#!

/usr/bin/perl -w # # Nagios plugin to monitor vmware esx servers # # License: GPL # Copyright (c) 2008 op5 AB # Author: Kostyantyn Gushchyn <[email protected]> # Contributor(s): Patrick Mller, Jeremy Martin, Eric Jonsson, stumpr, John Cavanau gh, Libor Klepac, maikmayers # # For direct contact with any of the op5 developers send a mail to # [email protected] # Discussions are directed to the mailing list [email protected], # see http://lists.op5.com/mailman/listinfo/op5-users # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2 as # published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # use strict; use warnings; use vars qw($PROGNAME $VERSION $output $values $result); use Nagios::Plugin; use File::Basename; my $perl_module_instructions=" Download the latest version of Perl Toolkit from VMware support page. In this example we use VMware-vSphere-SDK-for-Perl-4.0.0-161974.x86_64.tar.gz, but the instructions should apply to newer versions as well. Upload the file to your op5 Monitor server's /root dir and execute: cd /root tar xvzf VMware-vSphere-SDK-for-Perl-4.0.0-161974.x86_64.tar.gz cd vmware-vsphere-cli-distrib/ ./vmware-install.pl Follow the on screen instructions, described below: \"Creating a new vSphere CLI installer database using the tar4 format. Installing vSphere CLI. Installing version 161974 of vSphere CLI You must read and accept the vSphere CLI End User License Agreement to continue. Press enter to display it.\" <ENTER> \"Read through the License Agreement\"

\"Do you accept? (yes/no) yes \"The following Perl modules were found on the system but may be too old to wo rk with VIPerl: Crypt::SSLeay Compress::Zlib\" \"In which directory do you want to install the executable files? [/usr/bin]\" <ENTER> \"Please wait while copying vSphere CLI files... The installation of vSphere CLI 4.0.0 build-161974 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: \"/usr/bin/vmware-uninstall-vSphere-CLI.pl\". This installer has successfully installed both vSphere CLI and the vSphere SDK for Perl. Enjoy, --the VMware team\" Note: \"Crypt::SSLeay\" and \"Compress::Zlib\" are not needed for check_esx3 to work. "; eval { require VMware::VIRuntime } or Nagios::Plugin::Functions::nagios_exit('UNKNOWN', "Missing perl module VMwa re::VIRuntime. Download and install \'VMware Infrastructure (VI) Perl Toolkit\', available at http://www.vmware.com/download/sdk/\n $perl_module_instructions"); $PROGNAME = basename($0); $VERSION = '0.2.0'; my $np = Nagios::Plugin->new( usage => "Usage: %s -D <data_center> -H <host_name> [ -N <vm_name> ]\n" . " -u <user> -p <pass> -f <authfile>\n" . " -l <command> [ -s <subcommand> ]\n" . " [ -x <black list> ]\n" . " [ -t <timeout> ] [ -w <warn_range> ] [ -c <crit_range> ]\n" . ' [ -V ] [ -h ]', version => $VERSION, plugin => $PROGNAME, shortname => uc($PROGNAME), blurb => 'VMWare Infrastructure plugin', extra => "Supported commands(^ means blank or not specified parameter) :\n" . " Common options for VM, Host and DC :\n" . " * cpu - shows cpu info\n" . " + usage - CPU usage in percentage\n" . " + usagemhz - CPU usage in MHz\n" . " ^ all cpu info\n"

. . . . . . . . . \n"

" " " " " " " " "

* mem + + + + + ^ * net +

- shows mem info\n" usage - mem usage in percentage\n" usagemb - mem usage in MB\n" swap - swap mem usage in MB\n" overhead - additional mem used by VM Server in MB\n" overall - overall mem used by VM Server in MB\n" all mem info\n" - shows net info\n" usage - overall network usage in KBps(Kilobytes per Second)

. " + receive - receive in KBps(Kilobytes per Second) \n" . " + send - send in KBps(Kilobytes per Second) \n" . " ^ all net info\n" . " * io - shows disk io info\n" . " + read - read latency in ms\n" . " + write - write latency in ms\n" . " ^ all disk io info\n" . " * runtime - shows runtime info\n" . " + status - overall host status (gray/green/red/yellow)\n" . " + issues - all issues for the host\n" . " ^ all runtime info\n" . " VM specific :\n" . " * cpu - shows cpu info\n" . " + wait - CPU wait in ms\n" . " * mem - shows mem info\n" . " + swapin - swapin mem usage in MB\n" . " + swapout - swapout mem usage in MB\n" . " + active - active mem usage in MB\n" . " * io - shows disk I/O info\n" . " + usage - overall disk usage in MB/s\n" . " * runtime - shows runtime info\n" . " + con - connection state\n" . " + cpu - allocated CPU in MHz\n" . " + mem - allocated mem in MB\n" . " + state - virtual machine state (UP, DOWN, SUSPENDED)\n" . " + consoleconnections - console connections to VM\n" . " + guest - guest OS status, needs VMware Tools\n" . " + tools - VMWare Tools status\n" . " Host specific :\n" . " * net - shows net info\n" . " + nic - makes sure all active NICs are plugged in\n" . " * io - shows disk io info\n" . " + aborted - aborted commands count\n" . " + resets - bus resets count\n" . " + kernel - kernel latency in ms\n" . " + device - device latency in ms\n" . " + queue - queue latency in ms\n" . " * vmfs - shows Datastore info\n" . " + (name) - info for datastore with name (name)\n" . " ^ all datastore info\n" . " * runtime - shows runtime info\n" . " + con - connection state\n" . " + health - checks cpu/storage/memory/sensor status\n" . " + maintenance - shows whether host is in maintenance mode\n" . " + list(vm) - list of VMWare machines and their statuses\n" . " * service - shows Host service info\n" . " + (names) - check the state of one or several services specif ied by (names), syntax for (names):<service1>,<service2>,...,<serviceN>\n" . " ^ show all services\n" . " DC specific :\n"

. " * io - shows disk io info\n" . " + aborted - aborted commands count\n" . " + resets - bus resets count\n" . " + kernel - kernel latency in ms\n" . " + device - device latency in ms\n" . " + queue - queue latency in ms\n" . " * vmfs - shows Datastore info\n" . " + (name) - info for datastore with name (name)\n" . " ^ all datastore info\n" . " * runtime - shows runtime info\n" . " + list(vm) - list of VMWare machines and their statuses\n" . " + listhost - list of VMWare esx host servers and their status es\n" . " * recommendations - shows recommendations for cluster\n" . " + (name) - recommendations for cluster with name (name)\n" . " ^ all clusters recommendations\n" . "\n\nCopyright (c) 2008 op5", timeout => 30, ); $np->add_arg( spec => 'host H=s', help => "-H, --host=<hostname>\n" . ' ESX or ESXi hostname.', required => 0, ); $np->add_arg( spec => 'datacenter D=s', help => "-D, --datacenter=<DCname>\n" . ' Datacenter hostname.', required => 0, ); $np->add_arg( spec => 'name N=s', help => "-N, --name=<vmname>\n" . ' Virtual machine name.', required => 0, ); $np->add_arg( spec => 'username u=s', help => "-u, --username=<username>\n" . ' Username to connect with.', required => 0, ); $np->add_arg( spec => 'password p=s', help => "-p, --password=<password>\n" . ' Password to use with the username.', required => 0, ); $np->add_arg( spec => 'authfile f=s', help => "-f, --authfile=<path>\n" . " Authentication file with login and password. File syntax :\n" . " username=<login>\n"

. ' password=<password>', required => 0, ); $np->add_arg( spec => 'warning w=s', help => "-w, --warning=THRESHOLD\n" . " Warning threshold. See\n" . " http://nagiosplug.sourceforge.net/developer-guidelines.html#THRESHOLDF ORMAT\n" . ' for the threshold format.', required => 0, ); $np->add_arg( spec => 'critical c=s', help => "-c, --critical=THRESHOLD\n" . " Critical threshold. See\n" . " http://nagiosplug.sourceforge.net/developer-guidelines.html#THRESHOLDF ORMAT\n" . ' for the threshold format.', required => 0, ); $np->add_arg( spec => 'command l=s', help => "-l, --command=COMMAND\n" . ' Specify command type (CPU, MEM, NET, IO, VMFS, RUNTIME, ...)', required => 1, ); $np->add_arg( spec => 'subcommand s=s', help => "-s, --subcommand=SUBCOMMAND\n" . ' Specify subcommand', required => 0, ); $np->add_arg( spec => 'sessionfile S=s', help => "-S, --sessionfile=SESSIONFILE\n" . ' Specify a filename to store sessions for faster authentication', required => 0, ); $np->add_arg( spec => 'exclude x=s', help => "-x, --exclude=<black list>\n" . ' Specify black list', required => 0, ); $np->getopts; my my my my my my $host = $np->opts->host; $datacenter = $np->opts->datacenter; $vmname = $np->opts->name; $username = $np->opts->username; $password = $np->opts->password; $authfile = $np->opts->authfile;

my $warning = $np->opts->warning; my $critical = $np->opts->critical; my $command = $np->opts->command; my $subcommand = $np->opts->subcommand; my $sessionfile = $np->opts->sessionfile; my $blacklist = $np->opts->exclude; my $percw; my $percc; $output = "Unknown ERROR!"; $result = 'CRITICAL'; if (defined($subcommand)) { $subcommand = undef if ($subcommand eq ''); } if (defined($critical)) { ($percc, $critical) = check_percantage($critical); $critical = undef if ($critical eq ''); } if (defined($warning)) { ($percw, $warning) = check_percantage($warning); $warning = undef if ($warning eq ''); } $np->set_thresholds(critical => $critical, warning => $warning); eval { die "Provide either Password/Username or Auth file\n" if ((!defined($pas sword) !defined($username) defined($authfile)) && (defined($password) d efined($username) !defined($authfile))); die "Both threshold values must be the same units\n" if (($percw && !$pe rcc && defined($critical)) (!$percw && $percc && defined($warning))); if (defined($authfile)) { open (AUTH_FILE, $authfile) die "Unable to open auth file \"$ authfile\"\n"; while( <AUTH_FILE> ) { if(s/^[ \t]*username[ \t]*=//){ s/^\s+//;s/\s+$//; $username = $_; } if(s/^[ \t]*password[ \t]*=//){ s/^\s+//;s/\s+$//; $password = $_; } } die "Auth file must contain both username and password\n" if (!( defined($username) && defined($password))); } if (defined($datacenter)) { if (defined($sessionfile) and -e $sessionfile) { Vim::load_session(service_url => $datacenter, session_fi

le => $sessionfile); } Util::connect("https://" . $datacenter . "/sdk/webService", $use rname, $password); } elsif (defined($host)) { if (defined($sessionfile) and -e $sessionfile) { Vim::load_session(service_url => $host, session_file => $sessionfile); } Util::connect("https://" . $host . "/sdk/webService", $username, $password); } else { $np->nagios_exit('CRITICAL', "No Host or Datacenter specified"); } if (defined($sessionfile)) { Vim::save_session(session_file=>$sessionfile); } if (defined($vmname)) { if (uc($command) eq "CPU") { ($result, $output) = vm_cpu_info($vmname, $np, $subcomma nd); } elsif (uc($command) eq "MEM") { ($result, $output) = vm_mem_info($vmname, $np, $subcomma nd); } elsif (uc($command) eq "NET") { ($result, $output) = vm_net_info($vmname, $np, $subcomma nd); } elsif (uc($command) eq "IO") { ($result, $output) = vm_disk_io_info($vmname, $np, $subc ommand); } elsif (uc($command) eq "RUNTIME") { ($result, $output) = vm_runtime_info($vmname, $np, $subc ommand); } else { $output = "Unknown HOST-VM command\n" . $np->opts->_help ; $result = 'CRITICAL'; } } elsif (defined($host)) {

my $esx; $esx = {name => $host} if (defined($datacenter)); if (uc($command) eq "CPU") { ($result, $output) = host_cpu_info($esx, $np, $subcomman d); } elsif (uc($command) eq "MEM") { ($result, $output) = host_mem_info($esx, $np, $subcomman d); } elsif (uc($command) eq "NET") { ($result, $output) = host_net_info($esx, $np, $subcomman d); } elsif (uc($command) eq "IO") { ($result, $output) = host_disk_io_info($esx, $np, $subco mmand); } elsif (uc($command) eq "VMFS") { ($result, $output) = host_list_vm_volumes_info($esx, $np , $subcommand, $blacklist, $percc $percw); } elsif (uc($command) eq "RUNTIME") { ($result, $output) = host_runtime_info($esx, $np, $subco mmand); } elsif (uc($command) eq "SERVICE") { ($result, $output) = host_service_info($esx, $np, $subco mmand); } else { $output = "Unknown HOST command\n" . $np->opts->_help; $result = 'CRITICAL'; } } else { if (uc($command) eq "RECOMMENDATIONS") { my $cluster_name; $cluster_name = {name => $subcommand} if (defined($subco mmand)); ($result, $output) = return_cluster_DRS_recommendations( $np, $cluster_name); } elsif (uc($command) eq "CPU") { ($result, $output) = dc_cpu_info($np, $subcommand); } elsif (uc($command) eq "MEM") { ($result, $output) = dc_mem_info($np, $subcommand);

} elsif (uc($command) eq "NET") { ($result, $output) = dc_net_info($np, $subcommand); } elsif (uc($command) eq "IO") { ($result, $output) = dc_disk_io_info($np, $subcommand); } elsif (uc($command) eq "VMFS") { ($result, $output) = dc_list_vm_volumes_info($np, $subco mmand, $blacklist, $percc $percw); } elsif (uc($command) eq "RUNTIME") { ($result, $output) = dc_runtime_info($np, $subcommand); } else { $output = "Unknown HOST command\n" . $np->opts->_help; $result = 'CRITICAL'; } } }; if ($@) { $output = $@; $result = 'CRITICAL'; } Util::disconnect(); $np->nagios_exit($result, $output); ################################################################################ ################################################################################ ####### sub get_key_metrices { my ($perfmgr_view, $group, @names) = @_; my $perfCounterInfo = $perfmgr_view->perfCounter; my @counters; foreach (@$perfCounterInfo) { if ($_->groupInfo->key eq $group) { my $cur_name = $_->nameInfo->key . "." . $_->rollupType>val; foreach my $index (0..@names-1) { if ($names[$index] =~ /$cur_name/) { $names[$index] =~ /(\w+).(\w+):*(.*)/; $counters[$index] = PerfMetricId->new(co unterId => $_->key, instance => $3); } } } }

return \@counters; } sub generic_performance_values { my ($views, $group, @list) = @_; my $counter = 0; my @values = (); eval { my $perfMgr = Vim::get_view(mo_ref => Vim::get_service_content() ->perfManager, properties => [ 'perfCounter' ]); my $metrices = get_key_metrices($perfMgr, $group, @list); my @perf_query_spec = (); push(@perf_query_spec, PerfQuerySpec->new(entity => $_, metricId => $metrices, format => 'csv', intervalId => 20, maxSample => 1)) foreach (@$vi ews); my $perf_data = $perfMgr->QueryPerf(querySpec => \@perf_query_sp ec); while (@$perf_data) { my $unsorted = shift(@$perf_data)->value; my @host_values = (); foreach my $id (@$unsorted) { foreach my $index (0..@$metrices-1) { if ($id->id->counterId == $$metrices[$in dex]->counterId) { $counter++ if (!defined($host_va lues[$index])); $host_values[$index] = $id; } } } push(@values, \@host_values); } }; return undef if ($@ return \@values; } sub return_host_performance_values { my $values; my $host_name = shift(@_); my $host_view = Vim::find_entity_views(view_type => 'HostSystem', filter => $host_name, properties => [ 'name' ]); # Added properties named argument. die "Runtime error\n" if (!defined($host_view)); die "Host \"" . $$host_name{"name"} . "\" does not exist\n" if (!@$host_ view); $values = generic_performance_values($host_view, @_); return undef if ($@); return $values; } $counter != (@list * @$views));

sub return_host_vmware_performance_values { my $values; my $vmname = shift(@_); my $vm_view = Vim::find_entity_views(view_type => 'VirtualMachine', filt er => {name => $vmname}, properties => [ 'name', 'runtime' ]); die "Runtime error\n" if (!defined($vm_view)); die "VMware machine \"" . $vmname . "\" does not exist\n" if (!@$vm_view ); die "VMware machine \"" . $vmname . "\" is not running. Current state is \"" . $$vm_view[0]->runtime->powerState->val . "\"\n" if ($$vm_view[0]->runtime ->powerState->val ne "poweredOn"); $values = generic_performance_values($vm_view, @_); return $@ if ($@); return $values; } sub return_dc_performance_values { my $values; my $host_views = Vim::find_entity_views(view_type => 'HostSystem', prope rties => [ 'name' ]); die "Runtime error\n" if (!defined($host_views)); die "Datacenter does not contain any hosts\n" if (!@$host_views); $values = generic_performance_values($host_views, @_); return undef if ($@); return $values; } sub simplify_number { my ($number, $cnt) = @_; $cnt = 2 if (!defined($cnt)); return sprintf("%.${cnt}f", "$number"); } sub convert_number { my ($number) = shift(@_); $number =~ s/\,/\./; return $number; } sub check_percantage { my ($number) = shift(@_); my $perc = $number =~ s/\%//; return ($perc, $number); } sub check_health_state { my ($state) = shift(@_); my $res = 'CRITICAL'; if (uc($state) eq "GREEN") { $res = 'OK' } elsif (uc($state) eq "YELLOW") { $res = 'WARNING'; }

return $res; } #===================================================================== HOST == ==========================================================================# sub host_cpu_info { my ($host, $np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'HOST CPU Unknown error'; if (defined($subcommand)) { if (uc($subcommand) eq "USAGE") { $values = return_host_performance_values($host, 'cpu', ( 'usage.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) * 0.01); $np->add_perfdata(label => "cpu_usage", value => $value, uom => '%', threshold => $np->threshold); $output = "cpu usage=" . $value . " %"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "USAGEMHZ") { $values = return_host_performance_values($host, 'cpu', ( 'usagemhz.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value)); $np->add_perfdata(label => "cpu_usagemhz", value => $value, uom => 'Mhz', threshold => $np->threshold); $output = "cpu usagemhz=" . $value . " MHz"; $res = $np->check_threshold(check => $value); } } else { $res = 'CRITICAL'; $output = "HOST CPU - unknown subcommand\n" . $np->opts>_help; } } else { $values = return_host_performance_values($host, 'cpu', ('usagemh z.average', 'usage.average')); if (defined($values)) { my $value1 = simplify_number(convert_number($$values[0][ 0]->value)); my $value2 = simplify_number(convert_number($$values[0][

1]->value) * 0.01); $np->add_perfdata(label => "cpu_usagemhz", value => $val ue1, uom => 'Mhz', threshold => $np->threshold); $np->add_perfdata(label => "cpu_usage", value => $value2 , uom => '%', threshold => $np->threshold); $res = 'OK'; $output = "cpu usage=" . $value1 . " MHz (" . $value2 . "%)"; } } return ($res, $output); } sub host_mem_info { my ($host, $np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'HOST MEM Unknown error'; if (defined($subcommand)) { if (uc($subcommand) eq "USAGE") { $values = return_host_performance_values($host, 'mem', ( 'usage.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) * 0.01); $np->add_perfdata(label => "mem_usage", value => $value, uom => '%', threshold => $np->threshold); $output = "mem usage=" . $value . " %"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "USAGEMB") { $values = return_host_performance_values($host, 'mem', ( 'consumed.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) / 1024); $np->add_perfdata(label => "mem_usagemb", value => $value, uom => 'MB', threshold => $np->threshold); $output = "mem usage=" . $value . " MB"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "SWAP") { $values = return_host_performance_values($host, 'mem', ( 'swapused.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) / 1024); $np->add_perfdata(label => "mem_swap", value =>

$value, uom => 'MB', threshold => $np->threshold); $output = "swap usage=" . $value . " MB"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "OVERHEAD") { $values = return_host_performance_values($host, 'mem', ( 'overhead.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) / 1024); $np->add_perfdata(label => "mem_overhead", value => $value, uom => 'MB', threshold => $np->threshold); $output = "overhead=" . $value . " MB"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "OVERALL") { $values = return_host_performance_values($host, 'mem', ( 'consumed.average', 'overhead.average')); if (defined($values)) { my $value = simplify_number((convert_number($$va lues[0][0]->value) + convert_number($$values[1]->value)) / 1024); $np->add_perfdata(label => "mem_overhead", value => $value, uom => 'MB', threshold => $np->threshold); $output = "overall=" . $value . " MB"; $res = $np->check_threshold(check => $value); } } else { $res = 'CRITICAL'; $output = "HOST MEM - unknown subcommand\n" . $np->opts>_help; } } else { $values = return_host_performance_values($host, 'mem', ('consume d.average', 'usage.average', 'overhead.average', 'swapused.average')); if (defined($values)) { my $value1 = simplify_number(convert_number($$values[0][ 0]->value) / 1024); my $value2 = simplify_number(convert_number($$values[0][ 1]->value) * 0.01); my $value3 = simplify_number(convert_number($$values[0][ 2]->value) / 1024); my $value4 = simplify_number(convert_number($$values[0][ 3]->value) / 1024); $np->add_perfdata(label => "mem_usagemb", value => $valu e1, uom => 'MB', threshold => $np->threshold); $np->add_perfdata(label => "mem_usage", value => $value2 , uom => '%', threshold => $np->threshold); $np->add_perfdata(label => "mem_overhead", value => $val ue3, uom => 'MB', threshold => $np->threshold);

$np->add_perfdata(label => "mem_swap", value => $value4, uom => 'MB', threshold => $np->threshold); $res = 'OK'; $output = "mem usage=" . $value1 . " MB (" . $value2 . " %), overhead=" . $value3 . " MB, swapped=" . $value4 . " MB"; } } return ($res, $output); } sub host_net_info { my ($host, $np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'HOST NET Unknown error'; if (defined($subcommand)) { if (uc($subcommand) eq "USAGE") { $values = return_host_performance_values($host, 'net', ( 'usage.average:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value)); $np->add_perfdata(label => "net_usage", value => $value, uom => 'KBps', threshold => $np->threshold); $output = "net usage=" . $value . " KBps"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "RECEIVE") { $values = return_host_performance_values($host, 'net', ( 'received.average:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value)); $np->add_perfdata(label => "net_receive", value => $value, uom => 'KBps', threshold => $np->threshold); $output = "net receive=" . $value . " KBps"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "SEND") { $values = return_host_performance_values($host, 'net', ( 'transmitted.average:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value)); $np->add_perfdata(label => "net_send", value => $value, uom => 'KBps', threshold => $np->threshold); $output = "net send=" . $value . " KBps"; $res = $np->check_threshold(check => $value);

} } elsif (uc($subcommand) eq "NIC") { my $host_view = Vim::find_entity_view(view_type => 'Host System', filter => $host); die "Host \"" . $$host{"name"} . "\" does not exist\n" i f (!defined($host_view)); $host_view->update_view_data(); my $network_config = $host_view->config->network; die "Host \"" . $$host{"name"} . "\" has no network info in the API.\n" if (!defined($network_config)); $output = ""; $res = "OK"; my $OKCount = 0; my $BadCount = 0; # create a hash of NIC info to facilitate easy lookups my %NIC = (); foreach (@{$network_config->pnic}) { $NIC{$_->key} = $_; } # see which NICs are actively part of a vswitch foreach (@{$network_config->vswitch}) { # get list of physical nics if (defined($_->pnic)){ foreach (@{$_->pnic}) { my $nic_key = $_; my $nic_name = $NIC{$nic_key}->d evice; if (!defined($NIC{$nic_key}->lin kSpeed)) { $output .= ", " if ($out put); $output .= "$nic_name is unplugged"; $res = "CRITICAL"; $BadCount++; } else { $OKCount++; } } } } if (!$output) { $output = "All $OKCount NICs are connected"; } else { $output = $BadCount ."/" . ($BadCount + $OKCount

) . " NICs are disconncted: " . $output; } $np->add_perfdata(label => "OK_NICs", value => $OKCount) ; $np->add_perfdata(label => "Bad_NICs", value => $BadCoun t); } else { $res = 'CRITICAL'; $output = "HOST NET - unknown subcommand\n" . $np->opts>_help; } } else { $values = return_host_performance_values($host, 'net', ('receive d.average:*', 'transmitted.average:*')); $output = ''; if (defined($values)) { my $value1 = simplify_number(convert_number($$values[0][ 0]->value)); my $value2 = simplify_number(convert_number($$values[0][ 1]->value)); $np->add_perfdata(label => "net_receive", value => $valu e1, uom => 'KBps', threshold => $np->threshold); $np->add_perfdata(label => "net_send", value => $value2, uom => 'KBps', threshold => $np->threshold); $res = 'OK'; $output = "net receive=" . $value1 . " KBps, send=" . $v alue2 . " KBps, "; } my $host_view = Vim::find_entity_view(view_type => 'HostSystem', filter => $host); if (defined($host_view)) { $host_view->update_view_data(); my $network_config = $host_view->config->network; if (defined($network_config)) { my $OKCount = 0; my $BadCount = 0; # create a hash of NIC info to facilitate easy l ookups my %NIC = (); foreach (@{$network_config->pnic}) { $NIC{$_->key} = $_; } # see which NICs are actively part of a vswitch foreach (@{$network_config->vswitch}) { # get list of physical nics if (defined($_->pnic)){ foreach (@{$_->pnic}) {

if (!defined($NIC{$_}->l inkSpeed)) { $BadCount++; } else { $OKCount++; } } } } if (!$BadCount) { $output .= "all $OKCount NICs are connec ted"; } else { $output .= $BadCount ."/" . ($BadCount + $OKCount) . " NICs are disconncted"; } $np->add_perfdata(label => "OK_NICs", value => $ OKCount); $np->add_perfdata(label => "Bad_NICs", value => $BadCount); } } } return ($res, $output); } sub host_disk_io_info { my ($host, $np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'HOST IO Unknown error'; if (defined($subcommand)) { if (uc($subcommand) eq "ABORTED") { $values = return_host_performance_values($host, 'disk', ('commandsAborted.summation:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value), 0); $np->add_perfdata(label => "io_aborted", value = > $value, threshold => $np->threshold); $output = "io commands aborted=" . $value; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "RESETS") { $values = return_host_performance_values($host, 'disk',

('busResets.summation:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value), 0); $np->add_perfdata(label => "io_busresets", value => $value, threshold => $np->threshold); $output = "io bus resets=" . $value; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "READ") { $values = return_host_performance_values($host, 'disk', ('totalReadLatency.average:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value), 0); $np->add_perfdata(label => "io_read", value => $ value, uom => 'ms', threshold => $np->threshold); $output = "io read latency=" . $value . " ms"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "WRITE") { $values = return_host_performance_values($host, 'disk', ('totalWriteLatency.average:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value), 0); $np->add_perfdata(label => "io_write", value => $value, uom => 'ms', threshold => $np->threshold); $output = "io write latency=" . $value . " ms"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "KERNEL") { $values = return_host_performance_values($host, 'disk', ('kernelLatency.average:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value), 0); $np->add_perfdata(label => "io_kernel", value => $value, uom => 'ms', threshold => $np->threshold); $output = "io kernel latency=" . $value . " ms"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "DEVICE") { $values = return_host_performance_values($host, 'disk', ('deviceLatency.average:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val

ues[0][0]->value), 0); $np->add_perfdata(label => "io_device", value => $value, uom => 'ms', threshold => $np->threshold); $output = "io device latency=" . $value . " ms"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "QUEUE") { $values = return_host_performance_values($host, 'disk', ('queueLatency.average:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value), 0); $np->add_perfdata(label => "io_queue", value => $value, uom => 'ms', threshold => $np->threshold); $output = "io queue latency=" . $value . " ms"; $res = $np->check_threshold(check => $value); } } else { $res = 'CRITICAL'; $output = "HOST IO - unknown subcommand\n" . $np->opts-> _help; } } else { $values = return_host_performance_values($host, 'disk', ('comman dsAborted.summation:*', 'busResets.summation:*', 'totalReadLatency.average:*', ' totalWriteLatency.average:*', 'kernelLatency.average:*', 'deviceLatency.average: *', 'queueLatency.average:*')); if (defined($values)) { my $value1 = simplify_number(convert_number($$values[0][ 0]->value), 0); my $value2 = simplify_number(convert_number($$values[0][ 1]->value), 0); my $value3 = simplify_number(convert_number($$values[0][ 2]->value), 0); my $value4 = simplify_number(convert_number($$values[0][ 3]->value), 0); my $value5 = simplify_number(convert_number($$values[0][ 4]->value), 0); my $value6 = simplify_number(convert_number($$values[0][ 5]->value), 0); my $value7 = simplify_number(convert_number($$values[0][ 6]->value), 0); $np->add_perfdata(label => "io_aborted", value => $value 1, threshold => $np->threshold); $np->add_perfdata(label => "io_busresets", value => $val ue2, threshold => $np->threshold); $np->add_perfdata(label => "io_read", value => $value3, uom => 'ms', threshold => $np->threshold); $np->add_perfdata(label => "io_write", value => $value4, uom => 'ms', threshold => $np->threshold); $np->add_perfdata(label => "io_kernel", value => $value5 , uom => 'ms', threshold => $np->threshold);

$np->add_perfdata(label => "io_device", value => $value6 , uom => 'ms', threshold => $np->threshold); $np->add_perfdata(label => "io_queue", value => $value7, uom => 'ms', threshold => $np->threshold); $res = 'OK'; $output = "io commands aborted=" . $value1 . ", io bus r esets=" . $value2 . ", io read latency=" . $value3 . " ms, write latency=" . $va lue4 . " ms, kernel latency=" . $value5 . " ms, device latency=" . $value6 . " m s, queue latency=" . $value7 ." ms"; } } return ($res, $output); } sub host_list_vm_volumes_info { my ($host, $np, $subcommand, $blacklist, $perc) = @_; my $res = 'CRITICAL'; my $output = 'HOST VM VOLUMES Unknown error'; if (defined($subcommand)) { $output = "No volume named \"$subcommand\" found"; my $host_view = Vim::find_entity_view(view_type => 'HostSystem', filter => $host, properties => ['name', 'datastore']); die "Host \"" . $$host{"name"} . "\" does not exist\n" if (!defi ned($host_view)); foreach my $ref_store (@{$host_view->datastore}) { my $store = Vim::get_view(mo_ref => $ref_store, properti es => ['summary', 'info']); if ($store->summary->name eq $subcommand) { $res = 'OK'; my $value1 = simplify_number(convert_number($sto re->summary->freeSpace) / 1024 / 1024); my $value2 = simplify_number(convert_number($sto re->info->freeSpace) / convert_number($store->summary->capacity) * 100); if ($perc) { $res = $np->check_threshold(check => $va lue2); } else { $res = $np->check_threshold(check => $va lue1); } $np->add_perfdata(label => $store->summary->name , value => $perc?$value2:$value1, uom => $perc?'%':'MB', threshold => $np->thres hold); $output = $store->summary->name . "=". $value1 . " MB (" . $value2 . "%)"; } } } else

{ $res = OK; $output = ''; my $host_view = Vim::find_entity_view(view_type => 'HostSystem', filter => $host, properties => ['name', 'datastore']); die "Host \"" . $$host{"name"} . "\" does not exist\n" if (!defi ned($host_view)); foreach my $ref_store (@{$host_view->datastore}) { my $store = Vim::get_view(mo_ref => $ref_store, properti es => ['summary', 'info']); if (defined($blacklist)) { my $name = $store->summary->name; next if ($blacklist =~ m/(^ \s \t ,)\Q$n ame\E($ \s \t ,)/); } my $value1 = simplify_number(convert_number($store->summ ary->freeSpace) / 1024 / 1024); my $value2 = simplify_number(convert_number($store->info ->freeSpace) / convert_number($store->summary->capacity) * 100); if ($perc) { $res = Nagios::Plugin::Functions::max_state($res , $np->check_threshold(check => $value2)); } else { $res = Nagios::Plugin::Functions::max_state($res , $np->check_threshold(check => $value1)); } $np->add_perfdata(label => $store->summary->name, value => $perc?$value2:$value1, uom => $perc?'%':'MB', threshold => $np->threshold); $output .= $store->summary->name . "=". $value1 . " MB ( " . $value2 . "%), "; } chop($output); chop($output); $output = "storages : " . $output; } return ($res, $output); } sub host_runtime_info { my ($host, $np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'HOST RUNTIME Unknown error'; my $runtime; my $host_view = Vim::find_entity_view(view_type => 'HostSystem', filter => $host, properties => ['name', 'runtime', 'overallStatus', 'configIssue']); die "Host \"" . $$host{"name"} . "\" does not exist\n" if (!defined($hos t_view));

$host_view->update_view_data(); $runtime = $host_view->runtime; if (defined($subcommand)) { if (uc($subcommand) eq "CON") { $output = "connection state=" . $runtime->connectionSta te->val; $res = 'OK' if ($runtime->connectionState->val eq "conne cted"); } elsif (uc($subcommand) eq "HEALTH") { my $OKCount = 0; my $AlertCount = 0; my $cpuStatusInfo = $runtime->healthSystemRuntime->hardw areStatusInfo->cpuStatusInfo; my $storageStatusInfo = $runtime->healthSystemRuntime->h ardwareStatusInfo->storageStatusInfo; my $memoryStatusInfo = $runtime->healthSystemRuntime->ha rdwareStatusInfo->memoryStatusInfo; my $numericSensorInfo = $runtime->healthSystemRuntime->s ystemHealthInfo->numericSensorInfo; if (!defined($cpuStatusInfo)) { $res = 'CRITICAL'; $output = "API error - unable to get cpuStatusIn fo\n"; } elsif (!defined($storageStatusInfo)) { $res = 'CRITICAL'; $output = "API error - unable to get storageStat usInfo\n"; } elsif (!defined($memoryStatusInfo)) { $res = 'CRITICAL'; $output = "API error - unable to get memoryStatu sInfo\n"; } elsif (!defined($numericSensorInfo)) { $res = 'CRITICAL'; $output = "API error - unable to get numericSens orInfo\n"; } else { $output = ''; foreach (@$cpuStatusInfo) { # print "CPU Name = ". $_->name .", Labe l = ". $_->status->label . ", Summary = ". $_->status->summary . ", Key = ". $_>status->key . "\n"; if (check_health_state($_->status->key) ne 'OK')

{ $output .= ", " if ($output); $output .= $_->name . ": " . $_>status->summary; $AlertCount++; } else { $OKCount++; } } foreach (@$storageStatusInfo) { # print "Storage Name = ". $_->name .", Label = ". $_->status->label . ", Summary = ". $_->status->summary . ", Key = ". $_->status->key . "\n"; if (check_health_state($_->status->key) ne 'OK') { $output .= ", " if ($output); $output .= "Storage " . $_->name . ": " . $_->status->summary; $AlertCount++; } else { $OKCount++; } } foreach (@$memoryStatusInfo) { # print "Memory Name = ". $_->name .", L abel = ". $_->status->label . ", Summary = ". $_->status->summary . ", Key = ". $_->status->key . "\n"; if (check_health_state($_->status->key) ne 'OK') { $output .= ", " if ($output); $output .= "Memory: " . $_->stat us->summary; $AlertCount++; } else { $OKCount++; } } foreach (@$numericSensorInfo) { # print "Sensor Name = ". $_->name .", T ype = ". $_->sensorType . ", Label = ". $_->healthState->label . ", Summary = ". $_->healthState->summary . ", Key = " . $_->healthState->key . "\n"; if (check_health_state($_->healthState-> key) ne 'OK') { $output .= ", " if ($output); $output .= $_->sensorType . " se

nsor " . $_->name . ": ".$_->healthState->summary; $AlertCount++; } else { $OKCount++; } } if ($output) { $output = "$AlertCount health issue(s) f ound: $output"; } else { $output = "All $OKCount health checks ar e Green"; $res = 'OK'; } $np->add_perfdata(label => "Alerts", value => $A lertCount); } } elsif (uc($subcommand) eq "MAINTENANCE") { my %host_maintenance_state = (0 => "no", 1 => "yes"); $output = "maintenance=" . $host_maintenance_state{$runt ime->inMaintenanceMode}; $res = 'OK'; } elsif ((uc($subcommand) eq "LIST") (uc($subcommand) eq "LISTV M")) { my %vm_state_strings = ("poweredOn" => "UP", "poweredOff " => "DOWN", "suspended" => "SUSPENDED"); my $vm_views = Vim::find_entity_views(view_type => 'Virt ualMachine', begin_entity => $host_view, properties => ['name', 'runtime']); die "Runtime error\n" if (!defined($vm_views)); die "There are no VMs.\n" if (!@$vm_views); my $up = 0; $output = ''; foreach my $vm (@$vm_views) { my $vm_state = $vm->runtime->powerState->val; $up += $vm_state eq "poweredOn"; $output .= $vm->name . "(" . $vm_state_strings{$ vm_state} . "), "; } chop($output); chop($output); $res = 'OK'; $output = $up . "/" . @$vm_views . " VMs up: " . $outpu t; $np->add_perfdata(label => "vmcount", value => $up, uom => 'units', threshold => $np->threshold); $res = $np->check_threshold(check => $up) if (defined($n

p->threshold)); } elsif (uc($subcommand) eq "STATUS") { my $status = $host_view->overallStatus->val; $output = "overall status=" . $status; $res = check_health_state($status); } elsif (uc($subcommand) eq "ISSUES") { my $issues = $host_view->configIssue; if (defined($issues)) { $output = ''; foreach (@$issues) { $output .= $_->vm->name . ": " . $_->ful lFormattedMessage . "(caused by " . $_->userName . "); "; } } else { $res = 'OK'; $output = 'No config issues'; } } else { $res = 'CRITICAL'; $output = "HOST RUNTIME - unknown subcommand\n" . $np->o pts->_help; } } else { my %host_maintenance_state = (0 => "no", 1 => "yes"); my $vm_views = Vim::find_entity_views(view_type => 'VirtualMachi ne', begin_entity => $host_view, properties => ['name', 'runtime']); my $up = 0; die "Runtime error\n" if (!defined($vm_views)); if (@$vm_views) { foreach my $vm (@$vm_views) { $up += $vm->runtime->powerState->val eq "powered On"; } $np->add_perfdata(label => "vmcount", value => $up, uom => 'units', threshold => $np->threshold); $output = $up . "/" . @$vm_views . " VMs up"; } else { $output = "No VMs installed"; } my $AlertCount = 0; my $SensorCount = 0; my ($cpuStatusInfo, $storageStatusInfo, $memoryStatusInfo, $nume

ricSensorInfo); if(defined($runtime->healthSystemRuntime)) { $cpuStatusInfo = $runtime->healthSystemRuntime->hardware StatusInfo->cpuStatusInfo; $storageStatusInfo = $runtime->healthSystemRuntime->hard wareStatusInfo->storageStatusInfo; $memoryStatusInfo = $runtime->healthSystemRuntime->hardw areStatusInfo->memoryStatusInfo; $numericSensorInfo = $runtime->healthSystemRuntime->syst emHealthInfo->numericSensorInfo; } if (defined($cpuStatusInfo)) { foreach (@$cpuStatusInfo) { $SensorCount++; $AlertCount++ if (check_health_state($_->status>key) ne 'OK'); } } if (defined($storageStatusInfo)) { foreach (@$storageStatusInfo) { $SensorCount++; $AlertCount++ if (check_health_state($_->status>key) ne 'OK'); } } if (defined($memoryStatusInfo)) { foreach (@$memoryStatusInfo) { $SensorCount++; $AlertCount++ if (check_health_state($_->status>key) ne 'OK'); } } if (defined($numericSensorInfo)) { foreach (@$numericSensorInfo) { $SensorCount++; $AlertCount++ if (check_health_state($_->healthS tate->key) ne 'OK'); } } $res = 'OK'; $output .= ", overall status=" . $host_view->overallStatus->val . ", connection state=" . $runtime->connectionState->val . ", maintenance=" . $h ost_maintenance_state{$runtime->inMaintenanceMode} . ", "; if ($AlertCount) {

$output .= "$AlertCount health issue(s), "; } else { $output .= "All $SensorCount health checks are Green, "; } my $issues = $host_view->configIssue; if (defined($issues)) { $output .= @$issues . " config issue(s)"; } else { $output .= "no config issues"; } } return ($res, $output); } sub host_service_info { my ($host, $np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'HOST RUNTIME Unknown error'; my $host_view = Vim::find_entity_view(view_type => 'HostSystem', filter => $host, properties => ['name', 'configManager']); die "Host \"" . $$host{"name"} . "\" does not exist\n" if (!defined($hos t_view)); my $services = Vim::get_view(mo_ref => $host_view->configManager->servic eSystem)->serviceInfo->service; if (defined($subcommand)) { $subcommand = ',' . $subcommand . ','; $output = ''; foreach (@$services) { my $srvname = $_->key; if ($subcommand =~ s/,$srvname,/,/g) { while ($subcommand =~ s/,$srvname,/,/g){}; $output .= $srvname . ", " if (!$_->running); } } $subcommand =~ s/^,//; chop($subcommand); if ($subcommand ne '') { $res = 'UNKNOWN'; $output = "unknown services : $subcommand"; } elsif ($output eq '') { $res = 'OK'; $output = "All services are in their apropriate state.";

} else { chop($output); chop($output); $output .= " are down"; } } else { my %service_state = (0 => "down", 1 => "up"); $res = 'OK'; $output = "services : "; $output .= $_->key . " (" . $service_state{$_->running} . "), " foreach (@$services); chop($output); chop($output); } return ($res, $output); } #========================================================================== VM ============================================================================# sub vm_cpu_info { my ($vmname, $np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'HOST-VM CPU Unknown error'; if (defined($subcommand)) { if (uc($subcommand) eq "USAGE") { $values = return_host_vmware_performance_values($vmname, 'cpu', ('usage.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) * 0.01); $np->add_perfdata(label => "cpu_usage", value => $value, uom => '%', threshold => $np->threshold); $output = "\"$vmname\" cpu usage=" . $value . " %"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "USAGEMHZ") { $values = return_host_vmware_performance_values($vmname, 'cpu', ('usagemhz.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value)); $np->add_perfdata(label => "cpu_usagemhz", value => $value, uom => 'Mhz', threshold => $np->threshold); $output = "\"$vmname\" cpu usage=" . $value . " MHz";

$res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "WAIT") { $values = return_host_vmware_performance_values($vmname, 'cpu', ('wait.summation:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value)); $np->add_perfdata(label => "cpu_wait", value => $value, uom => 'ms', threshold => $np->threshold); $output = "\"$vmname\" cpu wait=" . $value . " m s"; $res = $np->check_threshold(check => $value); } } else { $res = 'CRITICAL'; $output = "HOST-VM CPU - unknown subcommand\n" . $np->op ts->_help; } } else { $values = return_host_vmware_performance_values($vmname, 'cpu', ('usagemhz.average', 'usage.average', 'wait.summation:*')); if (defined($values)) { my $value1 = simplify_number(convert_number($$values[0][ 0]->value)); my $value2 = simplify_number(convert_number($$values[0][ 1]->value) * 0.01); my $value3 = simplify_number(convert_number($$values[0][ 2]->value)); $np->add_perfdata(label => "cpu_usagemhz", value => $val ue1, uom => 'Mhz', threshold => $np->threshold); $np->add_perfdata(label => "cpu_usage", value => $value2 , uom => '%', threshold => $np->threshold); $np->add_perfdata(label => "cpu_wait", value => $value3, uom => 'ms', threshold => $np->threshold); $res = 'OK'; $output = "\"$vmname\" cpu usage=" . $value1 . " MHz(" . $value2 . "%) wait=" . $value3 . " ms"; } } return ($res, $output); } sub vm_mem_info { my ($vmname, $np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'HOST-VM MEM Unknown error'; if (defined($subcommand))

{ if (uc($subcommand) eq "USAGE") { $values = return_host_vmware_performance_values($vmname, 'mem', ('usage.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) * 0.01); $np->add_perfdata(label => "mem_usage", value => $value, uom => '%', threshold => $np->threshold); $output = "\"$vmname\" mem usage=" . $value . " %"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "USAGEMB") { $values = return_host_vmware_performance_values($vmname, 'mem', ('consumed.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) / 1024); $np->add_perfdata(label => "mem_usagemb", value => $value, uom => 'MB', threshold => $np->threshold); $output = "\"$vmname\" mem usage=" . $value . " MB"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "SWAP") { $values = return_host_vmware_performance_values($vmname, 'mem', ('swapped.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) / 1024); $np->add_perfdata(label => "mem_swap", value => $value, uom => 'MB', threshold => $np->threshold); $output = "\"$vmname\" swap usage=" . $value . " MB"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "SWAPIN") { $values = return_host_vmware_performance_values($vmname, 'mem', ('swapin.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) / 1024); $np->add_perfdata(label => "mem_swapin", value = > $value, uom => 'MB', threshold => $np->threshold); $output = "\"$vmname\" swapin=" . $value . " MB" ; $res = $np->check_threshold(check => $value); }

} elsif (uc($subcommand) eq "SWAPOUT") { $values = return_host_vmware_performance_values($vmname, 'mem', ('swapout.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) / 1024); $np->add_perfdata(label => "mem_swapout", value => $value, uom => 'MB', threshold => $np->threshold); $output = "\"$vmname\" swapout=" . $value . " MB "; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "OVERHEAD") { $values = return_host_vmware_performance_values($vmname, 'mem', ('overhead.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) / 1024); $np->add_perfdata(label => "mem_overhead", value => $value, uom => 'MB', threshold => $np->threshold); $output = "\"$vmname\" mem overhead=" . $value . " MB"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "OVERALL") { $values = return_host_vmware_performance_values($vmname, 'mem', ('consumed.average', 'overhead.average')); if (defined($values)) { my $value = simplify_number((convert_number($$va lues[0][0]->value) + convert_number($$values[0][1]->value)) / 1024); $np->add_perfdata(label => "mem_overall", value => $value, uom => 'MB', threshold => $np->threshold); $output = "\"$vmname\" mem overall=" . $value . " MB"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "ACTIVE") { $values = return_host_vmware_performance_values($vmname, 'mem', ('active.average')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) / 1024); $np->add_perfdata(label => "mem_active", value = > $value, uom => 'MB', threshold => $np->threshold); $output = "\"$vmname\" mem active=" . $value . " MB"; $res = $np->check_threshold(check => $value); }

} else { $res = 'CRITICAL'; $output = "HOST-VM MEM - unknown subcommand\n" . $np->op ts->_help; } } else { $values = return_host_vmware_performance_values($vmname, 'mem', ('consumed.average', 'usage.average', 'overhead.average', 'active.average', 'swa pped.average', 'swapin.average', 'swapout.average')); if (defined($values)) { my $value1 = simplify_number(convert_number($$values[0][ 0]->value) / 1024); my $value2 = simplify_number(convert_number($$values[0][ 1]->value) * 0.01); my $value3 = simplify_number(convert_number($$values[0][ 2]->value) / 1024); my $value4 = simplify_number(convert_number($$values[0][ 3]->value) / 1024); my $value5 = simplify_number(convert_number($$values[0][ 4]->value) / 1024); my $value6 = simplify_number(convert_number($$values[0][ 5]->value) / 1024); my $value7 = simplify_number(convert_number($$values[0][ 6]->value) / 1024); $np->add_perfdata(label => "mem_usagemb", value => $valu e1, uom => 'MB', threshold => $np->threshold); $np->add_perfdata(label => "mem_usage", value => $value2 , uom => '%', threshold => $np->threshold); $np->add_perfdata(label => "mem_overhead", value => $val ue3, uom => 'MB', threshold => $np->threshold); $np->add_perfdata(label => "mem_active", value => $value 4, uom => 'MB', threshold => $np->threshold); $np->add_perfdata(label => "mem_swap", value => $value5, uom => 'MB', threshold => $np->threshold); $res = 'OK'; $output = "\"$vmname\" mem usage=" . $value1 . " MB(" . $value2 . "%), overhead=" . $value3 . " MB, active=" . $value4 . " MB, swapped= " . $value5 . " MB, swapin=" . $value6 . " MB, swapout=" . $value7 . " MB"; } } return ($res, $output); } sub vm_net_info { my ($vmname, $np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'HOST-VM NET Unknown error'; if (defined($subcommand)) { if (uc($subcommand) eq "USAGE") {

$values = return_host_vmware_performance_values($vmname, 'net', ('usage.average:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value)); $np->add_perfdata(label => "net_usage", value => $value, uom => 'KBps', threshold => $np->threshold); $output = "\"$vmname\" net usage=" . $value . " KBps"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "RECEIVE") { $values = return_host_vmware_performance_values($vmname, 'net', ('received.average:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value)); $np->add_perfdata(label => "net_receive", value => $value, uom => 'KBps', threshold => $np->threshold); $output = "\"$vmname\" net receive=" . $value . " KBps"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "SEND") { $values = return_host_vmware_performance_values($vmname, 'net', ('transmitted.average:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value)); $np->add_perfdata(label => "net_send", value => $value, uom => 'KBps', threshold => $np->threshold); $output = "\"$vmname\" net send=" . $value . " K Bps"; $res = $np->check_threshold(check => $value); } } else { $res = 'CRITICAL'; $output = "HOST-VM NET - unknown subcommand\n" . $np->op ts->_help; } } else { $values = return_host_vmware_performance_values($vmname, 'net', ('received.average:*', 'transmitted.average:*')); if (defined($values)) { my $value1 = simplify_number(convert_number($$values[0][ 0]->value)); my $value2 = simplify_number(convert_number($$values[0][ 1]->value));

$np->add_perfdata(label => "net_receive", value => $valu e1, uom => 'KBps', threshold => $np->threshold); $np->add_perfdata(label => "net_send", value => $value2, uom => 'KBps', threshold => $np->threshold); $res = 'OK'; $output = "\"$vmname\" net receive=" . $value1 . " KBps, send=" . $value2 . " KBps"; } } return ($res, $output); } sub vm_disk_io_info { my ($vmname, $np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'HOST-VM IO Unknown error'; if (defined($subcommand)) { if (uc($subcommand) eq "USAGE") { $values = return_host_vmware_performance_values($vmname, 'disk', ('usage.average:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) / 1024); $np->add_perfdata(label => "io_usage", value => $value, uom => 'MB', threshold => $np->threshold); $output = "\"$vmname\" io usage=" . $value . " M B"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "READ") { $values = return_host_vmware_performance_values($vmname, 'disk', ('read.average:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) / 1024); $np->add_perfdata(label => "io_read", value => $ value, uom => 'MB/s', threshold => $np->threshold); $output = "\"$vmname\" io read=" . $value . " MB /s"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "WRITE") { $values = return_host_vmware_performance_values($vmname, 'disk', ('write.average:*')); if (defined($values)) { my $value = simplify_number(convert_number($$val ues[0][0]->value) / 1024);

$np->add_perfdata(label => "io_write", value => $value, uom => 'MB/s', threshold => $np->threshold); $output = "\"$vmname\" io write=" . $value . " M B/s"; $res = $np->check_threshold(check => $value); } } else { $res = 'CRITICAL'; $output = "HOST IO - unknown subcommand\n" . $np->opts-> _help; } } else { $values = return_host_vmware_performance_values($vmname, 'disk', ('usage.average:*', 'read.average:*', 'write.average:*')); if (defined($values)) { my $value1 = simplify_number(convert_number($$values[0][ 0]->value) / 1024); my $value2 = simplify_number(convert_number($$values[0][ 1]->value) / 1024); my $value3 = simplify_number(convert_number($$values[0][ 2]->value) / 1024); $np->add_perfdata(label => "io_usage", value => $value1, uom => 'MB', threshold => $np->threshold); $np->add_perfdata(label => "io_read", value => $value2, uom => 'MB/s', threshold => $np->threshold); $np->add_perfdata(label => "io_write", value => $value3, uom => 'MB/s', threshold => $np->threshold); $res = 'OK'; $output = "\"$vmname\" io usage=" . $value1 . " MB, read =" . $value2 . " MB/s, write=" . $value3 . " MB/s"; } } return ($res, $output); } sub vm_runtime_info { my ($vmname, $np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'HOST-VM RUNTIME Unknown error'; my $runtime; my $vm_view = Vim::find_entity_view(view_type => 'VirtualMachine', filte r => {name => $vmname}, properties => ['name', 'runtime', 'overallStatus', 'gues t', 'configIssue']); die "VMware machine \"" . $vmname . "\" does not exist\n" if (!defined($ vm_view)); $runtime = $vm_view->runtime; if (defined($subcommand)) { if (uc($subcommand) eq "CON") { $output = "\"$vmname\" connection state=" . $runtime->co

nnectionState->val; $res = 'OK' if ($runtime->connectionState->val eq "conne cted"); } elsif (uc($subcommand) eq "CPU") { $output = "\"$vmname\" max cpu=" . $runtime->maxCpuUsage . " MHz"; $res = 'OK'; } elsif (uc($subcommand) eq "MEM") { $output = "\"$vmname\" max mem=" . $runtime->maxMemoryUs age . " MB"; $res = 'OK'; } elsif (uc($subcommand) eq "STATE") { my %vm_state_strings = ("poweredOn" => "UP", "poweredOff " => "DOWN", "suspended" => "SUSPENDED"); $output = "\"$vmname\" run state=" . $vm_state_strings{$ runtime->powerState->val}; $res = 'OK' if ($runtime->powerState->val eq "poweredOn" ); } elsif (uc($subcommand) eq "STATUS") { my $status = $vm_view->overallStatus->val; $output = "\"$vmname\" overall status=" . $status; $res = check_health_state($status); } elsif (uc($subcommand) eq "CONSOLECONNECTIONS") { $output = "\"$vmname\" console connections=" . $runtime>numMksConnections; $res = $np->check_threshold(check => $runtime->numMksCon nections); } elsif (uc($subcommand) eq "GUEST") { my %vm_guest_state = ("running" => "Running", "notRunnin g" => "Not running", "shuttingDown" => "Shutting down", "resetting" => "Resettin g", "standby" => "Standby", "unknown" => "Unknown"); $output = "\"$vmname\" guest state=" . $vm_guest_state{$ vm_view->guest->guestState}; $res = 'OK' if ($vm_view->guest->guestState eq "running" ); } elsif (uc($subcommand) eq "TOOLS") { my %vm_tools_status = ("toolsNotInstalled" => "Not insta lled", "toolsNotRunning" => "Not running", "toolsOk" => "OK", "toolsOld" => "Old "); $output = "\"$vmname\" tools status=" . $vm_tools_status {$vm_view->guest->toolsStatus->val}; $res = 'OK' if ($vm_view->guest->toolsStatus->val eq "to olsOk"); } elsif (uc($subcommand) eq "ISSUES") {

my $issues = $vm_view->configIssue; if (defined($issues)) { $output = "\"$vmname\": "; foreach (@$issues) { $output .= $_->fullFormattedMessage . " (caused by " . $_->userName . "); "; } } else { $res = 'OK'; $output = "\"$vmname\" has no config issues"; } } else { $res = 'CRITICAL'; $output = "HOST-VM RUNTIME - unknown subcommand\n" . $np ->opts->_help; } } else { my %vm_state_strings = ("poweredOn" => "UP", "poweredOff" => "DO WN", "suspended" => "SUSPENDED"); my %vm_tools_status = ("toolsNotInstalled" => "Not installed", " toolsNotRunning" => "Not running", "toolsOk" => "OK", "toolsOld" => "Old"); my %vm_guest_state = ("running" => "Running", "notRunning" => "N ot running", "shuttingDown" => "Shutting down", "resetting" => "Resetting", "sta ndby" => "Standby", "unknown" => "Unknown"); $res = 'OK'; $output = "\"$vmname\" status=" . $vm_view->overallStatus->val . ", run state=" . $vm_state_strings{$runtime->powerState->val} . ", guest state= " . $vm_guest_state{$vm_view->guest->guestState} . ", max cpu=" . $runtime->maxC puUsage . " MHz, max mem=" . $runtime->maxMemoryUsage . " MB, console connection s=" . $runtime->numMksConnections . ", tools status=" . $vm_tools_status{$vm_vie w->guest->toolsStatus->val} . ", "; my $issues = $vm_view->configIssue; if (defined($issues)) { $output .= @$issues . " config issue(s)"; } else { $output .= "has no config issues"; } } return ($res, $output); } #========================================================================== DC ============================================================================# sub return_cluster_DRS_recommendations { my ($np, $cluster_name) = @_; my $res = 'OK';

my $output; my @clusters; if (defined($cluster_name)) { my $cluster = Vim::find_entity_view(view_type => 'ClusterCompute Resource', filter => $cluster_name, properties => ['name']); die "cluster \"" . $$cluster_name{"name"} . "\" does not exist\n " if (!defined($cluster)); push(@clusters, $cluster); } else { my $cluster = Vim::find_entity_views(view_type => 'ClusterComput eResource', properties => ['name', 'recommendation']); die "Runtime error\n" if (!defined($cluster)); die "There are no clusters\n" if (!@$cluster); @clusters = @$cluster; } foreach my $cluster_view (@clusters) { my ($recommends) = $cluster_view->recommendation; if (defined($recommends)) { my $value = 0; foreach my $recommend (@$recommends) { $value = $recommend->rating if ($recommend->rati ng > $value); $output .= "(" . $recommend->rating . ") " . $re commend->reason . " : " . $recommend->reasonText . "; "; } $res = $np->check_threshold(check => $value); } } if (defined($output)) { $output = "Recommendations:" . $output; } else { $output = "No recommendations"; } return ($res, $output); } sub dc_cpu_info { my ($np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'DC CPU Unknown error'; if (defined($subcommand)) { if (uc($subcommand) eq "USAGE") {

$values = return_dc_performance_values('cpu', ('usage.av erage')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value) * 0 .01, @$values); $value = simplify_number($value / @$values); $np->add_perfdata(label => "cpu_usage", value => $value, uom => '%', threshold => $np->threshold); $output = "cpu usage=" . $value . " %"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "USAGEMHZ") { $values = return_dc_performance_values('cpu', ('usagemhz .average')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value), @$ values); $value = simplify_number($value); $np->add_perfdata(label => "cpu_usagemhz", value => $value, uom => 'Mhz', threshold => $np->threshold); $output = "cpu usagemhz=" . $value . " MHz"; $res = $np->check_threshold(check => $value); } } else { $res = 'CRITICAL'; $output = "DC CPU - unknown subcommand\n" . $np->opts->_ help; } } else { $values = return_dc_performance_values('cpu', ('usagemhz.average ', 'usage.average')); if (defined($values)) { my $value1 = 0; my $value2 = 0; grep($value1 += convert_number($$_[0]->value), @$values) ; grep($value2 += convert_number($$_[1]->value) * 0.01, @$ values); $value1 = simplify_number($value1); $value2 = simplify_number($value2 / @$values); $np->add_perfdata(label => "cpu_usagemhz", value => $val ue1, uom => 'Mhz', threshold => $np->threshold); $np->add_perfdata(label => "cpu_usage", value => $value2 , uom => '%', threshold => $np->threshold); $res = 'OK'; $output = "cpu usage=" . $value1 . " MHz (" . $value2 . "%)"; } }

return ($res, $output); } sub dc_mem_info { my ($np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'DC MEM Unknown error'; if (defined($subcommand)) { if (uc($subcommand) eq "USAGE") { $values = return_dc_performance_values('mem', ('usage.av erage')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value) * 0 .01, @$values); $value = simplify_number($value / @$values); $np->add_perfdata(label => "mem_usage", value => $value, uom => '%', threshold => $np->threshold); $output = "mem usage=" . $value . " %"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "USAGEMB") { $values = return_dc_performance_values('mem', ('consumed .average')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value) / 1 024, @$values); $value = simplify_number($value); $np->add_perfdata(label => "mem_usagemb", value => $value, uom => 'MB', threshold => $np->threshold); $output = "mem usage=" . $value . " MB"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "SWAP") { $values = return_dc_performance_values('mem', ('swapused .average')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value) / 1 024, @$values); $value = simplify_number($value); $np->add_perfdata(label => "mem_swap", value => $value, uom => 'MB', threshold => $np->threshold); $output = "swap usage=" . $value . " MB"; $res = $np->check_threshold(check => $value); }

} elsif (uc($subcommand) eq "OVERHEAD") { $values = return_dc_performance_values('mem', ('overhead .average')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value) / 1 024, @$values); $value = simplify_number($value); $np->add_perfdata(label => "mem_overhead", value => $value, uom => 'MB', threshold => $np->threshold); $output = "overhead=" . $value . " MB"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "OVERALL") { $values = return_dc_performance_values('mem', ('consumed .average', 'overhead.average')); if (defined($values)) { my $value = 0; grep($value += (convert_number($$_[0]->value) + convert_number($$_[1]->value)) / 1024, @$values); $value = simplify_number($value); $np->add_perfdata(label => "mem_overhead", value => $value, uom => 'MB', threshold => $np->threshold); $output = "overall=" . $value . " MB"; $res = $np->check_threshold(check => $value); } } else { $res = 'CRITICAL'; $output = "DC MEM - unknown subcommand\n" . $np->opts->_ help; } } else { $values = return_dc_performance_values('mem', ('consumed.average ', 'usage.average', 'overhead.average', 'swapused.average')); if (defined($values)) { my $value1 = 0; my $value2 = 0; my $value3 = 0; my $value4 = 0; grep($value1 += convert_number($$_[0]->value) / 1024, @$ values); grep($value2 += convert_number($$_[1]->value) * 0.01, @$ values); grep($value3 += convert_number($$_[2]->value) / 1024, @$ values); grep($value4 += convert_number($$_[3]->value) / 1024, @$ values); $value1 = simplify_number($value1); $value2 = simplify_number($value2 / @$values);

$value3 = simplify_number($value3); $value4 = simplify_number($value4); $np->add_perfdata(label => "mem_usagemb", value => $valu e1, uom => 'MB', threshold => $np->threshold); $np->add_perfdata(label => "mem_usage", value => $value2 , uom => '%', threshold => $np->threshold); $np->add_perfdata(label => "mem_overhead", value => $val ue3, uom => 'MB', threshold => $np->threshold); $np->add_perfdata(label => "mem_swap", value => $value4, uom => 'MB', threshold => $np->threshold); $res = 'OK'; $output = "mem usage=" . $value1 . " MB (" . $value2 . " %), overhead=" . $value3 . " MB, swapped=" . $value4 . " MB"; } } return ($res, $output); } sub dc_net_info { my ($np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'DC NET Unknown error'; if (defined($subcommand)) { if (uc($subcommand) eq "USAGE") { $values = return_dc_performance_values('net', ('usage.av erage:*')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value), @$ values); $value = simplify_number($value); $np->add_perfdata(label => "net_usage", value => $value, uom => 'KBps', threshold => $np->threshold); $output = "net usage=" . $value . " KBps"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "RECEIVE") { $values = return_dc_performance_values('net', ('received .average:*')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value), @$ values); $value = simplify_number($value); $np->add_perfdata(label => "net_receive", value => $value, uom => 'KBps', threshold => $np->threshold); $output = "net receive=" . $value . " KBps"; $res = $np->check_threshold(check => $value); } }

elsif (uc($subcommand) eq "SEND") { $values = return_dc_performance_values('net', ('transmit ted.average:*')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value), @$ values); $value = simplify_number($value); $np->add_perfdata(label => "net_send", value => $value, uom => 'KBps', threshold => $np->threshold); $output = "net send=" . $value . " KBps"; $res = $np->check_threshold(check => $value); } } else { $res = 'CRITICAL'; $output = "DC NET - unknown subcommand\n" . $np->opts->_ help; } } else { $values = return_dc_performance_values('net', ('received.average :*', 'transmitted.average:*')); if (defined($values)) { my $value1 = 0; my $value2 = 0; grep($value1 += convert_number($$_[0]->value), @$values) ; grep($value2 += convert_number($$_[1]->value), @$values) ; $value1 = simplify_number($value1); $value2 = simplify_number($value2); $np->add_perfdata(label => "net_receive", value => $valu e1, uom => 'KBps', threshold => $np->threshold); $np->add_perfdata(label => "net_send", value => $value2, uom => 'KBps', threshold => $np->threshold); $res = 'OK'; $output = "net receive=" . $value1 . " KBps, send=" . $v alue2 . " KBps"; } } return ($res, $output); } sub dc_list_vm_volumes_info { my ($np, $subcommand, $blacklist, $perc) = @_; my $res = 'CRITICAL'; my $output = 'DC VM VOLUMES Unknown error'; if (defined($subcommand)) { $output = "No volume named $subcommand found";

my $host_views = Vim::find_entity_views(view_type => 'HostSystem ', properties => ['name', 'datastore']); die "Runtime error\n" if (!defined($host_views)); die "Datacenter does not contain any hosts\n" if (!@$host_views) ; HOSTITER: foreach my $host (@$host_views) { foreach my $ref_store (@{$host->datastore}) { my $store = Vim::get_view(mo_ref => $ref_store, properties => ['summary', 'info']); if ($store->summary->name eq $subcommand) { $res = 'OK'; my $value1 = simplify_number(convert_num ber($store->summary->freeSpace) / 1024 / 1024); my $value2 = simplify_number(convert_num ber($store->info->freeSpace) / convert_number($store->summary->capacity) * 100); if ($perc) { $res = $np->check_threshold(chec k => $value2); } else { $res = $np->check_threshold(chec k => $value1); } $np->add_perfdata(label => $store->summa ry->name, value => $perc?$value2:$value1, uom => $perc?'%':'MB', threshold => $n p->threshold); $output = $store->summary->name . "=". $ value1 . " MB (" . $value2 . "%)"; last HOSTITER; } } } } else { $res = OK; $output = ''; my $host_views = Vim::find_entity_views(view_type => 'HostSystem ', properties => ['name', 'datastore']); die "Runtime error\n" if (!defined($host_views)); die "Datacenter does not contain any hosts\n" if (!@$host_views) ; foreach my $host (@$host_views) { foreach my $ref_store (@{$host->datastore}) { my $store = Vim::get_view(mo_ref => $ref_store, properties => ['summary', 'info']); if (defined($blacklist)) { my $name = $store->summary->name; next if ($blacklist =~ m/(^ \s \t ,)\Q$n ame\E($ \s \t ,)/); }

my $value1 = simplify_number(convert_number($sto re->summary->freeSpace) / 1024 / 1024); my $value2 = simplify_number(convert_number($sto re->info->freeSpace) / convert_number($store->summary->capacity) * 100); if ($perc) { $res = Nagios::Plugin::Functions::max_st ate($res, $np->check_threshold(check => $value2)); } else { $res = Nagios::Plugin::Functions::max_st ate($res, $np->check_threshold(check => $value1)); } $np->add_perfdata(label => $store->summary->name , value => $perc?$value2:$value1, uom => $perc?'%':'MB', threshold => $np->thres hold); $output .= $store->summary->name . "=". $value1 . " MB (" . $value2 . "%), "; } } chop($output); chop($output); $output = "storages : " . $output; } return ($res, $output); } sub dc_disk_io_info { my ($np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'DC IO Unknown error'; if (defined($subcommand)) { if (uc($subcommand) eq "ABORTED") { $values = return_dc_performance_values('disk', ('command sAborted.summation:*')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value), @$ values); $value = simplify_number($value, 0); $np->add_perfdata(label => "io_aborted", value = > $value, threshold => $np->threshold); $output = "io commands aborted=" . $value; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "RESETS") { $values = return_dc_performance_values('disk', ('busRese

ts.summation:*')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value), @$ values); $value = simplify_number($value, 0); $np->add_perfdata(label => "io_busresets", value => $value, threshold => $np->threshold); $output = "io bus resets=" . $value; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "READ") { $values = return_dc_performance_values('disk', ('totalRe adLatency.average:*')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value), @$ values); $value = simplify_number($value, 0); $np->add_perfdata(label => "io_read", value => $ value, uom => 'ms', threshold => $np->threshold); $output = "io read latency=" . $value . " ms"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "WRITE") { $values = return_dc_performance_values('disk', ('totalWr iteLatency.average:*')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value), @$ values); $value = simplify_number($value, 0); $np->add_perfdata(label => "io_write", value => $value, uom => 'ms', threshold => $np->threshold); $output = "io write latency=" . $value . " ms"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "KERNEL") { $values = return_dc_performance_values('disk', ('kernelL atency.average:*')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value), @$ values); $value = simplify_number($value, 0); $np->add_perfdata(label => "io_kernel", value => $value, uom => 'ms', threshold => $np->threshold); $output = "io kernel latency=" . $value . " ms"; $res = $np->check_threshold(check => $value); }

} elsif (uc($subcommand) eq "DEVICE") { $values = return_dc_performance_values('disk', ('deviceL atency.average:*')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value), @$ values); $value = simplify_number($value, 0); $np->add_perfdata(label => "io_device", value => $value, uom => 'ms', threshold => $np->threshold); $output = "io device latency=" . $value . " ms"; $res = $np->check_threshold(check => $value); } } elsif (uc($subcommand) eq "QUEUE") { $values = return_dc_performance_values('disk', ('queueLa tency.average:*')); if (defined($values)) { my $value = 0; grep($value += convert_number($$_[0]->value), @$ values); $value = simplify_number($value, 0); $np->add_perfdata(label => "io_queue", value => $value, uom => 'ms', threshold => $np->threshold); $output = "io queue latency=" . $value . " ms"; $res = $np->check_threshold(check => $value); } } else { $res = 'CRITICAL'; $output = "DC IO - unknown subcommand\n" . $np->opts->_h elp; } } else { $values = return_dc_performance_values('disk', ('commandsAborted .summation:*', 'busResets.summation:*', 'totalReadLatency.average:*', 'totalWrit eLatency.average:*', 'kernelLatency.average:*', 'deviceLatency.average:*', 'queu eLatency.average:*')); if (defined($values)) { my $value1 = 0; my $value2 = 0; my $value3 = 0; my $value4 = 0; my $value5 = 0; my $value6 = 0; my $value7 = 0; grep($value1 += convert_number($$_[0]->value), @$values) ; grep($value2 += convert_number($$_[1]->value), @$values) ; grep($value3 += convert_number($$_[2]->value), @$values)

; grep($value4 += convert_number($$_[3]->value), @$values) ; grep($value5 += convert_number($$_[4]->value), @$values) ; grep($value6 += convert_number($$_[5]->value), @$values) ; grep($value7 += convert_number($$_[6]->value), @$values) ; $value1 = simplify_number($value1, 0); $value2 = simplify_number($value2, 0); $value3 = simplify_number($value3, 0); $value4 = simplify_number($value4, 0); $value5 = simplify_number($value5, 0); $value6 = simplify_number($value6, 0); $value7 = simplify_number($value7, 0); $np->add_perfdata(label => "io_aborted", value => $value 1, threshold => $np->threshold); $np->add_perfdata(label => "io_busresets", value => $val ue2, threshold => $np->threshold); $np->add_perfdata(label => "io_read", value => $value3, uom => 'ms', threshold => $np->threshold); $np->add_perfdata(label => "io_write", value => $value4, uom => 'ms', threshold => $np->threshold); $np->add_perfdata(label => "io_kernel", value => $value5 , uom => 'ms', threshold => $np->threshold); $np->add_perfdata(label => "io_device", value => $value6 , uom => 'ms', threshold => $np->threshold); $np->add_perfdata(label => "io_queue", value => $value7, uom => 'ms', threshold => $np->threshold); $res = 'OK'; $output = "io commands aborted=" . $value1 . ", io bus r esets=" . $value2 . ", io read latency=" . $value3 . " ms, write latency=" . $va lue4 . " ms, kernel latency=" . $value5 . " ms, device latency=" . $value6 . " m s, queue latency=" . $value7 ." ms"; } } return ($res, $output); } sub dc_runtime_info { my ($np, $subcommand) = @_; my $res = 'CRITICAL'; my $output = 'DC RUNTIME Unknown error'; my $runtime; my $dc_view = Vim::find_entity_view(view_type => 'Datacenter', propertie s => ['name', 'overallStatus', 'configIssue']); die "There are no Datacenter\n" if (!defined($dc_view)); if (defined($subcommand)) { if ((uc($subcommand) eq "LIST") ) { my %vm_state_strings = ("poweredOn" => "UP", "poweredOff " => "DOWN", "suspended" => "SUSPENDED");

(uc($subcommand) eq "LISTVM")

my $vm_views = Vim::find_entity_views(view_type => 'Virt ualMachine', properties => ['name', 'runtime']); die "Runtime error\n" if (!defined($vm_views)); die "There are no VMs.\n" if (!@$vm_views); my $up = 0; $output = ''; foreach my $vm (@$vm_views) { my $vm_state = $vm->runtime->powerState->val; $up += $vm_state eq "poweredOn"; $output .= $vm->name . "(" . $vm_state_strings{$ vm_state} . "), "; } chop($output); chop($output); $res = 'OK'; $output = $up . "/" . @$vm_views . " VMs up: " . $outpu t; $np->add_perfdata(label => "vmcount", value => $up, uom => 'units', threshold => $np->threshold); $res = $np->check_threshold(check => $up) if (defined($n p->threshold)); } elsif (uc($subcommand) eq "LISTHOST") { my %host_state_strings = ("poweredOn" => "UP", "poweredO ff" => "DOWN", "suspended" => "SUSPENDED"); my $host_views = Vim::find_entity_views(view_type => 'Ho stSystem'); die "Runtime error\n" if (!defined($host_views)); die "There are no VMs.\n" if (!@$host_views); my $up = 0; $output = ''; foreach my $host (@$host_views) { $host->update_view_data(); my $host_state = $host->runtime->powerState->val ; $up += $host_state eq "poweredOn"; $output .= $host->name . "(" . $host_state_strin gs{$host_state} . "), "; } chop($output); chop($output); $res = 'OK'; $output = $up . "/" . @$host_views . " Hosts up: " . $o utput; $np->add_perfdata(label => "hostcount", value => $up, uo m => 'units', threshold => $np->threshold); $res = $np->check_threshold(check => $up) if (defined($n p->threshold)); } elsif (uc($subcommand) eq "STATUS") { my $status = $dc_view->overallStatus->val; $output = "overall status=" . $status; $res = check_health_state($status); }

elsif (uc($subcommand) eq "ISSUES") { my $issues = $dc_view->configIssue; if (defined($issues)) { $output = ''; foreach (@$issues) { $output .= $_->vm->name . ": " . $_->ful lFormattedMessage . "(caused by " . $_->userName . "); "; } } else { $res = 'OK'; $output = 'No config issues'; } } else { $res = 'CRITICAL'; $output = "HOST RUNTIME - unknown subcommand\n" . $np->o pts->_help; } } else { my %host_maintenance_state = (0 => "no", 1 => "yes"); my $vm_views = Vim::find_entity_views(view_type => 'VirtualMachi ne', properties => ['name', 'runtime']); my $up = 0; die "Runtime error\n" if (!defined($vm_views)); if (@$vm_views) { foreach my $vm (@$vm_views) { $up += $vm->runtime->powerState->val eq "powered On"; } $np->add_perfdata(label => "vmcount", value => $up, uom => 'units', threshold => $np->threshold); $output = $up . "/" . @$vm_views . " VMs up"; } else { $output = "No VMs installed"; } $res = 'OK'; $output .= ", overall status=" . $dc_view->overallStatus->val . ", "; my $issues = $dc_view->configIssue; if (defined($issues)) { $output .= @$issues . " config issue(s)"; } else {

$output .= "no config issues"; } } return ($res, $output); }