CHAPTER 6- AGGREGATE PLANNING 6AND INVENTORY MANAGEMENT

Principles of Supply Chain Management: A Balanced Approach

Prepared by Daniel A. Glaser-Segura, PhD

Learning Objectives
You should be able to:
Describe the hierarchical operations planning process in terms of materials planning & capacity planning Describe MRP, closed-loop MRP, MRP-II & ERP Know how to compute available-to-promise quantities. Know how to perform an MRP explosion. Distinguish dependent from independent demand inventories. Describe the four basic types of inventories & their functions. Understand the EOQ model

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

Chapter Six Outline

Operations Planning The Aggregate Production Plan: Chase, Level, & Mixed Strategies Mater Production Scheduling Master Production Schedule Time Fence Available-to-Promise Quantities Dependent Demand & Independent Demand The Bill of Materials Materials Requirement Planning Capacity Planning Independent Demand Inventory Systems The ABC Inventory Control System The Economic Order Quantity Model

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

Introduction
Scheduling & inventory management influence how assets are deployed. Problem: A missed due date or stock-out may cascade downstream, affecting the supply chain. Operations managers are continuously involved in balance capacity & output. Here we will discuss: Hierarchical operations planning process Dependent & independent demand Basic types of inventories Various inventory management approaches
Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

Matching Supply and Demand

Suppliers must accurately forecast demand so they can produce & deliver the right quantities at the right time at the right cost. Suppliers must find ways to better match supply and demand to achieve optimal levels of cost, quality, and customer service to enable them to compete with other supply chains. Problems that affect product & delivery will have ramifications throughout the chain.

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

Operations Planning
Operations planning is usually hierarchical & can be divided into three broad categories: Long-range- Aggregate Production Plan (APP) involves the construction of facilities & major equipment purchase Intermediate- Shows the quantity & timing of end items (i.e., master production schedule- MPS) Short-range- detailed planning process for components & parts to support the master production schedule (i.e., materials requirement planning- MRP)

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

Operations Planning- Cont. Planning Closed-loop MRP- incorporates the aggregate production plan, the master production schedule material requirements plan, capacity requirements plan. Manufacturing resource planning (MRP-II) incorporates the business & sales plans with the closed-loop MRP system. Distribution requirement planning (DRP) describes the timephased net requirements from warehouses & distribution centers customer demand minus any on hand in-transit inventories.

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

Aggregate Production Plan

Hierarchical planning- process that translates annual business & marketing plans & demand forecasts into a production plan for all products in a plant or facility. Hence, Aggregate Production Plan Planning horizon of APP- at least one year & is usually rolled forward by three months every quarter Costs relevant to the aggregate planning decision include inventory, setup, machine operation, hiring, firing, training, & overtime costs
Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

Aggregate Production Plan- Cont. PlanThree basic production strategies :

1. Chase Strategy- Adjusts capacity to match the demand pattern. Firm hires & lays off workers to match production to demand. Workforce fluctuates but finished goods inventory remains constant. Works well for make-to-order firms. 2. Level Strategy- Relies on a constant output rate & capacity while varying inventory & backlog levels according to fluctuating demand pattern. Workforce levels stay constant & firm relies on fluctuating finished goods inventories & backlogs to meet demand. Works well for make-to-stock manufacturing firms. 3. Mixed Production Strategy- To maintain stable workforce core while using other short-term means, such as overtime, & additional subcontracting or part time helpers to manage short-term demand.
Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

Master Production Scheduling

Master Production Schedule- A detailed disaggregation of the aggregate production plan, listing the exact end items to be produced by a specific period. More detailed than APP & easier to plan under stable demand. Planning horizon is shorter than APP, but longer than the lead time to produce the item. Note: For the service industry, the master production schedule may just be the appointment log or book, which ensures that capacity (e.g., skilled labor or professional service) is balance with demand.

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

10

Master Production Scheduling-Cont. SchedulingThe MPS is the production quantity to meet demand from all sources & is used for computing the requirements of all time-phased end items. Frequent changes to the MPS may create system nervousnessSituation where a small change in the upper-level-production plan causes a major change in the lower-level production plan. Many firms use a time fence system to deal with system nervousness. A time fence separates the planning horizon into two segments Firmed Segment (AKA as a demand time fence), from current period to several weeks into future. Can only be altered by senior management. Tentative segment (AKA planning time fence), from end of the firmed segment to several weeks farther into the future.
Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

11

Master Production Scheduling-Cont. SchedulingAvailable-to-Promise (ATP) QuantitiesThe MPS decides whether additional orders can be accepted for difference between confirmed customer orders & the quantity the firm planned to produce. Three basic methods of calculating the available-to-promise quantities: 1. Discrete available-to-promise 2. Cumulative available-to-promise without look ahead, & 3. Cumulative available-to-promise with look ahead.

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

12

Master Production Scheduling-Cont. SchedulingDiscrete Available-to-Promise

1. 2. Add the Beginning Inventory to the MPS for Period 1, subtracting the Committed Customer Orders. For the next period, subtract the Committed Customer Orders. If quantity is positive, this becomes the Period 2 ATP. If negative, subtract enough from the previous periods ATP to make the current periods ATP zero. For subsequent periods, follow Step 2.

3.

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

13

Master Production Scheduling-Cont. Scheduling-

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

14

Dependent & Independent Demand

Dependent Demand
Describes the internal demand for parts based on the demand of the final product in which the parts are used. Subassemblies, components, & raw materials are examples of dependent demand items.

Independent Demand
The demand for final products & has a demand pattern affected by trends, seasonal patterns, & general market conditions.

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

15

The Bill of Materials

Bill of Materials (BOM) An engineering document that shows an inclusive listing of all component parts & assemblies making up the final product. Multilevel Bill of Materials shows the parent-component relationships & the specific units of components known as the planning factor. The multilevel bill of materials can be presented as an indented bill of materials. At each level of indentation, the level number increases by one. Super Bill of Materials (AKA planning BOM, pseudo BOM, phantom BOM, or family BOM) enables the firm to forecast the total demand end products.
Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

16

The Bill of Materials- Cont. Materials-

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

17

The Bill of Materials- Cont. Materials-

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

18

The Bill of Materials- Cont. Materials-

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

19

Materials Requirement Planning

MRP- A computer-based materials management system. The materials requirement plan calculates the exact quantities, need dates, & planned order releases for subassemblies & materials required to manufacture the final products listed on . MRP requires: The independent demand information. Parent-component relationships from the bill of materials. Inventory status of the final product & all of the components. Planned order releases (output of the MRP system) Advantage of MRP- provides planning information Disadvantage of MRP- loss of visibility, especially acute for products with a deep bill of materials, & ignore capacity & shop floor conditions.
Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

20

Materials Requirement Planning- Cont. PlanningTerms used in Materials Requirement Planning

1. Parent: Item generating the demand for lower-level components. 2. Components: parts demanded by a parent. 3. Gross requirement: A time-phased requirement prior to netting out on-hand inventory & the lead-time consideration. 4. Net requirement: The unsatisfied item requirement for a specific time period. Gross requirement for that period minus the current on-hand inventory. 5. Scheduled receipt: A committed order awaiting delivery for a specific period. 6. Projected on-hand inventory: Projected closing inventory at the end of the period. Beginning inventory minus the gross requirement, plus the scheduled receipt & planned receipt & planned receipt from planned order releases. 7. Planned order release: Specific order to be released to the shop or to the supplier.
Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

21

Materials Requirement Planning- Cont. PlanningTerms used in Materials Requirement Planning- Cont. 8. Time bucket: Time period used on the MRP. Days or weeks. 9. Explosion: The process of converting a parent items planned order releases into component gross requirements. 10. Planning factor: Number of components needed to produce a unit of the parent item. 11. Firmed planned order: Planned order that the MRP computer logic system does not automatically change when conditions change to prevent system nervousness. 12. Pegging: Relates gross requirements for a part to the planned order releases the reverse of the explosion process. 13. Low-level coding: assigns the lowest level on the bill of materials to all common components to avoid duplicate MRP computations. 14. Lot size: The order size for MRP logic 15. Safety Stock: Protects against uncertainties in demand supply, quality, & lead time.
Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

22

Capacity Planning
Excess (or insufficient) capacity prevents firm from taking advantage of the efficiency of manufacturing planning & control system. Resource Requirement Planning (RRP), a long-range capacity planning module, checks whether aggregate resources are capable of satisfying the aggregate production. Resources considered include gross labor hours & machine hours. Medium-range capacity plan, or rough-cut capacity plan (RCCP), used to check feasibility of MPS. Converts MPS from production needed to capacity required, then compares it to capacity available. Capacity requirement planning (CRP) is a short-range capacity planning technique that is used to check the feasibility of the material requirements plan.

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

23

Independent Demand Inventory Systems

Independent demand inventory systemEnsures smooth operations & allows storing-up WIP & finished goods. Service firms are unable to inventory their output, but may use appointment backlogs, labor scheduling & cross-training to balance supply & demand. Four broad categories of inventories Raw materials- unprocessed purchase inputs. Work-in-process (WIP)- partially processed materials not yet ready for sales. Finished goods- products ready for shipment. Maintenance, repair & operating (MRO)- materials used when producing (e.g., cleaners & brooms).
Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

24

Independent Demand Inventory SystemsSystemsCont.

ABC Inventory Control System- Determines which inventories should be counted and managed more closely than others. Groups inventory as A, B, and C Items. A items are given the highest priority with larger safety stocks. A items, which account for approximately 20 % of the total items, account for about 80 % of the total inventory cost B and C account for the other 80% of total items and only 20% of costs. The B items require closer management since they are relatively more expensive (per unit), require more effort to purchase/make, and may be more prone to obsolescence than the trivial many C items. C items have the lowest priority.

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

25

Independent Demand Inventory SystemsSystemsCont.

The Economic Order Quantity (EOQ) ModelA quantitative decision model based on the trade-off between annual inventory holding costs and annual order costs. The EOQ model seeks to determine an optimal order quantity, where the sum of the annual order cost and the annual inventory holding cost is minimized. Order Cost is the direct variable cost associated with placing an order. Holding Cost or carrying cost is the cost incurred for holding inventory in storage.

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

26

Independent Demand Inventory SystemsSystemsCont.

Assumptions of the Economic Order Quantity Model Demand must be known & constant. Delivery time is known & constant. Replenishment is instantaneous. Price is constant. Holding cost is known & constant. Ordering cost is known & constant. Stock-outs are not allowed.

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

27

Independent Demand Inventory SystemsSystemsCont.

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

28

Independent Demand Inventory SystemsSystemsCont.

Principles of Supply Chain Management: A Balanced Approach by Wisner, Leong, and Tan. 2005 Thomson Business and Professional Publishing

29