1

ARRESTER
1. ANSI/IEEE C62.1-1975 2. ANSI/IEEE C62.1a-1964 3. ANSI/IEEE C62.41-1991 STANDARD FOR SURGE ARRESTERS FOR ALTERNATING-CURRENT POWER CIRCUITS STANDARD FOR LIGHTING ARRESTERS FOR ALTERNATING-CURRENT POWER CIRCUITS RECOMMENDED PRACTICE ON SURGE VOLTAGE IN LOW-VOLTAGE AC POWER CIRCUITS SURGE ARRESTERS : METAL OXIDE SURGE ARRESTERS WITHOUT GAPS FOR AC SYSTEMS SURGE ARRESTERS : NON LINEAR RESISTOR TYPE GAPPED SURGE ARRESTERS FOR AC SYSTEMS LIGHTING ARRESTERS : EXPULSION TYPE LIGHTING ARRESTERS SURGE ARESTERS : METAL OXIDE SURGE ARRESTERS WITHOUT GAPS FOR AC SYSTEMS APPROVAL AND TEST SPECIFICATION FLUORESCENT LAMP BALLASTS APPROVAL AND TEST SPECIFICATION FLUORESCENT LAMP BALLASTS SPECIFICATION FOR OPERATION OF FLUORESCENT LAMPS ON AC 50 C/S SUPPLIES : BALLASTS BALLASTS FOR FLUORESCENT LAMPS

4. IEC TC37 WG-4 (SECRETARY) 11

5. IEC 99-2/1991

6. IEC 99-2/1962 7. IEC 99-4/1991

BALLAST
1. AS 3168-1991 2. AS C168-1963 3. BS 2818-1962

4. IEC 82/1962

5. IS 1534-1967

6. IEC 929/1990

SPECIFICATION FOR BALLAST FOR FLUORESCENT LAMPS : FOR SWITCH START CIRCUITS AC SUPPLIED ELECTRONIC BALLAST FOR TO BULAR FLUORESCENT LAMPS PERFORMANCE REQUIREMENTS BUSBARS AND BUSBAR CONNECTIONS RECOMMENDATION FOR COMMERCIAL PURITY ALUMINIUM BUSBAR MATERIAL GENERAL REQUIREMENTS AND TEST PROCEDDURE FOR OUTDOOR APPARATUS BUSHINGS STANDARD ELECTRICAL, DIMENSIONAL, AND RELATED REQUIREMENTS FOR OUTDOOR APPARATUS BUSHINGS STANDARD GENERAL REQUIREMENTS AND TEST PROCEDURE FOR OUTDOOR APPARATUS BUSHINGS STANDARD PERFORMANCE CHARACTERISTICS AND DIMENSIONS FOR OUTDOOR APPARATUS BUSHINGS STANDARD REQUIREMENTS AND TEST CODE FOR OUTDOOR APPARATUS BUSHINGS BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V.

BUSBAR
1. BS 159-1957 2. IEC 105/1958

BUSHING
1. ANSI/IEEE C76.1-1976

2. ANSI/IEEE C76.2-1977

3. ANSI/IEEE STD21-1976

4. ANSI/IEEE STD24-1984

5. ASA/IEEE C76.1-1964

6. IEC 137/1984

CABLE
1. ANSI/IEEE STD422-1986 STANDARD FOR THE DESIGN AND INSTALLATION OF CABLE SYSTEMS IN POWER GENERATING STATIONS STANDARD FOR THE APPLICATION OF SHEATH BONDING METHODS FORSINGLE CONDUCTOR CABLES AND THE CACULLATION OF INDUCED VOLTAGES AND CURRENTS IN CABLE SHEATHS SPECIFICATION FOR RADIO-FREQUENCY CABLES-GENERAL REQUIREMENTS AND TESTS BRITISH GOVERNMENTS SERVICES REQUIREMENTS RECOMMENDATIONS FOR TESTS OR IMPREGNATED PAPER-INSULATED METALSHEOTHED CABLES TEST VOLTAGES OF 10 kV TO 66 kV (EXCLUDING GAS PRESSURE AND OIL FILLED) TEST ON IMPREGNATED PAPER INSULATED METAL- SHEATHED CABLES : CABLES FOR ALTERNATING VOLTAGES FROM 10 kV UP TO AND INCLUDING 66 kV (EXCLUDING GAS - PRESSURE, OIL - FILLED AND NON DRAINING CABLES ) NOMINAL CROSS SECTIONAL AREAS AND COMPOSITION OF CIRCULAR COPPER CONDUCTORS FOR RUBBER OR POLYVINYL CHORIDE INSULSTED CABLES AND

2. ANSI/IEEE STD575-1988

3. BS 2316 : PARTS 1&2 : 1963

4. IEC 55/1957

5. IEC 55-1/1965

6. IEC 10/1965

7. IEC 183/1965 8. 1EC 2281993 9. IEC 230/1966 10. IEC 391/1972 11. IEC 502/1983

FLEXIBLE CORDS WITH A RATED VOLTAGE NOT EXCEEDING 750 V GUIDE TO THE SELECTION OF HIGH VOLTAGE CABLES CONDUVTORS OF INSULATED CABLES IMPULSE TESTS ON CABLES AND THEIR ACCESSORIES MARKING OF INSULATED CONDUCTORS EXTRUDED SOLID DIELECTRIC INSULATED POWER CABLES FOR RATED VOLTAGES FROM 1 kV UP TO 30 kV TEST METHODS FOR INSULATIONS AND SHEATHED OF ELECTRIC CABLES AND CORDS (ELASTOMETRIC AND THERMOPLASTIC COMPOUNDS) GUIDE ON METHODS OF MEASUREMENT OF SHORT DURATION TRANSIENTS ON LOW VOLTAGE POWER AND SIGNAL LINES TEST FOR POWER CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES ABOVE 30 kV (Um = 36 kV) UP TO 150 kV (Um = 170 kV) OVERHEAD LINES REQUIREMENTS AND TEST FOR FITTING TESTING METHODS FOR RUBBER OR PLASTIC INSULATED WIRES AND CABLES RADIO FREQUENCY COAXIAL CABLES

12. IEC 60502-1/1998 13. IEC 540/1982

14. IEC 816/1984

15. IEC 840/1988

16. IEC 1284/1995 17. JIS C3005-1986 18. JIS C3501-1975

19. NEMA NO. WC7-1982

20. NEMA NO. MW 1000-1981 21. VDE 0255/11.72 (ENGL)-1973

22. VDE 0278 : PART 1

23. VDE 0278 : PART 4

CROSS - LINKED THERMOSETTING POLYCTHYLENE INSULATED WIRES AND CABLE FOR TRANMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY MAGNET WIRE REGULATIONS FOR MASS-IMPREGNATED PAPER-INSULATED METAL-SHEATHED CABLES FOR ELECTRICITY SUPPLY (EXCEPT EXTERNAL GAS- PRESSURE AND OILFILLED CABLES) POWER CABLE ACCESSORIES WITH NOMINAL VOLTAGE U UP TO 30 kV (Um = 36 kV) : REQUIREMENTS AND TEST METHODS POWER CABLE ACCESSORIES WITH NOMINAL VOLTAGE U UP TO 30 kV (Um = 36 kV) : INDOOR SEALING ENDS ABOVE 1 kV (Um > 1.1 kV) STANDARD FOR CONNECTORS FOR USE ALUMINUM OR ALUMINUM-COPPER OVERHEAD CONDUCTORS STANDARD FOR ELECTRIC CONDUCTORS CONNECTORS FOR USE BETWEEN ALUMINUM TO ALUMINUM OF ALUMINUM TO COPPER BARE OVERHEAD CONDUCTORS INTERNATIONAL LETTER SYMBOLS USED IN CONNECTION WITH ELECTRICITY

CONNECTOR
1. ANSI/IEEE C119.4-1976

2. ANSI C119.4-1991

3. IEC 27/1953

4. IEC 5O(15)/1957

5. IEC 117-1/1960

QUANTITY SYMBOLS-ALPHABETS AND LETTER TYPE INTERNATIONAL ELECTROTECHNICAL VOCABULARY GROUP 15 SWITHBOARDS AND APPARATUS FOR CONNECTION AND REGULATION RECOMMENDED GRAPHICAL SYMBOLS : KIND OF CURRENT, DISTRIBUTION SYSTEMS, METHODS OF CONNECTION AND CIRCUIT ELEMENTS

CIRCUIT BREAKER
1. ANSI/IEEE C37.5-1979 2. ANSI/IEEE C37.50-1981 TEST PROCEDURES FOR LOW VOLTAGE AC POWER CIRCUIT BREAKERS USED IN ENCLOSURES FOR CONFORMANCE TESTING OF METAL ENCLOSED LOW VOLTAGE AC POWER CIRCUIT BREAKER SWITCHGEAR ASSEMBLIES TEST PROCEDURES FOR LOW VOLTAGE AC POWER CIRCUIT PROTECTORS USED IN ENCLOSURES HIGH INTERRUPTING CAPACITY FUSES, CURRENT LIMITTING TYPES CIRCUIT BREAKERS AND CIRCUIT BREAKER ENCLOSURES FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS RESIDUAL CURRENT CURRENT OPERATED CIRCUIT - BREAKERS

3. ANSI/IEEE C37.51-1979

4. ANSI/IEEE C37.52-1974

5. ANSI/UL 198C-1981 6. ANSI/UL 877-1955

7. BS 4293 : 1983

8. IEC 157-1/1964 9. IEC 157-1A/1976 10. IEC 157-1B/1979 11. IEC 898/1987

12. IEC 947-1/1988 13. IEC 947-2/1989 14. JIS C3870-1977 15. USAS C37.04-1964

LOW VOLTAGE DISTRIBUTION SWITCHGEAR : CIRCUIT BREAKERS LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR : CIRCUIT BREAKERS LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR : CIRCUIT BREAKERS CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR : GENERAL RULES LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR : CIRCUIT BREAKERS MOLDED CASE CIRCUIT BREAKERS RATING STRUCTURE FOR AC HIGH VOLTAGE CIRCUIT BREAKERS ELECTROMAGNETIC COMPATIBILITY FOR INDUSTRIAL PROCESS MEASUREMENT AND CONTROL EQUIMENT : ELECTROSTATIC DISCHARGE REQUIREMRNTS ELECTROMAGNETIC COMPATIBILITY (EMC) PART 1 : GENERAL SECTION 1 : APPLICATION AND INTERPRETATION OF FUNDAMENTAL DEFINITIONS AND TERMS

ELECTROMAGNETIC COMPATIBILITY (EMC)

1. IEC 801-2/1984

2. IEC 1000-1/1992

3. IEC 1000-2-1/1990

4. IEC 1000-2-2/1990

5. IEC 1000-2-3/1992

6. IEC 1000-2-4/1994

7. IEC 1000-2-5/1995

ELECTROMAGNETIC COMPATIBILITY (EMC) PART 2 : ENVIRONMENT SECTION 1 DESCRIPTION OF THE ENVIRONMENT ELECTROMAGNETIC ENVIRONMENT FOR LOW FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC POWER SUPPLY SYSTEMS ELECTROMAGNETIC COMPATIBILITY (EMC) PART 2 : ENVIRONMENT SECTION 2 : COMPATIBILITY LEVELS FOR LOWFREQUENCYCONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW VOLTAGE POWER SUPPLY SYSTEMS ELECTROMAGNETIC COMPATIBILITY (EMC) PART 2 : ENVIRONMENT SECTION 3 : DESCRIPTION OF THE ENVIRONMENT RADIATED AND NON NETWORK FREQUENCY RELATED CONDUCTED PHENOMENA ELECTROMAGNETIC COMPATIBILITY (EMC) PART 2 : ENVIRONMENT SECTION 4 : COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOWFREQUENCY CONDUCTED DISTURBANCES ELECTROMAGNETIC COMPATIBILITY (EMC) PART 2 : ENVIRONMENT SECTION 5 : CLASSIFICATION OF

8. IEC 1000-2-6/1995

9. IEC 1000-2-9/1996

10. IEC 1000-3-2/1995

11. IEC 1000-3-3/1994

12. IEC 1000-4-1/1992

ELECTROMAGNETIC ENVIRONMENTS BASIC EMC PUBLICATION ELECTROMAGNETIC COMPATIBILITY (EMC) PART 2 : NVIRONMENT SECTION 6 : ASSESSMENT OF THE MISSION LEVELS IN THE POWER SUPPLY OF INDUSTRIAL PLANTS AS REGARDS LOW FREQUENCY CONDUCTED DISTURBANCES ELECTROMAGNETIC COMPATIBILITY (EMC) PART 2 : ENVIRONMENT SECTION 9 : DESCRIPTION OF HEMP ENVIRONMENT RADIATED DISTURBANCES BASIC EMC PUBLICATION ELECTROMAGNETIC COMPATIBILITY (EMC) PART 3 : LIMITS SECTION 2 : LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT 16 A PERPHASE) ELECTROMAGNETIC COMPATIBILITY (EMC) PART 3 : LIMITS SECTION 3 : LIMITATION OF VOLTAGE FLUCTUATIONS AND FLICKER IN LOW VOLTAGE SUPPLY SYSTEMS FOR EQUIPMENT WITH RATED CURRENT 16 A ELECTROMAGNETIC COMPATIBILITY (EMC) PART 4 : TESTING AND MEASUREMENT TECHNIQUES

10

13. IEC 1000-4-2/1995

14. IEC 61000-4-3/1998

15. IEC 1000-4-4/1995

16. IEC 1000-4-5/1995

17. IEC 1000-4-6/1996

SECTION 1 : OVERVIEW OF IMMUNITY TESTS BASIC EMC PUBLICATION ELECTROMAGNETIC COMPATIBILITY (EMC) PART 4 : TESTING AND MEASUREMENT TECHNIQUES SECTION 2 : ELECTROSTATIC DISCHARGE IMMUNITY TEST BASIC EMC PUBLICATION ELECTROMAGNETIC COMPATIBILITY (EMC) PART 4 : TESTING AND MEASUREMENT TECHNIQUES SECTION 3 : RADIATED, RADIO FREQUENCY, ELECTROMAGNETIC FIELD IMUNITY TEST ELECTROMAGNETIC COMPATIBILITY (EMC) PART 4 : TESTING AND MEASUREMENT TECHNIQUES SECTION 4 : ELECTRICAL FAST TRANSIENT / BURST IMMUNITY TEST BASIC EMC PUBLICATION ELECTROMAGNETIC COMPATIBILITY (EMC) PART 4 : TESTING AND MEASUREMENT TECHNIQUES SECTION 5 : SURGE IMMUNITY TEST ELECTROMAGNETIC COMPATIBILITY (EMC) PART 4 : TESTING AND MEASUREMENT TECHNIQUES SECTION 6 : IMMUNITY TO CONDUCTED

11

18. IEC 1000-4-7/1991

19. IEC 1000-4-8/1993

20. IEC 1000-4-9/1993

21. IEC 1000-4-10/1993

DISTURBANCES, INDUCED BY RADIO FREQUENCY FIELDS ELECTROMAGNETIC COMPATIBILITY (EMC) PART 4 : TESTING AND MEASUREMENT TECHNIQUES SECTION 7 :GENERAL GUIED ON HARMONICS AND INTER HARMONICS MEASUREMENT AND INTRUMENTATING FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO ELECTROMAGNETIC COMPATIBILITY (EMC) PART 4 : TESTING AND MEASUREMENT TECHNIQUES SECTION 8 : POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST BASIC EMC PUBLICATION ELECTROMAGNETIC COMPATIBILITY (EMC) PART 4 : TESTING AND MEASUREMENT TECHNIQUES SECTION 9 : PULSE MAGNETIC FIELD IMMUNITY TEST BASIC EMC PUBLICATION ELECTROMAGNETIC COMPATIBILITY (EMC) PART 4 : TESTING AND MEASUREMENT TECHNIQUES SECTION 10 : DAMPED OSCILLATORY MAGNETIC FIELD IMMUNITY TEST BASIC EMC PUBLICATION

12

22. IEC 1000-4-11/1994

23. IEC 1000-4-24

24. IEC 1000-5-5/1996

ELECTROMAGNETIC COMPATIBILITY (EMC) PART 4 : TESTING AND MEASUREMENT TECHNIQUES SECTION 11 : VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS ELECTROMAGNETIC COMPATIBILITY (EMC) PART 4 : TESTING AND MEASUREMENT TECHNIQUES SECTION 24 : TEST METHODS FOR PROTECTIVE DEVICES FOR HEMP CONDUCTED DISTURBANCE BASIC EMC PUBLICATION ELECTROMAGNETIC COMPATIBILITY (EMC) PART 5 : INSTALLATION AND MITIGATION GUIDE LINES SECTION 5 : SPECIFICATION OF PROTECTIVE DEVICES FOR HEMP CONDUCTED DISTURBANCE BASIC EMC PUBLICATION STANDARD FOR RATING AND FIRE TESTING OF FIRE EXTINGUISHERS PORTABLE FIRE EXTINGUISHERS : POWDER TYPE SPECIFICATION FOR PORTABLE FIRE EXTINGUISHERS

FIRE EXTINGUISHER
1. ANSI/UL 711-1984 2. AS 1846-1985 3. BS 5423-1987

13

4. BS 3116-1974

AUTOMATIC FIRE ALARM SYSTEMS IN BUILDINGS PART 4 : CONTROL AND INDICATING EQUIPMENT STANDARD SERVICE CONDITIONS AND DEFINITIONS FOR HIGH VOLTAGE FUSES, DISTRIBUTION ENCLOSED SINGLE POLE AIR SWITCHES, FUSE DISCONNECTING SWITCHES, AND ACCESSORIES STANDARD DESIGN TESTS FOR HIGH VOLTAGE FUSES, DISTRIBUTION ENCLOSED SINGLE POLE AIR SWITCHES, FUSE DISCONNECTING SWITCHES, AND ACCESSORIES SPECIFICATION FOR DISTRIBUTION CUTOUTS AND FUSE LINKS CURRENT LIMITING FUSES SPECIFICATION FOR FUSE FOR VOLTAGES NOT EXCEEDING 1000 V FOR AC AND DC DISTRIBUTION FUSE LINKS FOR USE IN DISTRIBUTION ENCLOSED, OPEN AND OPEN LINK CUTOUTS POWER FUSES AND FUSE DISCONNECTING SWITCHES

FUSE
1. ANSI/IEEE C37.40-1981

2. ANSI/IEEE C37.41-1981

3. ANSI/IEEE C37.42-1981 4. IEC 282-1/1974 5. IEC

6. ANSI/IEEE C37.43-1962

7. ANSI/IEEE C37.46-1962

14

HIGH VOLTAGE TEST TECHNIQUES

1. ANSI/IEEE STD1122-1987 IEEE STANDARD FOR DIGITAL RECORDERS FOR MEASUREMENTS IN HIGH VOLTAGE IMPULSE TESTS HIGH VOLTAGE TESTING TECHNIQUES : GENERAL DEFINITIONS, TEST REQUIREMENTS, TEST PROCEDURES AND MEASURING DEVICES HIGH VOLTAGE TESTING TECHNIQUES : APPLICATION GUIDE FOR MEASURING DEVICES STANDARD TECHNIQUES FOR HIGH VOLTAGE TESTING RECOMMENDATIONS FOR VOLTAGE MEASUREMENT BY MEANS OF SPHERE GAPS (ONE SPHERE EARTHED) HIGH VOLTAGE TESTING TECHNIQUES : GENERAL DEFINITIONS AND TEST REQUIREMENTS HIGH VOLTAGE TESTING TECHNIQUES : MEASURING SYSTEMS HIGH VOLTAGE TESTING TECHNIQUES : MEASURING DEVICES HIGH VOLTAGE TESTING TECHNIQUES : APPLICATION GUIDE FOR MEASURING DEVICES PART 1 : REQUIREMENT FOR DIGITAL RECORDS

2. AS 1931-1/1976

3. AS 1931-2/1977

4. IEEE STD4-1995 5. IEC 52/1960

6. IEC 60-1/1989

7. IEC 60-2/1994 8. IEC 60-3/1976

9. IEC 60-4/1977

10. IEC 1083-2/1991

15

11. IEC 1083-2/1996

INSTALLATION
1. IEC 364-3/1980 ELECTRICAL INSTALLATIONS OF BUILDINGS : ASSESSMENT OF GENERAL CHARACTERISTICS ELECTRICAL INSTALLATIONS OF BUILDINGS SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT : EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS THERMAL MECHANICAL PERFORMANCE TEST AND MECHANICAL PERFORMANCE TEST ON STRING INSULATOR UNITS REGULATIONS FOR RATING AND TESTING THE INSULATION OF ELECTRICAL INSTALLATIONS AND EQUIPMENT FOR ALTERNATING VOLTAGES ABOVE 1 KV REGULATIONS FOR ANTENNA SYSTEMS : INSULATION AND OPERATION INSULATION CO ORDINATION : DEFINITIONS PRINCIPLES AND RULES INSULATION CO ORDINATION : APPLICATION GUIDE RECOMMENDED TEST CELLS MEASURING THE RESISTIVITY OF NSULATING LIQUIDS AND METHODS OF CLEANING THE CELLS

2. IEC 364-5-54/1980

3. IEC 575/1977

4. VDE 0111/12.6(ENGL.)

5. VDE 0855 PART 1/7.71(ENGL.)

INSULATION RESISTANCE
1. IEC 71-1/1993 2. IEC 71-2/1993 3. IEC 247/1967

16

4. IEC 664/1980

5. IEC 664A/1981

6. IEC 664-1/1992

7. IEEE 43-1974

INSULATION CO ORDINATION WITHIN LOW VOLTAGE SYSTEMS, INCLUDING CLEARANCES AND CREEPAGE DISTANCE FOR EQUIPMENTS INSULATION CO ORDINATION WITHIN LOW VOLTAGE SYSTEMS, INCLUDING CLEARANCES AND CREEPAGE DISTANCE FOR EQUIPMENTS INSULATION CO ORDINATION FOR EQUIPMENT WITHIN LOW - VOLTAGE SYSTEMS : PRINCIPLES, REQUIREMENTS AND TESTS IEEE RECOMMENDED PRACTICE FOR TESTING INSULATION RESISTANCE OF ROTATING MACHINERY TEST METHODS FOR ELECTRICAL POWER INSULATORS STANDARD FOR INSULATORS WET PROCESS PORCELAIN AND TOUGHENED GLASS SUSPENSION TYPE STANDARD FOR WET PROCESS PORCELAIN INSULATORS (SPOOL TYPE) STANDARD FOR WET PROCESS PORCELAIN INSULATORS (STRAIN TYPE) STANDARD FOR WET - PROCESS PORCRLAIN INSULATORS (LOW AND MEDIUM VOLTAGE PIN TYPE)

INSULATORS
1. ANSI C29.1-1988 2. ANSI C29.2-1992

3. ANSI C29.3-1980 4. ANSI C29.4-1977 5. ANSI C29.5-1969

17

6. ANSI G29.6-1977 7. ANSI C29.7-1983

8. ANSI C29.7-1983 9. AS STANDARD 10. AS 1137-1/1981

11. AS 1137-2/1981

12. AS 1372-1974

13. AS 2947.1-1989

14. AS 2947.2-1989

15. CAN/CSA-C41101-M89

STANDARD FOR WET - PROCESS PORCRLAIN INSULATORS (HIGH VOLTAGE PIN TYPE) STANDARD FOR WET - PROCESS PORCRLAIN INSULATORS HIGH VOLTAGE LINE POST TYPE STANDARD FOR WET - PROCESS PORCRLAIN INSULATORS APPARATUS, POST TYPE CATCLOG INSULATOR STANDARD LINE PIN INSULATORS : PORCELAIN AND GLASS INSULATORS FOR OVERHEAD POWER LINES (FOR VOLTAGES GREATER THAN 1000 V AC) INSULATORS : PORCELAIN AND GLASS PIN AND SHACKLE INSULATORS FOR OVERHEAD POWER LINES (FOR VOLTAGES NOT EXCEEDING 1000 V AC) TESTS ON HOLLOW INSULATORS OF CERAMIC MATERAIL OR GLASS FOR USE IN ELETRICAL EQUIPMENT FOR VOLTAGES ABOVE 1000 V INSULATORS - PORCELAIN AND GLASS FOR OVERHEAD POWER LINES VOLTAGES GREATER THAN 1000 V AC : TEST METHODS INSULATORS - PORCELAIN AND GLASS FOR OVERHEAD POWER LINES VOLTAGES GREATER THAN 1000 V AC : CHARACTERISTICS AC SUSPENSION INSULATORS

18

16. IEC 75/1955

17. IEC 168/1964

18. IEC 233/1974 19. IEC 273/1990

20. IEC 383/1983

21. IEC 437/1973 22. IEC 575/1977

23. IEC 660/1979

24. IEC 815/1986

I.E.C. SPECIFICATION FOR PORCELAIN INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOTAGE OF 1000 VOLTS AND UPW ARDS TEST ON INDOOR AND OUTDOOR POST INSULATORS FOR SYSTEMS WITH NOMINAL VOTAGES GREATER THAN 1000 V TESTS ON HOLLOW INSULATORS FOR USE IN ELECTRICAL EQUIPMENT CHARACTER IS TIES OF INDOOR AND OUTDOOR POST INSULATORS FOR SYSTEMS WITH NOMINAL VOTAGES GREATER THAN 1000 V TESTS ON INSULATORS OF CERAMIC METERIAL OR GLASS FOR OVERHEAD LINES WITH A NOMINAL VOTAGE GREATER THAN 1000 V RADIO INTERFERENCE TESTS ON HIGH VOLTAGE INSULATORS THERMAL MECHANICAL PERFORMANCE TEST AND MECHANICAL PERFORMANCE TEST ON STRING INSULATOR UNITS TEST ON INDOOR POST INSULATORS OF ORGANIC MATERIAL FOR SYSTEMS WITH NOMINAL VOTAGES GREATER THAN 1000 V UP TO BUT NOT INCLUDING 300 kV GUIDE FOR THE SELECTION OF INSULATORS IN RESPECT OF POLLUTED CONDITIONS

19

25. JIS C3851-1982 26. TD-24/1957

3.3 kV TO 33 kV EPOX - RESIN POST INSULATORS FOR INDOOR USE SPECIFICATIONS FOR PORCELAIN WIREHOLDERS METHOD FOR ASSESSING THE OXIDATION STABILITY OF INSULATING OILS METHOD FOR THE DETERMINATION OF THE ELECTRIC STRENGTH OF INSULATING OILS SPECIFICATION FOR NEW INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR SPECIFICATION FOR NEW INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR BUSWAYS AND ASSOCIATED FITTINGS TERMINAL BLOCKS FOR INDUSTRIAL USE CABINETS AND BOXES DEAD - FRONT SWITCHBOARDS SPACINGS PANELBOARDS SAFE INSTALLATION, OPERATION AND MAINTENANCE OF PANELBOARDS DEADFRONT DISTRIBUTION SWITCHBOARDS OUTLET BOXES AND FITTINGS FOR USE IN HAZARDOUS ( CLASSIFIED ) LOCATIONS

OIL LIQUID
1. IEC 74/1963 2. IEC 156/1963 3. IEC 296/1969

4. IEC 296A/1971

PANELBOARD
1. ANSI C33.34-1976 2. ANSI/NEMA ICS4-1983 3. ANSI/UL 50-1979 4. ANSI/UL 891-1984 5. NEMA NO. 1-111-1979 6. NEMA NO. PB1-1984 7.NEMA NO. PB1.1-1977 8. NEMA NO. PB2-1978 9. ANSI/UL 886-1985

20

PARTIAL DISCHARGES
1. CIGRE 2. IEC C.I.S.P.R. 1/1961 RECOGNITION OF DISCHARGES SPECIFICATION FOR C.I.S.P.R. RADIO INTERFERENCE MEASURING APPARATU FOR THE FREQUENCY RANGE 0.15 Mc/s TO 30 Mc/s INSTRUMENT TRANSFORMERS : MEASUREMENTS OF PARTIAL DISCHARGES RECOMMENDED METHODS FOR THE DETERMINATION OF THE PERMITTIVITY AND DIELECTRIC DISSIPATION FACTOR OF ELECTRICAL INSULATING MATERIALS AT POWER, AUDIO AND RADIO FREQUENCIES INCLUDING METRE WAVELENGTHS PARTIAL DISCHARGE MEASUREMENTS ELECTRICAL TEST METHODS FOR ELECTRIC CABLES : PARTIAL DISCHARGE TESTS FOR BALANCED PARTIAL DISCHARGE DETECTOR ( PEAK AND AVERAGE LEVEL MEASUREMENTS ) METHODS OF MEASUREMENT OF RADIO INFLUENCE VOLTAGE ( RIV ) OF HIGH VOLTAGE APPARATUS PARTIAL DISCHARGES

3. IEC 44-4/1980 4. IEC 250/1969

5. IEC 60270/1998 6. IEC 885-2/1987

7. INSTRUCTION MANUAL 66-2J

8. NEMA NO.107-1987

9. VDE 0434

21

POWER CAPACITOR
1. IEC 70/1967 2. IEC 70A/1968 3. IEC 358/1971 4. IEC 831-1/1988 POWER CAPACITORS POWER CAPACITORS : SELF - HEALING METALLIZED POWER CAPACITORS COUPLING CAPACITORS AND CAPACITORS DIVIDERS SHUNT POWER CAPACITORS OF SELF HAELING TYPE FOR AC SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 660 V PART 1 : GENERAL PERFORMANCE, TESTING AND RATING SAFETY REQUIREMENTS GUIDE FOR INSTALLATION AND OPERATION PART 2 : AGEING TEST, SELF HEATING TEST AND DESTRUCTION TEST ELECTRICAL RELAYS : SPECIFIED - TIME ALL - OR - NOTHING RELAYS ELECTRICAL RELAYS : SINGER INPUT ENERGIZING QUANTITY MEASURING RELAYS WITH NON SPECIFIED TIME OR WITH INDEPENDENT SPECIFIED TIME ELECTRICAL RELAYS : INSULATION TESTS FOR ELECTRICAL RELAYS

5. IEC 831-2/1988

RELAYS
1. IEC 255-2/1969

2. IEC 255-3/1971

3. IEC 255-5/1977

22

4. IEC 255-7/1978

5. IEC 255-20/1984 6. ANSI/IEEE C37.90.1-1989

ELECTRICAL RELAYS : TESTS AND MEASUREMENT PROCEDURES FOR ELECTROMECHANICAL ALL - OR - NOTHING RELAYS ELECTRICAL RELAYS : PROTECTION ( PROTECTIVE ) SYSTEMS SURGE WITHSTAND CAPABILITY (SWC) TEST FOR PROTECTIVE RELAYS AND RELAY SYSTEMS METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELETRICAL INSULATING MATERIALS MEASUREMENT OF RELATIVE PERMITIVITY DIELECTRIC DISSIPATION FACTOR AND DC RESISTIVITY OF INSULATING LIQUIDS DEFINITIONS AND REQUIREMENTS FOR HIGH VOLTAGE AIR SWITCHES, INSULATORS, AND BUS SUPPORTS SUPPLEMENT TO DEFINITIONS AND REQUIREMENTS FOR HIGH VOLTAGE AIR SWITCHES, INSULATORS AND BUS SUPPORTS SCHEDULES OF PREFERRED RATINGS, MANUFACTRING SPECIFICATIONS AND APPLICATION GUIDE FOR HIGH VOLTAGE

RESISTIVITY
1. IEC 93/1980

2. IEC 247/1978

SWITCH
1. ANSI/IEEE C37.30-1971

2. ANSI/IEEE C37.30a-1975

3. ANSI/IEEE C37.32-1972

23

4. ANSI/IEEE C37.34/1971 5. ANSI/IEEE C37.63-1984

6. BS 5419-1977

7. IEC 129/1975 8. IEC 265/1968 9. IEC 265-1/1983

10. IEC 337-1/1970

AIR SWITCHES, BUS SUPPORTS AND SWITCH ACCESSORIES TEST CODE FOR HIGH VOLTAGE AIR SWITCHES STANDARD REQUIREMENTS FOR OVERHEAD, PADMOUNTED, DRY VAULT AND SUBMERSIBLE AUTOMATIC LINE SECTIONALIZERS FOR AC SYSTEMS SPECIFICATION FOR AIR - BREAK SWITCHES, AIR-BREAK DISCONNECTORS, AIR - BREAK SWITCH DISCONNECTORS AND FUSE COMBINATION UNITS FOR VOLTAGES UP TO AND INCLUDING 1000 V AC AND 1200 V DC ALTERNATING CURRENT DISCONNECTORS (ISOLATORS) AND EARTHING SWITCHES HIGH VOLTAGE SWITCHES HIGH VOLTAGE SWITCHES : HIGH VOLTAGE SWITCHES FOR RATED VOLTAGES ABOVE 1 kV AND LESS THAN 52 kV CONTROL SWITCHES ( LOW VOLTAGE SWITCHING DEVICES FOR CONTROL AND AUXILIARY CIRCUITS, INCLUDING CONTACTOR RELAYS ) : GENERAL REQUIREMENTS

24

SWITCHGEAR
1. ANSI/IEEE C37.53.1-1982 STANDARD FOR SWITCHGEAR - HIGH VOLTAGE CURRENT - LIMITING, MOTOR STARTER FUSES - CONFORMANCE TEST PROCEDURES LOW VOLTAGE CONTROLGEAR PART 1 : CONTACTORS AC METAL - ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR VOLTAGE ABOVE 1 kV AND UP TO AND INCLUDING 52 kV LOW - VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES : REQUIREMENTS FOR TYPE- TSETED AND PARTIALLY TYPE TESTED ASSEMBLIES COMMON CLAUSES FOR HIGH VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS A METHOD OF TEMPERATURE RISE ASSESSMENT BY EXTRAPOLATION FOR PARTIALLY TYPE - TESTED ASSEMBLIES ( PTTA ) OF LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR GENERAL STANDARDS FOR INDUSTRIAL CONTROL AND SYSTEM LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR PART 7 : ANCILLARY EQUIMENT SECTION ONE TERMINAL BLOCKS FOR COPPER CONDUCTORS

2. IEC 158-1/1983 3. IEC 298/1990

4. IEC 439-1/1991

5. IEC 694/1996

6. IEC 890/1987

7. NEMA NO. ICSI-1978 8. IEC 947-7-1/1989

25

SWITCHFUSE
1. ANSI C37.42-1969 SPECIFICATION FOR DISTRIBUTION ENCLOSED, OPEN, AND OPEN LINK CUTOUTS DISTRIBUTION FUSE LINKS FOR USE IN DISTRIBUTION ENCLOSSED, OPEN AND OPEN LINK CUTOUTS POWER FUSES AND FUSE DISCONNECTING SWITCHES FOR MEASUREMENT OF VOLTAGE IN DIELECTRIC TESTS TECHNIQUES FOR DIELECTRIC TESTS STANDARD GENERAL REQUIREMENTS FOR LIQUIDIM MERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS REQUIREMENTS FOR TRANSFORMER 138000 VOLTS AND BELOW 501 THROUGH 10000/13333/16667 kVA, SINGLE - PHASE 501 THROUGH 30000/40000/50000 kVA, THRE PHASE REQUIREMENT FOR OVERHEAD - TYPE DISTRIBUTION TRANSFORMERS, 500 kVA AND SMALLER : HIGH - VOLTAGE, 67000 VOLTS AND BELOW ; LOW VOLTAGE, 15000 VOLTS AND BELOW

2. ANSI/IEEE C37.43-1962

3. ANSI/IEEE C37.46-1962

TAN
1. AMERICAN STANDARD 2. USAS C68.1-1968

TRANSFORMER
1. ANSI/IEEE C57.12.00-1987

2. ANSI/IEEE C57.12.10-1969

3. ANSI/IEEE C57.12.20-1981

26

4. ANSI/IEEE C57.12.90-1993

5. ANSI/IEEE C57.12.91-1979 6. ANSI/IEEE C57.13-1993 7. ANSI/IEEE C57.98-1986 8. BRITISH ELECTRICITY BOARDS 9. BS 3938-1973 10. IEC 44-1/1996 11. IEC 60044-2/1997 12. IEC 44-3/1980 13. IEC 76/1967 14. IEC 76-1/1993 15. IEC 76-2/1993 16. IEC 76-3/1980

STANDARD TEST CODE FOR LIQUID IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS AND SHORT - CIRCUIT TESTING OF DISTRIBUTION AND POWER TRANSFORMERS STANDARD TEST CODE FOR DRY TYPE DISTRIBUTION AND POWER TRANSFORMER REQUIREMENTS FOR INSTRUMENT RANSFORMERS GUIDE FOR TRANSFORMERS IMPULSE TESTS GUIDE ON IMPULSE VOLTAGE TESTING POWER TRANSFORMERS AND REACTORS SPECIFICATION FOR CURRENT TRANSFORMERS INSTRUMENT TRANSFORMERS PART 1 : CURRENT TRANSFORMERS PART 2 : INDUCTIVE VOLTAGE TRANSFORMERS INSTRUMENT TRANSFORMERS PART 3 : COMBINED TRANSFORMERS POWER TRANSFORMERS POWER TRANSFORMERS : GENERAL POWER TRANSFORMERS : TEMPERATURE RISE POWER TRANSFORMERS : INSULATION LEVELS AND DIELECTRIC TESTS

27

17. IEC 76-3-1/1987

18. IEC 76-4/1976 19. IEC 76-5/1976 20. IEC 289/1968 21. IEC 354/1991 22. IEC 722/1983

23. IEC 726/1982 24. IEC 742/1983

25. IEC 790/1984 26. VDE 0532/8.64(ENGL.)-1966 27. USA STANDARD C57.13-1968

POWER TRANSFORMERS : INSULATION LEVELS AND DIELECTRIC TESTS EXTERNAL CLEARANCES IN AIR POWER TRANSFORMERS : TAPPINGS AND CONNECTIONS POWER TRANSFORMERS : ABILITY TO WITHSTAND SHORT CIRCUIT REACTORS LOADING GUIDE FOR OIL IMMERSED POWER TRANSFORMERS GUIDE TO THE LIGHTNING IMPULSE AND SWITCHING IMPULSE TESTING OF POWER TRANSFORMERS AND REACTORS DRY TYPE POWER TRANSFORMERS ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS : REQUIREMENTS OSCILLOSCOPES AND PEAK VOLTMETERS FOR IMPULSE TESTS RULES FOR TRANSFORMERS AND REACTORS REQUIREMENTS FOR INSTRUMENT TRANSFORMERS INTERNATIONAL VOCABULARY ELECTROTECHNICAL

OTHERS
1. IEC 50(00)/1970

28

2. IEC 50(25)/1965

3. IEC 112/1959

4. IEC 160/1963 5. IEC 164/1964

6. IEC 335-1/1970

7. IEC 376/1971 8. IEC 521/1988 9. JIS C9301-1981

INTERNATIONAL ELECTROTECHNICAL VOCABULARY GROUP 25 GENERATION, TRANSFORMERS AND DISTRIBUTION OF ELECTRICAL ENERGY RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS STANDARD ATMOSPHERIC CONDITIONS FOR TEST PURPOSES RECOMMENDATIONS IN THE FIELD OF QUANTITIES AND UNITS USED IN ELEGTRICITY SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES : GENERAL REQUIREMENTS SPECIFICATION AND ACCEPTANCE OF NEW SULPHUR HEXAFLUORIDE CLASS 0.5, 1 AND 2 ALTERNATING CURRENT WATTHOUR METERS AC ARC WELDING MACHINES ELECTRICAL PROTECTIVE RELAYS SPECIFICATION FOR THE MARKING AND ARRANGEMENT OF SWITCHGEAR BUSBARS MAIN CONNECTIONS AND SMALL WIRING PROTECTION OF STRUCTURES AGAINST LIGHTNING

BRITISH STANDARD
1. BS 142-1953 2. BS 158-1961

3. BS CP 326.101-1948

29

4. BS 358-1960 5. BS 775-1956

6. BS 923-1940 7. BS 1433-1964 8. BS 3288-1960

9. BS 3297-1960

METHOD FOR THE MEASUREMENT OF VOLTAGE WITH SPHERE GAPS CONTACTORS WHEN SUPPLIED SEPARATELY OR IN COMBINATION WITH OTHER GEAR IMPULSE VOLTAGE TESTING SPECIFICATION FOR COPPER ELECTRICAL PURPOSES ROD AND BAR SPECIFICATION FOR INSULATOR AND CONDUCTOR FITTINGS FOR OVERHEAD POWER LINES PERFORMANCE AND GENERAL REQUIREMENTS SPECIFICATION FOR HIGH VOLTAGE POST INSULATORS : : : :

.
1. . 64-2517 2. . 227-2525 3. . 279-2525 4. . 280-2529 5. . 291-2522 6. . 326-2525 7. . 332-2529

30

8. . 354-2528 9. . 355-2523 10. . 384-2524 11. . 454-2526 12. . 563-2528 13. . 772-2531 14. . 867-2532 15. . 909-2532 16. . 1039-2534 17. . 1077-2535 18. . 1251-2537

: : : :