Scribd
Upload
36 views6 pages

Operation Instructions

The document provides instructions for setting up and using a fingerprint door lock, including how to: 1. Add batteries, register fingerprints for super master, master, and regular users, and enroll fingerprints. 2. Delete individual users by having a super master or master fingerprint verify the deletion. 3. Clear all fingerprints from the device using only the super master fingerprint. 4. Set the lock to either locked mode, where only fingerprints or keys can open it, or passage mode, where anyone can access it without verification.

Uploaded by

oncall01
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
36 views6 pages

Operation Instructions

The document provides instructions for setting up and using a fingerprint door lock, including how to: 1. Add batteries, register fingerprints for super master, master, and regular users, and enroll fingerprints. 2. Delete individual users by having a super master or master fingerprint verify the deletion. 3. Clear all fingerprints from the device using only the super master fingerprint. 4. Set the lock to either locked mode, where only fingerprints or keys can open it, or passage mode, where anyone can access it without verification.

Uploaded by

oncall01
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Operation Instruction Preparation

Place 4 AA batteries in compartment located beneath the rear panel.

Unlock by fingerprint

User Management
Add new fingerprints.
The first registered fingerprint is the super master fingerprint. The second and third fingerprints are master fingerprints. 4-99 fingerprints are user fingerprints.

Adding Super master

1. Press the Power Key

2.Press the + key within 5 seconds

3.The optical reader will beep & then flash blue

4. Verify your fingerprint.

5. Press ok. (If the front door LED flashes blue 3 times, Registration successful)

6. If the light flashes red,


Registration has failed.

Enroll the masters fingerprint

1. Press the Power key

2.Press the + key within 5 seconds

3. The optical reader will beep & then flash blue

4. Verify the super master fingerprint to get permission

5. The masters serial number will be displayed

6. Then press ok key

7. New user must place fingerprint on the reader

8. Place your fingerprint for a second time. The indicator will flash red & blue 3 times if successful.

Enroll the users fingerprints

1.Press the Power key

2.Press the + key within 5 seconds

3. The optical reader will beep & then flash blue

4. Place the fingerprint of super master or master to get permission

5. The users serial number will be displayed

6. Then press ok key.

7. New user must place 8. Place fingerprint for a fingerprint on the reader second time. Light will flash red & blue 3 times if successful.

Deleting a user

1.Press the Power key

2. Press the - key within 5 seconds

3. Place the fingerprint of the super master or the masters to get permission

4. The verification succeeds if the reader beeps once. The verification fails if the reader beeps three times.

5. Scroll using + & - keys until the users serial number is displayed.

6. Press the ok key to delete the user.

7. The user has been successfully deleted if the light flashes 3 times.

8. Repeat process to delete other users.

Clearing all users by super master finger

1. Press the Power key

2.Press c key to clear

3.Place the fingerprint of super master on the reader.

4. After a long beep, all the fingerprints are cleared.

Locked Mode & Passage Mode


Lock Mode: When the door is locked mode, it can be opened only

by fingerprint or key. Passage Mode: When the door is in passage mode, a c c e s s w i l l b e g r a n t e d t o anybody.

Locked Mode

Passage Mode

You might also like