Scribd Logo
Upload

Welcome to Scribd!

  • 22 views

    307 Data

    Uploaded by

    ynadeem
    The DKG-307 is an automatic mains failure unit that monitors utility power and automatically starts and transfers a generator set upon loss of mains power. It monitors generator parameters, controls protection functions, and indicates operational status. Programmable timers, thresholds, and configurations allow customization. Remote monitoring via PC is possible using included software. The unit provides comprehensive generator control and monitoring in a small package.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    307 Data

    Uploaded by

    ynadeem
    22 views2 pages
    The DKG-307 is an automatic mains failure unit that monitors utility power and automatically starts and transfers a generator set upon loss of mains power. It monitors generator parameters, controls protection functions, and indicates operational status. Programmable timers, thresholds, and configurations allow customization. Remote monitoring via PC is possible using included software. The unit provides comprehensive generator control and monitoring in a small package.

    Original Title

    307_DATA

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The DKG-307 is an automatic mains failure unit that monitors utility power and automatically starts and transfers a generator set upon loss of mains power. It monitors generator parameters, controls protection functions, and indicates operational status. Programmable timers, thresholds, and configurations allow customization. Remote monitoring via PC is possible using included software. The unit provides comprehensive generator control and monitoring in a small package.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    22 views2 pages

    307 Data

    Uploaded by

    ynadeem
    The DKG-307 is an automatic mains failure unit that monitors utility power and automatically starts and transfers a generator set upon loss of mains power. It monitors generator parameters, controls protection functions, and indicates operational status. Programmable timers, thresholds, and configurations allow customization. Remote monitoring via PC is possible using included software. The unit provides comprehensive generator control and monitoring in a small package.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    DKG-307 AUTOMATIC MAINS FAILURE UNIT

    DESCRIPTION
    The DKG-307 is a comprehensive AMF unit for a single generating set operating in standby mode. In AUTOMATIC position, DKG-307 monitors mains phase voltages and controls the automatic starting, stopping and load transfer of the generating set in case of a mains failure and once the generator is running, it monitors internal protections and external fault inputs. . If a fault condition occurs, the unit shuts down the engine automatically and indicates the failure source with the corresponding red led lamp. The operation of the unit is controlled with front panel pushbuttons. The LOAD TEST, TEST, AUTO and OFF pushbuttons select the operating mode. Other buttons select the display parameter scroll, alarm mute and lamp test functions. The DKG-307 provides a comprehensive set of digitally adjustable timers, threshold levels, input and output configurations and operating sequences. The unauthorized access to program parameters is prevented by the program lock input. All programs may be modified via front panel pushbuttons, and do not require an external unit. The fault conditions are considered in 2 categories as Warnings and Alarms. Measured values have separate programmable limits for warning and alarm conditions. The service request indicator lamp turns on at the expiration of either engine hours or time limits. It is possible to monitor the operation of the system locally or remotely with the WINDOWS based PC utility program. The unit is designed for front panel mounting. It is fitted into the cut-out with the steel spring removed. Connections are made with 2 part plug and socket connectors. MEASUREMENTS Generator Volts: U-N, V-N, W-N Generator Volts: U-V, V-W, W-U Generator Amps: U, V, W Generator total KW Generator pf Generator Frequency, Mains Volts: R-N, S-N, T-N Mains Volts: R-S, S-T, T-R Battery Voltage Engine Coolant Temperature Engine Oil Pressure STATISTICS Following incremental counters provide statistics about past performance of the generating set: Engine Hours Run Engine Hours to Service Time to Service Number of Engine Cranks Number of Genset Runs Number of Genset on Load

    FEATURES
    Automatic mains failure Engine control Generator protection Built in alarms and warnings 3 phase mains voltage inputs 3 phase genset voltage inputs 3 phase genset CT inputs Engine oil pressure measurement Engine coolant temperature measurement Genset active power measurement Genset power factor measurement Periodic maintenance request indicator Daily / weekly / monthly exerciser Event logging with time stamp Statistical counters Battery backed-up real time clock Weekly operation schedule programs Field adjustable parameters RS-232 serial port Free MS-Windows Remote monitoring SW: -local, LAN, IP and modem connection -monitoring, download of parameters LED displays Configurable analogue inputs: 2 Configurable digital inputs: 7 Configurable relay outputs: 2 Total relay outputs: 6 I/O expansion capability Remote Start operation available Survives cranking dropouts Sealed front panel Plug-in connection system for easy replacement Small dimensions (165x125x48mm) Low cost

    EVENT LOGGING The DKG-307 records last 12 events with date and time stamp. Recorded events are: -alarms and warnings -generator on-load/off-load information Event records are only displayed on the PC screen. WEEKLY OPERATION SCHEDULE In AUTO mode only, the unit offers the capability of defining a weekly operation schedule. Programmable parameters allow the genset to operate automatically only in defined time limits of each weekday. The internal battery backed-up real time clock allows precise switching times. DIGITAL INPUTS The unit has 7 configurable digital inputs. Each input has following programmable parameters: -alarm type: shutdown / warning / no alarm -alarm polling: on engine running / always / on mains OK -latching / non-latching operation, -contact type: NO / NC -switching: BAT+ / BATANALOG INPUTS Engine analog inputs are provided for following functions: -Coolant temperature -Oil pressure The analog inputs connect to resistive sender units to provide precise and adjustable protection. The inputs have programmable sensor characteristics so that they are suitable for any type and any brand of sensors. RELAY OUTPUTS The unit provides 6 relay outputs and 2 of them have programmable functions, selectable from a list. In addition to genset control signals any specific alarm information may be output as a relay contact. Using two Relay Expansion Modules, the number of relays may be increased up to 22, 16 of them being volt-free contacts.

    TELEMETRY AND REMOTE PROGRAMMING The DKG-307 module provides the user with large telemetry facilities via its standard RS-232 serial port. The unit can be either connected to a PC or a modem for remote communication. The PC software offers local, Local Area Network (LAN), internet and modem operation capabilities. Note that the modem mode is also compatible with LAN and internet modes, so that the modem data may be served by PC for reuse in the LAN or internet. The PC program is used for below purposes: -parameter upload/download -remote monitoring -diagnostics and analysis The PC software detects automatically new versions over the internet. A menu system will guide the user if he desires to download the new version.

    TECHNICAL SPECIFICATIONS
    Alternator voltage: 15-300 V-AC (Ph-N) Alternator frequency: 0-100 Hz. Mains voltage: 300 V-AC max. (Ph-N) Mains frequency: 50/60 Hz. DC Supply Range: 9.0 to 33.0 V-DC Cranking dropouts: survives 0 V for 100ms. Typical Standby Current: 100 mA-DC Maximum Operating Current: 350 mA-DC (Relay outputs open) Generator Contactor Relay Output: 16 A / 250V Mains Contactor Relay Output: 16 A / 250V DC Relay Outputs: 10 A / 28V Charge excitation current: 54mA @ 12V-DC. Analog input range: 0-5000 ohms. Serial port: RS-232, 2400 bauds, no parity, 1 bit stop Operating temp.: -20C (-4F) to 70 C (158F). Storage temp.: -30C (-22F) to 80 C (176F). Maximum humidity: 95% non-condensing. IP Protection: IP65 from front panel, IP30 from the rear. Dimensions: 165 x 125 x 48 mm (WxHxD) Panel Cut-out Dimensions: 151x111 mm minimum. Mounting: Front panel mounted with rear retaining steel spring. Weight: 360 g (approx.) Case Material: High Temperature ABS (UL94-V0, 110C)

    DATAKOM Electronics Ltd. Tel : +90-216-466 84 60 Fax : +90-216-364 65 65

    http: www.datakom.com.tr e-mail : [email protected]

    You might also like