Scribd
Upload
147 views2 pages

Comandos de Router

This document provides instructions for configuring basic settings and network services on a router including the hostname, passwords, interfaces, static routes, DHCP, NAT/PAT, RIP routing, and restoring the enable password. It includes commands for configuring IP addresses, enabling protocols, and verifying configurations.

Uploaded by

Roger Moreira
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
147 views2 pages

Comandos de Router

This document provides instructions for configuring basic settings and network services on a router including the hostname, passwords, interfaces, static routes, DHCP, NAT/PAT, RIP routing, and restoring the enable password. It includes commands for configuring IP addresses, enabling protocols, and verifying configurations.

Uploaded by

Roger Moreira
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

A=10.0.0.0/8 B=172.16.0.0/16 C=192.168.1.

0/24 INICIAR SESION DE ROUTER Y CONFIG NAME AND PASSWORD Router>enable Router#configure terminal config te Router(config)#hostname <name> <name>(config)#line console 0 <name>(config-line)#password <newpassword> <name>(config-line)#login <name>(config-line)#exit PASSWORD DE LINEAS DE TERMINAL VIRTUAL (VTY) <name>(config)#line vty 0 4 <name>(config-line)#password <password> <name>(config-line)#login <name>(config-line)#exit <name>(config)#enable password <password> <name>(config)#enable secret <newpassword1> <name>(config)#exit MOSTRAR CONFIG. EN EJECUCION DEL ROUTER <name>#show running-config sh run CONFIG. INTERFAZ SERIAL DEL ROUTER <name>(config)#interface serial 0/0/0 <name>(config-if)#ip address <direcc_ip> <mask_ip> <name>(config-if)#clock rate 56000 64000 (solo si interfaz router es DCE) <name>(config-if)#no shutdown <name>(config-if)#exit <name>(config)#exit <name>#show interface serial 0/0/0 (ver la interfaz serial router) CONFIG. INTERFAZ FASTETHERNET DEL ROUTER <name>(config)#interface fastethernet 0/0 <name>(config-if)#ip address <direcc_ip> <mask_ip> <name>(config-if)#no shutdown <name>(config-if)#exit <name>(config)#exit <name>#show interface fastethernet 0/0 (ver la interfaz fastethernet router) GUARDAR CONFIG. DE ROUTER <name>#copy running-config startup-config CONFIG. RUTAS ESTATICAS Y POR DEFECTO EN ROUTER ESTATICA <name>(config)#ip route 0.0.0.0 0.0.0.0 <direcc_ip_fastethernet_router> POR DEFECTO <name>(config)#ip route <direcc_ip_serial_router> <mask-ip> <direcc_ip_fastether net_router> <name>(config)#show ip route (ver ruta estatica y por defecto) CONFIG. DIRECCION LOOPBACK <name>(config)#interface loopback 0

<name>(config-if)#ip address <direcc_ip> <mask_ip> CONFIG. DHCP <name>(config)#ip dhcp excluded-address <direcc_ip> <name>(config)#ip dhcp pool internal <name>(dhcp-config)#network <direcc_ip> <mask_ip> <name>(dhcp-config)#domain-name <name> <name>(dhcp-config)#default-router <direcc_ip> <name>(dhcp-config)#dns-server <direcc_ip> <name>#show ip dhcp binding (ver asignacion dhcp) CONFIGURAR NAT/PAT <name>(config)#access-list 1 permit <direcc_ip> <mask_willcard (0.0.0.255)> (ide ntifica lista de direcc para traducir) CREAR NAT <name>(config)#ip nat inside source list 1 interface serial 0/0/0 overload <name>(config)#interface serial 0/0/0 <name>(config-if)#ip nat outside <name>(config-if)#exit <name>(config)#interface fastethernet 0/0 <name>(config)#ip nat inside <name>(config)#end <name>#show ip nat translation (probar NAT) <name>#debug ip icmp (ver paquetes ICMP) <name>#clear ip nat translation (eliminar NAT) CONFI. RIP <name>#router rip <name>(config-router)#version 2 <name>(config-router)#network <direc_ip> (fastethernet) <name>(config-router)#network <direc_ip> (serial) <name>(config-router)#exit ELIMINAR ERROR DE COMANDO <name>(config)no ip domain lookup RECUPERAR CONTRASEA rommon 1 > confreg 0x2142 rommon 2 > reset Router> enable Router# configure terminal Router(config)# enable secret nuevo password Router(config)# config-register 0x2102 Router(config)# exit Router# copy running-config startup-config Router# reload

You might also like