Scribd
Upload
68 views3 pages

As 1

1. The document contains an analog circuits assignment with 11 questions on BJT transistor circuits and concepts. It includes questions on explaining the working of an npn transistor, calculating currents using the Eber-Moll model, comparing BJT configurations, determining voltages and currents in circuits, modeling circuits using small signal models, discussing internal transistor capacitances, and explaining short concepts like operating point and early/miller effects. Diagrams of circuits are provided for questions requiring analysis.

Uploaded by

Sai Sarath
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
68 views3 pages

As 1

1. The document contains an analog circuits assignment with 11 questions on BJT transistor circuits and concepts. It includes questions on explaining the working of an npn transistor, calculating currents using the Eber-Moll model, comparing BJT configurations, determining voltages and currents in circuits, modeling circuits using small signal models, discussing internal transistor capacitances, and explaining short concepts like operating point and early/miller effects. Diagrams of circuits are provided for questions requiring analysis.

Uploaded by

Sai Sarath
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Analog Circuits Assignment_1

1. Explain the working of npn transistor with showing the current directions. A npn transistor V
BE

=0.7V at iC = 1ma, find VBE at iC = 0.1ma and 10ma.


B

2. Evaluate the current equations for i transistor having Is = 10


-11

, i E & i C from the Eber-Moll model. For a pnp

A and =100. Calculate VEB for iC= 1.5 A

3. Compare the features of three configuration of BJT (CB, CC, CE). Discuss the different working mode of transistor with their applications. 4. For the fig. (1) V
E

is -0.7V, if =100, find out IB, IE and IC. , assuming =50 and 75. , re, and IE.

5. Explain the V-I characteristic of CE configuration with clear diagram. 6. For the given fig. (2) find the value of I
C

7. For the fig. (3) determine the voltages at all nodes and the currents trough all branches. ( = 0.99) 8. Realize the circuit given in fig.(4) with small signal model and find V
C

9. Discuss the internal capacitances of BJT. Find Cde, Cje, C, C and fT for a BJT amplifier at IC =1mA and CBJ reverse bias 2V. The device has F = 20ps, Cjeo = 20fF, Co=20fF, Voe=0.9V, Voc=0.5V and mCBJ =0.33. 10. Make the high frequency hybrid- model .Explain the high frequency response CE amplifier with its figure of merit. 11. Write short notes on, a. Operating point or Q-point & Load line b. Transconductance c. Early Effect & Miller Effect d. 3dB frequency e. Majority & Minority Carriers f. Trivalent and Pentavalent Impurities g. Unipolar & Bipolar Devices

Note: Submission date: 22.09.11. Do not copy blindly. After submission all are supposed to know everything written in the assignment. I may call anybody in the class to solve any problem on the whiteboard.

Fig. (1)

Fig. (2)

Fig. (3)

Fig. (4)

You might also like