Scribd
Upload
1K views1 page

Automatic Packing Control Machine For Industrial Applications - Motor

This document describes an automatic packing control machine that uses a PLC (Programmable Logic Controller) based control unit to automate the packing process in small-scale industries. The control unit activates pneumatic actuators and a heater through solenoid valves to move a packing cover into place and seal packages, replacing manual packing methods that are time-consuming and labor-intensive. The design aims to provide an affordable automated packing solution for industrial applications.

Uploaded by

Cheedella Subbarao
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
1K views1 page

Automatic Packing Control Machine For Industrial Applications - Motor

This document describes an automatic packing control machine that uses a PLC (Programmable Logic Controller) based control unit to automate the packing process in small-scale industries. The control unit activates pneumatic actuators and a heater through solenoid valves to move a packing cover into place and seal packages, replacing manual packing methods that are time-consuming and labor-intensive. The design aims to provide an affordable automated packing solution for industrial applications.

Uploaded by

Cheedella Subbarao
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

PLC BASED AUTOMATIC PACKING CONTROL MACHINE

ABSTRACT:
In most of the small scale industries, the material packing is done by manually. This process takes more time and large human labours. There are number of packing machines are available in market. The cost of those machines is very high. Now the project has mainly concentrated on this difficulty, and hence a suitable electronic control unit has been designed such that the material can be packing in proper condition. The fabrication part of it has been considered with almost case for its simplicity and economy, such that this can be accommodated as one of the essential tools on industrial applications. control unit is used to control the pneumatic actuator and heater. The pneumatic air supply is given to the pneumatic actuator through the solenoid valve (5/2 type). The control unit activates the solenoid valve, the pneumatic actuator moves forward to the packing cover.

BLOCK DIAGRAM:

BATTERY

(CONTROL) UNIT

RELAY UNIT

MOTORIZED OPEN/CLOSE DOOR

RELAY UNIT

HEATER MOTOR

You might also like