Scribd
Upload
31 views

Accessory Structures:: Zoning Comparison

This document summarizes and compares zoning standards for accessory structures in R-150 and R-200 residential zones. It outlines definitions and placement standards such as setbacks, height limits, and lot coverage restrictions. The rationale section explains proposed changes to certain standards for accessory structures, including reduced front and rear setbacks and building height maximums to ensure structures remain subordinate to the main building. Other dimensional standards for principal buildings are addressed in separate fact sheets.

Uploaded by

Planning Docs
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
31 views

Accessory Structures:: Zoning Comparison

This document summarizes and compares zoning standards for accessory structures in R-150 and R-200 residential zones. It outlines definitions and placement standards such as setbacks, height limits, and lot coverage restrictions. The rationale section explains proposed changes to certain standards for accessory structures, including reduced front and rear setbacks and building height maximums to ensure structures remain subordinate to the main building. Other dimensional standards for principal buildings are addressed in separate fact sheets.

Uploaded by

Planning Docs
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Accessory Structures: R-200 & R-150

Zoning Comparison
An accessory structure is a building subordinate to, and located on the same lot with, a main building, the use of which is clearly incidental to that of the main building or to the use of the land, and which is not attached by any part of a common wall or common roof to the main building. In addition to any other meaning the word subordinate may have in this definition, on a lot where the main building is a detached house, except for an accessory agricultural building, subordinate means that the footprint of the accessory building is smaller than the footprint of the main building.

Standard Method of Development for Detached House Building Type


A. Placement R-150, R-200 65 15 12 7 N/A 20% RLD-20 10 behind front building line 15 12 7 4 or 20 N/A Detached Accessory Structure (min) Front setback Side street setback Side setback, interior Rear setback, interior Rear setback, alley Coverage (max) Accessory structure coverage of rear yard B. Height 50 35

Detached Accessory Structure (max) Overall building height

Rationale for Changes Marked in Red Front setback The proposed zoning code allows for an accessory structure to be in the side yard but keeps it set back from the front of the house. Rear setback, alley The proposed zoning code has added this standard. Accessory structure coverage of rear yard The proposed zoning code removes this standard as overall building coverage controls ground cover and the size of accessory structures. Overall building height The proposed zoning code reduces the height to prevent accessory structures from being taller than the principal building.

Other Dimensional Standards For development standards regarding principal buildings, including density, lot size and coverage, see the R-150 and R-200 Zoning Comparison fact sheets.

a project of the Montgomery County Planning Department ZoningMontgomery.org

Based on November 22, 2011 Article 59-4. Zoning District Regulations ZAP Draft

You might also like