BOOT PROM FLASH UPDATE V880

Sun Fire V480 and V880 With 900 MHz CPUs May Panic or "Red State" Due to Incorrect L2 SRAM Parameter Settings in Firmware Doc ID 55480 Date 10 July 03 V880 installation process. You must have time to reboot the server for the flash update to take place. Time for installation is about 30 minutes. 1. You must log in as root 2. From the sun patch site. Download the Boot prom patch and save to /h/PUBLIC http://sunsolve.sun.com/pub-cgi/findPatch.pl?patchId=112186&rev=08 File will be a .zip file. To unzip do the following 3. #cd /h/PUBLIC 4. #unzip 112186-09.zip View README and install patch. 5. #cd 112186-09 #more unix.flash-update.README Turn off security mode setting in order to install the firmware patch You will receive this error if you do not. ** ERROR: system security set: system firmware was not modified 6. #eeprom security-mode=none Now once you understand the readme install the patch. System will reboot immediately after installation is complete. 7. # ./unix.flash-update.SunFire880.sh Flash Update 2.4: Program and system initialization in progress... Current System Flash PROM Revision: ----------------------------------OBP 4.5.12 2002/03/27 13:59 Available System Flash PROM Revision: ------------------------------------OBP 4.10.7 2003/06/11 07:04 NOTE: The system will be rebooted (reset) after the firmware has been updated.

However, if an error occurs then the system will NOT be rebooted. Do you wish to update the firmware in the system Flash PROM? yes/no : yes Erasing the top half of the Flash PROM. Programming OBP into the top half of the Flash PROM. Verifying OBP in the top half of the Flash PROM. Erasing the bottom half of the Flash PROM. Programming OBP into the bottom half of Flash PROM. Verifying OBP in the bottom half of the Flash PROM. Erasing the top half of the Flash PROM. Programming POST into the top half of Flash PROM. Verifying POST in the top half of the Flash PROM. The system's Flash PROM firmware has been updated.

Please wait while the system is rebooted...

Shutdown started.

Mon Jul 14 17:58:01 GMT 2003

Changing to init state 6 - please wait Broadcast Message from root (pts/6) on archer Mon Jul 14 17:58:01... THE SYSTEM archer IS BEING SHUT DOWN NOW ! ! ! Log off now or risk your files being damaged *When system is back online log in and run the following command to verify installation. Specifically verify the PROM section. System PROM revisions: ---------------------OBP 4.10.7 2003/06/11 07:04 8. #/usr/platform/sun4u/sbin/prtdiag v System Configuration: Sun Microsystems sun4u Sun Fire 880 System clock frequency: 150 MHz Memory size: 8192 Megabytes ========================= CPUs =============================================== Run E$ CPU CPU Brd CPU MHz MB Impl. Mask

--A B A B

--0 1 2 3

---- ---- ------- ---900 8.0 US-III+ 2.2 900 8.0 US-III+ 2.2 900 8.0 US-III+ 2.2 900 8.0 US-III+ 2.2

========================= Memory Configuration =============================== Logical Logical Logical MC Bank Bank Bank DIMM Interleave Brd ID num size Status Size Factor with ---- --- ---- ------ ----------- ------ ---------- ----------A 0 0 512MB no_status 256MB 8-way A 0 1 512MB no_status 256MB 8-way A 0 2 512MB no_status 256MB 8-way A 0 3 512MB no_status 256MB 8-way B 1 0 512MB no_status 256MB 8-way B 1 1 512MB no_status 256MB 8-way B 1 2 512MB no_status 256MB 8-way B 1 3 512MB no_status 256MB 8-way A 2 0 512MB no_status 256MB 8-way A 2 1 512MB no_status 256MB 8-way A 2 2 512MB no_status 256MB 8-way A 2 3 512MB no_status 256MB 8-way B 3 0 512MB no_status 256MB 8-way B 3 1 512MB no_status 256MB 8-way B 3 2 512MB no_status 256MB 8-way B 3 3 512MB no_status 256MB 8-way

Interleaved

0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1

========================= IO Cards =========================

Bus Max IO Port Bus Freq Bus Dev, Brd Type ID Side Slot MHz Freq Func State Name Model ---- ---- ---- ---- ---- ---- ---- ---- ----- -------------------------------- ---------------------I/O PCI 8 B 3 33 33 2,0 ok pci-pci8086,b154.0/pci108e,1000 PCI-BRIDGE I/O PCI 8 B 3 33 33 0,0 ok pci108e,1000-pci108e,1000.1 device on pcibridge I/O PCI 8 B 3 33 33 0,1 ok SUNW,qfe-pci108e,1001 SUNW,pciqfe/pci-bridg+ I/O PCI 8 B 3 33 33 1,0 ok pci108e,1000-pci108e,1000.1 device on pcibridge I/O PCI 8 B 3 33 33 1,1 ok SUNW,qfe-pci108e,1001 SUNW,pciqfe/pci-bridg+

I/O PCI 8 B bridge I/O PCI 8 B qfe/pci-bridg+ I/O PCI 8 B bridge I/O PCI 8 B qfe/pci-bridg+ I/O PCI 8 B I/O PCI 9 A BRIDGE I/O PCI 9 A pci-bridge I/O PCI 9 A pci-bridge

3 3 3 3

33 33 2,0 ok 33 33 2,1 ok 33 33 3,0 ok 33 33 3,1 ok

pci108e,1000-pci108e,1000.1 SUNW,qfe-pci108e,1001 pci108e,1000-pci108e,1000.1 SUNW,qfe-pci108e,1001

device on pciSUNW,pcidevice on pciSUNW,pci-

1 33 33 4,0 ok SUNW,m64B SUNW,370-4362 7 66 66 2,0 ok pci-pci8086,b154.0/SUNW,qlc (scs+ PCI7 7 66 66 4,0 ok 66 66 5,0 ok SUNW,qlc-pci1077,2200.1077.4083.+ device on SUNW,qlc-pci1077,2200.1077.4083.+ device on

No failures found in System ===========================

========================= Environmental Status ========================= System Temperatures (Celsius): ------------------------------Device Temperature Status --------------------------------------CPU0 66 OK CPU1 71 OK CPU2 62 OK CPU3 62 OK General system failure Front Status Panel: ------------------Keyswitch position: NORMAL System LED Status: GEN FAULT [OFF] DISK FAULT [OFF]

REMOVE [OFF] POWER FAULT [OFF] RIGHT THERMAL FAULT

LEFT THERMAL FAULT [OFF] [OFF]

LEFT DOOR [OFF]

RIGHT DOOR [OFF]

================================= Disk Status: Presence Fault LED Remove LED DISK 0: [PRESENT] [OFF] [OFF] DISK 1: [PRESENT] [OFF] [OFF] DISK 2: [PRESENT] [OFF] [OFF] DISK 3: [PRESENT] [OFF] [OFF] DISK 4: [PRESENT] [OFF] [OFF] DISK 5: [PRESENT] [OFF] [OFF] DISK 6: [PRESENT]picl_get_propval_by_name for fault led_state failed General system failure ================================= Fan Bank : ---------Bank Speed ( RPMS ) ----------CPU0_PRIM_FAN CPU1_PRIM_FAN CPU0_SEC_FAN CPU1_SEC_FAN IO0_PRIM_FAN IO1_PRIM_FAN IO0_SEC_FAN IO1_SEC_FAN IO_BRIDGE_PRIM_FAN IO_BRIDGE_SEC_FAN Status Fan State

--------- --------2127 [ENABLED] OK 2205 [ENABLED] OK 0 [DISABLED] OK 0 [DISABLED] OK 3896 [ENABLED] OK 3797 [ENABLED] OK 0 [DISABLED] OK 0 [DISABLED] OK 3370 [ENABLED] OK 0 [DISABLED] OK

================================= Power Supplies: --------------Supply Status Fan Fail Temp Fail CS Fail ------ ------------ -------- --------- ------- ---- -PS0 GOOD 6 4 PS1 GOOD 6 4 PS2 GOOD 6 4 3.3V 5V 12V 48V --- --2 3 2 3 2 3

========================= HW Revisions ======================================= System PROM revisions: ---------------------OBP 4.10.7 2003/06/11 07:04 IO ASIC revisions: -----------------Port Brd Model ID Status Version ---- --------------- ---- ------ ------IB-1 unknown 8 ok 4 IB-1 unknown 9 ok 4 Now you need to set the security mode back to command. 10. # eeprom security-mode=command Changing PROM password: New password: Retype new password: Procedure complete. END