Scribd
Upload
34 views1 page

E-Tth 2

This document provides specifications for a humidity and temperature transmitter that measures and transmits temperature and humidity data. It can measure temperature from -40 to 100 degrees Celsius and humidity from 0 to 100% RH. It has high accuracy of +/-0.3 degrees C for temperature and +/-2% for humidity. It outputs the data as either a 4-20mA current or 0-1V/0-2V voltage signal.

Uploaded by

Michicom Nguyen
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views1 page

E-Tth 2

This document provides specifications for a humidity and temperature transmitter that measures and transmits temperature and humidity data. It can measure temperature from -40 to 100 degrees Celsius and humidity from 0 to 100% RH. It has high accuracy of +/-0.3 degrees C for temperature and +/-2% for humidity. It outputs the data as either a 4-20mA current or 0-1V/0-2V voltage signal.

Uploaded by

Michicom Nguyen
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HUMIDITY / TEMPERATURE TRANSMITTER

FEATURE
Accuracy: Temperature : 0.3 C; Humidity : 2% Current or Voltage output Available Watertight enclosure Low output ripple High stability & low cost

TTH

SPECIFICATION
Measuring Range
Temperature Humidity 0 ~ 50 C 0 ~ 100 C -20 ~ +80 C -40 ~ +60 C 0 ~ 100 %RH

ADJUSTMENT
Output Range
4 ~ 20 mA (2-Wires) Option: 0~1V 0~2V

Load Resistance
(Vs-12) / 20mA (ohm) 50 ohm 50 ohm
HUMI ZERO TEMP ZERO

ZERO: Zero Adjust Pot (Clockwise: o/p increase) SPAN: Span Adjust Pot (Clockwise: o/p increase)

HUMI SPAN

TEMP SPAN

HUMI O/P

TEMP O/P

Accuracy (at 25 C): Sensing Elements: Response time:

Span adjustment: ZeF.S. adjustment: Output ripple: Power Supply: Open circuit pF.S.tection: Operating temperature: Operating relative humidity: Temperature coefficient: Storage temperature: Weight: MECHANICAL: Housing: Tube: Sensor PF.S.tection: Connection:

Temperature: 0.3 C Humidity: 2 %RH Temperature: RTD Pt100, DIN43760 Humidity : Thin-film capacitor Temperature: 10 sec. (10~90%) Humidity:15 sec. ( 90% at 25 in air flow 0.5 M/s) 10% of F.S. 10% of F.S. 0.25% of F.S. DC 16 ~ 36V Upscale > 22mA -40 ~ 85 C (-40 ~ +185 F) immerse parts 0 ~ 100 %RH 0.008 %RH / C (Effect at 0%RH) 0.008 / C (Effect at 28C ) -10~70 About 150g

DIMENSIONS
Wall Mounting Type: Duct Mounting Type:

20 mm max 54 mm

38 mm

77 mm

Tube Length Tube Length

76 mm

871 mm

ABS plastic watertight enclosure (IP65) Dimensions: 20 mm; 100 mm standard; 100 ~ 200 mm specify Sintered filter, Parts no. TR-3066 Liquid-tight nylon, cable bushing: 5-10 mm cable

CONNECTION DIAGRAM
HUMI ZERO TEMP ZERO

HUMI SPAN

TEMP SPAN

HUMI O/P

TEMP O/P

DC Loop Powered

mA

mA

ORDER INFORMATION T Measuring Measuring Type Range


CODE MEASURING TX Temp. HX Humi. TH Temp. & Humi. CODE C D A B N

Output

Mounting

L Length

TEMP. RANGE
0 ~ 50 0 ~ 100 -20 ~ +80 -40 ~ +60 None

CODE OUTPUT RANGE D 4 ~ 20 mA (2-Wires) 2 0~1V 3 0~2V

CODE MOUNTING W Wall Mounting D Duct Mounting S Separated

CODE TUBE LENGTH 10 100 mm 15 150 mm 20 200 mm XX Specify

E-2
CSEC-04/01 CHANG SHUAN ELECTF.S.NICS CO., LTD. TEL: +886 2 29953100 FAX: +886 2 29953101 EMAIL: [email protected]

You might also like