Scribd
Upload
57 views2 pages

Wireless Digital Codelock System

RF control system includes RF transmitter and receiver ckt. RF TX and RX working with 433mhz Freq. Which can covers around 700 sq.ft. Area. If user typed code is matched with existing code in IC respective message display on LCD.

Uploaded by

amitrana86
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
57 views2 pages

Wireless Digital Codelock System

RF control system includes RF transmitter and receiver ckt. RF TX and RX working with 433mhz Freq. Which can covers around 700 sq.ft. Area. If user typed code is matched with existing code in IC respective message display on LCD.

Uploaded by

amitrana86
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Wire less Digital Code lock system

Wire less technology used for communication between keypad and Device

RF for wire less communication Software for Control Electronics circuitry for control device RF control System. RF control system includes RF transmitter and Receiver ckt. The Transmitter ckt. Contain RF encoder IC and RF TX Module. RF Receiver CKT contain RF decoder IC and RX Module. RF TX and RX working with 433mhz Freq. which can covers around 700 sq.ft. area. -the system work with OOK modulation. OOK modulation is a very popular modulation used in control applications. This is in part due to its simplicity and low implementation costs. OOK modulation has the advantage of allowing the transmitter to idle during the transmission of a zero, therefore conserving power. The above said system based Micro controller 89c51.

Wireless link RF Encoder Ckt received signal from keypad and appropriate signal transmit by transmitter. Transmitted signal captured by RF receiver and finally decode by RF Decoder. Decoder output goes to microcontroller where as comparison made for code recognition. If user typed code is matched with existing code in IC respective message display on LCD and out put generated for device operation. controller output is not sufficient to drive device. We have to include high voltage Darlington ICs and necessary circuitry to operate respective device

Software designed in KEIL Embedded C is window base programming language. LCD It is supporting 8051 chipset. D E V I C E S

K E Y P A D TX CKT RX Ckt.

Control Unit

D E V I C E

The system useful for Security purpose Industrial,Home,Aggriculture,Hoispital,Bank,Hotel etc.

You might also like