Scribd
Upload
1K views

USCG Stability Data Reference Book

This document appears to contain technical specifications and performance measurements for a ship, including its deadweight scale, draft, displacement, stability curves showing righting arm, and waterplane area coefficient at various load conditions. Key details measured include displacement from 9,500 to 11,500 tons, draft from 25 to 28 feet, and righting arm ranging from 0 to over 8 feet as the vessel heels over.

Uploaded by

Ivo D'souza
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

USCG Stability Data Reference Book

This document appears to contain technical specifications and performance measurements for a ship, including its deadweight scale, draft, displacement, stability curves showing righting arm, and waterplane area coefficient at various load conditions. Key details measured include displacement from 9,500 to 11,500 tons, draft from 25 to 28 feet, and righting arm ranging from 0 to over 8 feet as the vessel heels over.

Uploaded by

Ivo D'souza
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 31
INSTRUCTIONS 1. Some of the questions in tha deck examinalion booklets require the use of trim and stability reference material to answer the question. All of tha material necessary to these questions is contained in the appropriate Merchant Marine Deck Examination Reference Book. 2. Ifa question requires the use of trim / stabllity reference materials, It will be specifically stated inthe stem of the question. For example, ifthe questionin your examination bookletis, "The sailing draits are: FWD 24! -03", AFT 25' -03" and the GMis 5.6 feet. Use the information in Section 1, the blue pages of the Stability Data Reference Book, to determine the available righting arm at 30 degrees inclination.”, you must use Section 1 {the blue pages) of The Merchant Marine Deck xamination Reference Book, STABILITY DATA REFERENCE BOOK to answer the question. 3. The Merchant Marine Deck Examination Reference Book, STABILITY DATA REFERENCE BOOK, has three (3) sections. Each section has its own index and Is color coded as follows: 1. Selected Stability Curves Blue Pages 2. Trim and Stability Book - White Pages 3. Trim and Stability Book - $.! Salmon Pages: 000060 CCOOOOOOOOTTCCOCCOOEOOHEOOS TABLE OF CONTENTS SECTION Selected Stability Curves Deadweight Scale Hydrostatic Curves Cross-Curves *Statical Stability Curves *Floodable Length Curve : Trim and Stability Book - S.S. AMERICAN MARINER Table of Principal Characteristics Trim Correction Table Hydrostatic Properties Free Surface Correction and Tank Cap, Gain in GM Table Required GM Curve Loading Table ‘Loading Summary Double Bottom Tankage Loading, Trim, and Stability Book ~ S.S. NORTHLAND Table of Contents Notes to Master . Instructions - Trim and Stability Instructions - Hog and Sag Tank Capy. and CG Vertical Moments of Free Surface Trim Correction Table Curves of Form “Loading Summary *Detall of Deadweight *Longitudinal Bending Stresses PAGES Blue Pages aoe White Pages Salmon Pages Sheet ¢ Sheet 1 Sheet 2 Sheet 3 Sheet 4 Sheet 5 Sheet 6 Sheet Sheet 814 Sheet $18-C-D Sheet 8l€ ‘Working copies of these pages are available to the candidate. COOOSOOOOOOOOOOOTSCCOOCOOOEHOOOOOO DEADWEIGHT SCALE J EREEBOARD DRAFT 29.06% Waterplane coef. 70 8 80 85 Block coal. 65 15 a5 b 042 055 062 28 30 32

You might also like