Scribd
Upload
87 views

Tutorial 2 DSP

The document contains 8 questions related to signals and systems: 1. Quantization of a sinusoidal signal using a 6-bit quantizer. 2. Determining if a system is linear. 3. Finding the impulse response of two linear systems. 4. Convolution using graphical, table, and formula methods. 5. Checking if a system is linear, time-invariant, and BIBO stable. 6. Finding the response of a system to an input signal. 7. Determining the input to a system to generate a given output sequence. 8. Questions cover topics like quantization, linearity, impulse response, convolution, stability, and input-

Uploaded by

Neeraj Sharma
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
87 views

Tutorial 2 DSP

The document contains 8 questions related to signals and systems: 1. Quantization of a sinusoidal signal using a 6-bit quantizer. 2. Determining if a system is linear. 3. Finding the impulse response of two linear systems. 4. Convolution using graphical, table, and formula methods. 5. Checking if a system is linear, time-invariant, and BIBO stable. 6. Finding the response of a system to an input signal. 7. Determining the input to a system to generate a given output sequence. 8. Questions cover topics like quantization, linearity, impulse response, convolution, stability, and input-

Uploaded by

Neeraj Sharma
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Tutorial-2 Q1. If the analog signal to be quantized is a sinusoidal waveform, that is X(t)=9.

5sin(2000*t) and if the bipolar quantizer uses 6 bits, determine a. number of quantization levels; b. quantization step size o resolution, assuming that the signal range is from -10 to 10 volts c. the signal power to quantization noise power ratio. Q2. Determine which of the following is a linear system. a. y(n) =5x(n) +2x2(n) b. y(n) =4x3(n-1) -2x(n) Q3. Find the unit-impulse response for each of the following linear system. a. y(n)=.5x(n)-0.5x(n-2); for n>=0,x(-2)=0,x(-1)=0. b. y(n) = -0.8y(n-1) +x(n-1); for n>=0,x(-1) =0,y(-1)=0. Q4. Using the following sequence definitions, 2, fork = 0,1,2 2, fork = 0 h(k ) = 1, fork = 3,4 x(k ) = 1, fork = 1,2 0, elsewhere 0, elsewhere Evaluate the digital convolution a. using the graphical method b. using the table method c. applying the convolution formula directly Q5. The discrete-time system y(n) = ny(n-1) + x(n) n0 is at rest [i.e., y(-1) =0]. Check if the system is linear time invariant and BIBO stable. Q6 Determine the response of the system with impulse response h(n) = anu(n) to the input signal x(n) = u(n) u(n-10) Q8. Consider a system with impulse response

h(n) =

1 n , 0n 4 2 0 , elsewhere

Determine the input x(n) for 0 n 8 that will generate the output sequence y(n) = {1, 2, 2,5, 3, 3, 3, 2, 1, 0, ....}

You might also like