Scribd
Upload
34 views2 pages

Aero Dynamic Wind Mill With Reverse Charge Protection For Rural Power Generation Applications

This document describes an aero dynamic wind mill that uses reverse charge protection for rural power generation. The wind mill converts the kinetic energy of wind into mechanical energy through wind blades connected to a DC geared motor shaft. This motor output is fed into a reverse polarity preventer that automatically corrects polarity depending on wind blade movement. The output is used to charge a 12V DC rechargeable battery, which then powers an inverter converting DC to 230V AC to power loads. Increasing the battery and inverter capacity can increase the power rating of the system for rural electrification applications.

Uploaded by

roopavennela
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
34 views2 pages

Aero Dynamic Wind Mill With Reverse Charge Protection For Rural Power Generation Applications

This document describes an aero dynamic wind mill that uses reverse charge protection for rural power generation. The wind mill converts the kinetic energy of wind into mechanical energy through wind blades connected to a DC geared motor shaft. This motor output is fed into a reverse polarity preventer that automatically corrects polarity depending on wind blade movement. The output is used to charge a 12V DC rechargeable battery, which then powers an inverter converting DC to 230V AC to power loads. Increasing the battery and inverter capacity can increase the power rating of the system for rural electrification applications.

Uploaded by

roopavennela
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

AERO DYNAMIC WIND MILL WITH REVERSE CHARGE PROTECTION FOR RURAL POWER GENERATION APPLICATIONS

ABSTRACT: Energy is a major input for overall socio-economic development of any society. Wind energy is the fastest growing renewable energy. From centuries man has been trying to convert wind power to mechanical &, more recently, electric power. Wind technology has improved significantly over the past two decades, and wind energy has become increasingly competitive with other power generation options. Wind power has negligible fuel costs. A key challenge for wind energy is that electricity production depends on when winds blow rather than when consumers need power. The amount of electricity generated from wind has been growing rapidly in recent years. The power in the wind can be computed by using the concepts of kinetics. The wind mill works on the principle of converting kinetic energy of the wind to mechanical energy. The power available in the wind increases rapidly with the speed hence wind energy conversion machines should be located preferable in areas where the winds are strong & persistent. This project is designed by using an aero dynamic wind blade arrangement which is connected to the shaft of the dc geared motor such that its output is given to the Reverse polarity preventer cum polarity corrector. Depending upon the movement of the wind blade (clock wise / anti clock wise) the polarity can be corrected automatically which is given as an input supply to the 12V DC rechargeable battery. The o/p of this lead acid battery is given as input to the inverter which drives the AC loads. The battery is connected to the inverter. This inverter is used to convert the 12 Volt D.C to the 230 Volt A.C. This 230 Volt A.C voltage is used to activate the loads. Here we are also using Conventional Battery Charger Unit to recharge the battery. The output of wind turbine is given to 12V 1.3 Amp-Hour Lead-acid Battery. The

Takeoff Group, 526, 2nd floor, Near Andhra Bank Street, Balaji Colony, Tirupathi. Ph: 0877 2261612, 9298558048.

battery is connected to the inverter which is used to convert the D.C 12 Volt to the 230 Volt A.C. By increasing the capacity of battery and inverter circuit, the power rating is increased

Takeoff Group, 526, 2nd floor, Near Andhra Bank Street, Balaji Colony, Tirupathi. Ph: 0877 2261612, 9298558048.

You might also like