Scribd
Upload
63 views1 page

Basic Router Configuration

This document configures a router by setting the hostname, enabling secret password, disabling domain name lookup, configuring an IP address for interface FastEthernet 4, setting console and vty passwords, enabling login for those lines, setting exec timeout values, and adding a static route.

Uploaded by

Ja Anu
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
63 views1 page

Basic Router Configuration

This document configures a router by setting the hostname, enabling secret password, disabling domain name lookup, configuring an IP address for interface FastEthernet 4, setting console and vty passwords, enabling login for those lines, setting exec timeout values, and adding a static route.

Uploaded by

Ja Anu
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Router> enable

Router# configure terminal


Router(config)# hostname Router
Router(config)#
Router(config)# enable secret cr1ny5ho
Router(config)#
Router(config)# no ip domain-lookup
Router(config)#
Router(config)# interface fastethernet 4
Router(config-if)#
Router(config-if)# ip address 192.1.12.2
255.255.255.0
Router(config-if)#
Router(config-if)# no shutdown
Router(config-if)#
Router(config-if)# exit
Router(config)#
line aux console tty vty(line-number
ExampIe:
Router(config)# line console 0
Router(config-line)#
Router(config-line)# password 5dr4Hepw3
Router(config-line)#
Router(config-line)# login
Router(config-line)#
Router(config-line)# exec-timeout 5 30
Router(config-line)#
Router(config-line)# exit
Router (config)#
Router(config)# line vty 0 4
Router(config-line)#
Router(config-line)# password aldf2ad1
Router(config-line)#
Router(config-line)# login
Router(config-line)#
Router(config-line)# end
Router#
Router(config)# ip route 192.168.0.0
255.255.0.0 10.10.10.2
Router(config)#

You might also like