Scribd
Upload
123 views1 page

ELK-M1: Cross Platform Control

The document provides an overview of the components and connections of an ELK-M1 security system. It lists various input and output modules that can be used to expand the system's capabilities for telephone lines, wireless zones, serial connections, Ethernet, powerline, audio, data bus, battery, and outputs. Optional modules are also mentioned for converting voltage outputs to relays or adding proximity readers, keypads, and external devices.

Uploaded by

Tuấn Âm Thanh Hi-end
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
123 views1 page

ELK-M1: Cross Platform Control

The document provides an overview of the components and connections of an ELK-M1 security system. It lists various input and output modules that can be used to expand the system's capabilities for telephone lines, wireless zones, serial connections, Ethernet, powerline, audio, data bus, battery, and outputs. Optional modules are also mentioned for converting voltage outputs to relays or adding proximity readers, keypads, and external devices.

Uploaded by

Tuấn Âm Thanh Hi-end
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Telephone Line Aux Data Bus (J3) Input Zones 1-16

(Expandable to 208 using M1XIN Input Expansion Modules)

Modem Connection for Programming Local/ Remote Telephone Control W035A Wiring Harness Direct Connection for Programming M1XEP Ethernet Interface

Caddx Wireless-up to 48 Zones (NX408E, NX416E, NX448E)

RS-232 Serial Connection

Network Connection for Programming Remote Control using M1 Virtual Keypad

Powerline (X-10) Interface (J5)

ELK-M1
Cross Platform Control
+12VDC Switched Smoke Power Output (1) 1A PTC Protected +12 VDC Auxiliary Power Outputs (3) 1.25A PTC Protected

X-10 Pro, APC, Leviton, Smarthome, Compose, etc.

PSC05 or equivalent

10) 12V 50mA Outputs (J16)

M1RB- Converts Voltage Outputs into SPDT Relay Outputs (Optional)


M1TWM Two Way Listen-in Microphone Only
ELK-SP30 or equivalent Outputs 7, 8, & 9

Output 2 -Siren or Voltage Output


(Outdoor Siren)

Output 1-Voice Output


(Indoor Speaker)
ELK-73 or equivalent

M1TWI Two Way Listen-In Interface


(3 separate zones)

Each zone may have up to 4 speaker/ microphones

Audio Network Interface (J7) 16.5 V AC


ELK-TRG1640 Transformer

M1TWS Two Way Speaker/Microphone

M1DBH Data Bus Hub


(For Applications requiring more than 2 home runs)

RS-485 Data Bus


M1KP M1XIN 16 Zone Input Expander
(Max 12)

Test battery regularly with ELK-BLT Battery Life Tester. Replace every 3-5 years

ELK-1280 12V 8Ah Battery

(up to 16)

M1XOV or M1XOVR Output Expander


(Max 12)

M1XSP Serial Expander or Lighting /Thermostat Interface


(Up to 7)

W035A Wiring Harness 26 Bit Weigand External Proximity Reader or Keypad

M1PR Internal Proximity Reader

M1RB- Converts Voltage Outputs into SPDT Relay Outputs (Optional)

To Serial Device (Thermostat, Lighting Controller, Computer, Etc.)

You might also like