0% found this document useful (0 votes)
71 views1 page

Torque Application Is A) Higher B) Lower

Variable speed cannot be obtained with DC motors and AC and DC controllers. Variable torque applications like fans and pumps have higher energy savings potential compared to constant torque applications. Stator voltage control is suitable for speed control of induction motors used in fan and pump drives. The effect of friction torque is more pronounced when starting or stopping a drive versus when running at full or half speed. Squirrel cage induction motors are preferred when quick speed reversal is required.

Uploaded by

gobichand7
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
71 views1 page

Torque Application Is A) Higher B) Lower

Variable speed cannot be obtained with DC motors and AC and DC controllers. Variable torque applications like fans and pumps have higher energy savings potential compared to constant torque applications. Stator voltage control is suitable for speed control of induction motors used in fan and pump drives. The effect of friction torque is more pronounced when starting or stopping a drive versus when running at full or half speed. Squirrel cage induction motors are preferred when quick speed reversal is required.

Uploaded by

gobichand7
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

C.

Gobi 08E615

1. Variable speed cannot be obtained with ____. a) DC motors controller c) Soft starter controller b) AC motor controller d) AC & DC controllers

2. Energy savings potential of variable torque applications compared to constant torque application is a) Higher c) Equal b) lower d) none of the above

3. Stator voltage control for speed control of induction motors is suitable for (A) Fan and pump drives (C) Running it as generator 4. Effect of friction torque is more pronounced (A) When the drive is running on full speed (B) when the drive is being started (B) drive of a crane (D) constant load drives.

(C) When the drive is being stopped (D) when the drive at half of its normal speed. 5. When quick speed reversal is a consideration, the motor preferred is (A) Synchronous motor (C) wound rotor induction motor (B) squirrel cage induction motor (D) dc motor.

You might also like