or CN4261 disconnected?
No
To Drive flowchart
To Audio section flowchart
Yes
Check the connections of the connectors. If there is no improvement, replace the MB board. To Drive flowchart BU Adjustment Flow [yy] ~ After BU/MB Replacement ~
BDP-S560
To Video section flowchart
Power Supply (System) flowchart
AC IN
Check the output voltages from the power supply block. Are the following voltages OK?
No
CN301 pin 3, 4:+12V (UNSW12V) CN301 pin 7, 8, 9: +5.8V (UNSW6V) CN801 pin 1: +12V (UNSW12VA) CN801 pin 3: +6V (UNSW6VA) CN801 pin 5: -9V (UNSW-9VA)
Check that the harness has been inserted properly. If there is no problem, replace the power supply block. To Drive flowchart BU Adjustment Flow [yy] ~ After BU/MB Replacement ~
Yes
Check of fuses Have any of the following fuses blown?
No
Replace blown fuses. Replace the MB board if there is no improvement.
MB board: PS301, PS303, PS304, PS802, PS803, PS804 FR board: PS701
Yes
9-2
Yes
No
Check the following power control signals while the power is ON. Are they H level (3.3 V)?
To IFcon section flowchart
PCONT1: MB board R304 PCONT2: MB board R309 PCONT3: MB board R376 PCONT3: MB board R367 ATA_PCONT: MB board CN301 pin 11 ATA_PCONT2: MB board C1285 (+ side)
Yes
Check the voltages based on the schematic No diagram. Are they output correctly?
Voltage lines that are not output are shorted No to GND.
Failure of power supply IC --> Replace the IC. Replace the MB board if there is no improvement. To Drive flowchart BU Adjustment Flow [yy] ~ After BU/MB Replacement ~
Yes
BDP-S560
Power supply is OK
Replace the MB board when the parts on that voltage line cannot be identified as shorted. To Drive flowchart BU Adjustment Flow [yy] ~ After BU/MB Replacement ~
Audio section flowchart
Audio does not sound right
Audio is output properly.
No To Video section flowchart
Video is output properly.
Yes
Yes
Is the fluorescent tube/LED display correct?
No
To Main flowchart
Yes
Is the drive operating properly?
No
To Drive flowchart
Yes
No
Is each power supply supplied to the AUDIO Block?
To Power Supply (System) flowchart
CN801 pin 1: +12V CN801 pin 3: +6V CN801 pin 5: -9V CN203 pin 21: +5V
Yes
Check the input of each power supply.
No
Replace IC link
Q807 (Emitter): -8V Q808 (Emitter): +12V IC809 pin 5: +6V
When Q807 is defective: Replace PS804 When Q808 is defective: Replace PS802 When IC809 is defective: Replace PS803
9-3
Yes
No
Check the output of each power supply.
When IC804 is defective, check the output of No IC304.
Q807 (Collector): -8V Q808 (Collector): +12V IC804 pin 14: +5V
IC304 pin 4: +5V
Yes
Is an audio system digital signal input to IC804?
No
IC804 pin 1: MCLK IC804 pin 2: BCLK IC804 pin 3: DATA IC804 pin 4: LRCK
If faulty, replace the MB board. To Drive flowchart BU Adjustment Flow [yy] ~ After BU/MB Replacement ~
Yes
Are control signals input to IC804?
No
IC804 pin 6: CSN IC804 pin 7: CCLK IC804 pin 8: CDTI CN804 pin 1: XAMUTE CN804 pin 9: Reset
Yes
BDP-S560
Is a digital output (HDMI/Coax/Opt) signal output from each of the Audio output connectors?
No
Video section flowchart
Reproduced video does not appear right
Is the fluorescent tube/LED display correct?
No
To Main flowchart
Yes
Is the drive operating properly?
No
To Drive flowchart
Yes
Check the input of each power supply.
No
Replace the IC link.
Q815 (Emitter): -9V IC805 pin 5: +6V
When Q815 is defective: Replace PS804 When IC805 is defective: Replace PS803
Yes No Check the control lines When Q813 is defective: Check PCONT2 When IC805 is defective: Check SW5VD Yes
Check the output of each power supply.
No
Check the control of each power supply.
Q815 (Collector): -8V IC805 pin 4: +3.3V
Q813 (Emitter): 3.3V IC805 pin 1: 5V
Yes
Replacement device
When Q801 (Collector) is defective: Replace Q801 When IC805 pin 4 is defective: Replace IC805
9-4
Check -5 V Power supply
No
Replacement device
IC806 OUTPUT: -5V
Replace IC806
Yes
Are video signals input to IC808?
No
Check the wiring from IC101.
Pin 8 Y signal Pin 3 C signal Pin 10 Y signal Pin 12 Cb signal Pin 14 Cr signal
Yes
Are control signals input to IC808?
No
Check the wiring from IC101.
IC808 pin 16 PS1 (XVMUTE +3.3V) IC808 pin 15 PS2 (XVMUTE +3.3V)
Yes
Is a video signal output from IC808?
No
Replace IC808
Yes
BDP-S560
Is a signal output from each Video output connector?
No
Check output resistors (R8045, R8041, R8042, and R8043). Check the pin jack block.
Drive flowchart
BLX-104
NO Check PS301, PS303 and PS304 Replace PS when open
NO
BDP-S560 can play the BD-disc. Yes NO Replace the BU. Check the Optical Block Unit (BU) by service NO mode. (Flowchart zz) BU Iop is OK? Yes Optical Block Check (Flowchart yy)
Check Drive Power Supply CN301 pin 15: 12V/pin 12: 5V?
Yes
Check/replace the FFC cable, then check BDP-S560 operates normally. FFC Cable (1-xxxxxxxx) Yes OK
DVD TEST DISC: HLX-513 CD TEST DISC: YEDS-18
BDP-S560 can play the DVD/CD-disc.
NO
Yes Flow chart No.xx (other check sheet)
BU Check Flow [zz] ~ Before BU Replacement ~ Remove the defective BU from Loading Assy. Also remove the BU dumpers (4pcs)
BU Adjustment Flow [yy] ~ After BU/MB Replacement ~
Enter the Service Mode Press <Open/Close>, <PLAY>, <STOP> and plug in AC power.
9-5
Unpack new parts and take Barcode photo by camera Assemble BU with dumpers to Loading Assy (tighten screw with 2kgf) Decode the Barcode photo by using BDBUDec.exe and save the text data to USB memory Enter the service mode and insert USB memory to rear panel Select [2] DriveMenu [3] RewriteOPData After finishing the Rewrite OP data, confirm [7] DeltaIOPCheck for BU Laser quality.
Select [2] DriveMenu
Select [7] DeltaIOPCheck for checking. specification BD, DVD, CD; within 12
NO
The following cases need Adjustments; (1) Replace BU (MB is original) (2) Replace MB (BU is original) (3) Replace both BU and MB JIG Requirement Digital camera (recommend with macro mode) Barcode decoder (BDBUDec.exe) installed in JIG PCs USB memory ESD work bench
Iop is out of specification, replace BU to new one.
Yes
Check DriveDeviceDiag
Optical Block Check (Flowchart yy)
The Iop data is within specification, turn off the power
Turn On the Power and check the playback performance by using CD, DVD and BD.
BDP-S560
BLX-104
DVD TEST DISC: HLX-513 CD TEST DISC: YEDS-18
IFcon section flowchart (1/2) No Is the fuse (PS301) blown? To Power Supply (System) flowchart Yes Replace PS301 If symptoms do not improve, check for a short on the circuit board. No
IFcon block power supply check
UNSW3.3V voltage (+3.3 V) Is 3.3 V output from IC301 pin 4? Yes
No
Input voltage Is +5.8 V input to IC301 pin 5?
Yes
REG control voltage Is +5.8 V input to IC301 pin 1? Replace IC301 Yes
No
P_FAIL detection operation check
Replace R305 If symptoms do not improve, replace IC301.
Check the P_FAIL voltage No
Is +3.3 V output from IC1404 pin 1?
No
Replace R1465 and check for +3.3 V at IC1404 pin 1. If symptoms do not improve, replace IC1404 (P_FAIL detection).
Yes
Key Table
Main unit key check No
Check of key voltage from main unit Key Table () when key is pressed or not pressed.
No
Is the FFC from CN1404 disconnected? (Other than the POWER key)
9-6
No No Does replacement of the FL/FR board result in improvement? No Yes To FL/FR board flowchart
POWER: CN301 pin 1 KEY 0 STOP: CN1404 pin 13 KEY 1 OPEN/CLOSE: CN1404 pin 14 KEY 2 PLAY: CN1404 pin 15 KEY 3
Is the harness from CN301 disconnected? (POWER key)
Is the FL-193 harness from the power supply disconnected? (POWER key)
Yes
Is there a problem with the mounting condition of RB1401, or 1402? Is there a problem with the mounting condition of C1414, 1415, 1416, or 1417?
Remote control operation check
Check the waveform when the remote control button is not pressed.
No
Check whether the FFC is disconnected from CN1404. (Other than the POWER key)
Check of the 3.3 V voltage CN1404 pin 17, and IC1403 pin 24
Is there a problem with the RB1403 mounting condition?
Yes
Check of the waveform when the key is pressed. In comparison with a normal waveform, is the waveform of the voltage output correctly?
No
Is the remote control that is used in the inspection broken?
BDP-S560
Yes
Check whether the FFC is disconnected from CN1404. (Other than the POWER key)
IFcon section flowchart (2/2)
Check of IFcon reset input port Yes
Is the voltage of IC1403 pin 6 "H" (3.3 V)?
No
Is there a problem with the mounting condition of R1414, C1410, or R1408?
Yes
Pcont output port check
Check of each power supply control port when the power is ON
Corresponding output
IC1403 pin 20 Pcont3 IC1403 pin 21 Pcont2 IC1403 pin 28 Pcont1 IC1403 pin 31 Pcont4 IC1403 pin 32 ATAPCONT2 IC1403 pin 33 ATAPCONT2
SW3.3V output 1.05 V system output DCSW3.3V output 1.8 V system output DR_SW12V output POWER (3.3 V and 1.5 V) output
Is the voltage at the "H" level (3.3 V)? No All the ports go "H" within 2 to 10 ms, but soon go "L". Yes No
No
Check for shorts at each port Yes
Yes
Do the symptoms improve after checking the No soldering and pattern of IC1403?
9-7
SW3.3V Short circuit operation check No When IC1403 pin 20 Pcont3 has gone "H", is the SW3.3V voltage output? Yes Do the symptoms improve after checking the No mounting condition of R1439, R1442, and IC1403 pin 52? No No Do the symptoms improve after replacing IC101? No No
Power supply output check
Check the output of the corresponding voltage.
SW3.3V output 1.05 V system output DCSW3.3V output 1.8 V system output DR_SW12V output POWER (3.3 V and 1.5 V) output
No
Replace IC1403 or replace the MB board. To Drive flowchart BU Adjustment Flow [yy] ~ After BU/MB Replacement ~
Yes
Check SYS_RST signal output
Is IC1403 pin 35 "H" (3.3 V)? The mounting condition of R919 and R523 are OK.
No
Replace IC1403 and the MB board. To Drive flowchart BU Adjustment Flow [yy] ~ After BU/MB Replacement ~
Yes
Check the communication with the host CPU (SYSCON_REQ signal check) No Do cyclical "H" and "L" communication waveforms come to IC1403 pin 36?
Is there a problem with the mounting condition of R1450, or 1462?
Yes
Check the communication with the host CPU (Serial communication signal check) Replace IC1403 or replace the MB board. To Drive flowchart BU Adjustment Flow [yy] ~ After BU/MB Replacement ~
BDP-S560
Do cyclical "H" and "L" communication No waveforms come to IC1403 pins 25, 26, and 27?
Is there a problem with the mounting condition of RB1403, R1430, R937, R936, R939, or R938?
FL/FR Board flowchart (1/3) Key1 does not operate
Power button on the main unit does not work
Does symptom improve when replacing the FL board? No To IFcon section flowchart Yes Check the resistance of resistors of Key1 line. Also check the surrounding pattern.
No
Is there voltage of about 3.3V at pin 13 of CN701 without pressing the keys?
Yes
The potential of pin 1 of CN331 does No not change from 3.3V to near 0V when pressing the power button
Check pattern and S331 might be broken.
Yes
Disconnected harness or replace FL board.
Key operations cannot be made on Key2 does not operate
Does symptom improve when replacing the FR board? Yes
No
Is there voltage of about 3.3V at pin 14 of CN701 without pressing the keys?
No
Yes
9-8
Which row of keys do not operate?
Reference: Relationship of Buttons and Voltages
Check the resistance of resistors of Key2 line. Also check the surrounding pattern.
STOP buttons -> To Key1 does not operate
OPEN/CLOSE button -> To Key2 does not operate
PLAY button -> To Key3 does not operate Key3 does not operate
Is there voltage of about 3.3V at pin 15 of CN701 without pressing the keys? Yes Check the resistance of resistors of Key3 line. Also check the surrounding pattern.
No
BDP-S560
FL/FR Board flowchart (2/3) LED does not light No To "LED Switch Surrounding Check" Is there voltage of about 5.8V at PS701? Yes Is there voltage of about 5.8V at Emitter Q709 ? No Yes No Check the 3.3V line of the FR board. Is there voltage of 3.3V at Pin 43 of IC702 ? Yes No Is pin 1 and pin2 of IC702 about 3.3V? Yes Replace Q711 and Q710, if no effect then replace FR board Replace IC702. If no effect, replace the FR board. Check the "LED Switch Surround check" If NG, then replace the FR board.
FLD does not light
No
Is there voltage of about 5.8V at PS701?
To "FLD Switch Surrounding Check "
Yes
Is there voltage of about -22V at JL701?
No
Check the circuits surrounding the FLD DD CONVERTER. If NG, then replace the FR board.
Yes
No
Is there voltage of 3.3V at Pin 43 of IC702 ?
Check the 3.3V line of the FR board.
Yes
No
Is pin 5 of IC702 oscillating?
Replace IC702. If no effect, replace the FR board.
Yes
Is there input of pulse to pins 7, 8 and 9 of IC702?
No
Replace FFC between FR and MB. If no effect, then goto "IFD flow"
Yes
9-9
Is the voltage of the base of Q703 at No 3.3V? Yes Replace Q703 Yes
Check connection of FLD and IC702. Replace IC702 if OK. If no effect, replace the FL board.
FLD Switch Surrounding Check
Is the potential of pin 3 of Q704 5.8V?
No
Yes
Is the potential of the base of Q704 around 5V?
Yes
Is the collector voltage of Q703 about No 0V?
Is pin 7 of CN701 at 3.3V?
No
Replace FFC, and Check pattaern near IC1403 of MB board. Replace IC1403 or MB board if NG. To Drive flowchart BU Adjustment Flow [yy] ~ After BU/MB Replacement ~ Yes Replace the FR board
No
Replace Q704
Replace Q704
BDP-S560
FL/FR Board flowchart (3/3)
LED Switch Surrounding Check
Is the potential of pin 3 of Q709 5.8V?
No
Yes
Is the potential of the base of Q709 around 5V? Is pin 6 of CN701 at 3.3V?
Yes
Is the collector voltage of Q708 about No 0V?
Is the voltage of the base of Q708 at No 3.3V?
No
Replace FFC, and Check pattaern near IC1403 of MB board. Replace IC1403 or MB board if NG. To Drive flowchart BU Adjustment Flow [yy] ~ After BU/MB Replacement ~
No Replace Q708 Replace the FR board
Yes
Yes
Yes
Replace Q709
Replace Q709
Remote control does not operate No Replace FFC
Symptom improve when replacing FR board? Yes No Check MB pattern near IC1403
No
Are there signals to pin 17 of MB board CN1404?
Yes
9-10
Yes
Are there signals to IC1403 pin 24?
Is there output of about 3.3V for potential of CN701 pin 17?
No
Replace IC701 and check FR board pattern
Yes
Disconnected flexible harness
BDP-S560
Fan flowchart
The FAN ERR display appears on the fluorescent tube surface.
Enter the Service Mode and turn on the fan from the IFcon menu.
Is the voltage of CN1403 pin 3 on the order of 10 V? Yes Check around the fan power supply (IC1401). Yes
No
Disconnect the harness from the fan that is inserted in CN1403, and take the measurement again. Is it on the order of 10 V? No Is the voltage of IC1401pin 2 on the order of No 3.3 V?
Is the connection between IC1401 pin 1and IC1403 pin 58 broken? Also check whether the trace is bridged with the adjacent one.
Yes
No
Is the fan rotating?
Replace the fan.
Yes
Is FanState of the Service Mode screen set to ON? No
No
Disconnect the harness from the fan that is inserted in CN1403, and short pins 1 and 2 together. Does FanState of the Service Mode screen go ON? Is the connection between IC1403 pin 2 and IC1403 pin 55 broken? Also check whether the trace is bridged with the adjacent one. Yes
9-11
Yes
Check whether something is caught in the fan blades. If there is nothing there, replace the fan.
Replace the fan.
BDP-S560
Ethernet flowchart
Cannot connect with the network, cannot update the network.
Is the LAN cable plugged in properly?
No Plug in the LAN cable firmly.
Yes No Is power supplied to the MB board? Yes Replace the MB board. To Drive flowchart BU Adjustment Flow [yy] ~ After BU/MB Replacement ~ No To Power Supply (System) flowchart
Is the LED of the hub router lit? (LINK LED)
Yes
9-12
Are the network settings of the menu correct? Make the correct network settings.
No
Yes
BDP-S560
USB Device flowchart
The USB device is not recognized.
Insert the USB device again. Is it recognized when the power is turned OFF and then ON again? No Is 5 V present at C617? Yes No Yes Is 5.8 V present at C610? Power supply board defective No No Yes
No
Is 5 V present at CN361 pin 1?
Yes
Poor contact of the USB device
Defective harness between the USB board and the MB board. Yes
Does replacing IC601 improve the symptoms?
Replace the harness between the MB No board and the USB board. Do the symptoms improve? IC601 defective Yes
Defective harness between the USB board and the MB board
9-13
BDP-S560
HUB board flowchart (1/2)
(1) Does not recognize a USB device at the front panel
Insert a USB memory device to the terminal on front panel. Start the service mode. Diag>Device Test>USB Host>
No Is 3.3 V present at IC102 pin 4? Yes Is 5.8 V present at IC102 pin 2? B Yes Defective IC102. No Yes Is 3.3 V present at IC102 pin 1? A
No
No
No
Is "HUB ID check" OK?
Replace the harness for the CN103. Do the symptoms improve?
Yes
Yes
Defective harness for the CN103.
Replace the HUB board. Do the symptoms improve? C Yes Defective IC104.
No
No Replace the Front USB board. Do the symptoms improve? Is 5 V present at IC105 pin 4? Yes Yes Defective Front USB board.
No
No
No Is 3.3 V present at IC105 pin 1? Yes
No
No Replace the harness for the CN105. Do the symptoms improve? Yes Defective harness for the CN105.
Is "USB Media check" OK?
9-14
Replace the HUB board. Do the symptoms improve? Yes Defective IC104. No
Yes
Yes
No defect. Or noncompliant USB memory device.
Defective harness for the CN104.
No Is 5.8 V present at IC105 pin 2? Yes Defective IC105.
Is harness connection for CN102 OK? Yes Defective harness connection for the CN102.
No
Replace the MB board. Then perform the drive adjustment. *After replacing the MB board, perform the rewrite of Opdata and refer to the Drive flowchart.
BDP-S560
HUB board flowchart (2/2)
(2) From WLAN flow
Start the service mode. Diag>Device Test>USB Host>
No Is 3.3 V present at IC102 pin 4? Yes Is 5.8 V present at IC102 pin 2? Yes Defective IC102. No B Yes Is 3.3 V present at IC102 pin 1? A
No
No
No
Is "HUB ID check" OK?
Yes
Yes
No C
Defective harness for the CN103. Yes Defective IC104. A
Replace the HUB board. Do the symptoms improve?
9-15
No Replace the harness for the CN105. Do the symptoms improve? C Yes Defective harness for the CN105. B No No Is harness connection for CN102 OK? C Yes Defective harness connection for the CN102. No No Defective WLAN module. C
No
Is 5 V present at IC103 pin 4?
Is 3.3 V present at IC103 pin 1?
Yes
Yes
Is 5.8 V present at IC103 pin 2?
Yes
Defective IC103.
Replace the HUB board. Do the symptoms improve?
No
Replace the MB board. Do the symptoms improve?
Yes
Yes
Defective IC104.
Replace the MB board. Then perform the drive adjustment.
BDP-S560
*After replacing the MB board, perform the rewrite of Opdata and refer to the Drive flowchart.
WLAN flowchart
Is the WLAN indicator indicated on the fluoresuent tube surface?
No
Set the WLAN function enable by XMB Setup Network Setting Internet Settings Start Select Wireless
Yes
Turn off and turn on in service mode
Yes
Is MAC address of WLAN module appeared on the screen? Check as follow [1] Diag Menu Category : WirelessLAN Test (1)Show WLAN HwInfo No Correct the wiring between Hub and MB Yes
No(*1)
Is cable between Hub and MB wired correctly?
Yes
Go to HUB flow No.2
9-16
No Is it able to connect to the Access point? Check as follow [1] Diag Menu Category : WirelessLAN Test (2)Connect to AccessPoint (*2) Is Status Connected! ? Yes Defective following devices - WLAN module No
Are antennas and antenna cables connected to WLAN module correctly?
No
Connect antennas and antenna connector to WLAN module
Yes
Is it able to connect to the Access point? Check as follow [1] Diag Menu Category : WirelessLAN Test (2)Connect to AccessPoint (*2) Is Status Connected! ?
No
Replace WLAN module
Defective following devices - Antennas - Antenna cables
Yes
Setup or wiring error
BDP-S560
Notice: (*1) You may get the following message on the Diag screen Cant get WlanHwInfo! (*2) Wireless access point and svc_wlan.conf (Please see Page7-6) are needed See Parameter setup for WLAN access point and svc_wlan.conf for detail
Parameter setup for WLAN access point and svc_wlan.conf
[Devices] Following devices are required
1. WLAN access point e.g.) WRT310N(Linksys), WRT160N(Linksys), DIR-655(D-Link), WNDR3300(Netgear)
2. USB memory For svc_wlan.conf
[Parameter for WLAN access point] Following parameter should be change from default settings (See Table1)
Table1(example)
Parameter
Value
Security mode
Disable
SSID
BDP4G-SU
IP address
192.168.1.1(*1)
Subnet mask
255.255.255.0
9-17E
SVC_REGULATORY_REVISION 5 0 0
[Content of svc_wlan.conf]example
SVC_CERT SVC_COUNTRY_CODE SVC_REGULATORY_REVISION SVC_WEPKEY SVC_SSID SVC_PMK SVC_IPADDR SVC_NETMASK SVC_BROADCAST
NO-ENCRYPT (See Table2) (See Table2) abcdef1234 BDP4G-SU(*1) ABCDE12345 192.168.1.10 255.255.255.0 192.168.1.255
Note (*1) SVC_SSID must be the same value as WLAN Access point
Table2
Destination
SVC_COUNTRY_CODE
U2, CA2
US
EC1, EC2, CEK
FR
BDP-S560
AU2
NZ
SECTION 10 REPAIR PARTS LIST

10-1. EXPLODED VIEWS
NOTE: -XX and -X mean standardized parts, so they may have some difference from the original one. Color Indication of Appearance Parts Example: KNOB, BALANCE (WHITE) . . . (RED) Parts Color Cabinets Color Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The mechanical parts with no reference number in the exploded views are not supplied. Accessories and packing materials are given in the last of the electrical parts list. Abbreviation CND : Canadian model The components identified by mark or dotted line with mark are critical for safety. Replace only with part number specified. Les composants identifis par une marque sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.
BDP-S560
The components identified by mark contain confidential information. Strictly follow the instructions whenever the components are repaired and/or replaced. Les composants identifis par la marque contiennent des informations confidentielles. Suivre scrupuleusement les instructions chaque fois quun composant est remplac et / ou rpar.
10-1-1. CASE SECTION
4 2 3
7 1 5
9 (Note)
Note: Stick Sheet (Panel) [4-158-567-02] on the Front Panel. Refer below picture for position and attention. Stick tightly and no floating, peel off or cracking. Stick Sheet (Panel) On the Front Panel here. Turn around to top side. Corner R gap is OK.
No stick out from panel rib. No overlap on this rib. Gap less than 1mm.
No overlap on this rib.
No stick out from panel rib except corner R.
Ref. No. 1 2 3 4 5
Part No. X-2348-385-1 A-1726-839-A 3-070-883-71 3-710-901-71 A-1719-608-A
Description PANEL ASSY, FRONT (SU1) CASE BLOCK(SERVICE USE SOEM) SCREW, TAPPING SCREW, TAPPING ANT-001 BOARD, COMPLETE
Remark
Ref. No. 6 7 8 9
Part No. A-1719-610-A 1-836-438-11 1-836-439-11 4-158-567-02
Description
Remark
ANT-002 BOARD, COMPLETE CABLE, COAXIAL (WITH U.F.L CN) (GRAY) CABLE, COAXIAL (WITH U.F.L CN) (BLACK) SHEET (PANEL) (Note)
10-1
BDP-S560
10-1-2. FRONT/REAR CHASSIS SECTION
not supplied (+P)
not supplied not supplied (+BV3)
54
not supplied (+BV3) #1 not supplied (+BV3)
M1401 not supplied not supplied not supplied (+BV3)
not supplied not supplied (+BV3) not supplied not supplied
55
not supplied not supplied (+BV3) not supplied
53
52
56 57
not supplied (+BV3)
51
not supplied (+BV3)
chassis section
not supplied
Ref. No. 51 52 53 54 55
Part No. A-1719-598-A A-1719-600-A 1-836-488-11 3-710-901-71 1-458-129-11
Description FR-302 BOARD, COMPLETE FL-194 BOARD, COMPLETE CABLE, FLEXIBLE FLAT (FMF-004) SCREW, TAPPING CARD, WIRELESS LAN
Remark
Ref. No. 56 57 58 M1401 #1
Part No. A-1719-606-A 1-836-489-11 3-077-331-31 1-787-879-11 7-682-544-09
Description HU-012 BOARD, COMPLETE CABLE, FLEXIBLE FLAT (FMH-002) +BV3 (3-CR) FAN, D.C. +B 3X3
Remark
10-2
BDP-S560
10-1-3. MAIN CHASSIS SECTION
not supplied (+BV3)
BD section
not supplied
not supplied
not supplied
not supplied (+BV3)
not supplied (+BV3)
not supplied (+BV3)
101
not supplied
105
102
not supplied (+BV3) not supplied not supplied
not supplied (+BV3)
not supplied not supplied
104 103
The components identified by mark or dotted line with mark are critical for safety. Replace only with part number specified. Ref. No. 101 102 103 Part No. 1-474-150-51 A-1719-611-A 2-319-429-01 Description
Les composants identifis par une marque sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi. Remark Ref. No. 104 105 Part No. A-1719-604-A A-1719-602-A Description USB-017 BOARD, COMPLETE USB-016 BOARD, COMPLETE Remark
REGULATOR, SWITCHING (SRV2192U) MB-127 BOARD, COMPLETE CUSHION, FOOT
10-3
BDP-S560
10-1-4. BD SECTION
153
not supplied
not supplied
not supplied
154
not supplied not supplied
155
not supplied
151 152
The components identified by mark or dotted line with mark are critical for safety. Replace only with part number specified. Ref. No. 151 152 153 Part No. A-1727-332-A 4-137-203-01 3-087-053-11 Description LOADING FOR SERVICE HOLDER, FFC +BVTP2.6 (3CR) Remark Ref. No. 154 155 Part No. 1-836-504-11 8-820-424-02 Description
Les composants identifis par une marque sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi. Remark
CABLE, FLEXIBLE FLAT DEVICE,OPTICAL KEM-430AAA/C2RP
10-4
BDP-S560
10-1-5. ACCESSORIES
151
Remote Commander (RMT-B104A)
152
AC Power Cord
153
Audio/Video Cable (Phono Plug x3)
The components identified by mark or dotted line with mark are critical for safety. Replace only with part number specified. Ref. No. 201 202 203 Part No. 1-487-218-11 1-823-701-11 1-828-145-11 Description REMOTE COMMANDER (RMT-B104A) CORD, POWER CORD, CONNECTION (AV) Remark Ref. No. * * Part No. 4-145-643-11 4-145-643-21 Description
Les composants identifis par une marque sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi. Remark
MANUAL, INSTRUCTION (ENGLISH) MANUAL, INSTRUCTION (FRENCH) (CND)
10-5
BDP-S560 ANT-001
10-2. ELECTRICAL PARTS LIST
NOTE: Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. -XX and -X mean standardized parts, so they may have some difference from the original one. RESISTORS All resistors are in ohms. METAL: Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F: nonflammable Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. SEMICONDUCTORS In each case, u: , for example: uA. . : A. . uPA. . : PA. . uPB. . : PB. . uPC. . : PC. . uPD. . : PD. . CAPACITORS uF: F COILS uH: H The components identified by mark or dotted line with mark are critical for safety. Replace only with part number specified. Les composants identifis par une marque sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi. Remark Ref. No. Part No. Description < CONNECTOR > CN701 1-793-806-51 CONNECTOR, FFC/FPC 17P < DIODE > D703 D704 D705 D706 D707 * D709 < CONNECTOR > D710 CN301 1-818-381-11 CONNECTOR, COAXIAL < IC > A-1719-600-A FL-194 BOARD, COMPLETE ********************** (Ref. No. 20,000 Series) < CONNECTOR > L701 CN331 1-770-160-21 PIN, CONNECTOR (PC BOARD) 2P < FLUORESCENT INDICATOR TUBE > < SWITCH > ND701 S331 1-771-410-21 SWITCH, TACTILE (I/1) < IC LINK > A-1719-598-A FR-302 BOARD, COMPLETE ********************** (Ref. No. 20,000 Series) < CAPACITOR > C701 C703 C704 C707 C711 C712 C713 C714 C715 C716 C717 C719 1-115-339-11 1-117-681-11 1-137-765-21 1-107-726-91 1-115-339-11 1-128-131-11 1-115-339-11 1-107-726-91 1-107-726-91 1-115-339-11 1-164-217-11 1-100-909-11 CERAMIC CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 100uF 47uF 0.01uF 0.1uF 22uF 0.1uF 0.01uF 0.01uF 0.1uF 150PF 10uF 10% 20% 20% 10% 10% 20% 10% 10% 10% 10% 5% 10% 50V 16V 16V 16V 50V 50V 50V 16V 16V 50V 50V 6.3V 0 PS701 1-576-122-21 IC LINK < TRANSISTOR > Q703 Q704 Q705 Q706 Q707 Q708 Q709 Q710 Q711 8-729-421-19 8-729-904-87 8-729-904-87 8-729-901-88 8-729-901-88 8-729-421-19 8-729-421-19 8-729-421-19 8-729-421-19 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR < RESISTOR > R701 R705 R707 R712 1-216-833-11 1-216-821-11 1-216-828-11 1-216-825-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP 10K 1K 3.9K 2.2K 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W UN2213 2SB1197K-R 2SB1197K-R 2SC2411K-CR 2SC2411K-CR UN2213 UN2213 UN2213 UN2213 0.4A 72V 1-483-097-11 INDICATOR TUBE, FLUORESCENT 1-411-919-11 INDUCTOR 100uH IC701 IC702 6-600-665-01 6-701-729-01 IC GP1UE27XK0VF IC PT6315 < COIL > 6-501-358-01 8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61 6-501-726-01 6-502-466-01 DIODE DIODE DIODE DIODE DIODE 1SS355TE-17 1SS355TE-17 1SS355TE-17 1SS355TE-17 MAZ8047GMLS0 Remark When indicating parts by reference number, please include the board. The components identified by mark contain confidential information. Strictly follow the instructions whenever the components are repaired and/or replaced. Les composants identifis par la marque contiennent des informations confidentielles. Suivre scrupuleusement les instructions chaque fois quun composant est remplac et / ou rpar.
ANT-002
FL-194
FR-302
Ref. No.
Part No. A-1719-608-A
Description
ANT-001 BOARD, COMPLETE *********************** (Ref. No. 20,000 Series) < CONNECTOR >
CN201
1-818-381-11
CONNECTOR, COAXIAL
A-1719-610-A
ANT-002 BOARD, COMPLETE *********************** (Ref. No. 20,000 Series)
LED CL-270S-WS-SD-TS (BLU-LAY DISC INDICATOR) LED CL-197HG5-CD-T (WLAN)
10-6
BDP-S560 FR-302
Ref. No. R714 R715 R717 R718 R719 R720 R721 R723 R724 R725 Part No. 1-216-829-11 1-216-845-11 1-216-814-11 1-216-829-11 1-216-825-11 1-216-812-11 1-216-825-11 1-216-813-11 1-216-833-11 1-216-805-11 Description METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP < SWITCH > S701 S702 S704 1-771-410-21 1-771-410-21 1-771-410-21 SWITCH, TACTILE (Z) SWITCH, TACTILE (x) SWITCH, TACTILE (N) < TRANSFORMER > < RESISTOR > * T701 1-445-447-11 TRANSFORMER, DC-DC CONVERTER R108 R109 R110 R111 R112 R118 R119 R120 R123 R124 R125 R126 R128 R130 R145 R146 R147 R150 R159 R160 R162 1-208-683-11 1-208-933-11 1-208-911-11 1-208-911-11 1-208-911-11 1-218-977-11 1-208-709-11 1-218-989-11 1-218-990-81 1-218-990-81 1-218-977-11 1-218-977-11 1-218-977-11 1-218-977-11 1-208-933-11 1-208-715-11 1-216-864-11 1-208-884-81 1-216-833-11 1-216-833-11 1-218-990-81 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP < VIBRATOR > X101 1-813-082-11 VIBRATOR, CRYSTAL (24MHz) 1K 82K 10K 10K 10K 100K 12K 1M 0 0 100K 100K 100K 100K 82K 22K 0 750 10K 10K 0 0.5% 0.5% 0.5% 0.5% 0.5% 5% 0.5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W L101 L102 L103 L104 1-457-223-11 1-457-223-11 1-414-843-21 1-414-843-21 4.7K 100K 270 4.7K 2.2K 180 2.2K 220 10K 47 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Remark 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W Ref. No. D109 D110 D111 Part No. 6-501-817-01 6-501-817-01 6-501-817-01 Description DIODE MA2J1110GLS0 DIODE MA2J1110GLS0 DIODE MA2J1110GLS0 < FERRITE BEAD > FB101 1-400-382-11 EMI FERRITE (SMD) (1608) < IC > IC102 IC103 6-712-613-01 6-712-613-01 IC SI-3010KM-TLS IC SI-3010KM-TLS < COIL > COMMON MODE CHOKE COIL COMMON MODE CHOKE COIL INDUCTOR 18nH INDUCTOR 18nH
HU-012
MB-127
Remark
A-1719-606-A
HU-012 BOARD, COMPLETE ********************** (Ref. No. 20,000 Series) < CAPACITOR >
C104 C105 C107 C109 C111 C112 C113 C114 C115 * C116 C117 C118 C119 C121 C122 C123 C124 C125 C126 * C127 C128 C129 C130 C132 C143 C146
1-137-893-11 1-137-893-11 1-100-766-21 1-100-766-21 1-165-908-11 1-137-893-11 1-164-852-11 1-164-852-11 1-100-916-11 1-112-298-91 1-100-916-11 1-100-916-11 1-112-300-91 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-112-298-91 1-165-492-21 1-128-394-11 1-165-492-21 1-100-916-11 1-125-777-11 1-165-908-11
ELECT CHIP ELECT CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP < CONNECTOR >
22uF 22uF 47uF 47uF 1uF 22uF 12PF 12PF 0.1uF 1uF 0.1uF 0.1uF 4.7uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 1uF 100uF 220uF 100uF 0.1uF 0.1uF 1uF
20% 20% 20% 20% 10% 20% 5% 5% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 20% 20% 10% 10% 10%
16V 16V 16V 16V 10V 16V 50V 50V 16V 16V 16V 16V 10V 16V 16V 16V 16V 16V 16V 16V 9 10V 10V 10V 16V 10V 10V
5% 5% 5% 5% 0.5% 0.5% 0.5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/10W
A-1719-611-A
MB-127 BOARD, COMPLETE ********************** (Ref. No. 10,000 Series) < CAPACITOR >
C102 C103 C105 C106 C107 C109 C110 C112 C113 C115 C116
1-100-916-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-916-11 1-100-916-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.1uF 0.1uF
10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10%
16V 50V 50V 50V 50V 50V 50V 50V 50V 16V 16V
CN102 CN103 CN104
1-573-290-21 1-573-768-61 1-573-768-41
PIN, CONNECTOR (1.5MM) (SMD) 4P PIN, CONNECTOR (1.5MM) (SMD) 5P PIN, CONNECTOR (1.5MM) (SMD) 5P < DIODE >
D106 D107
6-500-701-01 6-500-701-01
DIODE PGB1010603NR DIODE PGB1010603NR
10-7
BDP-S560 MB-127
Ref. No. C117 C118 C119 C120 C122 C125 C128 C130 C132 C133 C134 C135 C136 C137 C139 C141 C144 C145 C146 C147 C149 C152 C153 C154 C155 C157 C158 C159 C161 C163 C165 C166 C168 C170 C174 C202 C203 C204 C205 C206 C207 C208 C211 C212 C213 C214 C215 C216 C222 C223 C225 C227 C231 C232 C234 C235 C237 C238 C239 C240 Part No. 1-100-916-11 1-100-916-11 1-112-717-91 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-909-11 1-100-916-11 1-112-717-91 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-909-11 1-100-916-11 1-100-567-81 1-100-567-81 1-100-567-81 1-100-567-81 1-100-567-81 1-112-717-91 1-112-717-91 1-112-717-91 1-112-717-91 1-100-567-81 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-112-717-91 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-909-11 1-100-916-11 1-112-717-91 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 1uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 10uF 0.1uF 1uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 10uF 0.1uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 1uF 1uF 1uF 1uF 0.01uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 1uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 10uF 0.1uF 1uF 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% Remark 16V 16V 6.3V 50V 50V 50V 50V 50V 50V 50V 50V 6.3V 16V 6.3V 50V 50V 50V 50V 50V 50V 50V 50V 6.3V 16V 25V 25V 25V 25V 25V 6.3V 6.3V 6.3V 6.3V 25V 16V 16V 16V 16V 16V 16V 50V 50V 50V 50V 50V 50V 50V 50V 6.3V 50V 50V 50V 50V 50V 50V 50V 50V 6.3V 16V 6.3V Ref. No. C241 C245 C246 C247 C248 C249 C251 C255 C256 C257 C258 C261 C262 C263 C265 C267 C268 C270 C276 C277 C278 C301 C302 C303 C305 C306 C313 C315 C316 C322 * C328 C329 * C331 C332 C336 C337 C338 * C339 C343 C344 C345 C346 C349 C350 * C352 C355 C357 C358 C361 C362 C366 C369 C376 * C379 C392 C395 C396 C397 C398 C399 Part No. 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-905-11 1-100-909-11 1-100-916-11 1-100-567-81 1-100-567-81 1-100-567-81 1-100-567-81 1-112-717-91 1-112-717-91 1-112-717-91 1-112-717-91 1-100-567-81 1-100-567-81 1-100-916-11 1-100-909-11 1-100-909-11 1-100-916-11 1-100-909-11 1-100-909-11 1-115-467-11 1-100-567-81 1-115-467-11 1-135-960-91 1-112-298-91 1-112-300-91 1-112-298-91 1-112-300-91 1-135-960-91 1-100-567-81 1-107-819-11 1-112-298-91 1-100-916-11 1-112-300-91 1-100-159-91 1-100-159-91 1-100-916-11 1-100-672-11 1-112-298-91 1-112-300-91 1-100-916-11 1-100-916-11 1-114-532-21 1-114-532-21 1-100-159-91 1-112-776-11 1-100-159-91 1-112-298-91 1-100-916-11 1-100-916-11 1-164-936-11 1-112-775-11 1-164-936-11 1-112-775-11 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 10uF 0.1uF 0.01uF 0.01uF 0.01uF 0.01uF 1uF 1uF 1uF 1uF 0.01uF 0.01uF 0.1uF 10uF 10uF 0.1uF 10uF 10uF 0.22uF 0.01uF 0.22uF 10uF 1uF 4.7uF 1uF 4.7uF 10uF 0.01uF 0.022uF 1uF 0.1uF 4.7uF 22uF 22uF 0.1uF 10uF 1uF 4.7uF 0.1uF 0.1uF 330uF 330uF 22uF 0.0047uF 22uF 1uF 0.1uF 0.1uF 680PF 0.0022uF 680PF 0.0022uF 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 10% 10% 10% 10% 20% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% Remark 50V 50V 50V 50V 50V 50V 50V 50V 6.3V 16V 25V 25V 25V 25V 6.3V 6.3V 6.3V 6.3V 25V 25V 16V 6.3V 6.3V 16V 6.3V 6.3V 10V 25V 10V 25V 16V 10V 16V 10V 25V 25V 16V 16V 16V 10V 6.3V 6.3V 16V 16V 16V 10V 16V 16V 4V 4V 6.3V 50V 6.3V 16V 16V 16V 50V 50V 50V 50V
10-8
BDP-S560 MB-127
Ref. No. C402 C403 C404 C405 C406 C407 C408 C409 C410 C411 C413 C414 C415 C416 C417 C418 C419 C420 C421 C422 C423 C425 C427 C428 C429 C430 C431 C432 C433 C434 C435 C436 C437 C440 C441 C442 C443 C511 C513 C514 C517 C602 C603 C604 C605 C606 C607 C608 * C609 C610 * C613 C617 C618 C619 C624 C704 C706 C707 C708 C709 Part No. 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-164-847-11 1-164-847-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-909-11 1-100-909-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-567-81 1-165-884-11 1-100-916-11 1-100-905-11 1-165-884-11 1-100-916-11 1-164-848-11 1-164-848-11 1-112-298-91 1-128-993-21 1-112-298-91 1-128-394-11 1-100-966-91 1-100-966-91 1-100-567-81 1-100-567-81 1-115-467-11 1-100-916-11 1-165-887-91 1-100-567-81 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 7PF 7PF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 10uF 10uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.01uF 2.2uF 0.1uF 0.001uF 2.2uF 0.1uF 8PF 8PF 1uF 22uF 1uF 220uF 10uF 10uF 0.01uF 0.01uF 0.22uF 0.1uF 0.22uF 0.01uF 10% 10% 10% 10% 10% 10% 10% 10% 10% 0.5PF 0.5PF 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 0.5PF 0.5PF 10% 20% 10% 20% 20% 20% 10% 10% 10% 10% 10% 10% Remark 16V 16V 16V 16V 16V 16V 16V 16V 16V 50V 50V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 6.3V 6.3V 16V 16V 16V 16V 16V 25V 6.3V 16V 50V 6.3V 16V 50V 50V 16V 10V 16V 10V 10V 10V 25V 25V 10V 16V 6.3V 25V Ref. No. C712 C713 C722 C738 C747 C757 C758 C759 C760 C762 C801 C802 C803 C804 C805 C807 C810 C812 C813 C814 C815 C817 C818 C819 C821 C824 C826 C828 * C829 C830 C831 C833 C834 C835 C840 C841 C842 C843 C844 C845 C846 C847 C848 C849 C850 C851 C852 C853 C855 C856 C858 C859 C862 C864 C865 C867 C869 C905 C1101 C1106 Part No. 1-100-916-11 1-100-916-11 1-100-916-11 1-100-567-81 1-100-567-81 1-115-467-11 1-100-916-11 1-100-567-81 1-115-467-11 1-100-567-81 1-112-717-91 1-100-916-11 1-100-916-11 1-112-717-91 1-100-916-11 1-100-916-11 1-137-765-21 1-100-916-11 1-100-672-11 1-100-916-11 1-100-905-11 1-100-567-81 1-100-909-11 1-112-717-91 1-112-717-91 1-100-905-11 1-165-887-91 1-100-909-11 1-112-298-91 1-100-905-11 1-137-765-21 1-112-717-91 1-137-765-21 1-112-717-91 1-100-916-11 1-100-740-81 1-100-740-81 1-100-916-11 1-100-905-11 1-100-905-11 1-100-916-11 1-100-740-81 1-100-740-81 1-100-916-11 1-137-765-21 1-100-905-11 1-137-765-21 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-137-765-21 1-100-916-11 1-100-916-11 1-100-916-11 1-137-765-21 1-100-916-11 1-100-567-81 1-107-819-11 1-100-567-81 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.01uF 0.01uF 0.22uF 0.1uF 0.01uF 0.22uF 0.01uF 1uF 0.1uF 0.1uF 1uF 0.1uF 0.1uF 47uF 0.1uF 10uF 0.1uF 0.001uF 0.01uF 10uF 1uF 1uF 0.001uF 0.22uF 10uF 1uF 0.001uF 47uF 1uF 47uF 1uF 0.1uF 390PF 390PF 0.1uF 0.001uF 0.001uF 0.1uF 390PF 390PF 0.1uF 47uF 0.001uF 47uF 0.1uF 0.1uF 0.1uF 0.1uF 47uF 0.1uF 0.1uF 0.1uF 47uF 0.1uF 0.01uF 0.022uF 0.01uF 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 10% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 10% 20% 10% 10% 5% 5% 10% 10% 10% 10% 5% 5% 10% 20% 10% 20% 10% 10% 10% 10% 20% 10% 10% 10% 20% 10% 10% 10% 10% Remark 16V 16V 16V 25V 25V 10V 16V 25V 10V 25V 6.3V 16V 16V 6.3V 16V 16V 16V 16V 16V 16V 50V 25V 6.3V 6.3V 6.3V 50V 6.3V 6.3V 16V 50V 16V 6.3V 16V 6.3V 16V 50V 50V 16V 50V 50V 16V 50V 50V 16V 16V 50V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 25V 16V 25V
10-9
BDP-S560 MB-127
Ref. No. C1107 C1108 C1109 C1110 C1111 C1112 C1113 C1114 C1115 C1116 C1117 C1118 C1119 C1203 C1208 C1209 C1210 C1215 C1222 C1223 C1224 C1231 C1233 C1245 C1252 C1253 C1254 C1255 C1256 C1257 C1258 C1259 C1261 C1262 C1263 C1264 C1265 C1266 C1267 C1268 C1271 C1272 C1273 C1279 C1281 C1282 C1286 C1287 C1288 C1289 C1293 C1295 C1301 C1303 C1305 C1310 C1311 C1314 C1315 C1316 Part No. 1-100-567-81 1-100-567-81 1-100-567-81 1-127-760-11 1-100-567-81 1-100-567-81 1-100-567-81 1-127-760-11 1-100-916-11 1-100-567-81 1-100-567-81 1-100-909-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-128-993-21 1-100-905-11 1-100-916-11 1-100-905-11 1-100-916-11 1-128-993-21 1-100-916-11 1-100-567-81 1-164-874-11 1-164-874-11 1-100-567-81 1-100-567-81 1-164-874-11 1-164-874-11 1-112-717-91 1-100-905-11 1-100-905-11 1-112-717-91 1-112-717-91 1-117-681-11 1-100-905-11 1-100-905-11 1-112-717-91 1-100-905-11 1-117-681-11 1-100-905-11 1-100-905-11 1-112-746-11 1-112-746-11 1-100-909-11 1-165-884-11 1-112-746-11 1-164-849-11 1-100-567-81 1-100-567-81 1-100-567-81 1-100-909-11 1-100-905-11 1-100-905-11 1-100-567-81 1-100-567-81 1-112-746-11 1-100-909-11 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 4.7uF 0.01uF 0.01uF 0.01uF 4.7uF 0.1uF 0.01uF 0.01uF 10uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 22uF 0.001uF 0.1uF 0.001uF 0.1uF 22uF 0.1uF 0.01uF 100PF 100PF 0.01uF 0.01uF 100PF 100PF 1uF 0.001uF 0.001uF 1uF 1uF 100uF 0.001uF 0.001uF 1uF 0.001uF 100uF 0.001uF 0.001uF 4.7uF 4.7uF 10uF 2.2uF 4.7uF 9PF 0.01uF 0.01uF 0.01uF 10uF 0.001uF 0.001uF 0.01uF 0.01uF 4.7uF 10uF 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 10% 10% 10% 10% 20% 10% 10% 5% 5% 10% 10% 5% 5% 10% 10% 10% 10% 10% 20% 10% 10% 10% 10% 20% 10% 10% 10% 10% 10% 10% 10% 0.5PF 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% Remark 25V 25V 25V 6.3V 25V 25V 25V 6.3V 16V 25V 25V 6.3V 16V 16V 16V 16V 16V 10V 50V 16V 50V 16V 10V 16V 25V 50V 50V 25V 25V 50V 50V 6.3V 50V 50V 6.3V 6.3V 16V 50V 50V 6.3V 50V 16V 50V 50V 6.3V 6.3V 6.3V 6.3V 6.3V 50V 25V 25V 25V 6.3V 50V 50V 25V 25V 6.3V 6.3V Ref. No. C1321 C1326 C1328 C1329 C1331 C1332 C1335 C1350 C1351 C1353 C1356 C1359 C1361 C1369 C1370 C1371 C1372 C1374 C1375 C1376 C1377 C1378 C1382 C1384 C1385 C1386 C1387 C1389 C1393 C1394 C1395 C1401 C1402 C1407 C1408 C1409 C1410 C1411 C1412 C1413 C1414 C1415 C1416 C1417 C1419 C1420 C4201 C4203 C4205 C4207 C4209 C4220 C4221 C4225 C4226 C4227 C4228 C4230 C4235 C4237 Part No. 1-100-567-81 1-100-567-81 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-567-81 1-117-681-11 1-100-916-11 1-100-567-81 1-107-819-11 1-100-916-11 1-112-717-91 1-112-746-11 1-114-808-11 1-100-916-11 1-100-916-11 1-164-874-11 1-164-874-11 1-100-909-11 1-100-567-81 1-100-909-11 1-100-909-11 1-100-567-81 1-100-567-81 1-114-411-21 1-114-411-21 1-119-923-11 1-100-567-81 1-100-909-11 1-112-775-11 1-100-591-91 1-100-591-91 1-100-909-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-916-11 1-100-567-81 1-100-567-81 1-100-567-81 1-100-916-11 1-100-916-11 1-100-905-11 1-100-916-11 1-100-905-11 1-100-905-11 1-112-717-91 1-100-909-11 1-100-916-11 1-100-905-11 1-100-905-11 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.1uF 0.1uF 0.1uF 0.1uF 0.01uF 100uF 0.1uF 0.01uF 0.022uF 0.1uF 1uF 4.7uF 0.033uF 0.1uF 0.1uF 100PF 100PF 10uF 0.01uF 10uF 10uF 0.01uF 0.01uF 0.33uF 0.33uF 0.047uF 0.01uF 10uF 0.0022uF 1uF 1uF 10uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.01uF 0.01uF 0.01uF 0.1uF 0.1uF 0.001uF 0.1uF 0.001uF 0.001uF 1uF 10uF 0.1uF 0.001uF 0.001uF 10% 10% 10% 10% 10% 10% 10% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 5% 5% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% Remark 25V 25V 16V 16V 16V 16V 25V 16V 16V 25V 16V 16V 6.3V 6.3V 16V 16V 16V 50V 50V 6.3V 25V 6.3V 6.3V 25V 25V 6.3V 6.3V 10V 25V 6.3V 50V 25V 25V 6.3V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 25V 25V 25V 16V 16V 50V 16V 50V 50V 6.3V 6.3V 16V 50V 50V
10-10
BDP-S560 MB-127
Ref. No. C4245 C4246 C4247 C4250 C4252 C4253 C4262 C4263 C4264 C4265 C4266 C4268 C4272 C4273 C4274 C4276 C4282 C4283 C4284 C4285 C4286 C4287 C4292 C4293 C4294 C4295 Part No. 1-164-874-11 1-164-874-11 1-164-874-11 1-100-567-81 1-100-916-11 1-114-214-81 1-100-567-81 1-100-567-81 1-100-567-81 1-100-567-81 1-100-567-81 1-100-567-81 1-100-567-81 1-100-567-81 1-100-567-81 1-100-567-81 1-100-567-81 1-100-567-81 1-100-905-11 1-100-567-81 1-100-567-81 1-112-717-91 1-100-567-81 1-100-567-81 1-100-905-11 1-100-966-91 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP < CONNECTOR > CN301 CN302 CN601 CN602 CN702 CN801 CN902 CN1101 CN1402 CN1403 1-816-587-21 1-573-290-21 1-573-768-61 1-573-768-21 1-821-450-12 1-573-768-21 1-573-806-21 1-819-875-31 1-580-756-21 1-691-550-11 PIN, CONNECTOR (PC BOARD) 15P PIN, CONNECTOR (1.5MM) (SMD) 4P PIN, CONNECTOR (1.5MM) (SMD) 5P PIN, CONNECTOR (1.5MM) (SMD) 5P CONNECTOR, HDMI (HDMI OUT) PIN, CONNECTOR (1.5MM) (SMD) 5P PIN, CONNECTOR (1.5MM) (SMD) 6P ETHERNET CONNECTOR (8P) (LAN (100)) PIN, CONNECTOR (SMD) 7P PIN, CONNECTOR (1.5MM) (SMD) 3P CONNECTOR, FFC/FPC 17P CONNECTOR, FFC/FPC 18P < DIODE > D301 D303 D304 D307 D308 D601 D602 D603 D604 D605 D802 D803 * D806 * D807 * D808 * D809 * D810 * D811 8-719-081-67 6-502-248-01 6-502-248-01 8-719-081-67 6-501-724-01 6-501-817-01 6-500-701-01 6-500-701-01 6-500-701-01 6-500-701-01 6-501-817-01 6-500-335-01 6-501-930-01 6-501-930-01 6-501-930-01 6-501-930-01 6-501-930-01 6-501-930-01 DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE M1FM3 KDZTR3.9B KDZTR3.9B M1FM3 MAZ8047G0LS0 MA2J1110GLS0 PGB1010603NR PGB1010603NR PGB1010603NR PGB1010603NR MA2J1110GLS0 MC2838-T112-1 MAZW068HGLS0 MAZW068HGLS0 MAZW068HGLS0 100PF 100PF 100PF 0.01uF 0.1uF 470PF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.001uF 0.01uF 0.01uF 1uF 0.01uF 0.01uF 0.001uF 10uF 5% 5% 5% 10% 10% 5% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% Remark 50V 50V 50V 25V 16V 50V 25V 25V 25V 25V 25V 25V 25V 25V 25V 25V 25V 25V 50V 25V 25V 6.3V 25V 25V 50V 10V Ref. No. Part No. Description < FERRITE BEAD > FB101 FB201 FB301 FB302 FB303 FB401 FB601 FB1101 FB1102 FB1103 1-400-794-21 1-400-794-21 1-400-794-21 1-400-794-21 1-400-794-21 1-400-794-21 1-400-794-21 1-400-382-11 1-400-382-11 1-400-382-11 EMI FERRITE (SMD) (1608) EMI FERRITE (SMD) (1608) EMI FERRITE (SMD) (1608) EMI FERRITE (SMD) (1608) EMI FERRITE (SMD) (1608) EMI FERRITE (SMD) (1608) EMI FERRITE (SMD) (1608) EMI FERRITE (SMD) (1608) EMI FERRITE (SMD) (1608) EMI FERRITE (SMD) (1608) < FLUORESCENT INDICATOR TUBE > FL303 FL304 FL305 FL307 FL308 1-234-986-11 1-234-939-21 1-234-939-21 1-234-986-11 1-234-986-11 FILTER, EMI REMOVAL (1608SMD) FILTER, EMI REMOVAL (SMD) FILTER, EMI REMOVAL (SMD) FILTER, EMI REMOVAL (1608SMD) FILTER, EMI REMOVAL (1608SMD) < IC > IC301 IC304 IC601 IC703 IC704 IC705 IC802 IC804 IC805 IC806 IC807 IC808 IC1101 IC1351 IC1401 IC1403 6-711-237-01 6-705-337-01 6-712-613-01 6-706-487-01 6-702-302-01 6-705-337-01 6-711-237-01 6-702-630-01 6-711-237-01 8-759-667-17 8-759-100-96 6-713-907-01 6-712-663-11 6-713-929-01 6-708-762-01 6-808-722-01 IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC NJM2878F3-33 (TE2) TK11150CSCL-G SI-3010KM-TLS TC7SH08FU (T5RSOYJF) TK11133CSCL-G TK11150CSCL-G NJM2878F3-33 (TE2) AK4382AVTN-E2 NJM2878F3-33 (TE2) L79M05TLL-SONY-TL-E uPC4558G2 NJM2564BV (TE2) LAN8700C-AEZG-CTI BD35630HFV-TR PQ200WNA1ZPH Remark
IC R5F212A7SNA18FP < COIL >
CN1404 1-820-116-51 CN4201 1-794-343-51
L302 L304 L601 L602 L603 L604 L605 L607 L608 L609 L705 L706 L707 L708 L1287
1-481-246-11 1-400-789-21 1-400-180-21 1-400-180-21 1-414-843-21 1-414-843-21 1-457-223-11 1-414-843-21 1-414-843-21 1-457-223-11 1-457-374-21 1-457-374-21 1-457-374-21 1-457-374-21 1-400-789-21
INDUCTOR 2.2uH INDUCTOR 2.2uH INDUCTOR, EMI FERRITE (1608) INDUCTOR, EMI FERRITE (1608) INDUCTOR 18nH INDUCTOR 18nH COMMON MODE CHOKE COIL INDUCTOR 18nH INDUCTOR 18nH COMMON MODE CHOKE COIL COMMOM MODE CHOKE COIL COMMOM MODE CHOKE COIL COMMOM MODE CHOKE COIL COMMOM MODE CHOKE COIL INDUCTOR 2.2uH < FUSE >
DIODE MAZW068HGLS0 DIODE MAZW068HGLS0 DIODE MAZW068HGLS0
0 PS301 0 PS303 0 PS304 0 PS802 0 PS803
1-523-095-31 1-523-095-31 1-523-094-31 1-523-093-31 1-523-074-31
FUSE FUSE FUSE FUSE FUSE
3.15A 3.15A 2A 0.5A 1A
32V 32V 50V 50V 32V
10-11
BDP-S560 MB-127
Ref. No. 0 PS804 Part No. 1-523-074-31 Description FUSE < TRANSISTOR > Q301 Q302 Q303 Q304 Q305 Q306 Q307 Q308 Q309 Q702 Q801 Q805 Q806 Q809 Q812 Q813 Q818 Q1408 6-552-024-01 6-550-663-01 6-552-024-01 6-550-663-01 8-729-028-96 6-551-456-01 6-551-690-01 6-551-690-01 8-729-028-96 6-551-714-01 8-729-620-07 8-729-028-73 8-729-029-14 8-729-620-07 6-551-696-01 8-729-028-83 8-729-027-52 6-551-690-01 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR < RESISTOR > R103 R104 R108 R109 R110 R111 R115 R116 R117 R118 R121 R123 R124 R125 R127 R128 R203 R204 R207 R208 R210 R211 R212 R213 R217 R218 R219 R220 R223 R225 R226 R227 R229 R230 R301 R303 1-208-683-11 1-208-683-11 1-218-943-11 1-218-943-11 1-218-943-11 1-218-943-11 1-218-929-11 1-218-929-11 1-218-929-11 1-218-929-11 1-218-941-81 1-208-683-11 1-208-683-11 1-218-941-81 1-208-683-11 1-208-683-11 1-208-683-11 1-208-683-11 1-208-663-11 1-208-663-11 1-218-943-11 1-218-943-11 1-218-943-11 1-218-943-11 1-218-929-11 1-218-929-11 1-218-929-11 1-218-929-11 1-218-941-81 1-208-683-11 1-208-683-11 1-218-941-81 1-208-683-11 1-208-683-11 1-218-953-11 1-218-953-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 1K 1K 150 150 150 150 10 10 10 10 100 1K 1K 100 1K 1K 1K 1K 150 150 150 150 150 150 10 10 10 10 100 1K 1K 100 1K 1K 1K 1K 0.5% 0.5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 0.5% 0.5% 5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 0.5% 0.5% 5% 0.5% 0.5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W RRH070N03TB1 RSS100N03FD5TB RRH070N03TB1 RSS100N03FD5TB DTC114EUA-T106 RTR020P02TL RT3N11M-TP-1 RT3N11M-TP-1 DTC114EUA-T106 INK0001AC1-T112A-1 2SC3052EF-T1-LEF DTA114EUA-T106 DTC144EUA-T106 2SC3052EF-T1-LEF ISA1235AC1TP-1EF DTA124EUA-T106 DTC124EKA-T146 RT3N11M-TP-1 1A 32V Remark Ref. No. R304 R305 R309 R312 R314 R315 R316 R317 R318 R319 R320 R321 R322 R323 R324 R325 R331 R334 R338 R339 R345 R349 R352 R353 R355 R356 R357 R363 R364 R365 R369 R370 R371 R372 R373 R374 R405 R407 R409 R506 R510 R512 R514 R515 R517 R519 R523 R525 R526 R527 R550 R551 R556 R558 R559 R560 R561 R563 R565 R566 Part No. 1-218-953-11 1-218-953-11 1-218-953-11 1-218-973-11 1-218-953-11 1-208-697-11 1-208-687-11 1-208-711-11 1-208-909-11 1-208-939-11 1-218-947-11 1-218-973-11 1-208-939-11 1-208-703-11 1-218-929-11 1-208-683-11 1-208-911-11 1-208-911-11 1-218-953-11 1-218-970-11 1-218-947-11 1-208-695-11 1-218-953-11 1-208-671-11 1-208-911-11 1-216-815-11 1-218-953-11 1-216-815-11 1-216-815-11 1-218-953-11 1-218-965-11 1-218-953-11 1-218-951-11 1-218-977-11 1-218-977-11 1-218-951-11 1-218-947-11 1-218-933-11 1-218-945-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-935-11 1-218-959-11 1-218-941-81 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 Description METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 1K 1K 1K 47K 1K 3.9K 1.5K 15K 8.2K 150K 330 47K 150K 6.8K 10 1K 10K 10K 1K 27K 330 3.3K 1K 330 10K 330 1K 330 330 1K 10K 1K 680 100K 100K 680 330 22 220 10K 10K 10K 10K 10K 33 3.3K 100 10K 10K 10K 10K 10K 10K 10K 10K 10K 10K 10K 10K 10K 5% 5% 5% 5% 5% 0.5% 0.5% 0.5% 0.5% 0.5% 5% 5% 0.5% 0.5% 5% 0.5% 0.5% 0.5% 5% 5% 5% 0.5% 5% 0.5% 0.5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Remark 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/16W 1/10W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
10-12
BDP-S560 MB-127
Ref. No. R601 R602 R603 R604 R605 R606 R607 R609 R610 R611 R615 R616 R617 R618 R621 R630 R631 R632 R635 R637 R638 R639 R711 R712 R723 R724 R725 R728 R729 R730 R732 R733 R734 R737 R738 R739 R740 R741 R801 R802 R803 R804 R805 R806 R807 R808 R812 R813 R814 R816 R817 R818 R819 R820 R821 R822 R823 R824 R825 R826 Part No. 1-218-936-11 1-218-936-11 1-208-688-11 1-218-936-11 1-218-936-11 1-218-965-11 1-218-965-11 1-218-952-11 1-218-967-11 1-218-967-11 1-218-965-11 1-208-691-11 1-208-721-11 1-208-911-11 1-218-990-81 1-216-833-11 1-218-967-11 1-218-967-11 1-218-941-81 1-218-990-81 1-218-990-81 1-216-295-91 1-218-865-11 1-218-841-11 1-218-967-11 1-218-959-11 1-218-959-11 1-218-973-11 1-218-961-11 1-218-959-11 1-218-967-11 1-218-956-11 1-218-956-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-218-965-11 1-218-953-11 1-218-953-11 1-218-953-11 1-218-937-11 1-218-937-11 1-218-937-11 1-218-937-11 1-218-939-11 1-218-939-11 1-218-939-11 1-218-935-11 1-218-945-11 1-218-939-11 1-208-663-11 1-208-663-11 1-208-883-81 1-208-663-11 1-208-663-11 1-208-663-11 1-208-675-11 1-218-965-11 Description METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 39 39 1.6K 39 39 10K 10K 820 15K 15K 10K 2.2K 39K 10K 0 10K 15K 15K 100 0 0 0 5.6K 560 15K 3.3K 3.3K 47K 4.7K 3.3K 15K 1.8K 1.8K 0 0 0 0 0 10K 1K 1K 1K 47 47 47 47 68 68 68 33 220 68 150 150 680 150 150 150 470 10K 5% 5% 0.5% 5% 5% 5% 5% 5% 5% 5% 5% 0.5% 0.5% 0.5% Remark 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W Ref. No. R827 R828 R829 R830 R844 R845 R846 R847 R864 R865 R866 R867 R868 R869 R873 R877 R878 R879 R881 R882 R883 R884 R885 R888 R889 R893 R895 R896 R897 R898 R899 R919 R921 R922 R923 R926 R927 R928 R930 R933 R934 R935 R936 R937 R938 R940 R941 R942 R948 R953 R960 R962 R963 R977 R978 R1101 R1102 R1104 R1108 R1110 Part No. 1-208-691-11 1-208-691-11 1-208-695-11 1-208-695-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-939-11 1-218-939-11 1-218-939-11 1-218-939-11 1-218-941-81 1-218-959-11 1-218-953-11 1-218-961-11 1-218-965-11 1-218-965-11 1-216-830-11 1-218-949-11 1-218-953-11 1-216-830-11 1-218-965-11 1-218-973-11 1-218-977-11 1-218-965-11 1-218-965-11 1-208-700-11 1-208-700-11 1-208-700-11 1-208-700-11 1-218-990-81 1-218-965-11 1-218-965-11 1-218-965-11 1-218-933-11 1-218-933-11 1-218-933-11 1-218-965-11 1-218-965-11 1-218-933-11 1-218-933-11 1-218-965-11 1-218-933-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-941-81 1-218-965-11 1-218-933-11 1-218-933-11 1-218-965-11 1-218-965-11 1-218-929-11 1-208-692-11 1-208-911-11 1-218-965-11 1-218-965-11 Description METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 2.2K 2.2K 3.3K 3.3K 10K 10K 10K 10K 68 68 68 68 100 3.3K 1K 4.7K 10K 10K 5.6K 470 1K 5.6K 10K 47K 100K 10K 10K 5.1K 5.1K 5.1K 5.1K 0 10K 10K 10K 22 22 22 10K 10K 22 22 10K 22 10K 10K 10K 10K 10K 100 10K 22 22 10K 10K 10 2.4K 10K 10K 10K 0.5% 0.5% 0.5% 0.5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 0.5% 0.5% 0.5% 0.5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 0.5% 0.5% 5% 5% Remark 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/16W 1/16W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
5% 5% 5% 5%
1/10W 1/16W 1/16W 1/16W
0.5% 0.5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
1/10W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
10-13
BDP-S560 MB-127
Ref. No. R1113 R1118 R1119 R1123 R1124 R1128 R1133 R1134 R1135 R1137 R1138 R1139 R1141 R1142 R1208 R1209 R1210 R1211 R1212 R1223 R1231 R1234 R1235 R1236 R1237 R1258 R1259 R1261 R1263 R1271 R1272 R1284 R1287 R1289 R1301 R1302 R1303 R1305 R1308 R1309 R1310 R1311 R1335 R1354 R1355 R1356 R1358 R1359 R1362 R1402 R1403 R1404 R1405 R1406 R1407 R1408 R1409 R1410 R1411 R1412 Part No. 1-218-965-11 1-218-965-11 1-218-941-81 1-218-965-11 1-218-990-81 1-218-990-81 1-218-965-11 1-218-965-11 1-218-965-11 1-218-937-11 1-218-937-11 1-218-937-11 1-218-955-11 1-218-955-11 1-218-965-11 1-218-957-11 1-218-957-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-953-11 1-218-953-11 1-218-953-11 1-218-953-11 1-218-929-11 1-218-933-11 1-218-965-11 1-218-965-11 1-216-825-11 1-216-825-11 1-218-953-11 1-208-941-11 1-218-978-11 1-208-911-11 1-208-711-11 1-218-961-11 1-218-929-11 1-208-911-11 1-218-990-81 1-218-957-11 1-218-961-11 1-218-953-11 1-208-943-11 1-218-970-11 1-218-953-11 1-208-931-11 1-208-939-11 1-208-702-11 1-208-699-11 1-208-688-11 1-208-677-11 1-208-886-81 1-218-970-11 1-218-961-11 1-218-981-91 1-218-969-11 1-218-953-11 1-218-990-81 1-218-941-81 Description METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP 10K 10K 100 10K 0 0 10K 10K 10K 47 47 47 1.5K 1.5K 10K 2.2K 2.2K 10K 10K 10K 10K 1K 1K 1K 1K 10 22 10K 10K 2.2K 2.2K 1K 180K 120K 10K 15K 4.7K 10 10K 0 2.2K 4.7K 1K 220K 27K 1K 68K 150K 6.2K 4.7K 1.6K 560 910 27K 4.7K 220K 22K 1K 0 100 5% 5% 5% 5% Remark 1/16W 1/16W 1/16W 1/16W Ref. No. R1413 R1414 R1415 R1416 R1417 R1418 R1419 R1420 R1421 R1422 R1427 R1430 R1431 R1432 R1435 R1438 R1439 R1441 R1443 R1445 R1446 R1448 R1450 R1456 R1459 R1462 R1464 R1465 R1466 R1480 R1482 R1483 R4212 R4214 R4217 R4218 R4219 R4222 R4223 R4224 R4225 R4228 R4229 R4231 R4232 R4255 R4258 R4259 R7040 R7042 R8005 R8007 R8008 R8009 R8010 R8011 R8019 R8020 R8021 R8022 Part No. 1-218-941-81 1-218-941-81 1-218-990-81 1-218-990-81 1-218-941-81 1-218-941-81 1-218-959-11 1-218-977-11 1-218-941-81 1-218-977-11 1-218-965-11 1-218-965-11 1-218-990-81 1-218-965-11 1-218-990-81 1-218-965-11 1-218-965-11 1-218-965-11 1-218-977-11 1-218-977-11 1-218-941-81 1-218-958-11 1-218-941-81 1-218-941-81 1-218-965-11 1-218-977-11 1-218-977-11 1-218-981-91 1-218-990-81 1-218-990-81 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-949-11 1-218-949-11 1-218-990-81 1-218-971-11 1-218-971-11 1-218-971-11 1-218-965-11 1-208-931-11 1-218-892-11 1-208-930-11 1-208-930-11 1-218-961-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-959-11 1-208-701-11 1-208-701-11 1-218-965-11 1-208-663-11 1-208-663-11 1-208-663-11 1-208-701-11 1-208-701-11 1-208-663-11 Description METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100 100 0 0 100 100 3.3K 100K 100 100K 10K 10K 0 10K 0 10K 10K 10K 100K 100K 100 2.7K 100 100 10K 100K 100K 220K 0 0 10K 10K 10K 10K 470 470 0 33K 33K 33K 10K 68K 75K 62K 62K 4.7K 10K 10K 10K 10K 3.3K 5.6K 5.6K 10K 150 150 150 5.6K 5.6K 150 5% 5% Remark 1/16W 1/16W
5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 0.5% 5% 0.5% 0.5% 5% 5% 0.5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
5% 5% 5% 5% 5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 0.5% 0.5% 0.5% 0.5% 5% 5% 5% 5% 5% 5% 0.5% 0.5% 5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
5% 5% 5% 0.5% 5% 5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
5%
1/16W
10-14
BDP-S560 MB-127
Ref. No. R8029 R8030 R8031 R8032 R8035 R8036 R8037 R8038 R8039 R8040 R8041 R8042 R8043 R8044 R8045 Part No. 1-218-949-11 1-218-949-11 1-218-973-11 1-218-973-11 1-218-957-11 1-218-949-11 1-218-949-11 1-218-977-11 1-218-941-81 1-220-169-11 1-220-169-11 1-220-169-11 1-220-169-11 1-220-169-11 1-220-169-11 Description METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 470 470 47K 47K 2.2K 470 470 100K 100 75 75 75 75 75 75 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Remark 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W Ref. No. Part No. RB7010 1-234-378-21 RB7011 1-234-378-21 RB7012 RB7013 RB7014 RB7015 1-234-378-21 1-234-378-21 1-234-378-21 1-234-378-21
USB-016
USB-017
Remark
Description RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK < THERMISTOR > 10K (1005X4) 10K (1005X4) 10K (1005X4) 10K (1005X4) 10K (1005X4) 10K (1005X4)
TH1401 1-804-949-11
THERMISTOR, NTC (SMD) < VIBRATOR >
X1101
1-813-821-11
OSCILLATOR, CRYSTAL (50MHz)
A-1719-602-A
< COMPOSITION CIRCUIT BLOCK > RB101 RB102 RB103 RB104 RB105 RB201 RB202 RB203 RB204 RB205 RB502 RB503 RB505 RB506 RB507 RB508 RB509 RB510 RB511 RB512 RB513 RB514 RB522 RB901 RB902 RB903 RB904 RB905 RB906 RB1251 RB1252 RB1253 RB1254 RB1255 RB1256 RB1257 RB1258 RB1259 RB1401 RB1402 1-234-706-21 1-234-706-21 1-234-706-21 1-234-706-21 1-234-706-21 1-234-706-21 1-234-706-21 1-234-706-21 1-234-706-21 1-234-706-21 1-234-370-21 1-234-370-21 1-234-370-21 1-234-370-21 1-234-370-21 1-234-370-21 1-234-370-21 1-234-378-21 1-234-370-21 1-234-370-21 1-234-370-21 1-234-370-21 1-234-378-21 1-234-378-21 1-234-378-21 1-234-378-21 1-234-378-21 1-234-375-21 1-234-378-21 1-234-400-21 1-234-400-21 1-234-370-21 1-234-370-21 1-234-370-21 1-234-370-21 1-234-370-21 1-234-400-21 1-234-400-21 1-234-378-21 1-234-372-11 RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK 39 (1005X4) 39 (1005X4) 39 (1005X4) 39 (1005X4) 39 (1005X4) 39 (1005X4) 39 (1005X4) 39 (1005X4) 39 (1005X4) 39 (1005X4) 22 (1005X4) 22 (1005X4) 22 (1005X4) 22 (1005X4) 22 (1005X4) 22 (1005X4) 22 (1005X4) 10K (1005X4) 22 (1005X4) 22 (1005X4) 22 (1005X4) 22 (1005X4) 10K (1005X4) 10K (1005X4) 10K (1005X4)
USB-016 BOARD, COMPLETE *********************** (Ref. No. 20,000 Series) < CAPACITOR >
C781
1-162-923-11
CERAMIC CHIP < CONNECTOR >
47PF
5%
50V
CN781
1-566-760-11
PIN, CONNECTOR (PC BOARD) 5P
A-1719-604-A
USB-017 BOARD, COMPLETE *********************** (Ref. No. 20,000 Series) < CAPACITOR >
C791
1-162-923-11
CERAMIC CHIP < CONNECTOR >
47PF
5%
50V
CN790 * CN791
1-793-365-21 1-564-721-11
CONNECTOR, USB (A) (USB) PIN, CONNECTOR (SMALL TYPE) 5P
MISCELLANEOUS PARTS ******************** 7 8 53 55 57 101 154 155 M1401 1-836-438-11 1-836-439-11 1-836-488-11 1-458-129-11 1-836-489-11 1-474-150-51 1-836-504-11 8-820-424-02 1-787-879-11 CABLE, COAXIAL (WITH U.F.L CN) CABLE, COAXIAL (WITH U.F.L CN) CABLE, FLEXIBLE FLAT (FMF-004) CARD, WIRELESS LAN CABLE, FLEXIBLE FLAT (FMH-002) REGULATOR, SWITCHING (SRV2192U) CABLE, FLEXIBLE FLAT DEVICE,OPTICAL KEM-430AAA/C2R FAN, D.C.
RES, NETWORK 10K (1005X4) RES, NETWORK 10K (1005X4) RES, NETWORK 1K (1005X4) RES, NETWORK 10K (1005X4) CONDUCTOR, NETWORK (1005X4) CONDUCTOR, NETWORK (1005X4) RES, NETWORK 22 (1005X4) RES, NETWORK 22 (1005X4) RES, NETWORK 22 (1005X4) RES, NETWORK 22 (1005X4) RES, NETWORK 22 (1005X4) CONDUCTOR, NETWORK (1005X4) CONDUCTOR, NETWORK (1005X4) RES, NETWORK 10K (1005X4) RES, NETWORK 100 (1005X4) RES, NETWORK RES, NETWORK RES, NETWORK 100 (1005X4) 10K (1005X4) 10K (1005X4)
RB1403 1-234-372-11 RB7007 1-234-378-21 RB7008 1-234-378-21
The components identified by mark or dotted line with mark are critical for safety. Replace only with part number specified.
Les composants identifis par une marque sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.
10-15E
BDP-S560
REVISION HISTORY
Ver. 1.0 Date 2009.06 New Description of Revision

Sony BDP-S560 ET

Uploaded by

Copyright:

Available Formats

Sony BDP-S560 ET

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sony BDP-S560 ET

Uploaded by

Copyright:

Available Formats

BDP-S560

US Model Canadian Model

Inputs and outputs

BLU-RAY DISC/DVD PLAYER

2009F0500-1 2009.6 Published by Quality Assurance Dept.

BDP-S560 SAFETY CHECK-OUT

To Exposed Metal Parts on Set

Fig. A. Using an AC voltmeter to check AC leakage.

PRINTED WIRING BOARDS

5-1. 5-2. 5-3. 5-4. 5-5. 5-6. 5-7.

SECTION 1 SERVICE NOTE

DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)

Work when optical device are replaced

J-6090-199-A J-6090-200-A 3-702-101-01 J-6090-088-A J-6090-089-A J-6090-077-A J-6090-078-A

1-3-1-1. BLX-104 Menu Function (1) Main Menu

1-3-1-3. BLX-104 Menu Function (3) Main Menu

1-3-1-4. BLX-104 Menu Function (4) Sub menu1

1-3-1-5. BLX-104 Menu Function (5) Sub menu2

1-3-1-6. BLX-104 Menu Function (6) Sub menu3

1-3-1-7. BLX-104 Menu Function (7) Sub menu4

1-3-2-1. BLX-204 Menu Function (1) Main Menu

1-3-2-3. BLX-204 Menu Function (3) Main Menu

1-3-2-4. BLX-204 Menu Function (4) Sub menu 1

1-3-2-5. BLX-204 Menu Function (5) Sub menu 2

1-3-2-6. BLX-204 Menu Function (6) Sub menu 3

1-3-2-7. BLX-204 Menu Function (7) Sub menu 4

2-2. UPPER CASE (Page 2-1)

2-3. FRONT PANEL BLOCK (Page 2-2)

2-5. WIRELESS LAN CARD BLOCK (Page 2-3)

2-6. REAR PANEL BLOCK (Page 2-4)

2-4. BD DRIVE (Page 2-3)

MB-127 BOARD (Page 2-4)

2-8. SWITCHING REGULATOR (Page 2-5)

Note: Follow the disassembly procedure in the numerical order given.

3 upper case 1 tapping screw (tightening torque = 5.5 to 7.5 kgfcm)

2 three screws (tightening torque = 5.5 to 7.5 kgfcm)

1 tapping screw (tightening torque = 5.5 to 7.5 kgfcm)

FRONT PANEL BLOCK

1 two coaxial cables

3 front panel block

1 harness (PM-159) (CN3)

5 four screws (BV3) (tightening torque = 5.5 to 7.5 kgfcm)

WIRELESS LAN CARD BLOCK

Note: Do not injure by the sharp edge of the heat sink.

Harness come to front area.

REAR PANEL BLOCK

4 screw (B3) (tightening torque = 4 to 5 kgfcm)

Note: Do not injure by the sharp edge of the heat sink.

5 flexible flat cable (CN1301) 4 flexible flat cable (CN4201)

6 harness (PM-159) (CN801) 7 harness (UV-005) (CN602)

3 flexible flat cable (CN4261) 2 harness (PM-160) (CN301)

8 six screws (BV3) (tightening torque = 5.5 to 7.5 kgfcm)

1 flexible flat cable (FMF-004) (CN1404)

CIRCUIT BOARDS LOCATION

switching regulator USB-016 board wireless LAN card

FR-302 board USB-017 board

HU-012 board ANT-001 board

SECTION 3 BLOCK DIAGRAMS

WIRELESS LAN CARD (WLAN MODULE)

CN702 HDMI OUT