Scribd
Upload
46 views2 pages

Lab Proposal Print

This document outlines experiments to study the characteristics and behavior of semiconductor devices including PN junction diodes, limiters, clampers, rectifiers, and Zener diodes. The experiments are divided into sections to analyze the I-V characteristics of diodes under forward and reverse bias, diode limiters and clampers with and without bias, half-wave and full-wave rectifiers with capacitive and pi filters, and bridge rectifiers. A final section covers measuring the effects of forward and reverse bias on current in a Zener diode.

Uploaded by

Muhammad Usman Arif
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
46 views2 pages

Lab Proposal Print

This document outlines experiments to study the characteristics and behavior of semiconductor devices including PN junction diodes, limiters, clampers, rectifiers, and Zener diodes. The experiments are divided into sections to analyze the I-V characteristics of diodes under forward and reverse bias, diode limiters and clampers with and without bias, half-wave and full-wave rectifiers with capacitive and pi filters, and bridge rectifiers. A final section covers measuring the effects of forward and reverse bias on current in a Zener diode.

Uploaded by

Muhammad Usman Arif
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Basic Electronic (BS-411) Department of Applied Physics University of Karachi LAB#

EVENING PROGRAM

EXPERIMENT TITILE AND OBJECTIVE

Semiconductor PN junction diode To study and plot the I-V characteristics of a general purpose silicon diode in forward and reverse bias mode. Measure the forward and reverse bias effect on P-N junction diode. Diode as Limiters

i) ii)

Part A: To study the characteristics of Un-biased Diode limiters/clippers of the following types: Series Un-Biased Positive & Negative limiter Parallel Un-Biased Positive & Negative limiter Part B: To study the characteristics of Biased -Diode limiters/clippers of the following types: i) Parallel Biased Double diode Limiter Diode as Clamper

i)

Part A: To study the characteristics of Un-biased Diode limiters/clippers of the following types: Un-Biased Positive & Negative clampers Part B: To study the characteristics of Biased -Diode clampers of the following types: i) Biased positive clamper Biased negative clamper Rectifiers

ii)

To study the response of Half-wave rectifier. To study the response of Full-wave rectifiers Power Supply Filters

3 i)

Part A: To study the characteristics of filtered Half-wave rectifiers: Half-wave rectifiers with capacitive filter Part B: To study the characteristics of filtered Full-wave rectifiers i) ii) Full-wave rectifiers with capacitive filter. Full-wave rectifiers with -filter The Bridge Rectifier and Filter Part A: To study the characteristics of bridge rectifier: i) ii) Bridge rectifiers. Bridge rectifiers with capacitive input -filter ZENER-DIODE CHARACTERISTICS

Part A: To measure the effects of forward and reverse bias on current in a zener diode

Basic Electronic (BS-411) Department of Applied Physics University of Karachi

EVENING PROGRAM

You might also like