Scribd Logo
Upload

Welcome to Scribd!

  • 160 views

    Simple Water Level Indicator 1

    Uploaded by

    CoOl DiShu Rockin
    This circuit uses 5 transistor switches and probes placed at different depths in a tank to indicate the water level. Each transistor controls an LED that lights up when its probe is connected by water. The probes are made of insulated aluminum wire and connected to points in the circuit diagram. Using AC voltage prevents electrolysis and allows for maintenance-free operation for at least 2 years.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as RTF, PDF, TXT or read online from Scribd

    Simple Water Level Indicator 1

    Uploaded by

    CoOl DiShu Rockin
    160 views1 page
    This circuit uses 5 transistor switches and probes placed at different depths in a tank to indicate the water level. Each transistor controls an LED that lights up when its probe is connected by water. The probes are made of insulated aluminum wire and connected to points in the circuit diagram. Using AC voltage prevents electrolysis and allows for maintenance-free operation for at least 2 years.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    RTF, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This circuit uses 5 transistor switches and probes placed at different depths in a tank to indicate the water level. Each transistor controls an LED that lights up when its probe is connected by water. The probes are made of insulated aluminum wire and connected to points in the circuit diagram. Using AC voltage prevents electrolysis and allows for maintenance-free operation for at least 2 years.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    160 views1 page

    Simple Water Level Indicator 1

    Uploaded by

    CoOl DiShu Rockin
    This circuit uses 5 transistor switches and probes placed at different depths in a tank to indicate the water level. Each transistor controls an LED that lights up when its probe is connected by water. The probes are made of insulated aluminum wire and connected to points in the circuit diagram. Using AC voltage prevents electrolysis and allows for maintenance-free operation for at least 2 years.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    of 1

    Water Level Indicator Description This is the circuit diagram of a simple corrosion free water level indicator for

    home and industries. In fact the the level of any conductive non corrosive liquids can be measured using this circuit. The circuit is based on 5 transistor switches. Each transistor is switched on to drive the corresponding LED , when its base is supplied with current through the water through the electrode probes. One electrode probe is (F) with 6V AC is placed at the bottom of tank. Next probes are placed step by step above the bottom probe. When water is rising the base of each transistor gets electrical connection to 6V AC through water and the corresponding probe. Which in turn makes the transistors conduct to glow LED and indicate the level of water. The ends of probes are connected to corresponding points in the circuit as shown in circuit diagram.Insulated Aluminum wires with end insulation removed will do for the probe. Arrange the probes in order on a PVC pipe according to the depth and immerse it in the tank.AC voltage is use to prevent electrolysis at the probes. So this setup will last really long. I guarantee at least a 2 years of maintenance free operation. Thats what I got and is still going. Components T1 T5 BC 548 or 2N2222 Transistors R1-R5 2.2K 1/4 W Resistors R6-R10 22K 1/4 W Resistors D1 D5 LEDs ( color your choice) Notes: Use a transformer with 6V 500 mA output for power supply. Do not use a rectifier! we need pure AC. Use good quality insulated Aluminum wire for probes. If Aluminum wires are not available try Steel or Tin.Copper is the worst. Try the circuit first on a bread board and if not working properly, make adjustments with the resistance values. This is often needed because conductivity of water changes slightly from place to place. The type number of the transistors used here are not critical and any small signal NPN transistor will do the job. Few other suitable type numbers are BC546, BC107, PN2222, BC337, BF494, ZTX300, BEL187 etc. The circuit can be enclosed in a plastic box with holes for revealing the LEDs .

    You might also like