1.design of metal structures by Mukhonov 2.http://www.engineering-international.com/ 3.

Engineering and Transport Properties of the Interfacial Transition Zone in Cem entitious Composites By M. G. Alexander, International Union of Testing and Research Laboratories for Materials and Structures Contributor M. G. Alexander 4.Steel Designers' Manual' BY CONSTRADO 5.http://pwd.delhigovt.nic.in/pims/right_to_info/handbook.pdf 6.http://www.flyashconcrete.in/default.aspx 7.http://www.sciam.com/article.cfm?id=coal-ash-is-more-radioactive-than-nuclearwaste 8. Dubas, P., and Gehri, E., ed. Behaviour and Design of Steel Plated Structures , ECCS, Publication No. 44, ETH Hnggerberg, Zrich, 1986. 9. Narayanan, R., ed. Plated Structures: Stability and Strength, Elsevier Applie d Science Publishers, London, 1983. 10. Paik, J.K and Thayamballi, A.K., Ultimate Limit State Design of Steel Plated Structures, John Wiley & Sons Ltd., England, 2003, 544pp. 11.For the design of Chequered plates, Steel Designers Manual by Timoshenko & Kr ieger. 12.Federal Aviation Administration (FAA), U.S. Department of Transportation, has several advisory circulars available free of charge for heliport design. Check the www.FAA.gov site. 13.For pile cap analysis see: http://www.fseas.info/sipilec.htm 14.STM method for pile caps may result in more flexural reinforcement than what one would have obtained by using beam theory. However, no shear reinforcement wi ll be required. STM method requires reinforcement to be distributed in bands. No minal reinforcement is required to be provided in other areas for serviceability considerations. Please refer Nori, V.V. and M.S. Tharval's paper in ICJ,April 2 007 issue- can be freely downloaded from: http://www.icjonline.com/views/POV_Nor i_Apr2007.pdf 15. P.C. Varghese, Foundation Engineering,PHI,2005,pp.271-275 16.Swami Saran, Analysis and Design of Substructures-Limit State Design, Second Ed., Oxford & IBH, 2006, pp.387-392. 17.Hetyeni's book on elastic foundations 18.CONCRETE BEAMS WITH OPENINGS ANALYSIS AND DESIGN by M.A.Mansur and Kiang-Hwee Tan. You can order it from Amazon.com in the following link: http://www.amazon.com/Concrete-Beams-Openings-Directions-Engineering/dp/08493743 59 19.Neville on Concrete- An Examination of Issues on Concrete Practice" second ed ition, Booksurge LLC,2006, ISBN 1-4196-5207-9,

20.CONCRETE BEAMS WITH OPENINGS ANALYSIS AND DESIGN by M.A.Mansur and Kiang-Hwee Tan. http://www.mediafire.com/?bi0drijjdgz 21..SP-34 IS CODE 22.ACI detailing manual-04. 23.Manual of standard practice-by CRSI,USA 24. Standard method of Detailing structural concrete by the Institute of Structural engineers,UK. 25.Reinforced concrete Detailers manual-By Brian W.Boughton. 26.(to create document, spreadsheet, presentation, database, drawing, and with capability to edit .pdf file): http://www.openoffice.org/ 27.2D drafting software QCAD (look for community edition, which gives you source code): http://www.qcad.org/qcad_downloads.html 28.GIS software: http://grass.itc.it/ 29.RCC Elements: ARCE; http://arce.sarovar.org/ 30.FEM software CodeAster: http://www.code-aster.org/V2/UPLOAD/DOC/Presentation/plaq_V7_GB.pdf 31. book by (late) Padma Awarde Dr. Larry Baker 32.Explosion-Resistant Buildings by M.Y.H. Bangash and T. Bangash,Springer Verla g; 2006, 450pp. $369!! 33.Design of Blast Resistant Buildings in Petrochemical Facilities by American Society Of Civil Engineers, 1997, 280pp, $61. 34.REINFORCED CONCRETE STRUCTURAL ELEMENTS Behaviour, Analysis and Design By P P urushothaman.pdf 35.BLAST RESISTANT DESIGN UFC _3_340_02 TM 5-1300 US army corps of engineer-protective design centre technical reportACI 318, Chap ter 21 and thethe seismic detailing provisions are applied to provide the necessa ry ductile response in case of blast loadings. 36.Seismic Detailing of Concrete Buildings Item Code: SP382 Date: 2007 Fanella, D. 37.http://www.structuremag.org/ 38.DESIGN TABLES FOR FOLDED PLATES. - by UH Varyani 39.MANUAL FOR LIMIT STATE DESIGN IN REINFORCED CONCRETE MEMBERS. - by UH Varyani 40.STRUCTURAL DESIGN OF MULTISTORIED BUILDINGS. - by UH Varyani 41.BIAXIAL BENDING OF REINFORCED CONCRETE MEMBERS. - by UH Varyani 38. http://www.structures-india.com

39. Applied Elasticity, 1925 by Stephen.P.Timoshenko 40. Vibration Problems in Engineering, 1st Ed. 1928, 2nd Ed. 1937, 3rd Ed. 1955 (with D. H. Young) by Stephen.P.Timoshenko 41. Strength of Materials, Part I, Elementary Theory and Problems, 1st Ed. 1930, by Stephen.P.Timoshenko 42. Strength of Materials, Part II, Advanced Theory and Problems, 1st Ed. 1930, by Stephen.P.Timoshenko 43. Theory of Elasticity , 1st Ed. 1934, by Stephen.P.Timoshenko 44. Elements of Strength of Materials, 1st Ed. 1935, by Stephen.P.Timoshenko 45. Theory of Elastic Stability, 1st Ed. 1936, by Stephen.P.Timoshenko 46. Engineering Mechanics, 1st Ed. 1937, by Stephen.P.Timoshenko 47. Theory of Plates and Shells , 1st Ed. 1940, by Stephen.P.Timoshenko 48. Theory of Structures, 1st Ed. 1945, by Stephen.P.Timoshenko 49. Mechanics of Materials , 1972 by Stephen.P.Timoshenko 50. History of The Strength of Materials, 1953 by Stephen.P.Timoshenko 51. Engineering Education in Russia, 1959 by Stephen.P.Timoshenko 52. As I Remember, 1968, by Stephen.P.Timoshenko 53. Advanced Dynamics, 1948 by Stephen.P.Timoshenko 54. Collected Papers by Stephen.P.Timoshenko 55. DESIGN HANDBOOK BY TATA STEEL 56. 57. DESIGN AND CONSTRUCTION FAILURES-LESSONS LEARNED FROM FORENSIC INVESTIGATION S By DOV KAMINETZKY. PUBLISHED BY GALGOTIA PUBLISHING PVT.LTD. 58. concretecentre.com 59. Construction Failures, 2nd Edition by Jacob Feld , Kenneth L. Carper , Wiley Interscience, 2nd Edition, 528pp,1996(I also have a small booklet on Foundation Failures by Jacob Feld). 60.Forensic Engineering: Learning from Failures by Kenneth L. Carper ,Amer Socie ty of Civil Engineers(ASCE), 1986,98pp, 61. Building Failures: Case Studies in Construction and Design by Thomas H. McKa ig, McGraw-Hill Education, McGraw-Hill Education,1962,261pp 62. Failures in Civil Engineering: Structural, Foundation, and Geoenvironmental Case Studies (Paperback) by J. David Frost and Robin Shepherd, ASCE,1995,92pp[/u rl] 63. Understanding Building Failures by Douglas/Ransom,Taylor & Francis,Third edi tion,2007,332pp 64. CROSS News letter published by Dr.Alastair Soane of Structural Engineer [U.K ] 65. LEARNING FROM FAILURES,Raikar bhavan, sector 17, Vashi,New Bombay-400703,198 7. 66. ' HAND BOOK FOR DESIGN OF SLABS ' BY YIELD LINE AND STRIP METHOD by Dr S.N. Shukla , 67. 4th edition of the Masonry Design Manual has been recently released by the Masonry Institute of America. The material presented is a valuable tool for nonengineering disciplines, such as architects and contractors, also.This book is c onsistent with the provisions of the 2006 International Building Code, the 2005 Building Code Requirements for Masonry Structures (ACI 530/ASCE 5/TMS 402) and t he 2005 Specification for Masonry Structures (ACI 530.1/ASCE 6/TMS 602). It cost s $99.95. 68. Svetlana Bryzev, Masonry structures, NICEE 69. A Brief History of Time, Prof. Stephen Hawkins

70.Elementary Behaviour of Composite Steel & Concrete Structural Members by Oehl ers D.J., and Bradford, M.A., Butterwirth Heinemann, 1999 71. Joints in steel construction - The British constructional steel work associa tion ltd, Steel Construction Institute. 72. Deformation of Concrete Structures by Dan E. Branson ,McGraw-Hill Inc., N.Y . 576pp, 1977. Branson's method is used in ACI 318. Books for Silos and Hoppers design 73) There is a chapter on silos and bunkers in the book HANDBOOK OF CONCRETE ENG INEERING BY MARK FINTEL-CBS Publishers. 74) http://www.esdep.org/members/master/wg15c/t0200.htm 75) Storage structures by K.Raja gopalan (http://www.pci.org/pdf/publications/jo urnal/1990/January-February/JL-90-JANUARY-FEBRUARY-16.pdf) 76) Advanced Structural Design II by J.D.Buch (It covers pyramidal hoppers) 77) Design of Cement Plant Structures by J.D.Buch 77) silo-failures-case_histories_and_lessons_learnt-Carson-2000.pdf 77a)The Theory and Practical Design of Bunkers", paper by F.W.Lambert. (Steel bi ns) 77b) Design of Welded Structures, by Blodgett; Section 6.5, "Tanks, Bins and Hop pers". (Steel bins) 77c) Design and Construction of Silos and Bunkers, Sargis S. Safarian, Ernest C. Harris 77d) Economic Guide to the Design of Circular Metal Silos - by Michael J. Rotter 77e) Circular Storage Tanks And Silos by Amin Ghali 77f) Design of steel bins for storage of bulk solids By Edwin Henry Gaylord, Cha rles N. Gaylord 78. Vibrations of soils and foundationsBy: F E Richart, John R Hall, R D Woods P ublisher: Englewood Cliffs, N.J., Prentice-Hall [1970] ISBN: 0139417168 97801394 17160 79. Dynamics of bases and foundationsBy: D D Barkan Hill [1962] Publisher: New York, McGraw-

Design of Tubular structures 80. Jarmai,K., and Farkas, J., Eds., Mechanics and Design of Tubular Structures, Springer Verlag, 1999, 397pp.(See Chapter 3- Packer,J.A., Behaviour and Design of Bolted and welded connections) 81. Packer, J.A. and Henderson, J.E., 1997. "Hollow Structural Section Connectio ns and Trusses - A Design Guide", 2nd Edition, Canadian Institute of Steel Const ruction, Toronto, Canada, 447 pp. 82. Packer, J.A., Sherman, D.R. and Lecce, M., 2008. Design Guide for Hollow Str uctural Section Connections, American Institute of Steel Construction, Chicago, USA. 83. Packer, J.A., 2005. Design of HSS and Box Member Connections : Chapter K of Spec ification for Structural Steel Buildings, ANSI/AISC 360-05, American Institute o f Steel Construction, Chicago, USA. 84. Wardenier, J., Kurobane, Y., Packer, J.A., van der Vegte, G.J. and Zhao, X.L ., 2008. Design Guide for Circular Hollow Section (CHS) Joints under Predominant ly Static Loading , 2nd. Edition, CIDECT and Verlag T V Rheinland GmbH, Germany. 85. Zhao, X.-L., Herion, S., Packer, J.A., Puthli, R.S., Sedlacek, G., Wardenier , J., Weynand, K., van Wingerde, A.M. and Yeomans, N.F., 2001. "Design Guide for Circular and Rectangular Hollow Section Welded Joints under Fatigue Loading", C IDECT and Verlag T V Rheinland GmbH, Kln, Germany, 121 pp. 86. Packer, J.A. and Willibald, S., (eds.), 2006. Tubular Structures XI, Taylor & Francis, U.K. , 684 pp.

87. Design of reinforced concrete structures for earthquake resistance,published by,Indian society of structural engineers,Mumbai 88. Shell Foundations: Geometry, Analysis, Design and Construction, Alpha Scienc e International, Ltd, 2006, ISBN-13: 9781842653166 89. Prof. T.V.Galambos (Guide to stability Criteria for Metal Structures, 5th ed . Wiley) 90. The Manual of Below-Grade Waterproofing Systems[/url] by Justin Henshell, C. W. Griffin, Wiley, 1999, 304pp. 91. Space Structures: Principles and Practice, Vol.1&2, Multi-Science Publishing , UK by Dr. N. Subramanian 92. Cable Suspended Roofs, McGraw-Hill, 1978 by Prof. Prem Krishna of IITR 93. An Introduction to cable roof strucures, second edition, Thomas Telford, 199 8,285pp by Buchholdt, H.A. 94. Formwork for Concrete (ACI SP-4) Item Code: LT212, Date: 2005 , Hurd, M. K. (Known as Green Bible) Now in its 7th edition, revised in accordance with Guide to Formwork for Concret e (ACI 347R-04), Published by the American Concrete Institute. SHRI UH VARYANI'S LIST 95. Why buildings Stand up: The Strength of Architecture by late Prof. Mario Sal vadori 96. Why Buildings Fall Down: How Structures Fail by late Prof. Mario Salvadori ( coauthored with Er Matthys Levy) 97. Structural Design in Architecture by Salvadori and Levy, 98. High Rise Building Structures by W.Scheuller,1977 contains a number of wonde rful sketches. It may not be available now. But he has written another book "Des ign of Building Structures" Prentice Hall, 1995, which may be available. 99. Wang and Salmon is the book on RC design, now under 7th edition, by Wiley. T the book by Wight and MacGregor to be more interesting. both are very big books running to more than 1000 pages. 100. Beton Kalendar is in German and is published every year on special topics. It may not be freely available in India. 101. Structure in Architecture,which explains behaviour of structures by beautiful sketches.It is companion volume of the above. 102. Handbook of Concrete Engineering,First Edition,1974 is a very good book.It is a complete book. 103. There is a rare book,Statically Indeterminate Structures,by J.R.Benjamin.It gives material on shear walls. 104. Proceedings of Symposium on Tall Buildings,University of Southampton,1966 g ives many useful papers on shear wall structures. 105. On reinforced concrete design,two volumes by Jain and Jaikrishna are very u seful.They are encyclopaediac in nature. Almost everything you need in design is available in these volumes. 106. Then,booksby Ferguson, 107. Faber and Mead, 108. B.P.Hughes

109. 110. 111. 112. 113. 114. 115. 116. 117. 118. 119. 120. 121.

On foundations,books by Teng , 14.Dunham and 15.Bowles are valuable. For shells and folded plates,books by Chatterjee Ramaswamy, Dunham (Advanced Reinforced Concrete ), Yitzhaki and Manual No.31 of ASCE SERC's Handbook on Working Stress Design, SERC'sHandbook on Ultimate Strength Design, Steel Designers' Manual, Handbook byGhanekar and Jain Handbook by Shaker El-Behairy and Handbook by Reynolds and Steedman. DYNAMICS IN CIVIL ENGINEERING (VOL-1 TO IV) BY A.MAJOR