Scribd
Upload
437 views2 pages

De Mister

This document provides specifications for a demister for ONGC/NPCC's Well Platforms Project No. 1. The demister will be used to separate liquids from hydrocarbon gas or lift gas exiting a knock out drum, with an operating pressure of 30-78 kg/cm2 and temperature of 11.37-18.51°C. The demister must achieve a separation efficiency of at least 98% for droplets 10 microns or larger, and allow a maximum pressure drop of 100 MMWC. The demister will be constructed from SS316L stainless steel.

Uploaded by

Laxman G Galipelli
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
437 views2 pages

De Mister

This document provides specifications for a demister for ONGC/NPCC's Well Platforms Project No. 1. The demister will be used to separate liquids from hydrocarbon gas or lift gas exiting a knock out drum, with an operating pressure of 30-78 kg/cm2 and temperature of 11.37-18.51°C. The demister must achieve a separation efficiency of at least 98% for droplets 10 microns or larger, and allow a maximum pressure drop of 100 MMWC. The demister will be constructed from SS316L stainless steel.

Uploaded by

Laxman G Galipelli
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

KILBURN ENGINEERING LTD.

CLIENT ONGC / NPCC

DEMISTER

ITEM N-15-V-440 JOB CONSULTANT KOS- 128 SHEET 2 OF 3 NO. B SERIES AND N15 & N16 06 D.S. PROJECT KOS-128-ME-202 REV. 2 WELL PLATFORMS PROJECT NO. 1 SERVICE KNOCK OUT DRUM 2 FLUID HANDLED HYDROCARBON GAS / LIFT GAS VESSEL ID 3 538 MM OPERATING PRESSURE 4 30 - 78 Kg/cm2 G OPERATING TEMPERATURE 5 11.37- 18.51 C 6 VAPOUR CONDITION AT PRESSURE & TEMPERATURE VAPOUR FLOW RATE 7 104.2 105.6 KG/HR VAPOUR DENSITY 8 29.31 - 86.93 KG/M3 VAPOUR VISCOSITY 9 0.01164 0.01426 CP 10 VAPOUR MOLECULAR WEIGHT 20.20 20.76 11 LIQUID CONDITION AT PRESSURE & TEMPERATURE 12 DROPLET SIZE RANGE MIN. 10 MICRON. LIQUID FLOW RATE 13 25 LPH LIQUID DENSITY 14 519 609.7 KG/M3 LIQUID VISCOSITY 15 0.1280 0.2108 CP SURFACE TENSION 16 8 -12.95 DYNES / CM 17 DEMISTER PERFORMANCE REQUIREMENTS 18 SEPARATION EFFICIENCY 98% LIQUID. 10 MICRON MAX. ALLOWABLE PRESSURE DROP 19 100 MMWC 20 DESIGN DATA DESIGN PRESSURE 21 105 Kg/cm2 G DESIGN TEMPERATURE 22 75 C 23 MATERIAL OF CONSTRUCTION SS316L ( NOTE - 2) 24 REFERENCE EQUIPMENT DATASHEET NUMBER KOS-128-ME-202 Rev.2

NOTES: 1. LIQUID CARRYOVER IN GAS OUTLET OF KNOCK OUT DRUM SHALL BE LESS THAN 13.4 LIT/MMSCM OF GAS. 2. MATERIAL SHALL MEET THE REQUIREMENT OF NACE MR-01-75(ISO 15156) (LATEST) 3. SIZE OF DEMISTER BY VENDOR 4. DIMENSIONAL DRAWINGS SHALL BE PROVIDED

0 REV

APPROVAL DESCRIPTION

DATE

PPDY BY

APD BY

REV

DESCRIPTION

DATE

PPD BY

APD BY

You might also like