Scribd Logo
Upload

Welcome to Scribd!

  • 25K views

    Lathe PM Checklist

    Uploaded by

    Sandeep Ghadge
    This document provides a checklist for performing preventative maintenance on a lathe. The checklist includes inspecting safety components, alignments, lubrication systems, electrical systems, servo motors, axes, belts, covers, coolant systems, and optional accessories. Performing regular preventative maintenance through inspections and adjustments is emphasized as the key to reducing downtime and costs.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd

    Lathe PM Checklist

    Uploaded by

    Sandeep Ghadge
    25K views2 pages
    This document provides a checklist for performing preventative maintenance on a lathe. The checklist includes inspecting safety components, alignments, lubrication systems, electrical systems, servo motors, axes, belts, covers, coolant systems, and optional accessories. Performing regular preventative maintenance through inspections and adjustments is emphasized as the key to reducing downtime and costs.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a checklist for performing preventative maintenance on a lathe. The checklist includes inspecting safety components, alignments, lubrication systems, electrical systems, servo motors, axes, belts, covers, coolant systems, and optional accessories. Performing regular preventative maintenance through inspections and adjustments is emphasized as the key to reducing downtime and costs.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    25K views2 pages

    Lathe PM Checklist

    Uploaded by

    Sandeep Ghadge
    This document provides a checklist for performing preventative maintenance on a lathe. The checklist includes inspecting safety components, alignments, lubrication systems, electrical systems, servo motors, axes, belts, covers, coolant systems, and optional accessories. Performing regular preventative maintenance through inspections and adjustments is emphasized as the key to reducing downtime and costs.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 2

    Lathe Preventative Maintenance PM Program checklist form Customer/Cust asset # Model . .

    Inspection Status Safety Operation Interlocks E-stop Buttons Proper Guarding Damage Alignments inspection Level Turret Square Turret Radial Alignment Turret X-axis Centerline adjustment Head stock (Requires test cut setup) Sub spindle (May require set up) Tailstock (Requires test cut setup) Live tooling-Check groove orientation Lubrication Drain/Fill, Clean Suction Filter, Wipe clean Spindle lube tank Way Lube tank Hydraulic Unit Spindle Oil cooler Hydraulic System Inspection Cracked Hoses Oil leaks System pressure Clean Cooler fins on Unit Oil Cooler Clean Filter Clean Condenser Change oil Inspect proper operation Headstock/Spindle Check for abnormal Noise 1. High RPM 2. Low RPM Runout of Taper Vibration Belts (Some Models) Inspect air Filters Electrical Cabinet Oil cooler Electrical inspection Connections in cabinet Cables, Shielding Cooling Fans 1. Electrical cabinet 2. Axis drives and I/O 3. Axis and spindle drive 4. In front control Panel Servo Motors- Noise, Humming Battery Voltage/NC and APC Insulation resistance- motors at drive X-axis Y-axis (option) Z-axis A-axis (option) B-axis (option) C-axis (option) Spindle Subspindle (option) X, Y, Z, B, C axis Inspection Backlash test and adjustment X-axis Y-axis (option) Z-axis B-axis (option) C-axis (option) A-axis (Live Tooling option) Belts? Check for abnormal noise in axes Slide seals Way wipers Inspect Covers for proper function Coolant system Cleaning of machinery or Coolant system Clean Suction screens on pumps

    Serial Number . Comments or Readings

    Clean Screens Ball Bar Inspection, . . Optional accessories Conveyors Inspect cabling, and connections Grease bearings Chip Blaster or High Pressure Unit Inspect Cables and connections Change Filter (If filters are available) Change pump/gear oil Check pressure settings Other Options . . . . Additional Comments . . . . Preventative maintenance is the key to reducing downtime and costs

    You might also like