How To Create Generic Delta

Uploaded by

Dinesh Simhadri

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

276 views

How To Create Generic Delta

Uploaded by

Dinesh Simhadri

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 7

How to Create Generic Delta

B USINESS I NFORMATION W AREHOUSE

Applicable Releases: SAPI Release 3.0B August 2002

SAP (SAP America, Inc. and SAP AG) assumes no responsibility for errors or omissions in these materials. These materials are provided as is without a warranty of any kind, either express or implied, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement. SAP shall not be liable for damages of any kind including without limitation direct, special, indirect, or consequential damages that may result from the use of these materials. SAP does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. SAP has no control over the information that you may access through the use of hot links contained in these materials and does not endorse your use of third party web pages nor provide any warranty whatsoever relating to third party web pages. mySA P BI How -To papers are intended to simplify the product implementation. While specific product features and procedures typically are explained in a practical business context, it is not implied that those features and procedures are the only approach in solving a specific business problem using mySAP BI. Should you wish to receive additional information, clarification or support, please refer to SAP Professional Services (Consulting/Remote Consulting

HOW TO CREATE GENERIC DELTA

1 Business Scenario
You want to extract data from Z tables or table that does not have any standard extractors . This document is written with BW 3.0B and Plug-in 2002.1. It was also tested with BW 2.1C SP15 & PI 2002.1_46C Support Package 1.

2 The Step By Step Solution

The new generic delta service supports delta extractors on monotonic delta attributes like Timestamp, Calendar day, Numeric pointer (e.g. document number, counter) must be strictly monotonic increasing with time. Only one attribute can be defined as the delta attribute. 1. Under Transaction SBIW - This step gives you the option of creating and maintaining generic Data Sources for transaction data, master data attributes or texts from any kind of transparent tables, database views or SAP query functional areas or via a function module, regardless of application. This enables you to use the generic extraction of data.

Please Note: The following example is only used to illustrate how to use the generic delta. For extracting data from the VBAK table, the Logistics Extraction Cockpit is the recommended method.

2002 SAP AMERICA , I NC. AND SAP AG

HOW TO CREATE GENERIC DELTA

2. Create a Generic Data Source a). Select the Data Source type and assign a technical name to it. b). Choose Create The screen for creating a generic Data Source appears.

3. a) Choose an application Component to which the data source is to be assigned. b) Enter the descriptive texts. You can choose these freely. c) Choose Generic Delta.

2002 SAP AMERICA , I NC. AND SAP AG

HOW TO CREATE GENERIC DELTA

4. Specify the delta-specific field and the type for this field. Maintain the settings for the generic delta: Specify a safety interval. NOTE: Safety interval should be set so that no document is missed even if it was not stored in the DB table when the extraction took place. (More Tips at the end of this document)

4. Select Delta type: New status for changed records (I.e. after-image); This can be used with Data target ODS (AIE). Additive Delta (I.e. aggregated data records) (ADD) Then choose Save.

2002 SAP AMERICA , I NC. AND SAP AG

HOW TO CREATE GENERIC DELTA

6. After step 4, the screen of step 3 comes back. Now choose Save again. This will generate the data source. After generating the data source, you will see the Delta Update flag selected. In systems as of basis release 4.0B, you can display the current value for the delta-relevant field in the delta queue.

7. Choose Save again.

2002 SAP AMERICA , I NC. AND SAP AG

HOW TO CREATE GENERIC DELTA

8. Delta Attributes can be monitored in delta queue (RSA7). Also note LUW count does not equal to the changes records in the source table. Most of the time it will be ZERO. Delta is enabled by data selection logic LUW count can also have value 1. Whenever delta is extracted, the extracted data is stored in the delta queue tables to serve as a fallback, when an error occurs during the update of the BW system. You will see a '1' in this field (the extract counts as one LUW) and are even able to be displayed in a detail screen.

Click

2002 SAP AMERICA , I NC. AND SAP AG

HOW TO CREATE GENERIC DELTA

Example for Determining Selection Intervals with a Generic Delta: 1. For every delta extraction, there is a selection criteria generated: ? last extraction status (RSA7) < x <= Today. 2. Offsets for upper and lower delimiter are subtracted from the respective sides 3. Example 1 shows the normal behavior (both offsets = 0), example 2 shows both safety intervals (offset for lower delimiter = 2, offset for upper delimiter = 1) 4. Offset for lower delimiter can only be defined for delta method new status for changed records

Example 1 (both offsets = 0):

already extracted to be extracted in the next run last extraction today

Example 2 (offset = 2 resp. offset = 1):

Tips: 1. If delta field is Date (Record Create Date or change date), then use Upper Limit of 1 day. This will load Delta in BW as of yesterday. Leave Lower limit blank. 2. If delta field is Time Stamp, then use Upper Limit of equal to 1800 Seconds (30 minutes). This will load Delta in BW as of 30 minutes old. Leave Lower limit blank. 3. If delta field is a Numeric Pointer i.e. generated record # like in GLPCA table, then use Lower Limit. Use count 10-100. Leave upper limit blank. If value 10 is used then last 10 records will be loaded again. If a record is created when load was running, those records may get lost. To prevent this situation, lower limit can be used to backup the starting sequence number. This may result in some records being processed more than once; therefore, be sure this DataSources is only feeding an ODS Object