Scribd
Upload
191 views4 pages

Laboratorio MPLS L3VPN

This document describes the configuration of an MPLS Layer 3 VPN with two sites (V1 and V2) connected to separate provider edge routers (PE1 and PE2). PE1 and PE2 are connected via provider router P1, with loopback interfaces and point-to-point links defined between all devices. VRFs are configured on the PE routers to isolate routing between the sites. RIP and BGP are used for routing between the customer sites and the provider core.

Uploaded by

stefanosasso
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
191 views4 pages

Laboratorio MPLS L3VPN

This document describes the configuration of an MPLS Layer 3 VPN with two sites (V1 and V2) connected to separate provider edge routers (PE1 and PE2). PE1 and PE2 are connected via provider router P1, with loopback interfaces and point-to-point links defined between all devices. VRFs are configured on the PE routers to isolate routing between the sites. RIP and BGP are used for routing between the customer sites and the provider core.

Uploaded by

stefanosasso
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Laboratorio: MPLS L3VPN

Indirizzamento IP: loopbacks: P1: 10.0.0.1/32 PE1: 10.0.1.1/32 PE2: 10.0.1.2/32 P1 PE1 : 10.1.0.0/30 (.1 - .2) P1 PE2 : 10.2.0.0/30 (.1 - .2) PE1 V1: 192.168.21.0/30 (.1 - .2) PE2 V2: 192.168.22.0/30 (.1 - .2) rete V1: 192.168.101.0/24 rete V2: 192.168.102.0/24

P1
hostname P1 ip cef ! mpls label protocol ldp ! interface Loopback0 ip address 10.0.0.1 255.255.255.255 ! interface FastEthernet0/0 ip address 10.1.0.1 255.255.255.252 duplex auto speed auto mpls ip ! interface FastEthernet0/1 ip address 10.2.0.1 255.255.255.252 duplex auto speed auto mpls ip ! router ospf 1 log-adjacency-changes network 10.0.0.1 0.0.0.0 area 0 network 10.1.0.0 0.0.0.3 area 0 network 10.2.0.0 0.0.0.3 area 0

PE1
hostname PE1 ! ip cef ! ip vrf ClientA rd 999:1

1/4

route-target export 64999:1 route-target import 64999:1 ! mpls label protocol ldp ! interface Loopback0 ip address 10.0.1.1 255.255.255.255 ! interface FastEthernet0/0 ip address 10.1.0.2 255.255.255.252 duplex auto speed auto mpls ip ! interface Serial0/1 no ip address encapsulation frame-relay no keepalive clock rate 64000 ! interface Serial0/1.1 point-to-point ip vrf forwarding ClientA ip address 192.168.21.1 255.255.255.252 frame-relay interface-dlci 101 ! router ospf 1 log-adjacency-changes network 10.0.1.1 0.0.0.0 area 0 network 10.1.0.0 0.0.0.3 area 0 ! router rip version 2 ! address-family ipv4 vrf ClientA redistribute bgp 64999 metric 1 network 192.168.21.0 no auto-summary version 2 exit-address-family ! router bgp 64999 no bgp default ipv4-unicast bgp log-neighbor-changes neighbor 10.0.1.2 remote-as 64999 neighbor 10.0.1.2 update-source Loopback0 ! address-family vpnv4 neighbor 10.0.1.2 activate neighbor 10.0.1.2 send-community extended exit-address-family ! address-family ipv4 vrf ClientA redistribute rip metric 1 no synchronization exit-address-family

PE2
hostname PE2 !

2/4

ip cef ! ip vrf ClientA rd 999:1 route-target export 64999:1 route-target import 64999:1 ! mpls label protocol ldp ! interface Loopback0 ip address 10.0.1.2 255.255.255.255 ! interface FastEthernet0/0 ip address 10.2.0.2 255.255.255.252 duplex auto speed auto mpls ip ! interface Serial0/1 no ip address encapsulation frame-relay no keepalive clock rate 64000 ! interface Serial0/1.1 point-to-point ip vrf forwarding ClientA ip address 192.168.22.1 255.255.255.252 frame-relay interface-dlci 101 ! router ospf 1 log-adjacency-changes network 10.0.1.2 0.0.0.0 area 0 network 10.2.0.0 0.0.0.3 area 0 ! router rip version 2 ! address-family ipv4 vrf ClientA redistribute bgp 64999 metric 1 network 192.168.22.0 no auto-summary version 2 exit-address-family ! router bgp 64999 no bgp default ipv4-unicast bgp log-neighbor-changes neighbor 10.0.1.1 remote-as 64999 neighbor 10.0.1.1 update-source Loopback0 ! address-family vpnv4 neighbor 10.0.1.1 activate neighbor 10.0.1.1 send-community extended exit-address-family ! address-family ipv4 vrf ClientA redistribute rip metric 1 no synchronization exit-address-family

3/4

V1
hostname V1 ! interface FastEthernet0 ip address 192.168.101.254 255.255.255.0 speed auto ! interface Serial0 no ip address encapsulation frame-relay no keepalive ! interface Serial0.1 point-to-point ip address 192.168.21.2 255.255.255.252 frame-relay interface-dlci 101 ! router rip version 2 network 192.168.21.0 network 192.168.101.0 no auto-summary ! ip classless

V2
hostname V2 ! interface FastEthernet0 ip address 192.168.102.254 255.255.255.0 speed auto ! interface Serial0 no ip address encapsulation frame-relay no keepalive ! interface Serial0.1 point-to-point ip address 192.168.22.2 255.255.255.252 frame-relay interface-dlci 101 ! router rip version 2 network 192.168.22.0 network 192.168.102.0 no auto-summary ! ip classless

4/4

You might also like