Scribd
Upload
148 views1 page

Loads For Rectangular Wave Forms

The document provides specifications for TTL and HCMOS load configurations for testing rectangular waveforms. For TTL loads, it gives the capacitor and resistor values based on the number of loads. For HCMOS loads, it specifies the capacitor and gives a formula for calculating the resistor value based on the number of loads. It references MIL-PRF-55310D for the specifications and provides contact information for Isotemp Research, which manufactures ovenized crystal oscillators.

Uploaded by

isotemp
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
148 views1 page

Loads For Rectangular Wave Forms

The document provides specifications for TTL and HCMOS load configurations for testing rectangular waveforms. For TTL loads, it gives the capacitor and resistor values based on the number of loads. For HCMOS loads, it specifies the capacitor and gives a formula for calculating the resistor value based on the number of loads. It references MIL-PRF-55310D for the specifications and provides contact information for Isotemp Research, which manufactures ovenized crystal oscillators.

Uploaded by

isotemp
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Loads for Rectangular Wave Forms

TTL Load
N C1 R1 R2 Number of Loads ( 2 x N ) pF
C1 includes the test probe and fixture capacitance

( 2640 / N ) ohms ( 60,000 / N ) ohms


MIL-PRF-55310D specifies R1 = 270 ohms and R2 = 6 k ohms for a 10 TTL load and R1 = 430 ohms and R2 = 10 k ohms for a 6 TTL load

All Diodes are 1N3064 or equivalent

HCMOS Load
N C1 R1 Number of Loads ( 10 x N ) pF
C1 includes the test probe and fixture capacitance

( 200,000 / N ) ohms

MIL-PRF-55310D specifies C1 = 20 pF and R1 = 100 k ohms And does not mention the number of loads. The input capacitance for most HCMOS devices is specified at a maximum of 10 pF ISOTEMP uses 10 pF per load.

REFERENCES: MIL-PRF-55310D Military specification for crystal oscillators. U.S. government.

For further information on the specification and application of Ovenized Crystal Oscillators, please contact the sales or engineering staff at Isotemp Research, Inc. For reprints of this article, ask for document number 146-014.

P.O. Box 3389 Charlottesville, VA 22903 USA Voice: (*804) 295-3101 FAX: (*804) 977-1849 * 434 after 6/1/2001 www.isotemp.com Written by Todd S. Tignor, BSEE, V.P. of Engineering ISOTEMP RESEARCH INC. Isotemp Research Inc. is an American company building performance ovens and oscillators since 1968

Page 1 of 1

146-014

You might also like