Datasheet

Welcome To Advanced Cable Ties, Inc.
Founded in 1994, Advanced Cable Ties, Inc. (ACT) is a full-line manufacturer of cable ties and
accessories used in industrial/fastener, electronic, electrical, HVAC, and a variety of other specialty
applications.
Superior Quality
ACT has been ISO-9002 registered since 1999 and recently acquired an upgrade to ISO-9001:2000 by
the Quality Management Institute. ACT is a fully automated state-of-the-art molding facility. We
manufacture superior cable ties that combine the lowest insertion force with the highest tensile strength.
All ACT products meet the UL (1565), and CSA (C22.2) safety standards in both the U.S. and Canada,
as well as U.S. Military (Mil-S-23190) standards.
Innovative Design
The design of the pawl (locking mechanism) makes ACT cable ties superior in strength and allows our
products to exceed the required tensile strengths used in industry standards. ACTs mounting pad
incorporates a unique no-slip tab that holds cable ties in place during installation. ACTs Cobra cable
tie incorporates a grooved head design to flex around smaller bundles while providing a low profile to
eliminate snags and abrasions.
Commitment to Customer Satisfaction
We maintain our industry leadership by our total commitment to customer satisfaction. We build strong
partnerships to promote productivity, innovation and long- term profitability for our customers. ACT
sells only through authorized distributors and ships from five strategically-located warehouses to
accommodate our customers tight delivery requirements. ACT also provides knowledgeable local
manufacturers representatives to assist you.
Table Of Contents
Miniature Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Intermediate & Standard Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Heavy Duty, Extra Heavy Duty, & 250 lb. Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . 3
Color & Fluorescent Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
ACTPACs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
ACTKITs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tote Box Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Cobra Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Push Mount Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Mounting Hole Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Screw Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Mounting Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Low Profile Screw Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Stainless Steel Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Halar & Tefzel Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Beaded Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Releasable Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Identification and Flag Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Tension Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cloth Wire Marker Booklets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
0-9 Mini Dispensers & Write-Wrap Dispensers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Light Duty Nylon Cable Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Heavy Duty Nylon Cable Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Split Loom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cable Wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Vinyl Insulated Ring Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Vinyl Insulated Spade Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Quick Splicers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Vinyl Insulated Butt Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Fully Insulated Male & Female Disconnects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Vinyl Insulated Male & Female Disconnects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Vinyl Insulated Piggyback Disconnects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Vinyl Insulated Male Snap Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Nylon Insulated Female Snap Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Nylon Pigtails - Seamless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Heat Shrink Butt Connectors, Ring Terminals, & Spade Terminals . . . . . . . . . . . . . . . . . . 24
Heat Shrink Fully Insulated Female & Male Disconnects . . . . . . . . . . . . . . . . . . . . . . . . 25
Heat Shrink Tubing - Adhesive Lined . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Crimp Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ACTCAPs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Part Number Cross Reference Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28
Conversion Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Mil-Spec Cable Tie Reference Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
UL, CSA, and CAGE Code References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Cable Tie Operating Characteristics Reference Chart . . . . . . . . . . . . . . . . . . . . . . . . 30
Tel: 800-861-7228 - email: [email protected]

Fax: 978-630-3999 - Web: www.advancedcableties.com
Reading ACT Part Numbers

Company
Identification &
Package Type
AL=ACT Packaging
AP=Plain Packaging
AR=Repack/Custom Label
Tensile Strength
18 lb.
40 lb.
50 lb.
120 lb.
150 lb.
175 lb.
250 lb.
AL-07-50-MH-9-C
Amounts
Per Package
M = 1,000
D = 500
C = 100
L = 50
Q = 25
X = 10
Cable Tie
Length
Tie Type
ID=Identification
FL=Flag
MH=Mounting Hole
RL=Releasable
SS=Stainless Steel
LP=Low Profile
BD=Beaded
TZ=Tefzel
HL=Halar
PM=Push Mount
TB= Tote Box
Colors
0=UV Black
1=Brown
2=Red
3=Orange
4=Yellow
5=Green
6=Blue
7=Purple
8=Gray
9=Natural
11=Fluorescent Green
12=Fluorescent Pink
13=Fluorescent Yellow
14=Fluorescent Orange
15=Fluorescent Blue
30=Heat Stabilized Black
ORDER POLICY
Products Supplied and Sold Strictly to Approved ACT Distributors Only
All Payments in U.S. Currency
Terms: Net 30 days
All Products are 100% Guaranteed
Minimum order: $100.00
Line items will be increased or decreased by 10% to meet full case quantities
UL, CSA and Mil-Spec markings available only on ACT labeled and custom labeled product
Repack minimum order: $100.00 and full case quantities per line item
Allow 2-3 weeks for repacks, custom labels, tote box ties, heat stabilized ties and colored ties
FOB: Free freight applies to any standard ground shipment from Massachusetts
Warehouse to one location within the continental U.S. for any single release purchase order
in excess of $2,000.00
For Non-Standard Product Documentation (Chemical & Physical Report, PPAP,
Etc.) a $75.00 fee will be applied per part number
Prices are subject to change without notice
All International Customers are responsible for GST (Goods and Service Tax), all
Taxes and Duties, Tariffs and Brokerage Fees. Customer is to specify Brokerage
Firm. UPS (United Parcel Service) Brokerage Service will be utilized on UPS
shipments unless otherwise specified
RETURN POLICY
Returns accepted only with written ACT Return Materials Authorization (RMA)
from the manufacturing facility
All returns are subject to a 15% re-stocking fee
Requests to return material must be initiated within 90 days from the date of the
original purchase and product must be returned within 90 days after request is initiated
No Returns accepted on Special Orders, Special Packaging, and Custom Label
WIDTH
THICKNESS
LENGTH
Miniature (18 lb) Natural, UV Black & Heat Stabilized Black

Per
Bag
ACT
Part Number
Color &
Material
Length
Inch/mm
Width
Inch/mm
Thickness
Tie
Inch/mm Tensile
Bundle
Diameter
Per
Case
1,000
AL-04-18-9-M
Natural
25,000
100
AL-04-18-9-C
Nylon
10,000
1,000
AL-04-18-0-M
UV Black
100
AL-04-18-0-C
Nylon
1,000
AL-04-18-30-M
Heat Stabilized
25,000
100
AL-04-18-30-C
Black Nylon
10,000
1,000
AL-06-18-9-M
Natural
100
AL-06-18-9-C
Nylon
1,000
AL-06-18-0-M
UV Black
100
AL-06-18-0-C
Nylon
1,000
AL-06-18-30-M
Heat Stabilized
100
AL-06-18-30-C
Black Nylon
1,000
AL-08-18-9-M
Natural
100
AL-08-18-9-C
Nylon
1,000
AL-08-18-0-M
UV Black
100
AL-08-18-0-C
Nylon
1,000
AL-08-18-30-M
Heat Stabilized
100
AL-08-18-30-C
Black Nylon
4.0/101.6
.094/2.387
.042/1.066
18 lb.
1/16 - 7/8
25,000
10,000
6.1/154.9
.094/2.387
.042/1.066
18 lb.
1/16 - 1 1/2
20,000
8.1/205.7
.094/2.387
.042/1.066
18 lb.
1/16 - 2 3/16
20,000
* Tolerance: .xxx = +-.005, .xx = +-.015, Fraction = +-1/32

* 4, 6 & 8 UL Recognized / CSA Approved
Mil-Spec
Reference
MS3367-4-9
MS3367-4-0
* 2 Week Delivery Time For Heat Stabilized Ties

Intermediate (40 lb) Natural, UV Black & Heat Stabilized Black

Per
Bag
ACT
Part Number
Color &
Material
1,000
AL-05-40-9-M
Natural
100
AL-05-40-9-C
Nylon
1,000
AL-05-40-0-M
UV Black
100
AL-05-40-0-C
Nylon
1,000
AL-05-40-30-M
Heat Stabilized
100
AL-05-40-30-C
Black Nylon
1,000
AL-08-40-9-M
Natural
100
AL-08-40-9-C
Nylon
1,000
AL-08-40-0-M
UV Black
100
AL-08-40-0-C
Nylon
1,000
AL-08-40-30-M
Heat Stabilized
100
AL-08-40-30-C
Black Nylon
100
AL-11-40-9-C
Natural Nylon
100
AL-11-40-0-C
UV Black Nylon
100
AL-14-40-9-C
Natural Nylon
100
AL-14-40-0-C
UV Black Nylon
Length
Inch/mm
Width
Thickness
Tie
Inch/mm Inch/mm Tensile
Bundle
Diameter
Per
Case
Mil-Spec
Reference
MS3367-5-9
5.7/144.7
.140/3.556
.049/1.244
40 lb.
1/16 - 1 7/16
20,000
8.8/223.5
.140/3.556
.049/1.244
40 lb.
1/16 - 2 3/8
10,000
11.5/292.1
.142/3.606
.055/1.397
40 lb.
1/16 - 3 3/8
5,000
14.5/368.3
.142/3.606
.055/1.397
40 lb.
1/16 - 4
5,000

* 5 & 8 UL Recognized / CSA Approved
MS3367-5-0
Standard (50 lb) Natural, UV Black & Heat Stabilized Black

Per
Bag
ACT
Part Number
Color &
Material
1,000
AL-07-50-9-M
Natural
100
AL-07-50-9-C
Nylon
1,000
AL-07-50-0-M
UV Black
100
AL-07-50-0-C
Nylon
1,000
AL-07-50-30-M
Heat Stabilized
100
AL-07-50-30-C
Black Nylon
500
AL-11-50-9-D
Natural
100
AL-11-50-9-C
Nylon
500
AL-11-50-0-D
UV Black
100
AL-11-50-0-C
Nylon
500
AL-11-50-30-D
Heat Stabilized
100
AL-11-50-30-C
Black Nylon
500
AL-14-50-9-D
Natural
100
AL-14-50-9-C
Nylon
500
AL-14-50-0-D
UV Black
100
AL-14-50-0-C
Nylon
Heat Stabilized
500
AL-14-50-30-D
100
AL-14-50-30-C
Black Nylon
100
AL-17-50-9-C
Natural Nylon
100
AL-17-50-0-C
UV Black Nylon
Length
Inch/mm
Width
Thickness
Tie
Bundle
Diameter
Per
Case
Mil-Spec
Reference
MS3367-1-9
7.5/190.5
.178/4.521
.053/1.346
50 lb.
1/16 - 1 7/8
10,000
MS3367-1-0
MS3367-7-9
11.2/284.4 .178/4.521
.053/1.346
50 lb.
1/16 - 3 1/16
5,000
MS3367-7-0
MS3367-2-9
14.5/368.3 .178/4.521
.053/1.346
50 lb.
1/16 - 4 1/8
5,000
17.0/432.0 .190/4.826
.053/1.346
50 lb.
1/16 - 4 3/4
5,000

* 7, 11 & 14 UL Recognized / CSA Approved
MS3367-2-0

Heavy Duty (120 lb) Natural, UV Black & Heat Stabilized Black
Per
ACT
Bag Part Number
Color &
Material
Width
Length
Thickness
Tie
Inch/mm Inch/mm Inch/mm Tensile
Bundle
Diameter
Per
Case
3/16 - 2 1/16
3,000
Mil-Spec
Reference
100 AL-08-120-9-C Natural Nylon

100 AL-08-120-0-C
UV Black Nylon
8.7/220.9
.300/7.620
.075/1.900
120 lb.
100 AL-08-120-30-C Heat Stabilized Black

100 AL-14-120-9-C Natural
50 AL-14-120-9-L
100 AL-14-120-0-C
50 AL-14-120-0-L
MS3367-3-9
Nylon
UV Black
Nylon
15.1/383.5 .300/7.620
.075/1.900
120 lb.
3/16 - 4 1/16
2,000
17.75/450.8 .300/7.620
.075/1.900
120 lb.
3/16 - 5 1/4
1,000
24.2/614.6 .300/7.620
.075/1.900
120 lb.
3/16 - 7
500
28.0/711.2 .300/7.620
.075/1.900
120 lb.
3/16 - 8
500
MS3367-3-0
100 AL-14-120-30-C Heat Stabilized

50 AL-14-120-30-L Black
50 AL-18-120-9-L
Natural Nylon
50 AL-18-120-0-L
UV Black Nylon
50 AL-24-120-9-L
Natural Nylon
50 AL-24-120-0-L
UV Black Nylon
50 AL-28-120-9-L
Natural Nylon
50 AL-28-120-0-L
UV Black Nylon

* 8 & 14 UL Recognized / CSA Approved
Extra Heavy Duty (175 lb) Natural, UV Black & Gray

Per
ACT
Bag Part Number
Color &
Material
50 AL-24-175-9-L
Natural Nylon
50 AL-24-175-0-L
UV Black Nylon
50 AL-33-175-9-L
Natural Nylon
50 AL-33-175-0-L
UV Black Nylon
50 AL-36-175-9-L
Natural Nylon
50 AL-36-175-0-L
UV Black Nylon
50 AL-48-175-9-L
Natural Nylon
50 AL-48-175-8-L
Gray Nylon
50 AL-48-175-0-L
UV Black Nylon
Width
Length
Thickness
Tie
Bundle
Diameter
Per
Case
25.3/642.6 .340/8.636
.090/2.286
175 lb.
3/16 - 7 3/16
500
33.1/840.7 .340/8.636
.090/2.286
175 lb.
3/16 - 9 3/4
500
37.1/942.3 .340/8.636
.090/2.286
175 lb.
3/16 - 11
500
48.5/1231.9 .340/8.636
.090/2.286
175 lb.
3/8 - 14 1/2
500
Mil-Spec
Reference
MS3367-10-9
MS3367-10-0
MS3367-12-9
MS3367-12-0
MS3367-13-9
MS3367-13-0
MS3367-16-9
MS3367-16-8
MS3367-16-0

* 24, 33, 36 & 48 UL Recognized / CSA Approved
250 lb Series Natural & UV Black

Per
ACT
Bag Part Number
Color &
Material
100 AL-22-250-9-C
Natural Nylon
100 AL-22-250-0-C
UV Black Nylon
Length
Width
Thickness
Tie
22.8/579.1 .50/12.70
.080/2.032
250 lb.
Bundle
Diameter
Per
Case
3/16 - 6
500
Mil-Spec
Reference

13
11
15
14
12
Photo does not represent actual color of ties. Please contact Customer Service for a 7 50lb color sample.
Color # Chart
1=Brown
2=Red
3=Orange
4=Yellow
5=Green
6=Blue
7=Purple
8=Gray
11=Fluorescent
12=Fluorescent
13=Fluorescent
14=Fluorescent
15=Fluorescent
WIDTH
Green*
Pink*
Yellow*
Orange*
Blue*
THICKNESS
LENGTH
*Military Specifications Do Not Apply To Fluorescent Colors
4 (18 lb) Color & Fluorescent

Per
Bag
ACT
Part Number
1,000
AL-04-18-#-M
Colors
1,000
AL-04-18-#-M
Fluorescents
Color
Length
Inch/mm
Width
Inch/mm
Thickness
Tie
Inch/mm Tensile
Bundle
Diameter
Per
Case
4.0/101.6
.094/2.387
.042/1.066
1/16 - 7/8
25,000
18 lb.

* UL Recognized / CSA Approved
Mil-Spec
Reference
MS3367-4-#
* 2 Week Delivery Time For Color Ties

Per
Bag
ACT
Part Number
1,000
AL-05-40-#-M
Colors
1,000
AL-05-40-#-M
Fluorescents
Color
Length
Inch/mm
Width
Inch/mm
Thickness
Tie
Inch/mm Tensile
5.7/144.7
.140/3.556
.049/1.244

40 lb.
Bundle
Diameter
Per
Case
1/16 - 1 7/16
20,000
Mil-Spec
Reference
MS3367-5-#


Per
Bag
ACT
Part Number
1,000
AL-08-40-#-M
Colors
1,000
AL-08-40-#-M
Fluorescents
Color
Length
Inch/mm
Width
Inch/mm
Thickness
Tie
Inch/mm Tensile
8.8/223.5
.140/3.556
.049/1.244
40 lb.

Bundle
Diameter
Per
Case
1/16 - 2 3/8
10,000
Mil-Spec
Reference

Per
Bag
ACT
Part Number
1,000
AL-07-50-#-M
Colors
1,000
AL-07-50-#-M
Fluorescents
Color
Length
Inch/mm
Width
Inch/mm
Thickness
Tie
Inch/mm Tensile
Bundle
Diameter
Per
Case
7.5/190.5
.178/4.521
.053/1.346
1/16 - 1 7/8
10,000
50 lb.

Mil-Spec
Reference
MS3367-1-#

Per
Bag
ACT
Part Number
500
AL-11-50-#-D
Colors
500
AL-11-50-#-D
Fluorescents
Color
Length
Inch/mm
Width
Inch/mm
11.2/284.48
.178/4.521
Thickness
Tie
Inch/mm Tensile
.053/1.346
50 lb.

Bundle
Diameter
Per
Case
1/16 - 3 1/16
5,000
Mil-Spec
Reference
MS3367-7-#

Per
Bag
ACT
Part Number
500
AL-14-50-#-D
Colors
500
AL-14-50-#-D
Fluorescents
Color
Length
Inch/mm
Width
Inch/mm
Thickness
Tie
Inch/mm Tensile
Bundle
Diameter
Per
Case
14.5/368.3
.178/4.521
.053/1.346
1/16 - 4 1/8
5,000

50 lb.
Mil-Spec
Reference
MS3367-2-#

Standard ACTPAC
Total
Pcs
400
ACT
Part Number
AL-ACTPAC-400-9
Clam Shell Dimensions:

15 x 7 1/8 x 2 PVC
400
Cable Tie Pcs Per

Part #
ACTPAC
11-50-9
07-50-9
04-18-9
100
100
200
Color &
Material
Natural Nylon
Natural Nylon
Natural Nylon
AL-ACTPAC-400-0
11-50-0
100
UV Black Nylon
07-50-0
100
UV Black Nylon
04-18-0
200
UV Black Nylon
* UL Recognized / CSA Approved Cable Ties
15 x 7 1/8 x 2 PVC
Tie Length
Tie
Inch/mm Tensile
11.2/284.4
7.5/190.5
4.0/101.6
11.2/284.4
7.5/190.5
4.0/101.6
50 lb.
50 lb.
18 lb.
Bundle
Diameter
Mil-Spec
Reference
Per
Case
1/16 - 3 1/16
1/16 - 1 7/8
1/16 - 7/8
MS3367-7-9
MS3367-1-9
MS3367-4-9
20
50 lb.
1/16 - 3 1/16
MS3367-7-0
50 lb.
1/16 - 1 7/8
MS3367-1-0
20
18 lb.
1/16 - 7/8
MS3367-4-0
* Sold In Case Quantities Only - Mixed Cases Available
Tension Tool ACTPAC

Total
Pcs
ACT
Part Number
401 AL-ACTPAC-401-A100-9
15 x 7 1/8 x 2 PVC
Cable Tie Pcs Per

Part #
ACTPAC
11-50-9
07-50-9
04-18-9
AL-100
100
100
200
1
Color &
Material
Tie Length
Tie
Inch/mm Tensile
Bundle
Diameter
Mil-Spec
Reference
Natural Nylon
11.2/284.4
50 lb.
1/16 - 3 1/16
MS3367-7-9
Natural Nylon
7.5/190.5
50 lb.
1/16 - 1 7/8
MS3367-1-9
Natural Nylon
4.0/101.6
18 lb.
1/16 - 7/8
MS3367-4-9
Twist Cut Off Tension Tool for 18 to 50 lb. Cable Ties
Per
Case
20
11-50-0
100
UV Black Nylon 11.2/284.4
50 lb.
1/16 - 3 1/16
MS3367-7-0
07-50-0
100
UV Black Nylon
7.5/190.5
50 lb.
1/16 - 1 7/8
MS3367-1-0
20
04-18-0
200
UV Black Nylon
4.0/101.6
18 lb.
1/16 - 7/8
MS3367-4-0
15 x 7 1/8 x 2 PVC
AL-100
1
401 AL-ACTPAC-401-A100-0

Yellow & Red Wire Connector ACTPAC

Total
Pcs
ACT
Part Number
250 AL-ACTPAC-250-YWRD-9
15 x 7 1/8 x 2 PVC
Cable Tie Pcs Per

Part #
ACTPAC
11-50-9
07-50-9
ACN-YW
ACN-RD
100
100
25
25
Color &
Material
Natural Nylon
Natural Nylon
Yellow
Red
250 AL-ACTPAC-250-YWRD-0
11-50-0
100
UV Black Nylon
07-50-0
100
UV Black Nylon
ACN-YW
25
Yellow
15 x 7 1/8 x 2 PVC
ACN-RD
25
Red
Tie Length
Tie
Inch/mm Tensile
Bundle
Diameter
Mil-Spec
Reference
11.2/284.4
50 lb.
1/16 - 3 1/16
MS3367-7-9
7.5/190.5
50 lb.
1/16 - 1 7/8
MS3367-1-9
Narrow Wire Connectors 3 #18 thru 3 #12 600V
Per
Case
20
11.2/284.4
50 lb.
1/16 - 3 1/16
MS3367-7-0
7.5/190.5
50 lb.
1/16 - 1 7/8
MS3367-1-0
20
* UL Listed / CSA Approved Wire Connectors
Blue Wire Connector ACTPAC

Total
Pcs
300
ACT
Part Number
AL-ACTPAC-300-BL-9

15 x 7 1/8 x 2 PVC
300
Cable Tie Pcs Per

Part #
ACTPAC
11-50-9
07-50-9
ACS-BL
100
100
100
Color &
Material
Natural Nylon
Natural Nylon
Blue
Tie Length
Tie
Inch/mm Tensile
Bundle
Diameter
Mil-Spec
Reference
11.2/284.4
50 lb.
1/16 - 3 1/16
MS3367-7-9
7.5/190.5
50 lb.
1/16 - 1 7/8
MS3367-1-9
Standard Wire Connectors 1 #18 + 1 #22 thru 3 #16 600V
Per
Case
20
AL-ACTPAC-300-BL-0
11-50-0
100
50 lb.
1/16 - 3 1/16
MS3367-7-0
07-50-0
100
50 lb.
1/16 - 1 7/8
MS3367-1-0
20
ACS-BL
100
Blue
Standard Wire Connectors 1 #18 + 1 #22 thru 3 #16 600V
* UL Listed / CSA Approved Wire Connectors
15 x 7 1/8 x 2 PVC
3/4 Mounting Pad ACTPAC

Total
Pcs
ACT
Part Number
300 AL-ACTPAC-300-MP750-9
15 x 7 1/8 x 2 PVC
Cable Tie Pcs Per

Part #
ACTPAC
11-50-9
07-50-9
MP-750-9
100
100
100
Color &
Material
Natural Nylon
Natural Nylon
Natural Nylon
300 AL-ACTPAC-300-MP750-0
11-50-0
100
UV Black Nylon
07-50-0
100
UV Black Nylon
MP-750-0
100
UV Black Nylon
* UL Recognized / CSA Approved Cable Ties & Mounting Pads
15 x 7 1/8 x 2 PVC
Tie Length
Tie
Inch/mm Tensile
Bundle
Diameter
Mil-Spec
Reference
11.2/284.4
50 lb.
1/16 - 3 1/16
MS3367-7-9
7.5/190.5
50 lb.
1/16 - 1 7/8
MS3367-1-9
.75 / #4 Screw / 18-50 lb Ties / Rubber Adhesive
Per
Case
20
11.2/284.4
50 lb.
1/16 - 3 1/16
MS3367-7-0
20
7.5/190.5
50 lb.
1/16 - 1 7/8
MS3367-1-0
1 Mounting Pad ACTPAC

Total
Pcs
ACT
Part Number
250 AL-ACTPAC-250-MP1000-9
15 x 7 1/8 x 2 PVC
Cable Tie Pcs Per

Part #
ACTPAC
11-50-9
07-50-9
MP-1000-9
100
100
50
Color &
Material
Natural Nylon
Natural Nylon
Natural Nylon
11-50-0
100
UV Black Nylon
07-50-0
100
UV Black Nylon
MP-1000-0
50
UV Black Nylon
250 AL-ACTPAC-250-MP1000-0
15 x 7 1/8 x 2 PVC
Tie Length
Tie
Inch/mm Tensile
Bundle
Diameter
Mil-Spec
Reference
11.2/284.4
50 lb.
1/16 - 3 1/16
MS3367-7-9
7.5/190.5
50 lb.
1/16 - 1 7/8
MS3367-1-9
1 / #6 Screw / 18-50 lb Ties / Rubber Adhesive
Per
Case
20
11.2/284.4
50 lb.
1/16 - 3 1/16
MS3367-7-0
7.5/190.5
50 lb.
1/16 - 1 7/8
MS3367-1-0
20

w
e
N
ACTKIT
Total
Pcs
ACT
Part Number
Cable Tie
Part #
Pcs Per
ACTKIT
Color &
Material
801
AL-ACTKIT-801-9
04-18-9
05-40-9
07-50-9
14-50-9
07-50-MH-9
07-50-LP-9
MP-750-9
MP-1000-9
AL-100
100
100
100
100
100
100
100
100
1
Natural Nylon
Natural Nylon
Natural Nylon
Natural Nylon
Natural Nylon
Natural Nylon
Natural Nylon
Natural Nylon
Red
4.0/101.6
18 lb.
1/16 - 7/8
MS3367-4-9
5.7/144.7
40 lb. 1/16 - 1 7/16
MS3367-5-9
7.5/190.5
50 lb.
1/16 - 1 7/8
MS3367-1-9
14.5/368.3
50 lb.
1/16 - 4 1/8
MS3367-2-9
8.1/205.7
50 lb.
1/16 - 1 3/4
7.5/190.5
50 lb.
3/8 - 1 3/4
MS3367-23-9
04-18-0
05-40-0
07-50-0
14-50-0
07-50-MH-0
07-50-LP-0
MP-750-0
MP-1000-0
AL-100
100
100
100
100
100
100
100
100
1
UV Black Nylon
UV Black Nylon
UV Black Nylon
UV Black Nylon
UV Black Nylon
UV Black Nylon
UV Black Nylon
UV Black Nylon
Red
4.0/101.6
18 lb.
1/16 - 7/8
MS3367-4-0
5.7/144.7
40 lb. 1/16 - 1 7/16
MS3367-5-0
7.5/190.5
50 lb.
1/16 - 1 7/8
MS3367-1-0
14.5/368.3
50 lb.
1/16 - 4 1/8
MS3367-2-0
8.1/205.7
50 lb.
1/16 - 1 3/4
7.5/190.5
50 lb.
3/8 - 1 3/4
MS3367-23-0
Case Dimensions
18 x 11 3/4 x 2 1/2
801
AL-ACTKIT-801-0
Case Dimensions
18 x 11 3/4 x 2 1/2
Tie Length
Tie
Inch/mm Tensile
Bundle
Diameter

Mil-Spec
Reference
Per
Case
* Sold In Case Quantities Only
w
e
N
Tote Box
Restricted Bundle Diameter
Per
Bag
ACT
Part Number
Color &
Material
1,000
AP-05-40-TB-3-M
Orange Nylon
Length Strap Width Strap Thick. Restricted

Inch/mm
Inch/mm Inch/mm Diameter
Per
Case
5.7/144.7
20,000

* 2 Week Delivery Time
.140/3.556
.049/1.244
3/4
* Sold In Case Quantities Only

w
e
N
WIDTH
THICKNESS
LENGTH
Cobra Series (50 lb & 120 lb)

Per
Bag
ACT
Part Number
Color &
Material
1,000
AL-07-50-LP-9-M
100
AL-07-50-LP-9-C
1,000
AL-07-50-LP-0-M
100
AL-07-50-LP-0-C
100
AL-14-120-LP-9-C
50
AL-14-120-LP-9-L
100
AL-14-120-LP-0-C
Length
Inch/mm
Width
Thickness Tie
Bundle
Inch/mm Inch/mm Tensile Diameter
Per
Case
Natural Nylon
MS3367-23-9
7.5/190.5
.178/4.521
.053/1.346
50 lb.
3/8 - 1 3/4
10,000
UV Black Nylon
50 AL-14-120-LP-0-L
* Approximate Dimensions
Mil-Spec
Reference
MS3367-23-0
Natural Nylon
MS3367-25-9
15.1/383.5 .300/7.620
.075/1.900
120 lb. 9/16 - 3 1/2
2,000
UV Black Nylon
MS3367-25-0
* 7 UL Recognized / CSA Approved
w
e
N
Push Mount
Per
Bag
ACT
Part Number
Color &
Material
100
AL-07-50-PM-9-C
Natural Nylon
100
AL-07-50-PM-0-C
UV Black Nylon
Length Strap Width Strap Thick.

Tie
Inch/mm Inch/mm
Inch/mm Tensile
8.0/203.2
.190/7.826
.055/1.397
50 lb.
Bundle
Diameter
Hole
Size
Panel
Thickness
Per
Case
1 7/8
1/4
.14/3.55
5,000

10
WIDTH
THICKNESS
LENGTH
Mounting Hole - Natural & UV Black

Per
Bag
ACT
Part Number
Color &
Material
100
AL-05-30-MH-9-C
Natural Nylon
100
AL-05-30-MH-0-C
UV Black Nylon
1,000
AL-07-50-MH-9-M
Natural
100
AL-07-50-MH-9-C
Nylon
1,000
AL-07-50-MH-0-M
UV Black
100
AL-07-50-MH-0-C
Nylon
100
AL-11-50-MH-9-C
Natural Nylon
100
AL-11-50-MH-0-C
UV Black Nylon
100
AL-14-50-MH-9-C
Natural Nylon
100
AL-14-50-MH-0-C
UV Black Nylon
100
AL-14-120-MH-9-C Natural Nylon
100
AL-14-120-MH-0-C UV Black Nylon
Length Strap Width Strap Thick.

Tie
Inch/mm
Bundle
Diameter
Per
Case
Screw
Size
6.0/152.4
.140/3.55
.048/1.210
30 lb.
1/16 - 1 1/4
10,000
NO. 8
8.1/205.7
.178/4.52
.053/1.350
50 lb.
1/16 - 1 3/4
5,000
NO. 10
11.8/300.0
.189/4.80
.050/1.270
50 lb.
1/16 - 3
5,000
NO. 10
14.5/370.0
.189/4.80
.060/1.524
50 lb.
1/16 - 4
5,000
NO. 10
.075/1.900
120 lb.
3/16 - 4 1/16
2,000
1/4
15.66/397.7 .300/7.620
* 7 UL Recognized / CSA Approved
WIDTH
LENGTH
HEIGHT
Screw Mounts
SM1 #6 Screw / SM2 1/4 Screw
Per
Bag
ACT
Part Number
Color &
Material
100
AL-SM1-9-C
Natural Nylon
100
AL-SM1-0-C
UV Black Nylon
100
AL-SM2-9-C
Natural Nylon
100
AL-SM2-0-C
UV Black Nylon
Length
Inches/mm
Height
Inches/mm
Width
Inches/mm
Slot Height
Inches/mm
Slot Width
Inches/mm
Per
Case
.590/14.98
.270/6.858
.370/9.398
.0625/1.587
.190/4.826
15,000
.870/22.09
.380/9.652
.640/16.256
.125/3.175
.300/7.620
5,000

11
WIDTH
LENGTH
SLOT WIDTH
HEIGHT
SLOT HEIGHT
Mounting Pads
MP-750 #4 Screw / MP-1000 #6 Screw
Per
Bag
ACT
Part Number
Color &
Material
100
AL-MP-750-9-C
Natural Nylon
100
AL-MP-750-0-C
Black Nylon
100
AL-MP-1000-9-C
Natural Nylon
100
AL-MP-1000-0-C
Black Nylon
100
AL-MPA-750-9-C
Natural Nylon
100
AL-MPA-750-0-C
Black Nylon
100
AL-MPA-1000-9-C
Natural Nylon
100
AL-MPA-1000-0-C
Black Nylon
100
AL-MP-750-SA-9-C
Natural Nylon
100
AL-MP-750-SA-0-C
Black Nylon
100
AL-MP-1000-SA-9-C
Natural Nylon
100
AL-MP-1000-SA-0-C
Black Nylon
100
AL-MP-750-NT-9-C
Natural Nylon
100
AL-MP-750-NT-0-C
Black Nylon
100
AL-MP-1000-NT-9-C
Natural Nylon
100
AL-MP-1000-NT-0-C
Black Nylon
Length
Inches/mm
Height
Inches/mm
Adhesive
Slot Height
Inches/mm
Slot Width
Inches/mm
Per
Case
.74/18.7
.19/4.8
Rubber
.05/1.2
.20/5.1
10,000
.99/25.1
.20/5.0
Rubber
.06/1.5
.20/5.1
5,000
.74/18.7
.19/4.8
Acrylic
.05/1.2
.20/5.1
10,000
.99/25.1
.20/5.0
Acrylic
.06/1.5
.20/5.1
5,000
.74/18.7
.19/4.8
Sticky
.05/1.2
.20/5.1
10,000
.99/25.1
.20/5.0
Sticky
.06/1.5
.20/5.1
5,000
.74/18.7
.19/4.8
None
.05/1.2
.20/5.1
15,000
.99/25.1
.20/5.0
None
.06/1.5
.20/5.1
10,000
* UL Recognized / CSA Approved Excluding Sticky Adhesive
* 3-4 Week Delivery and 5,000 Piece Minimum Order For Acrylic And Sticky Adhesive
Low Profile Screw Mounts

#8 Screw
Per
Bag
ACT
Part Number
Color &
Material
Length
Inches/mm
Height
Inches/mm
Width
Inches/mm
Slot Height
Inches/mm
Slot Width
Inches/mm
Per
Case
100
AL-LPM1-9-C
Natural Nylon
.75/19.05
.12/3.04
.50/12.70
.062/1.574
.180/4.57
20,000

12
WIDTH
THICKNESS
.010
.245mm
LENGTH
Stainless Steel (150 lb)

Per
Bag
ACT
Part Number
Material
Length
Inch/mm
Width
Inch/mm
Tie
Tensile
Max Bundle
Diameter
Per
Case
100
AL-08-150-SS-C
304 Stainless Steel
8.40/213.36
.187/4.749
150 lb.
1,000
100
AL-14-150-SS-C
304 Stainless Steel
14.90/378.46
.187/4.749
150 lb.
1,000
100
AL-20-150-SS-C
304 Stainless Steel
20.90/530.86
.187/4.749
150 lb.
1,000
100
AL-27-150-SS-C
304 Stainless Steel
27.40/695.96
.187/4.749
150 lb.
1,000
WIDTH
THICKNESS
LENGTH
Halar Series (18 lb & 50 lb)

Per
Bag
ACT
Part Number
Material
Length
Inch/mm
Width
Thickness Tie
Bundle
Diameter
Per
Case
100
AL-04-18-HL-C
Halar
4.0/101.6
.094/2.387
.042/1.066
18 lb.
1/16 - 7/8
25,000
100
AL-08-50-HL-C
Halar
8.0/203.2
* Halar is a trademark of Ausimont Chemical Company.
.178/4.521
.053/1.346
50 lb.
1/16 - 2
5,000
Bundle
Diameter
Per
Case
Tefzel Series (18 lb & 50 lb)

Per
Bag
ACT
Part Number
Material
Length
Inch/mm
100
AL-04-18-TZ-C
Tefzel
4.0/101.6
.094/2.387
.042/1.066
18 lb.
1/16 - 7/8
25,000
7.0/177.8
.178/4.521
.053/1.346
50 lb.
1/16 - 1 7/8
5,000
Tefzel
100
AL-07-50-TZ-C
* Tefzel is a trademark of DuPont Corporation.
Width
Thickness Tie

13
Beaded
Per
Bag
ACT
Part Number
Color &
Material
Length
Inch/mm
Head W.
Inch/mm
Head L. Bead Dia. Bead to Bundle

Inch/mm Inch/mm
Bead Diameter
Per
Case
100
AL-04-BD-9-C
Natural Nylon
4.0/101.6
.20/5.08
.35/8.89
.09/2.28
.13/3.30
20,000
100
AL-06-BD-9-C
Natural Nylon
6.0/152.4
.29/7.36
.57/14.47
.11/2.79
.17/4.31
1 1/2
15,000
100
AL-08-BD-9-C
Natural Nylon
8.93/226.8
.38/9.65
.85/21.59
.15/3.81
.29/7.36
2 1/2
5,000
WIDTH
THICKNESS
LENGTH
Releasable (50 lb)

Per
Bag
ACT
Part Number
Color &
Material
100
AL-05-50-RL-9-C
Natural Nylon
100
AL-05-50-RL-0-C
UV Black Nylon
100
AL-08-50-RL-9-C
Natural Nylon
100
AL-08-50-RL-0-C
UV Black Nylon
100
AL-12-50-RL-9-C
Natural Nylon
100
AL-12-50-RL-0-C
UV Black Nylon
Length
Inch/mm
Width
Inch/mm
Thickness
Inch/mm
Tie
Tensile
Bundle
Diameter
Per
Case
5.9/149.8
.298/7.569
.050/1.270
50 lb.
1/8 - 1 1/4
5,000
7.87/200.0
.298/7.569
.053/1.346
50 lb.
1/8 - 2
5,000
11.875/301.6 .314/7.97
.054/1.371
50 lb.
1/8 - 3
3,000

14
WIDTH
THICKNESS
LENGTH
WIDTH
THICKNESS
LENGTH
LENGTH
WIDTH
4 Horizontal
ID Tie
THICKNESS
7 & 14 Vertical
ID Tie
4 Flag
Tie
60
Identification & Flag
Per
Bag
ACT
Part Number
Material
& Color
Length
Inch/mm
Width
Inch/mm
Thickness
Inch/mm
Tie
Tensile
Bundle
Diameter
Pad
Size
Per
Case
100
AL-04-18-ID-9-C
Natural Nylon
4.0/101.6
.100/2.54
.044/1.117
18 lb.
1/16 - 7/8
5/16" x 1"
10,000
100
AL-04-18-FL-9-C
Natural Nylon
4.3/110.0
.100/2.54
.044/1.117
18 lb.
1/16 - 7/8
5/16" x 1"
10,000
100
AL-07-50-ID-9-C
Natural Nylon
7.8/200.0
.181/4.59
.055/1.397
50 lb.
1/16 - 1 7/8
1/2" x 1 1/8"
5,000
100
AL-14-50-ID-9-C
Natural Nylon
14.1/358.1
.187/4.749
.055/1.397
50 lb.
3/8 - 4
1/2" x 2 1/4"
5,000
AL-100
AL-200
AL-300
AL-900
Tension Tools
Per
Box
ACT
Part Number
AL-100
Description
Twist Cut Off Tension Tool for 18-50 lb. Ties
AL-200
Automatic Cut Off and Adjustable Tension Tool for 18-50 lb. Ties
AL-300
Manual Cut Off Heavy Duty Tension Tool for 120-175 lb. Ties
AL-900
Manual Cut Off Tension Tool for Stainless Steel Ties

15
AL-MARK-15/16
AL-MARK-100
AL-MARK-01/11
Cloth Wire Marker Booklets

ACT
Part Number
AL-MARK-01
Imprint
Markers
per imprint
60 (0-4)
0-9
Overall Booklet
Dimensions
Marker
Dimensions
Quantity
Per Booklet
3 3/8 x 5 3/4
.25 x 1.25
450
10
3 3/8 x 5 3/4
.25 x 1.25
450
30 (5-9)
A-Z
AL-MARK-02
0 - 15
+, -, /
AL-MARK-03
1 - 45
10
3 3/8 x 5 3/4
.25 x 1.25
450
AL-MARK-04
1, 2, 3
150
3 3/8 x 5 3/4
.25 x 1.25
450
AL-MARK-05
A, B, C
150
3 3/8 x 5 3/4
.25 x 1.25
450
AL-MARK-06
T1, T2, T3
150
3 3/8 x 5 3/4
.25 x 1.25
450
AL-MARK-07
L1, L2, L3
150
3 3/8 x 5 3/4
.25 x 1.25
450
AL-MARK-08
46 - 90
10
3 3/8 x 5 3/4
.25 x 1.25
450
AL-MARK-09
10 NEMA Colors
45
3 3/8 x 5 3/4
.25 x 1.25
450
342
3 3/8 x 5 3/4
.25 x 1.25
342
79
3 3/8 x 5 3/4
.25 x 1.50
90
+, -, AC, DC, Pos.,

AL-MARK-10
Neg., Neut., Gnd, Spare,

Blank
Circuit Breaker legends:
Kitchen Outlets, Range,
AL-MARK-11
Bath 1 Lights, Dryer, etc.

79 imprints; various legends
Blank
11
Mini Dispenser & Identification Tape

ACT
Part Number
Item
Description
AL-MARK-15
0-9 Mini Dispenser
Dispenses 1/4 x 1 1/4 pre-cut markers with legends (76 each)
AL-MARK-16
0-9 Re-fill Rolls
Box of 10 refill rolls with legends (76 each)
AL-MARK-100
Write-Wrap Dispenser
3/4 x 1 1/4 markers - 300 per dispenser

16
Light Duty Nylon Cable Clamps

3/8 Wide - #10 Screw
Per
Bag
ACT
Part Number
Color &
Material
100
AL-CCL-125-9-C
Natural Nylon
100
AL-CCL-125-0-C
Black Nylon
100
AL-CCL-187-9-C
Natural Nylon
100
AL-CCL-187-0-C
Black Nylon
100
AL-CCL-250-9-C
Natural Nylon
100
AL-CCL-250-0-C
Black Nylon
100
AL-CCL-312-9-C
Natural Nylon
100
AL-CCL-312-0-C
Black Nylon
100
AL-CCL-375-9-C
Natural Nylon
100
AL-CCL-375-0-C
Black Nylon
100
AL-CCL-437-9-C
Natural Nylon
100
AL-CCL-437-0-C
Black Nylon
100
AL-CCL-500-9-C
Natural Nylon
100
AL-CCL-500-0-C
Black Nylon
Mounting
Hole
Inch/mm
Closed
Diameter
Inch/mm
Center to
Center
Inch/mm
Thickness
Inch/mm
Per
Case
.203/5.156
.125/3.175
.343/8.712
.050/1.270
10,000
.203/5.156
.187/4.749
.378/9.601
.050/1.270
10,000
.203/5.156
.250/6.350
.421/10.693
.050/1.270
10,000
.203/5.156
.312/7.924
.441/11.201
.050/1.270
10,000
.203/5.156
.375/9.525
.464/11.785
.050/1.270
5,000
.203/5.156
.437/11.099
.500/12.700
.050/1.270
5,000
.203/5.156
.500/12.700
.530/13.462
.050/1.270
5,000

17
CLOSED
DIAMETER
THICKNESS
CENTER TO CENTER
MOUNTING HOLE
Heavy Duty Nylon Cable Clamps

1/2 Wide - #10 Screw
Per
Bag
ACT
Part Number
Color &
Material
100
AL-CCL2-250-9-C
Natural Nylon
100
AL-CCL2-250-0-C
Black Nylon
100
AL-CCL2-312-9-C
Natural Nylon
100
AL-CCL2-312-0-C
Black Nylon
100
AL-CCL2-375-9-C
Natural Nylon
100
AL-CCL2-375-0-C
Black Nylon
100
AL-CCL2-437-9-C
Natural Nylon
100
AL-CCL2-437-0-C
Black Nylon
100
AL-CCL2-500-9-C
Natural Nylon
100
AL-CCL2-500-0-C
Black Nylon
100
AL-CCL2-625-9-C
Natural Nylon
100
AL-CCL2-625-0-C
Black Nylon
100
AL-CCL2-687-9-C
Natural Nylon
100
AL-CCL2-687-0-C
Black Nylon
100
AL-CCL2-750-9-C
Natural Nylon
100
AL-CCL2-750-0-C
Black Nylon
100
AL-CCL2-875-9-C
Natural Nylon
100
AL-CCL2-875-0-C
Black Nylon
100
AL-CCL2-1000-9-C
Natural Nylon
100
AL-CCL2-1000-0-C
Black Nylon
Mounting
Hole
Inch/mm
Closed
Diameter
Inch/mm
Center to
Center
Inch/mm
Thickness
Inch/mm
Per
Case
.203/5.156
.250/6.350
.437/11.099
.060/1.524
10,000
.203/5.156
.312/7.924
.474/12.039
.060/1.524
5,000
.203/5.156
.375/9.525
.500/12.700
.060/1.524
5,000
.203/5.156
.437/11.099
.533/13.538
.060/1.524
5,000
.203/5.156
.500/12.700
.553/14.046
.060/1.524
5,000
.203/5.156
.625/15.875
.625/15.875
.060/1.524
3,000
.203/5.156
.687/17.449
.665/16.891
.060/1.524
3,000
.203/5.156
.750/19.050
.699/17.754
.060/1.524
3,000
.203/5.156
.875/22.225
.795/20.193
.060/1.524
2,000
.203/5.156
1.000/25.400
.825/20.955
.060/1.524
2,000

18
Split Loom - UV Black Polyethylene

Per
Roll
ACT
Part Number
100'
AL-SLPE-250-0-C
3200
AL-SLPE-250-0-B
Material
Color
Min. Inside
Diameter
Inches
Max. Outside
Diameter
Inches
Tolerance
Polyethylene
UV Black
.239
.400
+-.030
Polyethylene
UV Black
.351
.526
+-.030
Polyethylene
UV Black
.473
.700
+-.030
Polyethylene
UV Black
.603
.839
+-.030
Polyethylene
UV Black
.707
.989
+-.030
Polyethylene
UV Black
1.006
1.320
+-.030
100'
AL-SLPE-375-0-C
1900
AL-SLPE-375-0-B
100'
AL-SLPE-500-0-C
1100
AL-SLPE-500-0-B
100'
AL-SLPE-625-0-C
800
AL-SLPE-625-0-B
100'
AL-SLPE-750-0-C
500
AL-SLPE-750-0-B
100'
AL-SLPE-1000-0-C
300
AL-SLPE-1000-0-B
250
AL-SLPE-1250-0-B
Polyethylene
UV Black
1.207
1.493
+-.030
150
AL-SLPE-1500-0-B
Polyethylene
UV Black
1.566
1.932
+-.030
* Material Characteristics May Affect Dimensions.

19
Cable Wrap - Forward Cut Polyethylene

Per
Roll
ACT
Part Number
Color
100'
AL-CWP-125-9-C
Natural
100'
AL-CWP-125-0-C
UV Black
100'
AL-CWP-187-9-C
Natural
100'
AL-CWP-187-0-C
UV Black
100'
AL-CWP-250-9-C
Natural
100'
AL-CWP-250-0-C
UV Black
100'
AL-CWP-375-9-C
Natural
100'
AL-CWP-375-0-C
UV Black
100'
AL-CWP-500-9-C
Natural
100'
AL-CWP-500-0-C
UV Black
100'
AL-CWP-625-9-C
Natural
100'
AL-CWP-625-0-C
UV Black
100'
AL-CWP-750-9-C
Natural
100'
AL-CWP-750-0-C
UV Black
100'
AL-CWP-1000-9-C
Natural
100'
AL-CWP-1000-0-C
UV Black
Material
Outside
Diameter
Inches
Min-Max
Bundle
Wall
Thickness
Polyethylene
.125
1/8 to 1/2
.032
Polyethylene
.187
3/16 to 1 1/2
.030
Polyethylene
.250
1/4 to 2
.045
Polyethylene
.375
3/8 to 3
.052
Polyethylene
.500
1/2 to 4
.062
Polyethylene
.625
5/8 to 4 1/2
.062
Polyethylene
.750
3/4 to 5
.065
Polyethylene
1.000
1 to 7
.080

20
BARREL
CENTER LENGTH
WIDTH
LENGTH
Vinyl Insulated Ring Terminals

Per
Bag
ACT Part #
100
AL-R4A-6-C
100
AL-R4A-8-C
100
AL-R4A-10-C
100
AL-R4A-14-C
100
AL-R4A-56-C
100
AL-R4A-38-C
100
AL-R4B-6-C
100
AL-R4B-8-C
100
AL-R4B-10-C
100
AL-R4B-14-C
100
AL-R4B-56-C
100
AL-R4B-38-C
100
AL-R4C-6-C
100
AL-R4C-8-C
100
AL-R4C-10-C
100
AL-R4C-14-C
100
AL-R4C-56-C
100
AL-R4C-38-C
* UL Listed - CSA Approved
* 600 Volts
Copper
Cond.
Range
Stud
Size
Color &
Material
Max.
Stock
Size
Insul.
Diam.
22-18
22-18
22-18
22-18
22-18
22-18
16-14
16-14
16-14
16-14
16-14
16-14
12-10
12-10
12-10
12-10
12-10
12-10
6
8
10
1/4
5/16
3/8
6
8
10
1/4
5/16
3/8
5-6
8
10
1/4
5/16
3/8
Red Vinyl
.030
Red Vinyl
Approx. Dimensions in Inches

L
.145
.80
.25
.22
.250
.030
.145
.90
.33
.29
.250
Red Vinyl
.030
.145
1.08
.47
.40
.250
Red Vinyl
Blue Vinyl
.030
.030
.145
.170
1.13
.80
.56
.25
.40
.22
.250
.250
Blue Vinyl
.030
.170
.90
.33
.29
.250
Blue Vinyl
.030
.170
1.08
.47
.40
.250
Blue Vinyl
.030
.170
1.13
.56
.40
.250
Yellow Vinyl
.040
.250
1.03
.38
.29
.250
Yellow Vinyl
.040
.250
1.26
.53
.44
.250
Yellow Vinyl
.040
.250
1.29
.59
.44
.250
Per
Case
10,000
10,000
10,000

21
BARREL
CENTER LENGTH
WIDTH
LENGTH
Vinyl Insulated Spade Terminals - Butted Seam

Per
Bag
100
100
100
100
100
100
100
100
100
ACT Part #
Copper
Cond.
Range
Stud
Size
AL-S4A-6-C
AL-S4A-8-C
AL-S4A-10-C
AL-S4B-6-C
AL-S4B-8-C
AL-S4B-10-C
AL-S4C-6-C
AL-S4C-8-C
AL-S4C-10-C
22-18
22-18
22-18
16-14
16-14
16-14
12-10
12-10
12-10
6
8
10
6
8
10
4-6
8
10
Color &
Material
Max.
Stock
Size
Red Vinyl
.030
Blue Vinyl
Yellow Vinyl
Approx. Dimensions in Inches

Insul.
Diam.
Per
Case
.145
.85
.30
.25
.250
10,000
.030
.170
.85
.30
.25
.250
10,000
.032
.250
1.03
.32
.29
.250
10,000

* 600 Volts
Quick Splicers
Per
Bag
ACT
Part Number
Color &
Material
Wire
Range
Per
Case
100
100
AL-PLA-C
Red Vinyl
22-18 Tap / 18-14 Run
3,000
AL-PLB-C
Blue Vinyl
18-16 Tap / 14 Run
3,000
Yellow Vinyl
12-10 Tap / 10 Run
3,000
100
AL-PLC-C
* A-PLB-C & A-PLC-C Are UL Listed
* 600 Volts
LENGTH
Vinyl Insulated Butt Connectors

Per
Bag
100
100
100
* UL Listed
* 600 Volts
ACT Part #
AL-B4A-C
AL-B4B-C
AL-B4C-C
- CSA Approved
Copper
Cond.
Range
Color &
Material
Stock
Size
Max.
Insul.
Diam.
Length
Per
Case
22-18
16-14
12-10
Red Vinyl
Blue Vinyl
Yellow Vinyl
.030
.030
.040
.145
.170
.250
1.00
1.00
1.02
10,000
10,000
5,000

22
Fully Insulated Female Disconnects

Per
Bag
ACT Part #
Copper
Cond.
Range
100 AL-CFR4NA250F-C 22-18

100 AL-CFR4NB250F-C 16-14
* 600 Volts
Tab
Thickness
x Width
Length
Per
Case
.032 x .250
.032 x .250
.87
.87
10,000
10,000
Fully Insulated Male Disconnects

Per
Bag
ACT Part #
Copper
Cond.
Range
100 AL-CM4TNA250F-C 22-18

100 AL-CM4TNB250F-C 16-14
* 600 Volts
Tab
Thickness
x Width
Length
.032 x .250
.032 x .250
WIDTH
Per
Case
.95
.95
LENGTH
10,000
10,000
BARREL
LENGTH
BARREL
LENGTH
WIDTH
WIDTH
LENGTH
LENGTH
Vinyl Insulated Male Disconnects - Butted Seam

Per
Bag
ACT Part #
100
AL-MT4A250-C
100
AL-MT4B250-C
100
AL-MT4C250-C
* 600 Volts
Copper
Cond.
Range
Color &
Material
Stock
Size
Max.
Insul.
Diam.
22-18
16-14
12-10
Red Vinyl
Blue Vinyl
Yellow Vinyl
.032
.032
.032
.145
.170
.250
Approx Dimensions in inches
Per
Case
.93
.93
1.05
.250
.250
.250
.250
.250
.250
10,000
10,000
10,000
Vinyl Insulated Female Disconnects - Butted Seam

Per
Bag
ACT Part #
100
AL-FR4A250-C
100
AL-FR4B250-C
100
AL-FR4C250-C
* 600 Volts
Copper
Cond.
Range
Color &
Material
Stock
Size
Max.
Insul.
Diam.
22-18
16-14
12-10
Red Vinyl
Blue Vinyl
Yellow Vinyl
.032
.032
.032
.145
.145
.250
L
.87
.87
.95
Per
Case
.250
.250
.250
.250
.250
.250
10,000
10,000
10,000

23
L
Vinyl Insulated Piggyback Disconnects

Per
Bag
ACT Part #
100
AL-PBA-C
100
AL-PBB-C
* 600 Volts
Copper
Cond.
Range
Color &
Material
Width
Thick.
22-18
16-14
Red Vinyl
Blue Vinyl
.250
.250
.032
.032
Length
Barrel
Length
Max.
Insul.
Dia.
Per
Case
.870
.870
.230
.230
.145
.170
10,000
10,000
Vinyl Insulated Male Snap Plugs

Per
Bag
ACT Part #
100
100
100
* UL Listed
* 600 Volts
WIDTH
LENGTH
AL-SC4A-C
AL-SC4B-C
AL-SC4B1-C
- CSA Approved
Copper
Cond.
Range
Color &
Material
Stud
Size
Length
Barrel
Length
Per
Case
22-18
16-14
16-14
Red Vinyl
Blue Vinyl
Blue Vinyl
.156
.156
.180
.85
.85
.85
.190
.190
.190
10,000
10,000
10,000
Nylon Insulated Female Snap Plugs

Per
Bag
WIDTH
LENGTH
ACT Part #
100 AL-FSCA-156F-C
22-18
100
AL-FSC-156F-C
16-14
100
AL-FSC1-156F-C
16-14
* UL Recognized - CSA Approved
* 600 Volts
Material
Stud
Size
Length
Barrel
Length
Per
Case
Nylon
Nylon
Nylon
.156
.156
.180
1.02
1.02
1.02
.250
.250
.250
10,000
10,000
10,000
Nylon Pigtails - Seamless
BARREL
LENGTH
INSIDE
DIAMETER
LENGTH
Copper
Cond.
Range
Per
Bag
Copper
Cond.
Range
ACT Part #
100
AL-NPAB1-C
100
AL-NPBC1-C
* 600 Volts
22-14
18-10

L
I.D.
Per
Case
.76
.85
.31
.34
.091
.152
10,000
10,000

24
BARREL
CENTER LENGTH
WIDTH
LENGTH
BARREL
CENTER LENGTH
BARREL
LENGTH
WIDTH
LENGTH
LENGTH
Heat Shrink Butt Connectors

Per
Bag
ACT Part #
25
AL-B4A-HS-Q
25
AL-B4B-HS-Q
25
AL-B4C-HS-Q
Copper
Cond.
Range
Color
Stock
Size
Barrel
Length
Length
Per
Case
22-18
16-14
12-10
Red
Blue
Yellow
.031
.031
.031
.280
.300
.380
1.20
1.30
1.50
10,000
10,000
10,000
Heat Shrink Ring Terminals

Per
Bag
ACT Part #
25 AL-R4A-10-HS-Q
25 AL-R4B-10-HS-Q
25 AL-R4B-14-HS-Q
25 AL-R4B-56-HS-Q
25 AL-R4B-38-HS-Q
25 AL-R4C-10-HS-Q
25 AL-R4C-14-HS-Q
25 AL-R4C-38-HS-Q
Copper
Cond.
Range
Stud
Size
Color
22-18
16-14
16-14
16-14
16-14
12-10
12-10
12-10
10
10
1/4
5/16
3/8
10
1/4
3/8
Red
Blue
Blue
Blue
Blue
Yellow
Yellow
Yellow
Width Center Length

.310
.310
.470
.470
.560
.380
.590
.590
.200
.200
.260
.330
.280
.210
.290
.290
1.00
1.00
1.10
1.10
1.10
1.10
1.20
1.20
Stock
Size
Barrel
Length
Per
Case
.030
.030
.030
.030
.030
.040
.040
.040
.250
.250
.250
.250
.250
.250
.250
.250
10,000
Stock
Size
Barrel
Length
Per
Case
.030
.030
.030
.030
.030
.030
.040
.040
.250
.250
.250
.250
.250
.250
.250
.250
10,000
10,000
Heat Shrink Spade Terminals

Per
Bag
ACT Part #
25 AL-S4A-6-HS-Q
25 AL-S4A-8-HS-Q
25 AL-S4A-10-HS-Q
25 AL-S4B-6-HS-Q
25 AL-S4B-8-HS-Q
25 AL-S4B-10-HS-Q
25 AL-S4C-8-HS-Q
25 AL-S4C-10-HS-Q
Copper
Cond.
Range
Stud
Size
Color
22-18
22-18
22-18
16-14
16-14
16-14
12-10
12-10
6
8
10
6
8
10
8
10
Red
Red
Red
Blue
Blue
Blue
Yellow
Yellow
Width Center Length

.250
.250
.320
.250
.300
.320
.320
.320
.250
.250
.250
.250
.250
.250
.280
.280
.90
.90
.90
.90
.90
.90
1.00
1.00
10,000
10,000
10,000

25
BARREL
LENGTH
WIDTH
Dia.
LENGTH
Heat Shrink Fully Insulated Female Disconnects

Per
Bag
25
25
25
ACT Part #
Copper
Cond.
Range
AL-CFR4NA250F-HS-Q
AL-CFR4NB250F-HS-Q
AL-CFR4NC250F-HS-Q
22-18
16-14
12-10
Color
Tab
Width x
Thickness
Width
Dia.
Red
Blue
Yellow
.250 x .032
.250 x .032
.250 x .032
.370
.370
.390
.230
.230
.320
Barrel
Length Length
1.20
1.20
1.20
Barrel
I.D.
Per
Case
.080
.080
.080
10,000
10,000
10,000
.250
.250
.250
Heat Shrink Fully Insulated Male Disconnects

Per
Bag
25
25
25
ACT Part #
Copper
Cond.
Range
AL-CM4TNA250F-HS-Q
AL-CM4TNB250F-HS-Q
AL-CM4TNC250F-HS-Q
22-18
16-14
12-10
Color
Tab
Width x
Thickness
Width
Dia.
Red
Blue
Yellow
.250 x .032
.250 x .032
.250 x .032
.440
.440
.470
.300
.300
.390
Barrel
Length Length
1.20
1.20
1.20
Barrel
I.D.
Per
Case
.065
.085
.150
10,000
10,000
10,000
.250
.250
.250
Heat Shrink Tubing - Adhesive Lined

Dia.
Inch/mm
Length
Inch/mm
Recovered
Inch/mm
Per
Case
10
AL-HSTU-125-0-X Black Polyolefin .125/3.175
12.0/304.8
.040/1.016
2,000
10
12.0/304.8
.062/1.574
2,000
10
12.0/304.8
.080/2.032
1,000
10
12.0/304.8
.120/3.048
500
10
AL-HSTU-500-0-X Black Polyolefin .500/12.700 12.0/304.8
.160/4.064
200
Per
Bag
ACT
Part #
Color &
Material
Crimp Tool
Per
Box
1
ACT
Part
Number
TH-450
26-6 AWG HeavyDescription

Duty Crimp & Strip Tool.

26
ACTCAP - Standard
Per
Bag
ACT
Part Number
Color &
Material
Wire Range Wire Range

Min.
Max.
Voltage
Per
Case
100
AL-ACS-GY-C
Gray Thermoplastic
1#18+1#22
2#16
300
10,000
100
AL-ACS-BL-C
Blue Thermoplastic
1#18+1#22
3#16
300
10,000
100
AL-ACS-OR-C
Orange Thermoplastic 1#18+1#20
3#16+1#18
600
5,000
100
AL-ACS-YW-C
Yellow Thermoplastic
3#18
3#12
600
3,000
100
AL-ACS-RD-C
Red Thermoplastic
2#14
2#10
600
2,000
* UL Listed & CSA Approved
ACTCAP - Narrow
Per
Bag
ACT
Part Number
Color &
Material
100
AL-ACN-OR-C
Orange Thermoplastic 1#18+1#20
100
AL-ACN-YW-C
Red Thermoplastic
100
AL-ACN-RD-C

Min.
Max.
Voltage
Per
Case
3#16+1#18
600
5,000
3#18
3#12
600
5,000
2#14
2#10
600
3,000
Voltage
Per
Case
ACTCAP - Wing
Per
Bag
ACT
Part Number
Color &
Material

Min.
Max.
100
AL-ACW-YW-C
2#16+1#18
3#14
600
3,000
100
AL-ACW-TN-C
Tan Thermoplastic
3#16
3#12
600
3,000
100
AL-ACW-RD-C
Red Thermoplastic
2#14+1#16
4#12
600
2,000

27
Cross References
Cable Tie Cross Reference
ACT Part #
Catamount
Panduit
Richco
Vision / G&B
Tyton
T&B
AL-04-18-9-M
L-4-18-9-M
PLTIM-M
WIT-18R-M
4-18-N-1000
T18R
TY23M
AL-04-18-9-C
L-4-18-9-C
PLTIM-C
WIT-18R-C
4-18-N-100
T18R-C
TY523M
AL-04-18-0-M
L-4-18-0-M
PLTIM-MO
WIT-18R-BLK-M
4-18-UV-1000
T18R-0
TY23MX
AL-04-18-0-C
L-4-18-0-C
PLTIM-CO
WIT-18R-BLK-C
4-18-UV-100
T18R-0-C
TY523MX
AL-08-18-9-M
L-8-18-9-M
PLT2M-M
WIT-18V-M
8-18-N-1000
T18L
TY232M
AL-08-18-9-C
L-8-18-9-C
PLT2M-C
WIT-18V-C
8-18-N-100
T18L-C
TY5232M
AL-08-18-0-M
L-8-18-0-M
PLT2M-M0
WIT-18V-BLK-M
8-18-UV-1000
T18L-0
TY232MX
AL-08-18-0-C
L-8-18-0-C
PLT2M-C0
WIT-18V-BLK-C
8-18-UV-100
T18L-0-C
TY5232-MX
AL-05-40-9-M
L-5-30-9-M
PLTI.5I-M
WIT-30R-M
6-30-N-1000
T30R
TY24M
AL-05-40-9-C
L-5-30-9-C
PLTI.5I-C
WIT-30R-C
6-30-N-100
T30R-C
TY524M
AL-05-40-0-M
L-5-30-0-M
PLTI.5I-MO
WIT-30R-BLK-M
6-30-UV-1000
T30R-0
TY24MX
AL-05-40-0-C
L-5-30-0-C
PLTI.5I-CO
WIT-30R-BLK-C
6-30-UV-100
T30R-0-C
TY524MX
AL-08-40-9-M
L-8-40-9-M
PLT2I-M
WIT-40L-M
8-30-N-1000
T40R
TY242M
AL-08-40-9-C
L-8-40-9-C
PLT2I-C
WIT-40L-C
8-30-N-100
T40R-C
TY5242M
AL-08-40-0-M
L-8-40-0-M
PLT2I-M0
WIT-40L-BLK-M
8-30-UV-1000
T40R-0
TY242MX
AL-08-40-0-C
L-8-40-0-C
PLT2I-C0
WIT-40L-BLK-C
8-30-UV-100
T40R-0-C
TY5242MX
AL-11-40-9-D
L-11-40-9-M
PLT3I-M
WIT-40VL-M
11-45-N-1000
T401
TY26M
AL-11-40-9-C
L-11-40-9-C
PLT3I-C
WIT-40VL-C
11-45-N-100
T401C
TY526M
AL-11-40-0-D
L-11-40-0-M
PLT3I-M0
WIT-40VL-BLK-M
11-45-UV-1000
T401-0
TY26MX
AL-11-40-0-C
L-11-40-0-C
PLT3I-C0
WIT-40VL-BLK-C
11-45-UV-100
T401-0-C
TY526MX
AL-14-40-9-D
L-14-40-9-M
PLT4I-M
T40L
TY244M
AL-14-40-9-C
L-14-40-9-C
PLT4I-C
T40L-C
TY5244M
AL-14-40-0-D
L-14-40-0-M
PLT4I-MO
T40L-0
TY244MX
AL-14-40-0-C
L-14-40-0-C
PLT4I-C0
T40L-0-C
TY5244MX
AL-07-50-9-M
L-7-50-9-M
PLT2S-M
WIT-50R-M
7-50-N-1000
T50R
TY25M
AL-07-50-9-C
L-7-50-9-C
PLT2S-C
WIT-50R-C
7-50-N-100
T50R-C
TY525M
AL-07-50-0-M
L-7-50-0-M
PLT2S-M0
WIT-50R-BLK-M
7-50-UV-1000
T50R-0
TY25MX
AL-07-50-0-C
L-7-50-0-C
PLT2S-C0
WIT-50R-BLK-C
7-50-UV-100
T50R-0-C
TY525MX
AL-11-50-9-D
L-11-50-9-D
PLT3S-M
WIT-60R-M
11-50-N-1000
T501
TY253M
AL-11-50-9-C
L-11-50-9-C
PLT3S-C
WIT-60R-C
11-50-N-100
T501-C
TY5253M
AL-11-50-0-D
L-11-50-0-D
PLT3S-M0
WIT-60R-BLK-M
11-50-UV-1000
T501-0
TY253MX
AL-11-50-0-C
L-11-50-0-C
PLT3S-C0
WIT-60R-BLK-C
11-50-UV-100
T501-0-C
TY5253MX
AL-14-50-9-D
L-14-50-9-D
PLT4S-M
WIT-50L-M
14-50-N-1000
T50L
TY28M
AL-14-50-9-C
L-14-50-9-C
PLT4S-C
WIT-50L-C
14-50-N-100
T50L-C
TY528M
AL-14-50-0-D
L-14-50-0-D
PLT4S-M0
WIT-50L-BLK-M
14-50-UV-1000
T50L-0
TY28MX
TY528MX
AL-14-50-0-C
L-14-50-0-C
PLT4S-C0
WIT-50L-BLK-C
14-50-UV-100
T50L0-C
AL-14-120-9-C
L-14-120-9-C
PLT4H-L
WIT-120R-C
14-175-N-100
T120R
TY27M
AL-14-120-0-C
L-14-120-0-C
PLT4H-L0
WIT-120R-BLK-C
14-175-UV-100
T120R-0
TY27MX
AL-24-175-9-L
L-24-175-9-L
PLT6H-L
WIT-175R-L
24-175-N-50
T150M
AL-24-175-0-L
L-24-175-0-L
PLT6H-L0
WIT-175R-L-UVB
24-175-UV-50
T150-M0
AL-36-175-9-L
L-36-175-9-L
36-175-N-50
T150LL
TY53510M
AL-36-175-0-L
L-36-175-0-L
36-175-UV-50
T150LL-0
TY53510MX
AL-48-175-9-L
L-48-175-9-L
PLT13H-C -43
48-175-N-50
T150XLL9
TY54513M -45
AL-48-175-8-L
L-48-175-8-L
48-175-UV-50
T150XLL0
AL-48-175-0-L
L-48-175-0-L
PLT13H-C0 -43
* Please contact Customer Service for companies and parts not listed.
TY54513MX -45

28
Mounting Hole Cable Tie Cross Reference

ACT Part #
Catamount
Panduit
Richco
Vision / G&B
Tyton
T&B
AL-05-30-MH-9-M
L-5-30MH-9-M
PLCI.51-S8-M
WITS-8-50MS-M
6M-30-N-1000
T30MR
TY34M
AL-05-30-MH-9-C
L-5-30MH-9-C
PLCI.51-S8-C
WITS-8-50MS-C
6M-30-N-100
T30MR-C
TY534M
AL-05-30-MH-0-M
L-5-30MH-0-M
PLCI.51-S8-M0
WITS-8-50MS-UVB-M
6M-30-UV-1000
T30MR-0-C
TY34MX
AL-05-30-MH-0-C
L-5-30MH-0-C
PLCI.51-S8-C0
WITS-8-50MS-UVB-C
6M-30-UV-100
T30MR-C
TY534MX
AL-07-50-MH-9-M
L-7-50MH-9-M
PLC2S-S10-M
WITS-8-50MRL-M
7M-50-N-1000
T50MR
TY35M
AL-07-50-MH-9-C
L-7-50MH-9-C
PLC2S-S10-C
WITS-8-50MRL-C
7M-50-N-100
T50MR-0-C
TY535M
AL-07-50-MH-0-M
L-7-50MH-0-M
PLC2S-S10-M0
WITS-50MRL-BLK-M
7M-50-UV-1000
T40MR-0
TY35MX
AL-07-50-MH-0-C
L-7-50MH-0-C
PLC2S-S10-C0
WITS-50MRL-BLK-C
7M-50-UV-100
T50MR-0-C
TY535MX
AL-11-50-MH-9-D
L-11-50MH-9-D
PLC3S-S10-M
WITS-11-50MR-M
11M-50-N-1000
AL-11-50-MH-9-C
L-11-50MH-9-C
PLC3S-S10-C
WITS-11-50MR-C
11M-50-N-100
AL-11-50-MH-0-D
L-11-50MH-0-D
PLC3S-S10-M0
WITS-11-50MR-BLK-M
11M-50-UV-1000
AL-11-50-MH-0-C
L-11-50MH-0-C
PLC3S-S10-C0
WITS-11-50MR-BLK-C
11M-50-UV-100
AL-14-50-MH-9-D
L-14-50MH-9-D
PLC4S-S10-M
WITS-10-50ML-M
14M-50-N-1000
T50ML
TY354M
AL-14-50-MH-9-C
L-14-50MH-9-C
PLC4S-S10-C
WITS-10-50ML-C
14M-50-N-100
T50ML-C
TY5354M
AL-14-50-MH-0-D
L-14-50MH-0-D
PLC4S-S10-M0
WITS-10-50ML-BLK-M
14M-50-UV-1000
T50ML-0
TY354MX
TY5354MX
AL-14-50-MH-0-C
A-14-50MH-0-C
PLC4S-S10-C0
WITS-10-50ML-BLK-C
14M-50-UV-100
T50ML-0-C
AL-14-120-MH-9-C
L-14-120MH-9-C
PLC4H-S25-L
WITS-14-120MR-C
14M-175-N-100
T120MR
TY37M
AL-14-120-MH-0-C
L-14-120MH-0-C
PLC4H-S25-L0
WITS-14-120MR-BLK-C
14M-175-UV-100
T120MR-0
TY37MX
I.D. Cable Tie Cross Reference

ACT Part #
Catamount
Panduit
Richco
Vision / G&B
Tyton
T&B
AL-04-18-ID-9-M
L-4-18ID-9-M
PLMIM-M
WIT-F1-18R-M
4ID-18-N-1000
IT18R
TY51M
AL-04-18-ID-9-C
L-4-18ID-9-C
PLMIM-C
WIT-F1-18R-C
4ID-18-N-100
IT18R-C
TY551M
AL-04-18-FL-9-M
PLFIM-M
WIT-F2-18R-M
4IDE-18-N-1000
IT18FL
TY53M
AL-04-18-FL-9-C
PLFIM-C
WIT-F2-18R-C
4IDE-18-N-100
1T18FL-C
TY553M
AL-07-50-ID-9-M
L-7-50ID-9-M
PLM2S-M
WIT-F3-50R-M
8ID-50-N-1000
IT50R
TY46M
AL-07-50-ID-9-C
L-7-50ID-9-C
PLM2S-C
WIT-F3-50R-C
8ID-50-N-100
IT50R-C
TY546M
AL-14-50-ID-9-D
PLM4S-D
WIT-F3-50L-M
IT50L
TY48M
AL-14-50-ID-9-C
PLM4S-C
WIT-F3-50L-C
IT50L-C
TY548M
Mounting Pad Cross Reference

ACT Part #
Catamount
Panduit
Richco
Vision / G&B
Tyton
T&B
AL-MP-750-9-C
MPNY-750-9-C
ABMM-A-C
FTH-5A-RT-M
MB-10
MB3A10C2
TC344A
AL-MP-750-0-C
MPNY-750-0-C
ABMM-AT-C0
FTH-5A-RT-UVB-M
MB-10UVB
MB3A0C2
TC344AX
AL-MP-1000-9-C
MPNY-1000-9-C
ABM2S-A-C
FTH-7A-RT-M
MB-20
MB4A10C2
TC345A
AL-MP-1000-0-C
MPNY-1000-0-C
ABM2S-AT-C0
FTH-7A-RT-UVB-M
MB-20-UVB
MB4A0C2
TC345AX

29
English Fraction & Decimal - Metric Conversion Chart

Fractions
Decimals
Millimeters
Fractions
Decimals
Millimeters
1/64
.015625
0.397
33/64
.515625
13.097
1/32
.03125
0.794
17/32
.53125
13.494
3/64
.046875
1.191
35/64
.546875
13.891
1/16
.0625
1.588
9/16
.5625
14.288
5/64
.078125
1.984
37/64
.578125
14.684
3/32
.09375
2.381
19/32
.59375
15.081
7/64
.109375
2.778
39/64
.609375
15.478
1/8
.1250
3.175
5/8
.6250
15.875
9/64
.140625
3.572
41/64
.640625
16.272
5/32
.15625
3.969
21/32
.65625
16.669
11/64
.171875
4.366
43/64
.671875
17.066
3/16
.1875
4.763
11/16
.6875
17.463
13/64
.203125
5.159
45/64
.703125
17.859
7/32
.21875
5.556
23/32
.71875
18.256
15/64
.234375
5.953
47/64
.734375
18.653
1/4
.2500
6.350
3/4
.7500
19.050
17/64
.265625
6.747
49/64
.765625
19.447
9/32
.28125
7.144
25/32
.78125
19.844
19/64
.296875
7.541
51/64
.796875
20.241
5/16
.3125
7.938
13/16
.8125
20.638
21/64
.328125
8.334
53/64
.828125
21.034
11/32
.34375
8.731
27/32
.84375
21.431
23/64
.359375
9.128
55/64
.859375
21.828
3/8
.3750
9.525
7/8
.8750
22.225
25/64
.390625
9.922
57/64
.890625
22.622
13/32
.40625
10.319
29/32
.90625
23.019
27/64
.421875
10.716
59/64
.921875
23.416
7/16
.4375
11.113
15/16
.9375
23.813
29/64
.453125
11.509
61/64
.953125
24.209
15/32
.46875
11.906
31/32
.96875
24.606
31/64
.484375
12.303
63/64
.984375
25.003
1/2
.5000
12.700
1.000
25.400

30
Military Specification Reference Chart

Mil-Spec
ACT P/N
Color
Mil-Spec
ACT P/N
Color
MS-3367-1-0
A-07-50-0-
UV Black
MS-3367-2-7
A-14-50-7-
Purple
MS-3367-1-9
A-07-50-9-
Natural
MS-3367-2-8
A-14-50-8-
Grey
MS3367-1-1
A-07-50-1-
Brown
MS-3367-3-0
A-14-120-0-
MS-3367-1-2
A-07-50-2-
Red
MS-3367-3-9
MS-3367-1-3
A-07-50-3-
Orange
MS-3367-1-4
A-07-50-4-
MS-3367-1-5
MS-3367-1-6
Mil-Spec
ACT P/N
Color
Mil-Spec
ACT P/N
MS-3367-5-3
A-05-40-3-
Orange
MS-3367-12-9
A-33-175-9-
Natural
MS-3367-5-4
A-05-40-4-
Yellow
MS-3367-12-0
A-33-175-0-
UV Black
UV Black
MS-3367-5-5
A-05-40-5-
Green
MS-3367-13-9
A-36-175-9-
Natural
A-14-120-9-
Natural
MS-3367-5-6
A-05-40-6-
Blue
MS-3367-13-0
A-36-175-0-
UV Black
MS-3367-4-0
A-04-18-0-
UV Black
MS-3367-5-7
A-05-40-7-
Purple
MS-3367-16-9
A-48-175-9-
Natural
Yellow
MS-3367-4-9
A-04-18-9-
Natural
MS-3367-5-8
A-05-40-8-
Grey
MS-3367-16-8
A-48-175-8-
Grey
A-07-50-5-
Green
MS-3367-4-1
A-04-18-1
Brown
MS-3367-7-0
A-11-50-0-
UV Black
MS-3367-16-0
A-48-175-0-
UV Black
A-07-50-6-
Blue
MS-3367-4-2
A-04-18-2-
Red
MS-3367-7-9
A-11-50-9-
Natural
MS-3367-23-9
A-07-50-LP-9-
Natural
MS-3367-1-7
A-07-50-7-
Purple
MS-3367-4-3
A-04-18-3-
Orange
MS-3367-7-1
A-11-50-1
Brown
MS3367-23-0
A-07-50-LP-0-
UV Black
MS-3367-1-8
A-07-50-8-
Grey
MS-3367-4-4
A-04-18-4-
Yellow
MS-3367-7-2
A-11-50-2-
Red
MS3367-25-9-
A-14-120-LP-9-
Natural
MS-3367-2-0
A-14-50-0-
UV Black
MS-3367-4-5
A-04-18-5-
Green
MS-3367-7-3
A-11-50-3-
Orange
MS3367-25-0-
A-14-120-LP-0- UV Black
MS-3367-2-9
A-14-50-9-
Natural
MS-3367-4-6
A-04-18-6-
Blue
MS-3367-7-4
A-11-50-4-
Yellow
MS-3367-2-1
A-14-50-1-
Brown
MS-3367-4-7
A-04-18-7-
Purple
MS-3367-7-5
A-11-50-5-
Green
MS-3367-2-2
A-14-50-2-
Red
MS-3367-4-8
A-04-18-8-
Grey
MS-3367-7-6
A-11-50-6-
Blue
MS-3367-2-3
A-14-50-3-
Orange
MS-3367-5-0
A-05-40-0-
UV Black
MS-3367-7-7
A-11-50-7-
Purple
MS-3367-2-4
A-14-50-4-
Yellow
MS-3367-5-9
A-05-40-9-
Natural
MS-3367-7-8
A-11-50-8-
Grey
MS-3367-2-5
A-14-50-5-
Green
MS-3367-5-1
A-05-40-1
Brown
MS-3367-10-9
A-24-175-9-
Natural
MS-3367-2-6
A-14-50-6-
Blue
MS-3367-5-2
A-05-40-2-
Red
MS-3367-10-0
A-24-175-0-
UV Black
UL # E168851
CSA # 207196
Color
CAGE Code - 03RL1
Operating Characteristics Of ACTs Cable Ties

Cable
Tie
Material
Nylon
General
Purpose
Black Nylon
Heat
Stabilized
Black Nylon
UV
Stabilized
Temperature
Rating
1850F
850C
2570F
1250C
1850F
850C
UL
Flame
Rating
Environment
94V-2
Indoor
94V-2
Indoor
Indoor
94V-2
or
Outdoor
Regulatory Requirements
CSA 22.2
SAE AS23190
UL 1565
SAE AS33671
CSA 22.2
SAE AS23190
UL 1565
SAE AS33671
CSA 22.2
SAE AS23190
UL 1565
SAE AS33671
* Minimum Installation Temperature Is Greater Than 320F or 00C

DISCLAIMER OF WARRANTY AND LIABILITY
Although the information and recommendations set forth herein (information) are presented in good faith and believed to be correct
as of the date hereof, Advanced Cable Ties, Inc. makes no representations or warranties as to the completeness or accuracy thereof.
Information is supplied upon the condition that the persons receiving same will make their own determination as to its suitability for
their purposes prior to use. In no event will Advanced Cable Ties, Inc. be responsible for damages of any nature whatsoever resulting
from the use of or reliance upon information or the product to which information refers. Nothing contained herein is to be construed
as a recommendation to use any product, process, equipment or formulation in conflict with any patent, and Advanced Cable Ties, Inc.
makes no representation or warranty, expressed or implied, that the use thereof will not infringe upon any patent. No representations
or warranties, either expressed or implied, of merchantability, fitness for a particular purpose or of any other nature are made
hereunder with respect to information or the product to which information refers.

Cable Tie Material Characteristics

A cable tie is a band or length of strap, manufactured from a class of polymeric materials known as
polyamides (Nylon 6/6). The width, length and head area employ ratcheting mechanisms which
allow for locking as necessary for bundling items together.
Commercially introduced in October 1938, Nylon was the first synthetic semi-crystalline polymer
whose physical properties compared favorably to some metals. The polymers high strength and
temperature resistance allows it to be used in engineered applications thus it falls into a category of
polymers known as engineering thermoplastic. Nylons are produced from a family of resins, which
contain an amide group -CONH-. These materials are then polymerized; a chemical process that
link small amide monomers together into a long polymer chain, then called polyamides.
Nylon possesses an outstanding balance of properties, combining strength, moderate stiffness, high
service temperature and a high level of toughness. Particularly resistant to repeated impact, nylon
has a low coefficient of friction and excellent abrasion resistance. Nylon is resistant to fuels,
lubricants and most chemicals, but is attacked by phenols, strong acids and oxidizing agents (ref.
Our Physical and Chemical Certification for further information). Nylon is inherently susceptible to
environmental conditions. ACT cable ties are moisturized to attain optimum performance levels.
Nylon product should be stored in cool dry areas, out of direct sunlight and sealed in the original
packaging material. These measures will extend performance levels indefinitely.
General purpose nylon is suitable for use in most practical applications at continuous temperatures
up to 150 degrees Fahrenheit. Nylon 6/6, the grade most often used for cable tie production, meets
UL 94V-2 flammability ratings. Its working temperature range is from 40 degrees Fahrenheit to 185
degrees Fahrenheit.
Heat Stabilized Nylon 6/6 is used in continuous or extended exposure to high temperatures (up to
250 degrees Fahrenheit). A general-purpose nylon will have a reduction in physical properties and
fatigue as a result of high temperatures. Nylon cable ties containing specially formulated heat
stabilizers provide additional thermal endurance. Heat stabilized nylons are engineered for
continuous exposure to temperatures above 185 degrees Fahrenheit, which meet UL standards for
electrical applications.
UV Stabilized Nylon 6/6 is used in continuous or extended exposure to outdoor use. The nylon cable
tie is a weather resistant grade, enduring additional ultraviolet (UV) light. This grade is produced by
incorporating stabilizers in the nylon resin. UV Stabilized Nylon cable ties are available only in black.
For further assistance please contact Customer Service

Advanced Cable Ties, Inc. 245 Suffolk Lane Gardner, MA 01440
Tel: 800-861-7228 Fax: 978-630-3999
Email: [email protected]
Web: www.advancedcableties.com
03-01

Datasheet

Uploaded by

Copyright:

Available Formats

Datasheet

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Datasheet

Uploaded by

Copyright:

Available Formats

Welcome To Advanced Cable Ties, Inc.

Tel: 800-861-7228 - email: [email protected]

Reading ACT Part Numbers

Miniature (18 lb) Natural, UV Black & Heat Stabilized Black

* Tolerance: .xxx = +-.005, .xx = +-.015, Fraction = +-1/32

* 2 Week Delivery Time For Heat Stabilized Ties

Tel: 800-861-7228 - email: [email protected]

Intermediate (40 lb) Natural, UV Black & Heat Stabilized Black

* Tolerance: .xxx = +-.005, .xx = +-.015, Fraction = +-1/32

* 2 Week Delivery Time For Heat Stabilized Ties

Standard (50 lb) Natural, UV Black & Heat Stabilized Black

* Tolerance: .xxx = +-.005, .xx = +-.015, Fraction = +-1/32

* 2 Week Delivery Time For Heat Stabilized Ties

Tel: 800-861-7228 - email: [email protected]

100 AL-08-120-9-C Natural Nylon

100 AL-08-120-30-C Heat Stabilized Black

100 AL-14-120-30-C Heat Stabilized

* Tolerance: .xxx = +-.005, .xx = +-.015, Fraction = +-1/32

* 2 Week Delivery Time For Heat Stabilized Ties

Extra Heavy Duty (175 lb) Natural, UV Black & Gray

* Tolerance: .xxx = +-.005, .xx = +-.015, Fraction = +-1/32

250 lb Series Natural & UV Black

Tel: 800-861-7228 - email: [email protected]

*Military Specifications Do Not Apply To Fluorescent Colors

4 (18 lb) Color & Fluorescent

* Tolerance: .xxx = +-.005, .xx = +-.015, Fraction = +-1/32

* 2 Week Delivery Time For Color Ties

5 (40 lb) Color & Fluorescent

* Tolerance: .xxx = +-.005, .xx = +-.015, Fraction = +-1/32

* 2 Week Delivery Time For Color Ties

Tel: 800-861-7228 - email: [email protected]

8 (40 lb) Color & Fluorescent

* Tolerance: .xxx = +-.005, .xx = +-.015, Fraction = +-1/32

* 2 Week Delivery Time For Color Ties

7 (50 lb) Color & Fluorescent

* Tolerance: .xxx = +-.005, .xx = +-.015, Fraction = +-1/32

* 2 Week Delivery Time For Color Ties

11 (50 lb) Color & Fluorescent

* Tolerance: .xxx = +-.005, .xx = +-.015, Fraction = +-1/32

* 2 Week Delivery Time For Color Ties

14 (50 lb) Color & Fluorescent

* Tolerance: .xxx = +-.005, .xx = +-.015, Fraction = +-1/32

* 2 Week Delivery Time For Color Ties

Tel: 800-861-7228 - email: [email protected]

Clam Shell Dimensions:

Cable Tie Pcs Per

Tension Tool ACTPAC

Cable Tie Pcs Per

Tel: 800-861-7228 - email: [email protected]

Yellow & Red Wire Connector ACTPAC

Cable Tie Pcs Per

Blue Wire Connector ACTPAC

Clam Shell Dimensions:

Cable Tie Pcs Per

3/4 Mounting Pad ACTPAC

Cable Tie Pcs Per

1 Mounting Pad ACTPAC

Cable Tie Pcs Per

Tel: 800-861-7228 - email: [email protected]

* Tolerance: .xxx = +-.005, .xx = +-.015, Fraction = +-1/32