Scribd
Upload
481 views2 pages

K32LCD

This document provides a quick reference guide for using the K32LCD keypad. It summarizes how to perform common tasks like arming the system in away or stay modes, disarming, bypassing zones, and viewing alarm memories or trouble displays. The guide also outlines how to send panic alarms to the security company using specific key combinations. Navigation and status lights are displayed using the arrow keys and AC/StayD lights.

Uploaded by

enachealex
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
481 views2 pages

K32LCD

This document provides a quick reference guide for using the K32LCD keypad. It summarizes how to perform common tasks like arming the system in away or stay modes, disarming, bypassing zones, and viewing alarm memories or trouble displays. The guide also outlines how to send panic alarms to the security company using specific key combinations. Navigation and status lights are displayed using the arrow keys and AC/StayD lights.

Uploaded by

enachealex
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

K32LCD - User Quick Reference Guide

The LCD will guide you with detailed messages.

Use the arrow keys to scroll the menu or options.

AC Light
ON = Power on OFF = Power off

Keys
= Press once + [MASTER CODE] for Quick Menu programming = Press & hold for keypad settings = Press & hold for chime programming

StayD Light
ON = StayD on OFF = StayD off

How to Arm (when StayD is OFF)

To Arm When Leaving...

To Arm When Staying...

To Regular Arm: To Stay Arm: 1. Close all zones in the desired partition. 1. Press the [STAY] key. 2. Press [ARM]. 2. Enter your [ACCESS CODE]*. 3. Enter your [ACCESS CODE]. To Sleep Arm: 1. Press the [SLEEP] key. 2. Enter your [ACCESS CODE]*.

To Disarm: [OFF] + [ACCESS CODE]*


* Press button(s) corresponding to desired partition(s). For two partitions, press the other key after the confirmation beep. If StayD is ON, refer to the StayD User Card for more information.

Trouble Display
The screen will display all troubles when they occur. 1. Press the [TBL] key. The trouble(s) will be displayed. Scroll through the trouble list using the [ ] and [ ] keys. 2. Read the corresponding explanation of the trouble from the trouble list in the User Guide. If no repair instructions are given, call your security company for repairs. 3. Press the [CLEAR] key to exit.

Panic Keys
To send a silent or audible alarm to your security company, press and hold one of the key combinations listed below for two seconds. Panic Alarm Type Police Medical Fire Key Combinations Keys [1] and [3] Keys [4] and [6] Keys [7] and [9]

How to Bypass Zones


Bypassed zones remained unarmed when the partition is armed. 1. Press the [BYP] key. 2. Enter your [ACCESS CODE]. 3. Select the zone(s) you want to bypass by entering the two-digit zone number (i.e. zone 3 = 03). 4. Press the [ENTER] key to save and exit.

Alarm Memory Display


To view the alarms that occurred during the last armed period: 1. Disarm the system. 2. Press the [MEM] key. 3. The zones that were in alarm the last time the system was armed will be displayed. 4. Press the [ENTER] key to save and exit.

paradox.com Printed in Canada - 05/2010 K32LCD-EQ01

You might also like