Scribd
Upload
67 views1 page

Assignment 5: Please Solve Both Questions

This document is an assignment for an engineering dynamics course due on July 5th, 2011. It contains two questions to solve: 1) determining the speed of a 50kg crate on a plane when a spring is compressed 1.5m, given a kinetic friction coefficient of 0.2; and 2) determining the speed of a 5kg collar released from rest down a vertical guide to position C, with an unstretched spring length of 300mm. The assignment provides relevant details to solve each problem.

Uploaded by

lakakakakakakakkaka
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
67 views1 page

Assignment 5: Please Solve Both Questions

This document is an assignment for an engineering dynamics course due on July 5th, 2011. It contains two questions to solve: 1) determining the speed of a 50kg crate on a plane when a spring is compressed 1.5m, given a kinetic friction coefficient of 0.2; and 2) determining the speed of a 5kg collar released from rest down a vertical guide to position C, with an unstretched spring length of 300mm. The assignment provides relevant details to solve each problem.

Uploaded by

lakakakakakakakkaka
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ASSIGNMENT 5

EM202 : ENGINEERING DYNAMICS DUE DATE : 05 JULY 2011

PLEASE SOLVE BOTH QUESTIONS

1.

If the coefficient of kinetic friction between the 50kg crate and the plane is k = 0.2, determine the speed of the crate at the instant the compression of the spring is x=1.5m. Initially spring is unstretched and crate is at rest.

2.

The vertical guide is smooth and the 5kg collar is released from rest at A. Determine the speed of the collar when it is at position C. the spring has an unstretched length of 300mm. {Refer Text example 14.11}

Lecturer : Krishnawathy Tutorial : Every Thursday (8.00 9.30) @ K209

Page 1

You might also like