Scribd
Upload
89 views2 pages

ISO Paper Sizes - Plus Rounded Inch Values

The document defines the standard paper sizes in the A, B, and C series according to the International Organization for Standardization (ISO). Each series contains 10 paper sizes defined by their dimensions in millimeters and rounded inches. The tolerances specified in the standard are ±1.5 mm for dimensions up to 150 mm, ±2 mm for lengths from 150 to 600 mm, and ±3 mm for dimensions above 600 mm.

Uploaded by

Deepak Kumar Rajak
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
89 views2 pages

ISO Paper Sizes - Plus Rounded Inch Values

The document defines the standard paper sizes in the A, B, and C series according to the International Organization for Standardization (ISO). Each series contains 10 paper sizes defined by their dimensions in millimeters and rounded inches. The tolerances specified in the standard are ±1.5 mm for dimensions up to 150 mm, ±2 mm for lengths from 150 to 600 mm, and ±3 mm for dimensions above 600 mm.

Uploaded by

Deepak Kumar Rajak
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ISO paper sizes (plus rounded inch values)

Format

Size

A series

mm mm

in in

B series

mm mm

in in

C series

mm mm

in in

841 1189 33.11 46.81 1000 1414 39.37 55.67 917 1297 36.10 51.06

594 841 23.39 33.11 707 1000 27.83 39.37 648 917 25.51 36.10

420 594 16.54 23.39 500 707

19.69 27.83 458 648 18.03 25.51

297 420 11.69 16.54 353 500

13.90 19.69 324 458 12.76 18.03

210 297 8.27 11.69 250 353

9.84 13.90 229 324 9.02 12.76

148 210 5.83 8.27

176 250

6.93 9.84

162 229 6.38 9.02

105 148 4.13 5.83

125 176

4.92 6.93

114 162 4.49 6.38

74 105

2.91 4.13

88 125

3.46 4.92

81 114

3.19 4.49

52 74

2.05 2.91

62 88

2.44 3.46

57 81

2.24 3.19

37 52

1.46 2.05

44 62

1.73 2.44

40 57

1.57 2.24

10

26 37

1.02 1.46

31 44

1.22 1.73

28 40

1.10 1.57

www.earnrupees4you.com

The tolerances specified in the standard are

1.5 mm (0.06 in) for dimensions up to 150 mm (5.9 in),

2 mm (0.08 in) for lengths in the range 150 to 600 mm (5.9 to 23.6 in) and

3 mm (0.12 in) for any dimension above 600 mm (23.6 in).

www.earnrupees4you.com

You might also like