RD-Type PB-Type

. Heavy Duty Heatsink . Alluminum Logo Badge

. Dia-cut Alluminum Badge . Heavy Duty Heatsink
. Computer Engraved Logo

HK-Type

. Top Cover with Grille for High Venturation

. Semi See-Through with Grille
. Engraved Logo Badge
. LCD Display for Thermal,Voltage & Output Level

KOTECH Industries Co., Ltd. Tel. 82-32-3232-635, Fax. 3232-636

( Manufacturer Exporter ) E-mail : [email protected]
 RS-Type

. Two Colors Heatsink

. Alluminum End-Caps
. Epoxy Logo Badge
. Heavy Duty Heatsink

BM-Type

.Die-casted End-Caps
.Decoration Grille Bars
.Skelleton Badge

KOTECH Industries Co., Ltd. Tel. 82-32-3232-635, Fax. 3232-636

( Manufacturer Exporter ) E-mail : [email protected]
 CLASS-D MONO BLOCK POWER AMPLIFIER
FEATURES & SPECIFICATION:
◆FULL MOSFET 1 OHM STABLE AMPILIER ◆S/N RATIO: 90dB at 45Hz
◆FULL PWM POWER SUPPLY ◆THD at 4 OHMS: LESS THAN 0.05% at RATED POWER
◆QUITE FAN COOLING SYSTEM ◆THD at 2 OHMS: LESS THAN 0.1%
◆DOUBLE SIDED BLACK EPOXY PCB ◆CHANNEL SEPARATION: 60dB
◆HIGH QUALITY POWER & PRETECTION LEDs ◆FREQUENCY RESPONSE: 20Hz ~ 400Hz
◆THERMAL, SHORT, OVERLOAD PROTECTION ◆INPUT IMPEDANCE: 10K OHMS
◆VARIABLE LOW-PASS CROSSOVER: 20 ~ ◆INPUT VOLTAGE RANGE: 200mV ~ 6 V
400Hz
◆VARIABLE SUBSONIC FILETER: 20 ~ 50Hz ◆CHROME PLATED BLOCK TERMINALS
◆VARIABLE BASS BOOST: 0 ~ 18dB at 45Hz ◆PLATINUM PLATED SCREW TYPE RCA

REAL 1-OHM STABLE CLASS-D POWER AMPLIFIER

DAISY CHAIN
(IN CASE OF TAKING SET BRIDGE, ITS POWER RATING WILL BE ABOUT 2.5 TIMES THAN 1 OHM OUTPUT)

POWER RATING
Model No. RMS @4-ohm RMS @2-ohm RMS @ 1-ohm DAISY CHAIN @2-ohm
D-700M 250W x 1Ch 450W x 1Ch 700W x 1Ch 1500W x 1Ch
D-900M 350W x 1Ch 620W x 1Ch 900W x 1Ch 1900W x 1Ch
D-1500M 500W x 1Ch 900W x 1Ch 1350W x 1Ch 2800W x 1Ch
D-3000M 1200W x 1Ch 2200W x 1Ch 3200W x 1Ch 6500W x 1Ch
D-5000M 2000W x 1Ch 3500W x 1Ch 5000W x 1Ch 11000W x 1Ch
D-11KM 8000W x 1Ch 11000W x 1Ch - -

KOTECH Industries Co., Ltd.

Tel. 82-32-3232-635, Fax. 3232-636
E-mail : [email protected]
W x H x L(mm)
267 x 65 x 280
267 x 65 x 280
267 x 65 x 360
267 x 65 x 530
267 x 65 x 660

KOTECH Industries Co., Ltd.

Tel. 82-32-3232-635, Fax. 3232-636
E-mail : [email protected]
 HI-CURRENT 1 OHM Full Range POWER AMPLIFIER

FEATURES & SPECIFICATION:

◆FULL MOSFET 1 OHM STABLE AMPLIFIER ◆S/N RATIO: 95dB
◆FULL PWM POWER SUPPLY ◆THD at 4 OHMS: LESS THAN 0.05%
◆QUIET FAN COOLING SYSTEM ◆THD at 2 OHMS: LESS THAN 0.1%
◆FR4 DOUBLE SIDED PCB ◆CHANNEL SEPARATION: 60dB
◆THERMAL, SHORT, OVERLOAD ◆FREQUENCY RESPONSE: 20Hz ~ 30KHz
PROTECTION
◆VARIABLE INPUT GAIN CONTROL ◆INPUT IMPEDANCE: 10K OHMS
◆VARIABLE HIGH-PASS CROSSOVER ◆HIGH QUALITY POWER & PROTECTION LEDs
◆VARIABLE LOW-PASS CROSSOVER ◆PLATINUM PLATED BLOCK TERMINALS
◆VARIABLE BASS BOOST: 0 ~ 18dB ◆PLATINUM PLATED SCREW TYPE RCA
◆VARIABLE SUBSONIC FILTER ◆REMOTE GAIN CONTROL
◆PRE-AMP LINE OUT FOR MULTI HOOK-UP

REAL 1-OHM STABLE CLASS-AB POWER AMPLIFIER

* RMS Power @ 1 Ohm : 300% of the RMS @ 4 Ohm
* Bridged Power @ 4 Ohm : 400% of the RMS @ 4 Ohm

POWER RATING & Dimensions

RMS @4-ohm PCB Size (W x L mm) HX-Type CD -Type UL-Type

50W x 2 Ch 212 x 260 315x68x266 310x65x320

50W x 4 Ch 212 x 390 315x68x396 310x65x450
130W x 2 Ch 212 x 370 315x68x376 x430
230W x 1 Ch 212 x 300 x306 x360
300W x 1 Ch 212 x 370 x376 x430
500W x 1 Ch 212 x 400 x406 x460
300W x 2 Ch 212 x 585 x595 x650
400W x 2 Ch 212 x 679 x695 x740

KOTECH Industries Co., Ltd.

Tel. 82-32-3232-635, fax. 3232-636
E-mail : [email protected]
UL-Type

320x67x360
x490
x470
x400
x470
x500
x685
x780

KOTECH Industries Co., Ltd.

Tel. 82-32-3232-635, fax. 3232-636
E-mail : [email protected]
 MP-Type
HX-Type UL-Type

. Top Cover with Grille for High Venturation .Stainless Steel Finish Top Cover . Two-boby Alluminum Heat sink
. Semi See-Through with Grille .Plastic Molded Panels . See-Through with Plexiglas
. Engraved Logo Badge .Dia-cut Alluminum Logo
. LCD Display for Thermal,Voltage & Output Level

CD -Type VS-Type

. Dual VU-Meters .Die-casted Alluminum End Caps

. Engraved & Illuminating Logo .Stainless Steel Finished Top Plate
. Alluminum End Caps
. Carrying Handles

KOTECH Industries Co., Ltd.

Tel. 82-32-3232-635, fax. 3232-636
E-mail : [email protected]
 ype

minum Heat sink

with Plexiglas

ype

minum End Caps

nished Top Plate

KOTECH Industries Co., Ltd.

Tel. 82-32-3232-635, fax. 3232-636
E-mail : [email protected]
 AB CLASS 1-OHM CAPABLE POWER AMPLIFIER ( I )

FEATURES & SPECIFICATION:

◆ MOSFET 1 OHM CAPABLE ◆Variable Input Gain Control
◆FULL PWM POWER SUPPLY ◆S/N RATIO: 90dB
◆QUIET FAN COOLING SYSTEM ◆THD at 4 OHMS: LESS THAN 0.05%
◆FR1 DOUBLE SIDED PCB ◆THD at 2 OHMS: LESS THAN 0.1%
◆HIGH QUALITY POWER & PROTECTION ◆CHANNEL SEPARATION: 60dB
LEDs
◆THERMAL, SHORT, OVERLOAD PROTECTION ◆FREQUENCY RESPONSE: 20Hz ~ 30KHz
◆VARIABLE HIGH-PASS CROSSOVER ◆INPUT IMPEDANCE: 10K OHMS
◆VARIABLE LOW-PASS CROSSOVER ◆PLATINUM PLATED BLOCK TERMINAL
◆VARIABLE BASS BOOST: 0 ~ 18dB ◆PLATINUM PLATED SCREW TYPE RCA
◆PREAMP LINE OUT FOR MULTI-
◆REMOTE GAIN CONTROL
HOOKUP
◆VARIABLE SUBSONIC FILTER (MONO AMP ONLY)

POWER RATING & DIMENSIONS

RMS Power @4-ohms CD-Type UL-Type VS-Type MP-Type
300W x 1 Ch 310 x 65 x 350 320x50x390 275x73x420 277x65x310
50W x 2 Ch x210 x250 x280 x170
75W x 2 Ch x260 x300 x330 x220
100W x 2 Ch x300 x340 x370 x260
130W x 2 Ch x350 x390 x420 x310
200W x 2 Ch x550 x590 x620 x510
50W x 4Ch x380 x420 x450 x340
75W x 4Ch x400 x440 x470 x360
100W x 4Ch x470 x510 x540 x430
60Wx4 + 120Wx1 x470 x510 x540 x430
 AB CLASS 1-OHM CAPABLE POWER AMPLIFIER ( I )
CD-Type
VS-Type

.Die-casted Alluminum End Caps

. Carrying Handles .Stainless Steel Finich Top Plate
. Engraved & Illuminating Logo
. Alluminum End Caps
. Dual VU-Meters
(Except 50Wx2Ch)

UL-Type MP-Type

.Two-body Alluminum Heatsink

. See-through with Plexiglas .Stainless Steel Finish Top Cover
.Dia-cut Finish .Plastic Molded Panels
.Over-sized Top Heatsink & Side-Caps .Dia-cut Alluminum Logo

1-OHM CAPABLE AMP

CAPABLE AMP
 AB CLASS 1-OHM CAPABLE POWER AMPLIFIER ( II )

FEATURES & SPECIFICATION:

◆ MOSFET 1 OHM CAPABLE ◆Variable Input Gain Control
◆FULL PWM POWER SUPPLY ◆S/N RATIO: 90dB
◆QUIET FAN COOLING SYSTEM ◆THD at 4 OHMS: LESS THAN 0.05%
◆FR1 DOUBLE SIDED PCB ◆THD at 2 OHMS: LESS THAN 0.1%
◆HIGH QUALITY POWER & ◆CHANNEL SEPARATION: 60dB
PROTECTION LEDs OVERLOAD PROTECTION
◆THERMAL, SHORT, ◆FREQUENCY RESPONSE: 20Hz ~ 30KHz
◆VARIABLE HIGH-PASS CROSSOVER ◆INPUT IMPEDANCE: 10K OHMS
◆VARIABLE LOW-PASS CROSSOVER ◆PLATINUM PLATED BLOCK TERMINAL
◆VARIABLE BASS BOOST: 0 ~ 18dB ◆PLATINUM PLATED SCREW TYPE RCA
◆PREAMP LINE OUT FOR MULTI-HOOKUP ◆REMOTE GAIN CONTROL
◆VARIABLE SUBSONIC FILTER (MONO AMP ONLY)

POWER RATING & Dimensions

RMS Power @4-ohm HK-Type CA-Type MJ-Type BM-Type MK-Type PR-Type
150W x 1 Ch 313 x 68 x 230 275x66x230 255 x 54 x 230 253x78x360 255 x 54 x 230 255 x 54 x 230
250W x 1 Ch 315 x 68 x 300 275x66x300 255 x 54 x 300 x430 255 x 54 x 300 255 x 54 x 300
500W x 1 Ch 315 x 68 x 400 275x66x400 255 x 54 x 400 x530 255 x 54 x 400 255 x 54 x 400
50W x 2 Ch 315 x 68 x 160 x170 255 x 54 x 160 x300 255 x 54 x 160 255 x 54 x 160
70W x 2 Ch 315 x 68 x 230 x230 255 x 54 x 230 x360 255 x 54 x 230 255 x 54 x 230
90W x 2 Ch 315 x 68 x 270 x280 255 x 54 x 270 x410 255 x 54 x 270 255 x 54 x 270
125W x 2 Ch 315 x 68 x 330 x330 255 x 54 x 330 x460 255 x 54 x 330 255 x 54 x 330
200W x 2 Ch 315 x 68 x 500 x500 255 x 54 x 500 x630 255 x 54 x 500 255 x 54 x 500
50W x 4Ch 315 x 68 x 330 x330 255 x 54 x 330 x460 255 x 54 x 330 255 x 54 x 330
70W x 4Ch 315 x 68 x 350 x350 255 x 54 x 350 x480 255 x 54 x 350 255 x 54 x 350
100W x 4Ch 315 x 68 x 420 x420 255 x 54 x 420 x550 255 x 54 x 420 255 x 54 x 420
60Wx4 + 120Wx1 315 x 68 x 420 x420 255 x 54 x 420 x550 255 x 54 x 420 255 x 54 x 420
 AB CLASS 1-OHM CAPABLE POWER AMPLIFIER ( II )
HK-Type CA-Type MJ-Type

. Shinny Alluminum Top Cover .Engraved Logo on Plexy Glass

. Top Cover with Grille for High Venturation
.Chrome Plated Bars
. Semi See-Through with Grille
. Engraved Logo Badge

BM-Type MK-Type PR-Type

.Die-casted End-Caps .Classical & Optimized Design for High Efficiency .Classical & Optimized Design for High Efficiency
.Decoration w/Grille Bars .Eliminated Unneccessary Cosmetic .Eliminated Unneccessary Cosmetic
. Heavy Duty Alluminum Heatsink . Heavy Duty Alluminum Heatsink
ype

on Plexy Glass
ated Bars

ype
esign for High Efficiency
essary Cosmetic
minum Heatsink
TA-SERIES

AB CLASS 1-OHM CAPABLE POWER AMPLIFIER

TA-H Type TA-P Type

FEATURES & SPECIFICATION:

◆ MOSFET 2 OHMS STABLE AMPILIER ◆THD at 4 OHMS: LESS THAN 0.05% at RATED
◆ PWM POWER SUPPLY POWER
◆THD at 2 OHMS: LESS THAN 0.1%
◆HIGH QUALITY POWER & PROTECTION LEDs ◆CHANNEL SEPARATION: 60dB
◆MULTI-PROTECTION CIRCUITRY (THEMAL, SHORT, ◆FREQUENCY RESPONSE: 20Hz ~ 40KHz
OVERLOAD, DC OUTPUT)
◆ VARIABLE HIGH-PASS CROSSOVER: 10Hz ~1.5KHz ◆INPUT IMPEDANCE: 10K OHMS
◆VARIABLE LOW-PASS CROSSOVER: 40Hz ~ 500Hz ◆INPUT VOLTAGE RANGE: 200mV ~ 6 V
◆VARIABLE BASS BOOST: 0 ~ 18dB at 45Hz ◆CHROME PLATED BLOCK TERMINALS
◆EXTERNAL BASS REMOTE CONTROLLER(OPTION) ◆CHROME PLATED SCREW TYPE RCA
◆S/N RATIO: 90dB ◆FR4 Double sided PCB ( TA-1400M & HB-5.1CH)

POWER RATING
Model No. RMS Power @4-ohms RMS Power @2-ohms
TA-602 60W x 2Ch 90W x 2Ch
TA-604 60W x 4Ch 90W x 4Ch
TA-1502 160W x 2Ch 230W x 2Ch
TA-854 85W x 4Ch 110W x 4Ch
TA-1204 120W x 4Ch 150W x 4Ch
TA-1400M 500W x 1Ch 900W x 1Ch
HB-5.1CH 60W x 5 + 350W 90W x 4Ch + 600W
DIMENSION & F.O.B KOREA
Model No. Bridged Power @4-ohms FOB Korea
TA-602 150W x 1Ch
TA-604 150W x 2Ch
TA-1502 460W x 1Ch
TA-854 210W x 2Ch
TA-1204 250W x 2Ch
TA-1400M 1400W x 1Ch(at 1Ohm)
HB-5.1CH 60W x 5 + 900W(1-ohm)
 AMPLIFIER

TA-P Type

LESS THAN 0.05% at RATED

LESS THAN 0.1%
RATION: 60dB
SPONSE: 20Hz ~ 40KHz

CE: 10K OHMS

RANGE: 200mV ~ 6 V
D BLOCK TERMINALS
D SCREW TYPE RCA
d PCB ( TA-1400M & HB-5.1CH)

Bridged Power @4-ohms

150W x 1Ch
150W x 2Ch
460W x 1Ch
210W x 2Ch
250W x 2Ch
1400W x 1Ch(at 1Ohm)
Hybrid AB + D Class

W x H x L(mm)
267 x 55 x 200
267 x 55 x 330
267 x 55 x 350
267 x 55 x 350
267 x 55 x 400
267 x 55 x 400
267 x 55 x 530
CHROME SERIES

AB CLASS CAR POWER AMPLIFIER

FEATURES & SPECIFICATION
◆REAL CHROME PLATED TOP COVER ◆S/N RATIO: 80dB
◆QUIET FAN COOLING SYSTEM
◆POWER & PROTECTION LEDs ◆THD at 4 OHMS: LESS THAN 0.5%
◆2-OHM STABLE
◆THERMAL, SHORT, OVERLOAD PROTECTION ◆CHANNEL SEPARATION: 60dB
◆VARIALBE BASS BOOST: 0dB ~ 18dB at 45Hz ◆FREQUENCY RESPONSE: 20Hz ~ 30KHz
◆ VARIABLE HIGH-PASS CROSSOVER: 50Hz ~ 1KHz ◆INPUT IMPEDANCE: 10K OHMS
◆VARIABLE LOW-PASS CROSSOVER: 30Hz ~ 250Hz ◆INPUT VOLTAGE RANGE: 200mV ~ 4 V

POWER RATING & F.O.B KOREA

Model No. RMS Power @4-ohms FOB Korea
602 60W x 2 Ch
802 80W x 2 Ch
1202 120W x 2 Ch
504 50W x 4Ch
654 65W x 4Ch
804 80W x 4Ch

KA-Type KC-Type

TH-Type KH-Type
LIFIER

ESS THAN 0.5%

ATION: 60dB
PONSE: 20Hz ~ 30KHz
E: 10K OHMS
RANGE: 200mV ~ 4 V

WxHxL(mm)
280 x 60 x 200
280 x 60 x 250
280 x 60 x 310
280 x 60 x 250
280 x 60 x 310
280 x 60 x 370

KC-Type

KH-Type
MIRROR SERIES

AB CLASS CAR POWER AMPLIFIER

FEATURES & SPECIFICATION

◆MIRROR PLATES ON END PANEL & HEATSINK TOP ◆S/N RATIO: 90dB

◆POWER & PRETECTION LEDs ◆THD at 4 OHMS: LESS THAN 0.05%

◆THERMAL, SHORT, OVERLOAD PROTECTION ◆CHANNEL SEPARATION: 60dB

◆VARIALBE BASS BOOST: 0dB ~ 18dB at 45Hz ◆FREQUENCY RESPONSE: 20Hz ~ 30KHz

◆ VARIABLE HIGH-PASS CROSSOVER: 50Hz ~ 2KHz ◆INPUT IMPEDANCE: 10K OHMS

◆VARIABLE LOW-PASS CROSSOVER: 30Hz ~ 300Hz ◆INPUT GAIN CONTROL: 200mV ~ 4 V

◆VARIABLE SUBSONIC FILTER: 10Hz ~ 120Hz ◆LOGO ILLUMINATION

POWER RATING & F.O.B KOREA

Model No. RMS Power @4-ohms FOB Korea
AMP-602 60W x 2Ch
AMP-802 80W x 2Ch
AMP-604 60W x 4Ch
AMP-804 80W x 4Ch
LIFIER

ESS THAN 0.05%

ATION: 60dB

PONSE: 20Hz ~ 30KHz

E: 10K OHMS

TROL: 200mV ~ 4 V

ION

WxHxL(mm)
220 x 58 x 300
220 x 58 x 330
220 x 58 x 330
220 x 58 x 400
ULM-SEREIS
AB CLASS CAR POWER AMPLIFIER

FEATURES & SPECIFICATION

◆ CNC MACHINED & MOULD TYPE BLOCK ◆S/N RATIO: 90dB
TEMINALS
◆ MOSFET 2 OHMS STABLE AMPILIER ◆THD at 4 OHMS: LESS THAN 0.05%
◆QUITE FAN COOLING SYSTEM ◆THD at 2 OHMS: LESS THAN 0.1%
◆POWER & PRETECTION LEDs ◆CHANNEL SEPARATION: 60dB
◆ VARIABLE HIGH-PASS CROSSOVER: 40~250Hz ◆FREQUENCY RESPONSE: 20Hz ~ 30KHz
◆VARIABLE LOW-PASS CROSSOVER: 40 ~ 250Hz ◆INPUT IMPEDANCE: 10K OHMS
◆REMOTE BASS CONTROLLER (Option) ◆INPUT GAIN CONTROL: 200mV ~ 5 V
◆RCA LINE OUTS FOR MULTI HOOK-UP ◆HIGH & LOW INPUT AVAILABLE

POWER RATING
Model No. RMS Power @4-ohms RMS Power @2-ohms
UL1600M 150W x 1 Ch 200W x 1 Ch
UL2200M 50W x 2 Ch 70W x 2 Ch
UL2600M 120W x 2 Ch 160W x 2 Ch
UL4400M 50W x 4 Ch 70W x 4 Ch
DIMENSION & F.O.B KOREA
Model No. RMS Power @4-ohms FOB Korea
UL1600M 150W x 1 Ch
UL2200M 50W x 2 Ch
UL2600M 120W x 2 Ch
UL4400M 50W x 4 Ch
MPLIFIER

: LESS THAN 0.05%

: LESS THAN 0.1%
ARATION: 60dB
ESPONSE: 20Hz ~ 30KHz
NCE: 10K OHMS
ONTROL: 200mV ~ 5 V
PUT AVAILABLE

Bridged @4-ohms
360W x 2 Ch
120W x 2 Ch
300W x 1 Ch
120W x 2 Ch

W x H x L(mm)
252x58x235
252x58x205
252x58x305
252x58x275
MI SERIES

AB CLASS CAR POWER AMPLIFIER

FEATURES & SPECIFICATION

◆NICKEL PLATED CONNECTORS ◆S/N RATIO: 90dB

◆POWER & PROTECTION LEDs ◆THD at 4 OHMS: LESS THAN 0.05%

◆THERMAL, SHORT, OVERLOAD PROTECTION ◆THD at 2 OHMS: LESS THAN 0.1%

◆REMOTE BASS CONTROLLER(OPTION) ◆CHANNEL SEPARATION: 60dB

◆VARIALBE BASS BOOST: 0 ~ 18dB ◆FREQUENCY RESPONSE: 20Hz ~ 30KHz

◆ VARIABLE HIGH-PASS CROSSOVER: 40~250Hz ◆INPUT IMPEDANCE: 10K OHMS

◆VARIABLE LOW-PASS CROSSOVER: 40 ~ 250Hz ◆INPUT VOLTAGE RANGE: 200mV ~ 4 V

POWER RATING
Model No. RMS Power @4-ohms RMS Power @2-ohms
M502i 50W x 2 Ch 80W x 2 Ch
M504i 60W x 4 Ch 95W x 4 Ch
M752i 75W x 2 Ch 120W x 2 Ch
M754i 75W x 4Ch 120W x 4Ch
M1002i 100W x 2Ch 160W x 2Ch
M2001i 200W x 1Ch 320W x 1Ch
DIMENSION & F.O.B KOREA
Model No. RMS Power @4-ohms FOB Korea
M502i 50W x 2 Ch
M504i 60W x 4 Ch
M752i 75W x 2 Ch
M754i 75W x 4Ch
M1002i 100W x 2Ch
M2001i 200W x 1Ch
LIFIER

ESS THAN 0.05%

ESS THAN 0.1%

ATION: 60dB

PONSE: 20Hz ~ 30KHz

E: 10K OHMS

RANGE: 200mV ~ 4 V

Bridged @4-ohms
125W x 1 Ch
150W x 2 Ch
190W x 1 Ch
190W x 2Ch
250W x 1Ch
NA

WxHxL(mm)
272 x 49 x 200
300 x 49 x 200
230 x 49 x 200
350 x 49 x 200
300 x 49 x 200
300 x 49 x 200