Scribd
Upload
156 views1 page

Ecint 11

The document discusses two models of RS232/RS485 interface converters that can electrically isolate RS232 interfaces and couple them to an RS485 network, with one model including lightning protection. The interface converters are used to convert RS232 signals to RS485 levels and can connect devices over long distances or electrically isolate interfaces. They require an external 24VDC power supply.

Uploaded by

api-3756260
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
156 views1 page

Ecint 11

The document discusses two models of RS232/RS485 interface converters that can electrically isolate RS232 interfaces and couple them to an RS485 network, with one model including lightning protection. The interface converters are used to convert RS232 signals to RS485 levels and can connect devices over long distances or electrically isolate interfaces. They require an external 24VDC power supply.

Uploaded by

api-3756260
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1.

9 INT1 INTERFACE CONVERTER

1.9.1 Order Data

Accessories
Chapter 7
General
Model Number Short Description
ECINT1-1 RS232/RS485 Interface Converter, electrically isolated, for coupling RS232 interface modules to an RS485 twisted
pair network, without lightning protection

ECINT1-11 RS232/RS485 Interface Converter, electrically isolated, for coupling RS232 interface modules to an RS485 twisted
pair network, with lightning protection

1.9.2 General Information

The INT1 interface converter is used to convert RS232 interface signals to an RS485 signal level. It is used
if:

• Data transfer is required over distances that are not possible with an RS232 interface. The distance
between two stations can be max. 5000 m when using shielded RS485 cables.
• Electrical isolation of the interface is required.
• A PCC is to be connected to a network using an RS232 interface.

The INT1 interface converter is available with and without lightning protection.

1.9.3 Supply

The INT1 interface converter requires an external 24 VDC supply voltage. Current consumption can be max.
400 mA.

General Accessories 611

You might also like