Scribd
Upload
128 views1 page

I Beam

This document contains design input and output for the structural analysis of a beam. It provides the dimensions, properties, and material specifications for a UB 203x133x25 beam. It then lists the design loads, capacities, and failure ratios calculated. The critical design ratio is 0.78 for flexure, indicating the beam is safe based on the calculated failure ratio being less than 1.

Uploaded by

asmerom2011
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
128 views1 page

I Beam

This document contains design input and output for the structural analysis of a beam. It provides the dimensions, properties, and material specifications for a UB 203x133x25 beam. It then lists the design loads, capacities, and failure ratios calculated. The critical design ratio is 0.78 for flexure, indicating the beam is safe based on the calculated failure ratio being less than 1.

Uploaded by

asmerom2011
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1 .

Roof

Axis

B' , beam 4 - 6

section dimensions web width 203 flange width 133 web thk 5.7 flange thk 7.8 H 218.6 Kc A 3231.9

UB 203X133X25 d w tw tf Aw 1157.1 Af 1037.4 Ix 27033382.23 Sx 247331.9509 b/t= 8.52564 95/(fy)^0.5= 13.435 65/(fy)^0.5= 9.19239 b/t= 8.52564 95/Kc(fy)^0.5= 13.435 65/(fy)^0.5= 9.19239 Iy 3061560.948 Sy 46038.5105 Rt WEIGHT 0.025370415 25.370415 kg . M t.M Rx 91.45790212 Ry 30.77814898

1 FLANGE OF ISHAPED ROLLED BEAMS AND CHANNELS IN FLEXURE FLANGE OF ISHAPED WELDED BEAMS IN FLEXURE

COMPACT

35.26237697

COMPACT

Kc= 1

Design input
1. Dead Load kn / sqm beam ( 0.15kn/sqm) 2. Live Load kn / sqm 3. Beam Spacing in m. 4. Beam Length( Span) 5. UNSUPORTED LENGTH 6.Design Capacity fy ( N/sqmm) 7. Beam Load ( LL + DL ) KN/m 8. Beam Ultimate Load ( LL + DL ) KN/m 9. MODULUS OF ELASTICITY E N/ SQ.MM
1. design strength

1.000 1.000 4.150 5.500 1.375 280.000 8.300 12.450 205,000

Failure Ratio

0.78

Design out put == >>

safe

Braced moment capacity about the x - axis

Loads Loads

fixed end Negative moment for continueus beam (W.L.L / 12) free end Maximum load kn/m ( W . L . L / 8)

69.25 kn.m 31.38 47.08 kn.m 17.845 8.922 22.917 15.278


mm mm mm mm

0.45

0.68 0.78 0.58

2.deflection requirementmaximum

deflection all 5/384 WL^4/( I X-X . E)

maximum deflection live 5/384 WL^4/( I X-X . E) deflection LIMIT all L / 240 deflection LIMIT live L / 360
3.FLEXURAL BUCKLING

LE / r = Effective unsuuported L / radius of gyration ( Lamda) Maximum value of slendernes LE / R

44.675 mm 90.000 mm 34.238 kn 542.96 kn

0.50

4.shear

reaction force at the support wl/2 Maximumshear capacity 0.60 x As X fy

0.06

The critical design is for the ratio =

0.78

You might also like