Scribd
Upload
129 views

TOC Pipelines

This technical training document provides an overview of subsea pipeline design and installation for engineers at L&T Valdel in Bangalore, India. It covers topics like the different types of offshore pipelines; design methodology and codes/standards; route selection; installation methods; environmental parameters considered in design like water depth and seabed conditions; wall thickness and stability design; installation analysis; flexibility considerations; and special design challenges. The training was delivered from July 14-24, 2007 by Dr. S. Nallayarasu of IIT Madras to educate the engineers on pipeline engineering.

Uploaded by

Surendra Reddy Kancharla
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
129 views

TOC Pipelines

This technical training document provides an overview of subsea pipeline design and installation for engineers at L&T Valdel in Bangalore, India. It covers topics like the different types of offshore pipelines; design methodology and codes/standards; route selection; installation methods; environmental parameters considered in design like water depth and seabed conditions; wall thickness and stability design; installation analysis; flexibility considerations; and special design challenges. The training was delivered from July 14-24, 2007 by Dr. S. Nallayarasu of IIT Madras to educate the engineers on pipeline engineering.

Uploaded by

Surendra Reddy Kancharla
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL TRAINING ON

SUBSEA PIPELINES

for

L&T Valdel Engineers at Bangalore

by
Dr. S. Nallayarasu

DEPARTMENT OF OCEAN ENGINEERING INDIAN INSTITUTE OF TECHNOLOGY MADRAS CHENNAI 600 036 14th to 24th JULY 2007

TABLE OF CONTENTS
1.0 Introduction toOffshore pipelines Type Of Pipelines Design Methodology Design Cycle Codes and Standards Route Selection Pipeline Size Pipeline Installation Methods Reel Barge Method Lay Barge Method Bottom Pull Method Float and Sink Method Pipeline Design Environmental Parameters Water Depth Wave and Current Loads Seabed Conditions Hydrodynamic Coefficients Wall Thickness Design External Pressure Internal Pressure Code Provisions Stability Design Vertical Stability Horizontal Stability Pipeline Free Span Static Free Span Dynamic Span Pipeline Installation Analysis Static Pipelay Analysis Dynamic Pipelay Analysis Pipeline Flexibility Thermal Expansion Expansion Loops Pipeline Anchors Special Considerations Local buckling and Propagation Pipeline Crossings

2.0

3.0

You might also like