Scribd Logo
Upload

Welcome to Scribd!

  • 190 views

    Brass Material Property Data Sheet

    Uploaded by

    Muzammil Ali Khan
    Vegas Fastener Manufacturing provides brass fasteners custom-made to specifications. The document describes the technical specifications of brass bar stock available for manufacturing, including its composition of 62.5-66.5% copper, 0.8-1.4% lead, and 34% zinc. It lists the material's physical and mechanical properties such as a density of 8.47 g/cc, tensile strength of 345 MPa, and elongation at break of 60%.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd

    Brass Material Property Data Sheet

    Uploaded by

    Muzammil Ali Khan
    190 views2 pages
    Vegas Fastener Manufacturing provides brass fasteners custom-made to specifications. The document describes the technical specifications of brass bar stock available for manufacturing, including its composition of 62.5-66.5% copper, 0.8-1.4% lead, and 34% zinc. It lists the material's physical and mechanical properties such as a density of 8.47 g/cc, tensile strength of 345 MPa, and elongation at break of 60%.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Vegas Fastener Manufacturing provides brass fasteners custom-made to specifications. The document describes the technical specifications of brass bar stock available for manufacturing, including its composition of 62.5-66.5% copper, 0.8-1.4% lead, and 34% zinc. It lists the material's physical and mechanical properties such as a density of 8.47 g/cc, tensile strength of 345 MPa, and elongation at break of 60%.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    190 views2 pages

    Brass Material Property Data Sheet

    Uploaded by

    Muzammil Ali Khan
    Vegas Fastener Manufacturing provides brass fasteners custom-made to specifications. The document describes the technical specifications of brass bar stock available for manufacturing, including its composition of 62.5-66.5% copper, 0.8-1.4% lead, and 34% zinc. It lists the material's physical and mechanical properties such as a density of 8.47 g/cc, tensile strength of 345 MPa, and elongation at break of 60%.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Brass Material Property Data Sheet

    Do you need custom fasteners created with Brass? Since our inception, Vegas Fastener Manufacturing has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary. Below are the technical specifications of the Brass Bar Stock we have available to meet your needs. Medium-leaded brass, UNS C34000, OSO25 Temper rod

    Subcategory: Brass; Copper Alloy; Metal; Nonferrous Metal Key Words: 340 brass, CZ118, ISO CuZn35Pb1, CEN CW600N
    Component Cu Fe Other Pb Zn Wt. % 62.5 - 66.5 Max 0.1 Max 0.5 0.8 - 1.4 34

    Material Notes:
    Please Note: Zinc content is calculated as a remainder. Fair to excellent corrosion resistance. Fabricated by blanking, heading and upsetting, machining, piercing and punching, roll threading and knurling, stamping. Applications: couplings, free machining screws and rivets, gears, nuts, or tire valve stems. Test specimen: rod - 25mm diameter. Physical Properties Metric Density Mechanical Properties Hardness, Rockwell F Tensile Strength, Ultimate Tensile Strength, Yield 70 345 MPa 135 MPa 70 50000 psi 19600 psi 0.5% extension under load 8.47 g/cc

    English 0.306 lb/in

    Comments at 20C (68F)

    Elongation at Break Modulus of Elasticity Poisson's Ratio Machinability Shear Modulus Shear Strength Electrical Properties Electrical Resistivity Thermal Properties CTE, linear 250C Heat Capacity Thermal Conductivity Melting Point Solidus Liquidus Processing Properties Annealing Temperature Recrystallization Temperature

    60 % 105 GPa 0.346 60 % 39 GPa 235 MPa

    60 % 15200 ksi 0.346 60 % 5660 ksi 34100 psi

    In 50 mm

    UNS C36000 (free-cutting brass) = 100%

    6.6e-006 ohm-cm

    6.6e-006 ohm-cm

    20.3 m/m-C 0.38 J/g-C

    11.3 in/in-F 0.0908 BTU/lb-F

    from 20-300C (68-570F)

    115 W/m-K 798 BTU-in/hr-ft-F 885 - 925 C 885 C 925 C 1630 - 1700 F 1630 F 1700 F

    at 20C (68F)

    425 - 650 C 288 C

    797 - 1200 F 550 F

    You might also like