Codes For All Phones
Codes For All Phones
Codes For All Phones
CODES DESCRIPTIONS
_____________________________________________________
_____________________
SIEMENS:
MODELS CODES & DESCRIPTIONS
*#0003*(secret code 8 digits)# All Siemens Phones: Service
Provider Unlock
Siemens S25/C25
SP unlock *#0003*(secret code 8 digits)#
Show IMEI code: * # 06 #
Resets language to automatic selection : * # 0000 # then Green
button
Pin Out
Data Cable schematics
Phone's connector pin-out:
1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO
Siemens S1/S3/S3 Com
To view the software date and else with S3 com, S4, S4Power,
Sony cmdx 1000e press with SIM removed *#06# and left softkey.
To view some other stuff with S4Power, Sony cmdx 1000e press
with SIM removed *#06# and left softkey twice.
To view the software date with S3 com, S4, S4Power, Sony cmdx
1000e press with SIM installed menu 98 and left softkey twice.
ACTIVATE MONITOR MODE
Siemens S1/S3
Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button
(left MENU key), 5553756, Hang-Up Button (Red Handset key)
Siemens S3 COM/S4:
Pressing the right Display Button when in monitor mode will show
a list of the six cells with the strongest signals.
C1+ How long before phone does forced hand over. (see RX and
RXAM)
dB: 33 31 29 27 25 23 21 19 17 15 13
% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6
Siemens S1/S3:
Here's a trick to play Tetris, also known as Klotz on a Siemens S1.
Turn the phone on. Enter PIN. Before the telephone has logged in
to the your GSM net do the following steps.
1: Choose F 9 (function settings)
2: Choose send own number and push the right button for choose.
3: Push 9
USE 2 as < and 8 as > , rotate the klotz with 5 and drop with 4.
[I have just heard from one of the programmers of the phone that
Tetris was in the phone during development, but it was removed
before it was produced. Apparently someone has the patent on
games in mobile phones and Siemens didn't want to pay the
licensing fees. It was either in Menu F-9-9 or it's not there at all.]
Siemens S3 Comfort
MONITOR MODE:
The Siemens S3 Com series have a Monitor mode that can be
activated directly from the standard user keypad. In order to
activate this mode, you must enter the special access code
currently programmed into the phone.
TO ACTIVATE MONITOR MODE:
Turn the phone on.
Enter the PIN access code on press OK. (Only if is enabled).
Press Menu. (Left top button).
Press 9. (Phone Options).
Press 8. (Phone Status) (May be button 7 in some phones).
You may see your IMEI Number
Left Display Button (Top left MENU key).
7684666
Hang-Up Button. (Red Handset key).
--------------------
CH Channel Number
RX Signal Strength (dB)
N NCC (Color Code)
B BCC (Color Code)
CI Cell ID (in Hex)
C1+ how long before phone does forced hand over. (see RX and
RXAM)
LAI Location Area Identity. Display Network ID code (42F010 =
240.01) and MSC
TXPWR Transmit Power (dB)
RXAM Reeceive signal strength cut-off point
TS* Time Slot Number
TA* Timing Advance. Distance from tower in Km X 2
PL* Power Level
Power Table
PL: 5 6 7 8 9 10 11 12 13 14 15
dB: 33 31 29 27 25 23 21 19 17 15 13
Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02
Siemens S6/S10:
Press * -> # -> 7 -> 4 -> 3 -> 6 -> 3 -> 6 -> 7 -> * -> 8 -> 3 ->
7 -> 8 -> # ,press clear key to clear screen and return to
stand-by mode
press Menu, it will show additional menu
Menu 3.3.4 Band selection,
Menu 3.3.4.1 Automatic band selection,
Menu 3.3.4.2 select GSM 900 only,
Menu 3.3.4.3 select GSM 1800 only,
Menu 10 Engineering,
Menu 10.1 MS info,
Menu 10.1.1 MS info on, then on the screen show these, for
example:
FCN RXL C1 C2
642 011+11+91 -> PAGE 1
CID DSC CB
11211 045 000 -> PAGE 2
BCC NCC TN
000 002 00 -> PAGE 3
ATa APa Hn Hf
001 000 05 00 -> PAGE 5
DTU DTD HP CI
+ ? - - -> PAGE 6
MM CC RR
IdNS Nul Idl -> PAGE 7
_____________________________________________________
_____________________
PANASONIC:
CODES DESCRIPTIONS
*#06# For checking the International Mobile Equipment Identity
(IMEI Number)
_____________________________________________________
_____________________
MOTOROLA:
CODES DESCRIPTIONS
*#06# For checking the International Mobile Equipment Identity
(IMEI Number)
[][][] 119 [] 1 [] Activate Enhanced Full Rate Codec (EFR) - Your
phone uses the best sound quality but talk time is reduced my
approx. 5%
[][][] 119 [] 0 [] Deactivate Enhanced Full Rate Codec (EFR)
_____________________________________________________
_____________________
ERICSSON:
CODES DESCRIPTIONS
*#06# For checking the International Mobile Equipment Identity
(IMEI Number)
Shortcuts:
Save a Missed Call into your phone directory Scroll to "Missed
Call", press "Yes" to display the required number. Press any
number (i.e. 0 to 9), then press "clear" once to clear that number,
then press & hold "<" until you see "Store". Press "Yes"
Hide your number when calling when you don't want the other
party to know your number) After dialling the required number &
before pressing "Yes", press ">" twice to choose "Hide Id?" & then
press "Yes". Also works for pre-programmed & last dialled
numbers just press "No" & wait for the number to appear on the
screen first then follow same procedure
Check you battery level when phone is off Press "No" quickly one
time & wait for the battery meter to show up!
Save a number into your phone memory (not SIM card) Follow
normal procedures to store a phone number. When prompted to set
a storage position, press "#" once & key in desired location, or
press "#" twice for next available position
Call a phone number from SMS message You can call from within
a SMS message if the phone number is written in it. Just scroll the
message until the phone number appears on the display, then press
"Yes" to call.
: NOKIA ::.
(12) *#147# (vodafone) this lets you know who called you
last.
Ericsson T20
Displays :
1] Info service
1] Info SW
2] Info hardware
3] SIMlock
4]setup
2] Service setup
1] Contrast
3]Service Test
1] Display
2]Leds
3]Keyboard
4] ringer
5] Vibration
6]Headset
7] Microphone
8]Clock
4] Names List
MENU info
[Type] >*<<**<
Network and Subnetwork : NCK and NSCK
Ericsson T28
>*<<*<* menu Tecnichal info
SW vers. and name list
>*<<**< menu Personal Info
Network and Subnetwork : NCK and NSCK
< and > are the right and left menu's keys
Ericsson T18s/T10/A1018s
>*<<*<* software
CXC125065 Internal product code
PRG
970715 1515 Software version and SW rev.
<* CLR <><**
>*<<*<*> Displays texts and messages in the phone
It will be displayed " TEXT " then push YES
< and > are the right and left menu's keys
!!!><**
Control /Enable SIM Lock!!!
Ericsson R310
Technical Info : >*<<*<*
Options :
1) service Info
info Software
Simlock
Configuration
2) Service Test
Display
Led/Illumination
Keyboard
ringer
Vibration
Headset
Microphone
Clock
*#06# IMEI
*#2558# time of network connection ( D/H/M )
*#2562# Fores reconnection to network
!!!*#7489# Dispalys and modify phones' security code!!!
!!!*#3377# SIM lock information !!!
*#7378# SIM card Informations : supported phase name
and tipe
*#7693# Enable/disable "Sleep Mode"
*#8463# State of "Sleep Mode"
*#2255# Debug Call Mode enable/disable
*#3333*# Displays the blocking list.
*#7489*# Displays the security code
*#06# Displays the IMEI number
*#8377*# Displays the SW info.
1 APPLI
VERSION ( SW)
BATTERY (voltage )
2 PROM (IMEI)
3!!! SIM LOCK (10 digits code requested ) !!!
4- NETWORK (returns : OPTION NOT AVAILABLE)
5- TEST LCD
SYMBOL 1 (LCD)
SYMBOL 2 (test2 LCD)
BLACK (all icons and carachters displayed )
FOR PHOTO (welcome message and time )
VIBRATOR (vibration test )
!!! Sim Lock [10 digits code ] ( it could harm your phone )
NETWORK : OPTION NOT AVAILABLE
Test LCD: display test of the green/red leds and vibration
Push * and type 4329 :enables/disables network monitor 1
(the same of MT35)
Push * and type 621342 :enables/disables network monitor
2
Push * and type 5807 : Serial Number Software Vers.
Push * and type 936505: IMEI -- Software Vers.
TPush * and type 547 : Test serial Data Cable DISPLAYS
:"Testmode"
Push * and type 362628: ISMI BLOCK (UNKNOWN)
Push * and type 476989: NS BLOCK (UNKNOWN)
Push * and type 482896:CP BLOCK (UNKNOWN)
Push * and type 787090: ? BLOCK (UNKNOWN)
Push * and type 787292 : block current network
!!! Push * and type 967678: SP LOCK!!!
Push * and type 850696:Warm Start
( ENABLE/DISABLE)
Push * and type 3926 : Swicth off phone
Push * and type 5806: Production date and SW version
.:: Motorola ::.
Motorola V3688
IMEI *#06#
Enhanced Full Rate Codec EFR
Enable EFR : [][][] 119 [] 1 [] OK.
disable EFR : [][][] 119 [] 0 [] OK
.:: Tips and Tricks ::.
Send an E-mail from your GSM
From your telephone you can send an email to whichever
E-mail customer of the Internet network.
V 3.14 28/11/97
V4.33 11/03/98
V 4.73 22/04/98
V 5.24 14/9/98
This Trick is for you how want to hear more then your
supposed to !
If you short-circuit the left and the right contact with the
middle contact ("3", "6" and "9") the Nokia Software
hangs! The profile "Headset" will be activated. Before you
do this, just active the "auto call receive" function in the
headphone profile and set the ringing volume to "mute"
Now you can use your phone for checking out what people
are talking about in a room. Place the phone somewhere
stratidic and call your phone! The phone receives the call
without ringing and you can listen to what people are
talking about! .....gr8...
Serial numbers on your 6110
For more info type: *#92702689#
The first screen gives you the serial and IMEI number.
Then there is the Date of Manufacture: ex. Made 1297
Then there is the Purchasing Date: ex. Purchasing Date
0298
Then there is the last Repair Date: ex. Repaired: 0000
Note: you must turn off the phone to exit after this test,
because of the last function, "transfer user data" which
doesn't work as "standard"....You can use this mode only to
transfer all Calender, Profile and Callers Group Information
to another phone (eg. if you are replacing phone or
configuring phones for use within your company or when a
particular phone doesn't works correctly )
Now look at the battery contacts, the two outer ones supply
power to the phone, the center contact is an "extra" ground.
This ground needs to be shorted to the test mode connector
on the phone. The easiest way to do this is to put a small
piece of solder wick, wire, aluminum foil or any other
conductive material into the recess on the phone. Having
done this carefully replace the battery and turn on the
power, if you have been successful the phone will wake up
in test mode.
NOTES:
Take care with Motorola's use of "0" and "1". Some options
use "0" to enable, some use "1".
LOCK/UNLOCK PROCEDURES:
GENERAL NOTES:
and: A B C D E F G where:
Carrier = OFF
Receive Audio = MUTED
Transmit Audio = MUTED
Signaling Tone = OFF
Call Timer RESET and peroiodic resetting ENABLED
SAT = OFF
DTMF & Audio Tones = OFF
Audio Path = To SPEAKER
Code:
www.mig33.com
---------------------------
---------------------------
---------------------------
Cheap Phone
Calls & SMS
It's more than just cheap calls, we also give you cheap SMS
(AUD$0.10) to over 200 networks around the world.
---------------------------
You can also share your credits with other users. Simply
open your account balance in mig33, and select 'Transfer
credit' to push credits to other users. Now you and your
friends can recharge your account once and share your
credits around.
---------------------------
Requirements
JAVA midp1.0 mobile phone with GPRS or WAP enabled
Compatible Devices
Motorola A1000
Motorola A920
Motorola A925
Nokia 3230
Nokia 3600
Nokia 3620
Nokia 3650
Nokia 3660
Nokia 6260
Nokia 6600
Nokia 6620
Nokia 6630
Nokia 6670
Nokia 6680
Nokia 6681
Nokia 6682
Nokia 7610
Nokia 7650
Nokia 7710
Nokia 9200 Series Communicator
Nokia 9210 Communicator
Nokia 9290 Communicator
Nokia 9300
Nokia 9500
Nokia N-Gage
Nokia N70
Nokia N90
Nokia N91 (S60 3rd Edition)
Nokia Series 60
Sony Ericsson P800
Sony Ericsson P900
Sony Ericsson P910
GSM TRAINER
The GSM module (Global System for Mobile communication) F 35 is a
mobile station for transmission of voice and data calls as well as short
messages (SMS- Short Message Service) in GSM Network.
- EVAL-Board
- Adapter PCB for A2D or F35 called adapter
- Adapter PCB for CM2C or CM35 called CM adapter
- Wall mount power adapter
- 9-pin serial cable (pin to pin direct, male to female)
- GSM antenna (900/1800) and cable (30cm) with coaxial plug
- coaxial adapter MMCX - FME
- coaxial adapter MCCard - FME
- Head-set with RJ-45 plug
- Set of connectors (see appendix for details)
- 2 pieces 40-pin stacking connector (plug and socket)
- 2 pieces coaxial antenna plug (plug and socket)
- 2 pieces 15-pin cable connector (plug and socket)
- 2 pieces external SIM card reader
- 3 pieces short circuit bridges
- 4 pieces mounting clamps
- 4 pieces dowel
- CD
- “A2D-Testsoftware”
2) COMPONENT STUDY
Understanding the concept of RF component & different parts which is related to
RF environment like GSM 900/1800 dual band antenna,RF module & various
connectors & evaluation board etc.
3) RF ENVIRONMENT
Understanding RF environment & study of GSM network by actually connecting
to the GSM environment by any service provider SIM like Airtel, Idea, RPG etc.
• Theory manual
• Operating manual
• FAQ & application manual
• GSM glossary & used abbreviations
• Complete evaluation kit
• Power point presentation on GSM.