Scribd
Upload
51 views1 page

LabS2 RIP Ver2

This document outlines tasks for configuring RIP routing on a router including calculating VLSM, propagating a default route, configuring passive interfaces, aggregating routes, and setting MD5 authentication with the key "bkacad". It also lists commands to verify and troubleshoot the RIP configuration by showing running configuration, routing protocols, routes, RIP database, and debugging RIP. The document is from the Bach Khoa Institute of Information Technology and provides their website.

Uploaded by

Triệu Hồng Biên
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views1 page

LabS2 RIP Ver2

This document outlines tasks for configuring RIP routing on a router including calculating VLSM, propagating a default route, configuring passive interfaces, aggregating routes, and setting MD5 authentication with the key "bkacad". It also lists commands to verify and troubleshoot the RIP configuration by showing running configuration, routing protocols, routes, RIP database, and debugging RIP. The document is from the Bach Khoa Institute of Information Technology and provides their website.

Uploaded by

Triệu Hồng Biên
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

LabS2-RIP ver2

Tasks:
1. 2. 3. 4. 5. Calculate VLSM Propagate the default route Configure passive interface Aggregate routes MD5 authentication: Key=1 Key-string=bkacad 6. Verify and troubleshoot: Show running-config Show ip protocols Show ip route Show ip rip database Debug ip rip ....

Hc vin Cng ngh thng tin Bch Khoa - W ebsite: www.bkacad.com

You might also like