Dell E6410 Error Codes
Dell E6410 Error Codes
FLASH-ON-ON
system board. 3. Replace the processor. 1. Reseat the display cable. 2. Replace the display panel. 3. Replace the video card/system board. 1. Install compatible memory modules. 2. If two modules are installed remove one and test. Try the other module in the same slot and test. Test the other slot with both modules. 3. Replace the memory. 4. Replace the system board. 1. Reseat the memory. 2. If two modules are installed remove one and test. Try the other module in the same slot and test. Test the other slot with both modules. 3. Replace the
ON-FLASH-ON
memory. 4. Replace the system board. 1. Reseat the modem. 2. Replace the modem. 3. Replace the system board.
1. Reseat the device. 2. Replace the device. 3. Replace the system board. 1. Reseat the hard drive and optical drive. 2. Test the computer with just the hard drive and just the optical drive. 3. Replace the device that is causing the failure. 4. Replace the system board.