Scribd
Upload
2K views4 pages

Siemens Parameter List

This document contains configuration parameters for a CNC machine including parameters for the general machine data, channel data, individual axis data for the X, Z, and spindle axes. It defines values for items like cycle times, axis positions, limits, control gains, encoder settings, and more. The document provides detailed technical configuration of the machine operation and components.

Uploaded by

S.Dharanipathy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
2K views4 pages

Siemens Parameter List

This document contains configuration parameters for a CNC machine including parameters for the general machine data, channel data, individual axis data for the X, Z, and spindle axes. It defines values for items like cycle times, axis positions, limits, control gains, encoder settings, and more. The document provides detailed technical configuration of the machine operation and components.

Uploaded by

S.Dharanipathy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

GENERAL MD

N10061 $MN_POSCTRL_CYCLE_TIME=0.003
N10070 $MN_IPO_SYSCLOCK_TIME_RATIO=12
N10071 $MN_IPO_CYCLE_TIME=0.018
N10075 $MN_PLC_CYCLE_TIME=0.018
N10136 $MN_DISPLAY_MODE_POSITION=1
N11240 $MN_PROFIBUS_SDB_NUMBER=3
N12000 $MN_OVR_AX_IS_GRAY_CODE=0
N12020 $MN_OVR_FEED_IS_GRAY_CODE=0
N12040 $MN_OVR_RAPID_IS_GRAY_CODE=0
N12060 $MN_OVR_SPIND_IS_GRAY_CODE=0
N13060 $MN_DRIVE_TELEGRAM_TYPE[4]=104
N13070 $MN_DRIVE_FUNCTION_MASK[4]=H8000
N13080 $MN_DRIVE_TYPE_DP[0]=1
N13080 $MN_DRIVE_TYPE_DP[1]=1
N13080 $MN_DRIVE_TYPE_DP[4]=2
N14510 $MN_USER_DATA_INT[0]=9000
N14510 $MN_USER_DATA_INT[1]=5
N14514 $MN_USER_DATA_FLOAT[2]=1
N14514 $MN_USER_DATA_FLOAT[3]=1
N18050 $MN_INFO_FREE_MEM_DYNAMIC=1041896
N18060 $MN_INFO_FREE_MEM_STATIC=299592
N18210 $MN_MM_USER_MEM_DYNAMIC=3380
N19100 $ON_NUM_AXES_IN_SYSTEM=5
N19110 $ON_NUM_IPO_AXES=4
N19130 $ON_NUM_ABS_INC_REFP_AXES=0
N19200 $ON_NUM_CHANNELS=1
N19220 $ON_NUM_MODE_GROUPS=1
N19270 $ON_PLC_USER_MEM_SIZE=3
N19280 $ON_PLC_C_USER_MEM_SIZE=0
N19300 $ON_COMP_MASK=H0
N19310 $ON_AXIS_FUNCTION_MASK=H8
N19320 $ON_TECHNO_FUNCTION_MASK=H0
N19330 $ON_IPO_FUNCTION_MASK=H0
N19334 $ON_SYSTEM_FUNCTION_MASK=H4
N19340 $ON_PROG_MASK=H0
N19400 $ON_FFW_MODE_MASK=H0
N19410 $ON_TRAFO_TYPE_MASK=H0
N19700 $ON_ELEC_TRANSFER=0
N19800 $ON_EXTERN_LANGUAGE=H1
N41110 $SN_JOG_SET_VELO=1000
N41200 $SN_JOG_SPIND_SET_VELO=500

CHANNEL MD

N20150 $MC_GCODE_RESET_VALUES[9]=2
N20150 $MC_GCODE_RESET_VALUES[12]=4
N20150 $MC_GCODE_RESET_VALUES[23]=2
N20154 $MC_EXTERN_GCODE_RESET_VALUES[5]=2
N20360 $MC_TOOL_PARAMETER_DEF_MASK=H1
N27880 $MC_PART_COUNTER=H3333
N27882 $MC_PART_COUNTER_MCODE[0]=30
N29000 $OC_LOOKAH_NUM_CHECKED_BLOCKS=35
N42460 $SC_MINFEED=60
N42500 $SC_SD_MAX_PATH_ACCEL=10
N42510 $SC_SD_MAX_PATH_JERK=100
X AXIS PARAMETER

N30130 $MA_CTRLOUT_TYPE[0,AX1]=1
N30240 $MA_ENC_TYPE[0,AX1]=4
N30250 $MA_ACT_POS_ABS[0,AX1]=116052418
N31020 $MA_ENC_RESOL[0,AX1]=32
N31122 $MA_BERO_DELAY_TIME_PLUS[0,AX1]=0.0001
N32000 $MA_MAX_AX_VELO[AX1]=20000
N32010 $MA_JOG_VELO_RAPID[AX1]=2000
N32060 $MA_POS_AX_VELO[AX1]=20000
N32100 $MA_AX_MOTION_DIR[AX1]=-1
N32200 $MA_POSCTRL_GAIN[0,AX1]=2
N32200 $MA_POSCTRL_GAIN[1,AX1]=2
N32300 $MA_MAX_AX_ACCEL[AX1]=1.5
N32400 $MA_AX_JERK_ENABLE[AX1]=1
N32402 $MA_AX_JERK_MODE[AX1]=3
N32450 $MA_BACKLASH[0,AX1]=0.016
N33050 $MA_LUBRICATION_DIST[AX1]=100
N34090 $MA_REFP_MOVE_DIST_CORR[0,AX1]=17708.19337
N34200 $MA_ENC_REFP_MODE[0,AX1]=0
N34210 $MA_ENC_REFP_STATE[0,AX1]=2
N34230 $MA_ENC_SERIAL_NUMBER[0,AX1]=21171368
N35550 $MA_DRILL_VELO_LIMIT[0,AX1]=20000
N35550 $MA_DRILL_VELO_LIMIT[1,AX1]=20000
N35550 $MA_DRILL_VELO_LIMIT[2,AX1]=20000
N35550 $MA_DRILL_VELO_LIMIT[3,AX1]=20000
N35550 $MA_DRILL_VELO_LIMIT[4,AX1]=20000
N35550 $MA_DRILL_VELO_LIMIT[5,AX1]=20000
N36100 $MA_POS_LIMIT_MINUS[AX1]=-162
N36110 $MA_POS_LIMIT_PLUS[AX1]=27
N36200 $MA_AX_VELO_LIMIT[0,AX1]=21500
N36200 $MA_AX_VELO_LIMIT[1,AX1]=21500
N36200 $MA_AX_VELO_LIMIT[2,AX1]=21500
N36200 $MA_AX_VELO_LIMIT[3,AX1]=21500
N36200 $MA_AX_VELO_LIMIT[4,AX1]=21500
N36200 $MA_AX_VELO_LIMIT[5,AX1]=21500
N37600 $MA_PROFIBUS_ACTVAL_LEAD_TIME[AX1]=0.0002500000119
N37602 $MA_PROFIBUS_OUTVAL_DELAY_TIME[AX1]=0.001000000047
N43300 $SA_ASSIGN_FEED_PER_REV_SOURCE[AX1]=0
N43430 $SA_WORKAREA_LIMIT_MINUS[AX1]=-10000000

Z AXIS PARAMETER

N30130 $MA_CTRLOUT_TYPE[0,AX2]=1
N30240 $MA_ENC_TYPE[0,AX2]=4
N30250 $MA_ACT_POS_ABS[0,AX2]=153328636
N31020 $MA_ENC_RESOL[0,AX2]=32
N32000 $MA_MAX_AX_VELO[AX2]=25000
N32010 $MA_JOG_VELO_RAPID[AX2]=2000
N32060 $MA_POS_AX_VELO[AX2]=25000
N32200 $MA_POSCTRL_GAIN[0,AX2]=2
N32200 $MA_POSCTRL_GAIN[1,AX2]=2
N32300 $MA_MAX_AX_ACCEL[AX2]=1.5
N32400 $MA_AX_JERK_ENABLE[AX2]=1
N32402 $MA_AX_JERK_MODE[AX2]=3
N32450 $MA_BACKLASH[0,AX2]=0.002
N33050 $MA_LUBRICATION_DIST[AX2]=100
N34090 $MA_REFP_MOVE_DIST_CORR[0,AX2]=-23396.09308
N34200 $MA_ENC_REFP_MODE[0,AX2]=0
N34210 $MA_ENC_REFP_STATE[0,AX2]=2
N34230 $MA_ENC_SERIAL_NUMBER[0,AX2]=21171697
N35200 $MA_GEAR_STEP_SPEEDCTRL_ACCEL[0,AX2]=20
N35200 $MA_GEAR_STEP_SPEEDCTRL_ACCEL[1,AX2]=20
N35550 $MA_DRILL_VELO_LIMIT[0,AX2]=25000
N35550 $MA_DRILL_VELO_LIMIT[1,AX2]=25000
N35550 $MA_DRILL_VELO_LIMIT[2,AX2]=25000
N35550 $MA_DRILL_VELO_LIMIT[3,AX2]=25000
N35550 $MA_DRILL_VELO_LIMIT[4,AX2]=25000
N35550 $MA_DRILL_VELO_LIMIT[5,AX2]=25000
N36100 $MA_POS_LIMIT_MINUS[AX2]=-227
N36110 $MA_POS_LIMIT_PLUS[AX2]=80
N36200 $MA_AX_VELO_LIMIT[0,AX2]=26500
N36200 $MA_AX_VELO_LIMIT[1,AX2]=26500
N36200 $MA_AX_VELO_LIMIT[2,AX2]=26500
N36200 $MA_AX_VELO_LIMIT[3,AX2]=26500
N36200 $MA_AX_VELO_LIMIT[4,AX2]=26500
N36200 $MA_AX_VELO_LIMIT[5,AX2]=26500
N37600 $MA_PROFIBUS_ACTVAL_LEAD_TIME[AX2]=0.0002500000119
N37602 $MA_PROFIBUS_OUTVAL_DELAY_TIME[AX2]=0.001000000047
N43300 $SA_ASSIGN_FEED_PER_REV_SOURCE[AX2]=0

SPINDLE PARAMETER

N30130 $MA_CTRLOUT_TYPE[0,AX3]=1
N30240 $MA_ENC_TYPE[0,AX3]=1
N30250 $MA_ACT_POS_ABS[0,AX3]=-5249155
N30300 $MA_IS_ROT_AX[AX3]=1
N30310 $MA_ROT_IS_MODULO[AX3]=1
N30320 $MA_DISPLAY_IS_MODULO[AX3]=1
N31020 $MA_ENC_RESOL[0,AX3]=1024
N31040 $MA_ENC_IS_DIRECT[0,AX3]=1
N31050 $MA_DRIVE_AX_RATIO_DENOM[0,AX3]=67
N31050 $MA_DRIVE_AX_RATIO_DENOM[1,AX3]=67
N31060 $MA_DRIVE_AX_RATIO_NUMERA[0,AX3]=100
N31060 $MA_DRIVE_AX_RATIO_NUMERA[1,AX3]=100
N32000 $MA_MAX_AX_VELO[AX3]=4000
N32010 $MA_JOG_VELO_RAPID[AX3]=4000
N32020 $MA_JOG_VELO[AX3]=4000
N32100 $MA_AX_MOTION_DIR[AX3]=-1
N32110 $MA_ENC_FEEDBACK_POL[0,AX3]=-1
N32260 $MA_RATED_VELO[0,AX3]=6000
N32410 $MA_AX_JERK_TIME [AX3]=0
N35000 $MA_SPIND_ASSIGN_TO_MACHAX[AX3]=1
N35100 $MA_SPIND_VELO_LIMIT[AX3]=4000
N35110 $MA_GEAR_STEP_MAX_VELO[0,AX3]=4000
N35110 $MA_GEAR_STEP_MAX_VELO[1,AX3]=4000
N35130 $MA_GEAR_STEP_MAX_VELO_LIMIT[0,AX3]=4000
N35130 $MA_GEAR_STEP_MAX_VELO_LIMIT[1,AX3]=4000
N35160 $MA_SPIND_EXTERN_VELO_LIMIT[AX3]=4000
N35200 $MA_GEAR_STEP_SPEEDCTRL_ACCEL[0,AX3]=20
N35200 $MA_GEAR_STEP_SPEEDCTRL_ACCEL[1,AX3]=20
N35550 $MA_DRILL_VELO_LIMIT [0, AX3] =4000
N35550 $MA_DRILL_VELO_LIMIT[1,AX3]=4000
N36200 $MA_AX_VELO_LIMIT[0,AX3]=4200
N36200 $MA_AX_VELO_LIMIT[1,AX3]=4200
N36200 $MA_AX_VELO_LIMIT[2,AX3]=4200
N36200 $MA_AX_VELO_LIMIT[3,AX3]=4200
N36200 $MA_AX_VELO_LIMIT[4,AX3]=4200
N36200 $MA_AX_VELO_LIMIT[5,AX3]=4200
N36400 $MA_CONTOUR_TOL[AX3]=10
N37600 $MA_PROFIBUS_ACTVAL_LEAD_TIME[AX3]=0.0002500000119
N37602 $MA_PROFIBUS_OUTVAL_DELAY_TIME[AX3]=0.001000000047
N43200 $SA_SPIND_S[AX3]=2000
N43202 $SA_SPIND_CONSTCUT_S[AX3]=300
N43210 $SA_SPIND_MIN_VELO_G25[AX3]=50
N43220 $SA_SPIND_MAX_VELO_G26[AX3]=4000
N43230 $SA_SPIND_MAX_VELO_LIMS[AX3]=4000
N43300 $SA_ASSIGN_FEED_PER_REV_SOURCE[AX3]=0

You might also like