XI Chem Ch7 Equilibrium Chapter Notes Nov
XI Chem Ch7 Equilibrium Chapter Notes Nov
XI Chem Ch7 Equilibrium Chapter Notes Nov
Class: XI
Chapter: Equilibrium
Top concepts
1. When the reactants in a closed vessel at a particular temperature react to
give products, the concentrations of the reactants keep on decreasing, while
those of products keep on increasing for some time after which there is no
change in the concentrations of either of the reactants or products. This stage
of the system is the dynamic equilibrium. At equilibrium rates of the forward
and reverse reactions become equal.
2. General characteristics of equilibrium involving physical processes
- Measurable properties of system becomes constant at equilibrium
- Equilibrium can be established only in case of closed system
- Equilibrium is always dynamic in nature i.e. the process does not stop
but changes take place in forward and reverse direction with same
rate
- When equilibrium is attained for a physical process, it is characterised
by constant value of one of its parameters at a given temperature. For
example for equilibrium
2 2
H O(l) H O(g) , the pressure becomes
constant
- The magnitude of the constant value of the concentration related
expression gives an indication of the extent to which the reaction
proceeds before acquiring equilibrium.
3. During a chemical reaction when the rates of the forward and reverse
reactions become equal, the concentrations of the reactants and the products
remain constant. This is the stage of chemical equilibrium. Chemical
equilibrium is dynamic in nature.
4. General characteristics of equilibrium involving chemical processes
- Chemical equilibrium is dynamic in nature
- Properties of system becomes constant at equilibrium and remains
unchanged thereafter
- Equilibrium can be established only in case of closed system
- Equilibrium can be approached from either direction
- A catalyst does not alter the equilibrium point
5. Law of mass action: Rate of a chemical reaction is directly proportional to the
product of molar concentration of the reactants at a constant temperature at
any given time.
6. Equilibrium Law or Law of Chemical Equilibrium: At a given temperature, the
product of concentrations of the reaction products raised to the respective
stoichiometric coefficient in the balanced chemical equation divided by the
product of concentrations of the reactants raised to their individual
stoichiometric coefficients has a constant value
7. Equilibrium reactions in which all reactants and products are in same phase
are called homogeneous equilibrium reactions.
8. Equilibrium reactions in which all reactants and products are in different
phases are called heterogeneous equilibrium reactions
9. For a general reaction of the type:
aA + bB cC + dD
The equilibrium constant may be represented as
c d
a b
c
c
[C] [D]
K=
[A] [B]
A and B are reactants
C and D are products
Expo nents a,b,c and d have same values as in balanced chemical equation
If the concentration expressed is in molar concentrations then K=K
[
i.e. K =
c d
a b
C] [D]
[A] [B]
10. For a gaseous reaction of the type:
aA + bB cC + dD
The equilibrium constant may be represented as
c d
C D
p
a b
A B
A B C D
[p ] [p ]
K =
[p ] [p ]
p ,p ,p ,p are the partial pressures of A, B, C and Drespectively
Exponents a,b,c and d have same values as in balanced chemical equation
11. Relation between
p
K and
c
K
n
p C
K =K (RT)
n=(number of moles of gaseous products) - (number of moles of gaseous reactants)
in the balanced chemical equation.
A
12. In heterogeneous equilibrium pure solids or liquids are present but their
concentrations or partial pressures do not appear in the expression of the
equilibrium constant.
13.Characteristic of equilibrium constant
- Equilibrium constants is applicable only when the concentration of reactants
and products have attained their equilibrium state
- The value of equilibrium constant is independent of initial concentrations of
the reactants and products
- Equilibrium constant has a definite value for every reaction at a particular
temperature
- Equilibrium constant for the reverse reaction is the inverse of the equilibrium
constant for the reaction in the forward direction
- The value of equilibrium constant tells the extent to which a reaction
proceeds in forward or reverse reaction
- Equilibrium constant is independent of presence of catalyst
14.Applications of equilibrium constant
1) Predicting the Extent of a Reaction
- If
C
K > 10
3
, products predominate over reactants, i.e., if
C
K is very large,
the reaction proceeds nearly to completion
- If
C
K < 10
-3
, reactants predominate over products, i.e., if
C
K is very small,
the reaction proceeds rarely
- If
C
K is in the range of 10
-3
to 10
3
, considerable concentrations of both
reactants and products are present
2) Predicting the Direction of the Reaction.
Reaction quotient (Q) is the ratio of product of concentration (or partial
pressure) of products to that of reactants at any stage of the reaction
- If
c C
Q >K , the reaction will proceed in the direction of reactants (reverse
reaction).
- If
c C
Q K < , the reaction will proceed in the direction of the products (forward
reaction)
- If
c C
Q K = , the reaction mixture is already at equilibrium.
3) Calculating Equilibrium Concentrations
15. Relation between Equilibrium constant K ,Reaction quotient (Q) and Gibbs
energy (G)
G
-
RT
K = e
A
u
- If, G A
u
< 0 then
G
-
RT
A
u
is positive, and
G
-
RT
e
A
u
>1, making K >1.This implies
reaction is spontaneous or the reaction proceeds in the forward direction to
form products predominantly.
- If, G A
u
>0 then
G
-
RT
A
u
is negative, and
G
-
RT
e
A
u
<1, making K <1.This implies
reaction is non-spontaneous or the reaction proceeds in the forward direction
to such a small degree that only a very minute quantity of product is formed.
16.According to Le Chateliers principle change in any of the factors that
determine the equilibrium conditions of a system will cause the system to
change in such a manner so as to reduce or to counteract the effect of the
change
1) Effect of Concentration Change
Shifts the
equilibrium to
Shifts the
equilibrium to
Increase in concentration of any of the
reactants Forward direction
Increase in concentration of any of the
products Backward direction
2) Effect of Pressure Change
Shifts the equilibrium
in direction of
Increase in Lesser number of
pressure
gaseous moles
Shifts the equilibrium
in direction of
Decrease in Larger number of
pressure
gaseous moles
3) Effect of Addition of an Inert Gas: Addition of an inert gas at constant
volume has no effect on equilibrium
4) Effect of Temperature
Shifts the equilibrium
in direction of
Decrease in Exothermic
temperature
reaction
5) Effect of a Catalyst
Catalyst does not shift the equilibrium in any direction because it
favours the forward and backward reaction equally
17. Substances that conduct electricity in their molten states or in form of their
aqueous solutions are called electrolytes
18.Substances which ionize almost completely into aqueous solutions are called
strong electrolytes
19.Ionic Equilibrium: Equilibrium established between unionized molecules and
ions in solution of weak electrolytes.
Shifts the equilibrium
in direction of
Increase in Endothermic
temperature
reaction
20.Substances which ionize to a small extent in aqueous solution are called weak
electrolytes
21.Acids, bases and salts which are electrolytes, conduction of electricity by their
aqueous solutions is due to anions and cations produced by the dissociation or
ionization of electrolytes in aqueous solution.
22.According to Arrhenius theory, acids are substances that dissociates in water
to give hydrogen ions H
+
(aq) and bases are substances that produce hydroxyl
ions OH
(aq).
23. Limitation of Arrhenius concept of acid and base: The concept is applicable
only to aqueous solutions and it does not account for the basicity of
substances like, ammonia which do not possess a hydroxyl group.
24.According to Brnsted-Lowry theory, acid is a substance that is capable of
donating a hydrogen ion H
+
and bases are substances capable of accepting a
hydrogen ion, H
+
.
25. The acid-base pair that differs only by one proton is called a conjugate acid-
base pair.
26.Conjugate acid has one extra proton and each conjugate base has one less
proton.
27. If Brnsted acid is a strong acid then its conjugate base is a weak base and
vice versa.
28. According to Lewis concept an acid as a species which accepts electron pair
and base which donates an electron pair.
29. Electron deficient species like AlCl
3
, Co
3+
, Mg
2+
, etc. can act as Lewis acids
while species like H
2
O, NH
3
, OH
-
etc. which can donate a pair of electrons, can
act as Lewis bases.
30. Unique ability of water to react with itself to produce a hydronium ion and a
hydroxyl ion is called self ionization or autoprotolysis of water.
+ -
2 2 3
H O(l) + H O(l) H O (aq) OH (aq)
Hydronium Hydroxyl
Ion ion
+
31.Ionic product of water is the product of concentration of hydronium ions and
hydroxyl ions
- +
2 2 3
+ -
3
2
2
2 + -
2 3
+ -
w 3
w
H O(l) + H O(l) OH (aq) +H O (aq)
[H O ][OH ]
K= ,
[H O]
K is Equilbrium constant
K[H O] [H O ][OH ]
K [H O ][OH ],
K is ionic product of water
=
=
32.In pure water, the concentration of hydronium ion is always equal to the
concentration of hydroxyl ion i.e. [ H
3
O
+
]= [OH
]
33.The pH of a solution is defined as the negative logarithm to the base 10 of the
activity of hydrogen ion i.e. pH = log [H
+
]
34. Types of solutions based on pH values
Types of solutions Hydrogen ion
concentration i.e. [H
+
] in
M
pH
Acidic [H
+
] > 1.0 10
7
M pH < 7.00
Basic [H
+
] < 1.0 10
7
M pH > 7.00
Neutral [H
+
] = 1.0 10
7
M pH = 7.00
35.
w
pK pH pOH 14 = + =
36.Dissociation constant or ionization constant (
a
K ) of a weak acid (HX) in water
is given by equation shown below.
+ - 2
a
[H ][X ] c
K =
[HX] (1- )
o
o
=
At a given temperature T,
a
K is a measure of the strength of the acid HX i.e.,
larger the value of
a
K ,the stronger is the acid.
37. Relation between
a
K and
a
pK :
a a
pK logK =
Larger the value of
a
pK , weaker is the acid
38.Dissociation constant or ionization constant (
b
K ) of a weak base (MOH) is
water is given by equation shown below.
At a given temperature T,
b
K is a measure of the strength of the base MOH i.e.,
larger the value of
b
K , the stronger is the base.
39. The degree of ionization is defined as the extent of ionization
40.Relation between
b
K and
b
pK
b b
pK logK =
Larger the value of
b
pK , weaker is the base.
41. Relation between
a
K and
b
K
a b w
K K K =
42.
a b w
pK pK pK 14 (at 298K) + = =
43.Bronsted acids which can donate more than one protons are called polyprotic
acids or polybasic acids.
44.Higher order higher order ionization constants (
a2
K
,
a3
K ) are smaller than
the lower order ionization constant (
a1
K ) of a polyprotic acid. The reason for
this is that it is more difficult to remove a positively charged proton from a
negative ion due to electrostatic forces.
45.Factors affecting acid strength:
- Extent of dissociation of acid (HA) depends on strength and polarity of
H-A bond in acid.
- As strength of H-A bond decreases acid strength increases
- As the electronegativity difference between the atoms H and A
increases ,charge separation between atoms increases, cleavage of the
bond becomes easy. Eventually acid dissociates easily increasing
acidity.
+ - 2
b
[M ][OH ] c
K =
[MOH] (1- )
o
o
=
46. Common ion Effect: If to an ionic equilibrium, a salt containing a common
ion is added, the equilibrium shifts in the backward direction. The shift in
equilibrium position caused by the addition or presence of an ion involved in
the equilibrium reaction is known as common ion effect
47.Interaction of anion or cation of the salt with water to produce an acidic or
basic solution is called hydrolysis of salt.
48.Hydrolysis of Salts and the pH of their Solutions
Type of acid and base
used to form salt
Example Type of solution formed
by hydrolysis of salt
Salt of strong acid and
weak base
NH
4
Cl Acidic solutions
Salt of weak acid and
strong base
CH
3
COONa Basic solutions
Salt of weak acid and
weak base
CH
3
COONH
4
Neutral solutions
Salt of strong acid and
strong base
NaCl Neutral solutions
49. A buffer solution resists a change in pH caused by dilution or the addition of
limited amounts of acid or base.
50. Acidic buffers contain equimolar quantities of a weak acid and one of its salt
with a strong base
51. Basic buffers contain equimolar quantities of a weak base and one of its salt
with a strong acid
52.Solubility is a measure of amount of solute that can be dissolved in a given
amount of solvent at a specific temperature
53. In a saturated solution equilibrium exists between the undissolved solute and
the solute in the solution.
54. Classification of salts on the basis of solubility
55. Solubility product of a salt at a given temperature is equal to product of
concentration of the ions in a saturated solution with each concentration term
raised to power equal to number of ions produced on dissociation of one mole
of substance.
In general if sparingly soluble salt , A
x
B
y
is in equilibrium with saturated
solution of its ions, then
y x
x y
A B xA yB
(solid)
+
= +
Solubility expression is:
y x x y
sp
K [A ] [B ]
+
=
56.Ionic product is defined as the product of the molar concentrations of the
constituent ions, each raised to the power of its stoichiometric coefficient in a
any solution.
57. Precipitation will occur only when ionic product exceeds the solubility product