Scribd
Upload
60 views

Question Bank: Unit I Systems and Their Representation

This document contains questions related to control systems engineering. It includes questions on deriving transfer functions for various mechanical systems and electrical components like DC motors and servos. There are also questions on determining characteristics like rise time, damping ratio, and percent overshoot from the closed loop transfer function or differential equations describing servomechanism systems. The questions cover various concepts in systems and their representation including modeling, analysis of responses, and performance characteristics.

Uploaded by

ramyakala
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
60 views

Question Bank: Unit I Systems and Their Representation

This document contains questions related to control systems engineering. It includes questions on deriving transfer functions for various mechanical systems and electrical components like DC motors and servos. There are also questions on determining characteristics like rise time, damping ratio, and percent overshoot from the closed loop transfer function or differential equations describing servomechanism systems. The questions cover various concepts in systems and their representation including modeling, analysis of responses, and performance characteristics.

Uploaded by

ramyakala
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 6

1 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING

QUESTION BANK

SUBJECT CODE & NAME : CONTROL SYSTEMS ENGINEERING YEAR / SEM : II / IV

UNIT I SYSTEMS AND THEIR REPRESENTATION

1. .Write the dif erential equations governing the Mechanical system shown in fig
1.1.and determine the transfer function.

5. Obtain the closed loop transfer function C(S)/R(S) of the system whose block is shown in fig.

www.smk07eee.co.cc

10. (I) Derive the transfer function for Armature controlled DC motor. (8) (I )Derive the transfer function for Field controlled DC motor. (8) 11. (i)Explain DC servo motor. (6) (ii)Explain the working of AC servomotor in control systems. (10) 12. (i)Explain Synchros and its types. (10) (ii)Write the rules for block diagram reduction techniques.

1. (a) Derive the expressions and draw the response of first order system for unit step input. (b) Draw the response of second order system for critical y damped case and when input is unit step. 2. Derive the expressions for Rise time, Peak time, Peak overshoot, delay time (16) (8) (8)

4. (i) Measurements conducted on a Servomechanism show the system response to be c(t)=1+0.2 -60t -1.2 10 t. when subjected to a unit step. Obtain an expression for closed loop transfer function. 5. (i) A unity feedback control system has an open loop transfer function G(S)= 10/S(S+2).Find the rise time, percentage over shoot, peak time and set ling time. (ii) A closed loop servo is represented by the dif erential equation d2c/dt2 +8 dc/dt = 64 e Where c is the displacement of the output shaft r is the displacement of the input shaft and e= r-c.Determine undamped natural frequency, damping ratio and percentage maximum overshoot for unit step input. 6. (a)For a unity feedback control system the open loop transfer function G(S) = 10(S+2)/ S2 (S+1).Find (a) position, velocity and acceleration error constants. (b)The steady state error when the input is R(S) where (8) (8) (8)

You might also like