Autocad For Begginers

Building Your World
Conceptual Design and Visualization with AutoCAD
January 2007
Copyright 2007 Autodesk, Inc.

All Rights Reserved
This publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. AUTODESK, INC., MAKES NO WARRANTY, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS, AND MAKES SUCH MATERIALS AVAILABLE SOLELY ON AN "AS-IS" BASIS. IN NO EVENT SHALL AUTODESK, INC., BE LIABLE TO ANYONE FOR SPECIAL, COLLATERAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF ACQUISITION OR USE OF THESE MATERIALS. THE SOLE AND EXCLUSIVE LIABILITY TO AUTODESK, INC., REGARDLESS OF THE FORM OF ACTION, SHALL NOT EXCEED THE PURCHASE PRICE, IF ANY, OF THE MATERIALS DESCRIBED HEREIN. Autodesk, Inc., reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product at all times in the future.
Autodesk Trademarks
The following are registered trademarks or trademarks of Autodesk, Inc., in the USA and other countries: 3DEC (design/logo), 3December, 3December.com, 3ds Max, ActiveShapes, Actrix, ADI, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Envision, Autodesk Insight, Autodesk Intent, Autodesk Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Can You Imagine, Character Studio, Cinestream, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Create>what's>Next> (design/logo), Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio, Design|Studio (design/logo), Design Your World, Design Your World (design/logo), DWF, DWG, DWG (logo), DWG TrueConvert, DWG TrueView, DXF, EditDV, Education by Design, Extending the Design Team, FBX, Filmbox, FMDesktop, GDX Driver, Gmax, Heads-up Design, Heidi, HOOPS, HumanIK, i-drop, iMOUT, Incinerator, IntroDV, Kaydara, Kaydara (design/logo), LocationLogic, Lustre, Maya, Mechanical Desktop, MotionBuilder, ObjectARX, ObjectDBX, Open Reality, PolarSnap, PortfolioWall, Powered with Autodesk Technology, Productstream, ProjectPoint, Reactor, RealDWG, Real-time Roto, Render Queue, Revit, Showcase, SketchBook, StudioTools, Topobase, Toxik, Visual, Visual Bridge, Visual Construction, Visual Drainage, Visual Hydro, Visual Landscape, Visual Roads, Visual Survey, Visual Syllabus, Visual Toolbox, Visual Tugboat, Visual LISP, Voice Reality, Volo, and Wiretap. The following are registered trademarks or trademarks of Autodesk Canada Co. in the USA and/or Canada and other countries: Backburner, Discreet, Fire, Flame, Flint, Frost, Inferno, Multi-Master Editing, River, Smoke, Sparks, Stone, Wire.
Third-Party Trademarks
All other brand names, product names, or trademarks belong to their respective holders.
Third-Party Software Program Credits

ACIS Copyright 1989-2001 Spatial Corp. Copyright 1999-2000 The Apache Software Foundation. All rights reserved. This product includes software developed by the Apache Software Foundation (http://www.apache.org) subject to its license terms and conditions (http://xml.apache.org/dist/LICENSE.txt). Typefaces from the Bitstream typeface library Copyright 1992. HLM Copyright D-Cubed Ltd. 1996-2006. HLM is a trademark of D-Cubed Ltd. AutoCAD 2008 and AutoCAD LT 2008 are produced under a license of data derived from DIC Color Guide from Dainippon Ink and Chemicals, Inc. Copyright Dainippon Ink and Chemicals, Inc. All rights reserved. DIC and DIC Color Guide are registered trademarks of Dainippon Ink and Chemicals, Inc. Portions of this software are based on the work of the Independent JPEG Group. Active Delivery2.0 1999-2004 Inner Media, Inc. All rights reserved. ISYS and the ISYS logo are registered trademarks or trademarks of ISYSSearch Software Inc Copyright 1988-1997 Sam Leffler. Copyright 1991-1997 Silicon Graphics, Inc. Copyright Lingea s.r.o. 2006. The New Features Workshop contains Macromedia FlashPlayer software by Macromedia, Inc. Copyright 1995-2005 Macromedia, Inc. All rights reserved. Macromedia and Flash are registered trademarks or trademarks of Adobe Systems Incorporated in the United States or other countries. Copyright 1996-2006 Macrovision Corporation. All rights reserved. Copyright 1996-2006 Microsoft Corporation. All rights reserved Copyright 2002 Joseph M. O'Leary. PANTONE Colors displayed in the software application or in the user documentation may not match PANTONE-identified standards. Consult current PANTONE Color Publications for accurate color.
PANTONE and other Pantone, Inc. trademarks are the property of Pantone, Inc. Pantone, Inc., 2004. Pantone, Inc. is the copyright owner of color data and/or software which are licensed to Autodesk, Inc., to distribute for use only in combination with certain Autodesk software products. PANTONE Color Data and/or Software shall not be copied onto another disk or into memory unless as part of the execution of this Autodesk software product. Typefaces from Payne Loving Trust 1992, 1996. All rights reserved. RAL DESIGN RAL, Sankt Augustin, 2004. RAL CLASSIC RAL, Sankt Augustin, 2004. Representation of the RAL Colors is done with the approval of RAL Deutsches Institut fr Gtesicherung und Kennzeichnung e.V. (RAL German Institute for Quality Assurance and Certification, re. Assoc.), D-53757 Sankt Augustin. This product includes code licensed from RSA Security, Inc. http://oss.software.ibm.com/icu4j/. Some portions licensed from IBM are available at
The Sentry Spelling-Checker Engine Copyright 1994-2003 Wintertree Software, Inc. Portions of this product include one or more Boost libraries. Use of the Boost libraries is subject to its license agreement http://www.boost.org/LICENSE_1_0.txt.
GOVERNMENT USE
Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in FAR 12.212 (Commercial Computer Software-Restricted Rights) and DFAR 227.7202 (Rights in Technical Data and Computer Software), as applicable.
iv
Contents
Chapter 1
Welcome and Setup Objectives . . . . Prerequisites . . . Setup . . . . . Drawing File Location
. . . . . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . .
1 2 2 3 3
Chapter 2
Introduction to Solid Models . . . . . . Use Your 2D Drawings to Create Solid Models. . Visualize Your Designs While You Work. . . . Explore Design Alternatives. . . . . . . . Apply Analysis Tools . . . . . . . . . . Present Your Designs . . . . . . . . . View Models in 3D . . . . . . . . . Change Views Dynamically . . . . . . . . Control the Display Properties of Solid Models . . Specify Precise Views. . . . . . . . . . Use the Dashboard . . . . . . . . . . Control the Workplane . . . . . . . Understand the Role of Coordinate Systems . . Work with Other UCS Options . . . . . . Use the Dynamic UCS Feature for Speed . . .
. 5 . 6 . 8 . 9 . 10 . 11
Chapter 3
. 13 . . 14 . . 18 . . 21 . . 24 . 27 . . 28 . . 32 . . 35
Chapter 4
vi Contents
Chapter 5 Create Basic Solids . . . . . . . . . Extrude 2D Objects . . . . . . . . . . Revolve 2D Objects Around an Axis . . . . . Sweep 2D Objects Along a Path . . . . . . . Use Primitives . . . . . . . . . . . . Create Landscaping . . . . . . . . . . . Combine and Modify Solids . . . . . . . Add and Subtract Solids . . . . . . . . . Intersect Extruded Profiles . . . . . . . . Control the Level of Detail . . . . . . . . Use Detail to Control Attention . . . . . . . Put Your Work to Use . . . . Where to Go From Here . . . . . Edit Subobjects and Component Objects Create Sections . . . . . . . . Flatten 3D Views . . . . . . . Calculate Mass Properties . . . . . Walk Through or Fly Over 3D Models . Check for Interferences . . . . . Create Files for Manufacturing . . . Make 3D Solids Transparent . . . . Create Realistic Images for Presentation Final Thoughts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 38 45 49 52 54 57 58 68 74 76 79 80 81 83 85 86 87 89 93 94 96 97
Chapter 6
Chapter 7
Welcome and Setup
Whats inside
Welcome to Building Your World, an exciting introduction to design and visualization with AutoCAD solid modeling! If you have never had time to try solid modeling, or if you have and hope to find some good tips and tricks, youve come to the right place. Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Drawing File Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Chapter 1 Welcome and Setup
Objectives
Building Your World will provide you with important concepts and techniques in solid modeling. The information can be used for conceptual design and visualization in many disciplines, such as architecture, mechanical design, and civil engineering. The objectives of this guide are
To provide a strong foundation in the basics of solid modeling in AutoCAD To present practical information about efficient techniques and common pitfalls of solid
modeling
To provide a learning environment for additional study and experimentation
Prerequisites
This guide is intended for experienced AutoCAD users. To complete the exercises in this guide, you should know how to do the following:

Zoom and pan Specify 2D Cartesian coordinates Use object snaps Create, select, and modify 2D objects Work with layers Create and insert blocks Change system variables at the Command prompt
If you are new to AutoCAD, it is strongly recommended that you complete the Getting Started guide first. The Getting Started guide provides basic information and tutorials about using the program. You can obtain the Getting Started guide in one of the following ways:
If available, use the documentation coupon included in the product package. Purchase a copy from www.autodesk.com. Open the free PDF version of the Getting Started guide that is included on your installation
CD. In the Installation Wizard window, click the Documentation link at the bottom-left of the window to access the PDF. Once you are familiar with AutoCAD, you will be ready for Building Your World.
Setup
Setup
Before you begin working through this guide, start AutoCAD, and then from the Workspaces toolbar, specify the 3D Modeling workspace. The Workspaces toolbar is located at the top-left of the AutoCAD application window by default.
If the Workspaces toolbar is not displayed, right-click any toolbar. Then, on the shortcut menu, click Workspaces. Then select 3D Modeling in the drop-down list. The 3D Modeling workspace consolidates several toolbars and controls into the dashboard for convenient access to commonly used 3D modeling commands and settings.
Create and modify 3D solids
Control the visual display style of a 3D model Control the lighting within a 3D model
Control the materials assigned to 3D solids Control the rendering options for a 3D model
View and navigate within a 3D model
Drawing File Location

This guide includes exercises for you to try the concepts and features that are presented. The drawing files that you need for these exercises are in the \Help\buildyourworld folder, which you will find in the AutoCAD installation folder.
NOTE The drawing files used in the exercises include models that use either metric or imperial
units. While this affects the scale and proportion of the models, it has no significant effect on learning solid modeling. You are now ready to begin exploring the power of 3D solid modeling with AutoCAD.
Introduction to Solid Models
Whats inside
Its easy to create a 3D solid model from a 2D design. When you work with a 3D model, the effects of a design change are much easier to visualize. With a 3D solid model, you can analyze and present your design more effectively. Use Your 2D Drawings to Create Solid Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Visualize Your Designs While You Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Explore Design Alternatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Apply Analysis Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Present Your Designs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 2 Introduction to Solid Models
Use Your 2D Drawings to Create Solid Models

Your drawings are a treasure trove of resources that can be easily reused to create solid models. For example, this 2D library design was extruded into a 3D solid model.
Isometric view
2D drawing
Extruded in 3D Solid models are an excellent tool for visualizing, analyzing, and presenting your designs. Visualizing a chair design is much easier using a solid model than viewing standard orthographic projections.
Use Your 2D Drawings to Create Solid Models

Most of the commands and settings that you already use for 2D drawings are also used to create and modify solid models. For example, these chairs were copied and rotated.
The FILLET command was used to round the inside and outside edges of this plastic box. Midpoint object snaps were used to create a reference line across the opening.
Common operations and tools used in solid modeling include

Move Copy Rotate Fillet Object snaps Polar snap
Chapter 2 Introduction to Solid Models
Visualize Your Designs While You Work

Changing 3D perspectives and views can aid design decisions. Also, you can choose from several visual styles to increase comprehension and reduce the clutter while you create and modify solid models. This kitchen was remodeled to include a new pantry and a peninsula (shown in brown). Several perspectives were used to confirm design decisions.
Explore Design Alternatives 9
Explore Design Alternatives

You can easily modify a solid model. Speeding up and increasing the number of design iterations improves the quality of the design and reduces the probability of expensive design changes late in the process. To enhance performance in archery, this old-style bow sight design was lengthened .
10 Chapter 2 Introduction to Solid Models
Apply Analysis Tools

Solid models can be used for several kinds of analysis. For example, the volume of polyethylene used in this bottle was easily obtained by using the MASSPROP command. As shown in the illustration, you can also create cross sections of a solid model easily. Other tools are available for lighting and shadows. For example, the proposed library for this university campus may cast a significant shadow at certain times of the day during the year.
Present Your Designs 11
Present Your Designs

Solid models can be displayed for effective communication of design intent. Several visual styles and perspectives are at your command. Also walkthroughs and flyovers can be performed and incorporated into animated presentations. The following images of a Japanese-style room design display the predefined visual styles in AutoCAD. Visual styles can also be customized. At the lower-left is a rendered image of the room design.
Realistic visual style
Conceptual visual style
Rendered image
Hidden visual style
Once you create a 3D solid model, it becomes a significant resource for many applications. The following chapters will show you how easy it is to create and modify 3D solids.
12
View Models in 3D
Whats inside
When you work with solid models in 3D, it is essential to become skilled at changing viewpoints and visual styles for clarity and convenience. Change Views Dynamically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Control the Display Properties of Solid Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Specify Precise Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Use the Dashboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
14 Chapter 3 View Models in 3D
Change Views Dynamically

In the following illustrations of a kitchen remodeling plan, a new peninsula, pantry, and trim are shown in brown lines. However, 3D views provide important additional visual information.
New pantry
New trim
New peninsula Plan view of kitchen Front view of kitchen
The 3DORBIT command is the most convenient way to change a 3D view dynamically.
TIP Work in 3D views to select objects easily and to avoid mistakes due to visually overlapping edges.
15
Click and drag along this path
Result
Try it:
1 In the \Help\buildyourworld folder, open the drawing 31 Kitchen.dwg. 2 Click View menu > Orbit > Constrained Orbit. 3 To specify a 3D isometric view, click and drag the cursor along the path shown by the
arrow in the illustration above.
4 Click and drag the cursor several more times for additional viewing angles. 5 Press ESC to exit the command.
As you can see, 3D isometric views result in more complete, but visually complex, views.
TIP It is extremely important to use layers to organize 3D models! Turn unneeded layers off to reduce the number of objects that are displayed at the same time.

Currently, the kitchen is displayed with the 3D Wireframe visual style. You can choose from several visual styles, and you can change from an isometric view to a perspective view.
Try it:
1 Start the 3DORBIT command and right-click to display the shortcut menu. 2 Click Visual Styles > Realistic. 3 Change the view orientation for a better view of the remodeling plan. 4 On the same shortcut menu, click Perspective and try several other viewing angles. 5 Change your location with respect to the kitchen by clicking Other Navigation Modes >
Adjust Distance, and dragging the cursor up to move into the middle of the kitchen.
6 Right-click and then click Other Navigation Modes > Constrained Orbit to view the
kitchen from the middle of the kitchen. Press ESC to exit the command.
7 Click the Layout button near the middle of the status bar at the bottom of the application
window to display a layout with several views of the kitchen.
8 Close the drawing.
Realistic visual style
Perspective turned on
TIP If you need to see only a few objects in a model, select the objects before starting 3D Orbit,
and only the selected objects will be visible during 3D Orbit operations. The next exercise uses a solid model of a connecting rod from an antique sports car.

Try it:
1 In the \Help\buildyourworld folder, open the drawing 32 Conrod.dwg. 2 Click View menu > Orbit > Constrained Orbit. 3 Click and drag to specify 3D views dynamically.
17
4 While still in 3D Orbit, right-click to display the shortcut menu. On the shortcut menu,
click Other Navigation Modes > Continuous Orbit. Click and drag to give the connecting rod a spin!
5 Try changing the visual style and projection from the 3D Orbit shortcut menu. 6 Press ESC to exit the command. 7 Change the color of the 10 SOLID layer. Then repeat the previous steps.
However, you can still access legacy shading options on the command line.
Try it:
1 On the command line,
enter -shademode and specify Gouraud.
2 Repeat to experiment with

the various options. A popular option for creating and editing solids with many sharp edges is Gouraud with Edges.

TIP It is usually easier to create solid models and avoid errors by turning shading on to reduce
the visual clutter in 3D views.
Control the Display Properties of Solid Models

Several system variables affect the display properties of solid models. The primary ones can be changed in the Options dialog box as shown here.
VIEWRES
FACETRES ISOLINES
DISPSILH
After changing any of these settings, use the REGEN command to see the effects.
NOTE For additional graphics display options, click the System tab. Click Performance Settings
and then click Manual Tune. Alternatively, enter 3dconfig on the command line. These options are optimized automatically to your hardware, but you can also control the settings manually.
Control the Display Properties of Solid Models 19

ISOLINES controls the wireframe mesh density of all curved faces in a drawing. This setting applies to wireframe displays of solid models. The default value is 4, but typical values range from 0 to 16 depending on circumstances.
ISOLINES = 4
ISOLINES = 8
VIEWRES (view resolution) controls the smoothness of curved edges and isolines in wireframe displays of solid models. The default setting is 1000, but you can increase the setting even more. After changing the setting for VIEWRES, zoom in and out to see the difference.
VIEWRES = 20
VIEWRES = 100

DISPSILH controls whether the silhouette edges of curved faces are included in wireframe displays of solid models.
TIP You can set ISOLINES to 0 and DISPSILH to 1 as a method of displaying solid models with a minimum number of wireframe display lines.
Silhouette edges
No silhouette edges
DISPSILH = 1 ISOLINES = 0
DISPSILH = 0 ISOLINES = 2
FACETRES (facet resolution) controls the smoothness of curved edges in shaded and rendered displays of solid models. The default setting is 0.5, but many people increase it to at least 2. After changing the setting for FACETRES, use REGEN or RENDER to see the difference.
FACETRES = 0.1
FACETRES = 5
Specify Precise Views 21
Specify Precise Views

You can specify standard orthographic views such as front, right, top, and isometric from the 3D Orbit shortcut menu. Within 3D Orbit, you right-click, and then choose one of the following:

For a front view: Preset Views > Front For a right-side view: Preset Views > Right For a top view: Preset Views > Top For an isometric view: Preset Views > SE Isometric
The illustrated viewing directions are always relative to the world coordinate system (WCS), not the current user coordinate system (UCS). Furthermore, AutoCAD uses the architectural convention that defines the XY plane as the top or plan view rather than the mechanical design convention that defines the XY plane as the front view.
Top (plan) view: projected along the Z axis
Front view: projected along the negative Y axis
0,0,0 (WCS)
Right side view: projected along the X axis

NOTE Preset views are also accessible from the dashboard, the View toolbar, and the View menu. However, choosing a preset orthographic view from these interface elements automatically changes the UCS so that the XY plane is parallel with the plane of your screen. This may not be desirable behavior in 3D modeling.
Try it:
1 In the \Help\buildyourworld folder, open the drawing 33 Stool.dwg. 2 Use the 3DORBIT command to set the viewpoints in the following illustration. 3 After you exit 3D Orbit, click View menu > Zoom > Previous to restore the previous view. 4 Leave the drawing open for now.
Top
SE Isometric
Front
Right
Specify Precise Views 23

TIP Check the fidelity of 3D models with orthographic views. Its very easy to be fooled visually when working in 3D, as shown in the following illustration.
However, the top view reveals that the circle is actually behind the object The circle appears to be on the top face of the object.
Use the Dashboard

The dashboard is a special palette that contains commands and settings for working in 3D. It eliminates the need to display many toolbars and reduces the clutter in the display area. Click to anchor the dashboard
Click to expand or collapse control panel Visual Styles X-ray Mode
Constrained Orbit (a 3D Orbit option)
Parallel Projection Perspective Projection
The dashboard displays automatically when you specify the 3D Modeling workspace. If you close the dashboard, you can redisplay it by clicking Tools menu > Palettes > Dashboard, or you can enter dashboard on the command line.
Try it:
1 If the dashboard is not docked on the side of the application window, dock the dashboard
by dragging the title bar to the right side of the application window.
2 On the docked dashboard, in the upper-left corner, click the [-] button to anchor the
dashboard. This turns on Auto-hide for the dashboard. The dashboard rolls up conveniently to maximize the display area. It is highly recommended to keep the dashboard, the Tool Palettes window, and the Properties palette docked and anchored when you work.
Use the Dashboard 25

3 Move your cursor over the rolled-up dashboard to display it. Click each large control
panel icon to expand or collapse each control panel. For several control panels, an associated tool palette displays automatically.
4 On the dashboard, click Perspective Projection, click the Visual Styles control, and then
click Realistic from the drop-down list. See the previous illustration to help you locate these controls.
5 On the dashboard, click Constrained Orbit. Then click and drag the view in the drawing
area.
6 On the dashboard, click X-ray Mode.

NOTE For best results, make sure that hardware acceleration is turned on. To access this setting, enter 3dconfig on the command line. In the Adaptive Degeneration and Performance Tuning dialog box, click Manual Tune. In the Manual Performance Tuning dialog box, click Enable Hardware Acceleration.
7 Click Constrained Mode. Click and drag the view in the drawing area.
Notice that the hidden edges and object snap locations are now easily accessible.
8 Press ESC to exit 3D Orbit. Close the drawing.
26
Control the Workplane
Whats inside
The XY plane of the user coordinate system (UCS) is called the workplane. For working in 3D, it is essential to become skilled at changing the location and orientation of the UCS. Understand the Role of Coordinate Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Work with Other UCS Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Use the Dynamic UCS Feature for Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
28 Chapter 4 Control the Workplane
Understand the Role of Coordinate Systems

The coordinates of the world coordinate system (WCS) define the location of all objects and the standard views in AutoCAD drawings. However, the world coordinate system is permanent and invisible. It cannot be moved or rotated. AutoCAD provides a movable coordinate system called the user coordinate system, or UCS. To create 3D solid models in AutoCAD, it is essential to become skilled at controlling the location and orientation of the UCS. The following illustration shows a partially designed plastic desk stand. The UCS is currently aligned with the world coordinate system. To construct objects on the face plate of the desk stand, you will need to align the XY plane of the UCSthe workplanewith the face plate.
Try it:
1 In the \Help\buildyourworld folder, open
the drawing 41 Stand.dwg. Notice that the 3D pointer uses the same colors as the UCS to represent the directions of the axes.
2 If the UCS icon is not displayed, click

View menu > Display > UCS Icon, and then click both On and Origin. The Origin option makes the UCS icon appear at its origin (0,0,0) point within the drawing display if possible.
By convention, the X axis is red, the Y
axis is green, and the Z axis is blue

The UCS is represented by a colorful
3D icon visible in 3D views

The UCS is initially coincident with the
world coordinate system

The UCS can be relocated easily to
facilitate construction in 3D
Understand the Role of Coordinate Systems 29

3 For now, make sure that the DUCS (Dynamic UCS) button on the status bar is turned off
(not depressed). You will use this feature later.
4 Click Tools menu > New UCS > 3 Point and specify the following point locations.
4c Specify the orientation of the Y axis at the endpoint of the upper-left corner of the face plate.
4a Specify the new origin point at the endpoint of the lowerleft corner of the face plate.
4b Specify the orientation of the X axis at the endpoint of the lower-right corner of the face plate.
TIP It is very easy to click the wrong vertex on a relatively thin plate as in the previous steps. Use the zoom feature of a wheel mouse to magnify object snap locations that are in close proximity to each other.
The XY plane of the UCS has now been aligned with the face of the desk stand
The origin point (0,0,0) is now located in the bottom-left corner
The XY plane of the UCS is also called the workplane and is useful as a construction plane
In the following example, the rectangles and circle were created on the workplane. These objects can later be converted into solids and combined with the other solids. The objects were created and modified with familiar 2D commands.
Planar objects such as the red construction lines, the rectangles, and the circle are automatically aligned with the workplane
Coordinate values, such as those of the center of the circle, are measured from the new UCS origin
The rectangles were easily rotated in the workplanethe axis of rotation is always parallel to the Z axis of the UCS
The circle and the rectangles can be used later to construct a hole and two slots in the face of the desk stand
Understand the Role of Coordinate Systems 31

Try it:
1 With Polar or Ortho mode turned on, create a 30 mm line from the midpoint of the top
edge of the face plate, as shown in the previous illustration.
2 Create another line that extends 35 mm to the left. 3 Create a circle with a 20 mm diameter centered at the intersection of the two previously
created lines.
4 Create a 35 mm x 5 mm rectangle and rotate it 30 degrees as shown previously. Then

mirror it to create a second rectangle. If you have trouble selecting the rectangle, set the 3DSELECTIONMODE system variable to 0.
TIP You can specify a view of the XY plane of the current UCS with the PLAN command. This command is useful to confirm visually that the location of objects on the workplane is correct.
Try it:
1 Click View menu > 3D Views > Plan View > Current UCS. 2 Return to the previous view. Click View menu > Zoom > Previous.
You can easily return the UCS to be coincident with the world coordinate system. Click Tools menu > New UCS > World.
Work with Other UCS Options

There are several situations where you need to align the Z axis of the UCS to rotate objects. For example, each of the doors on this toy house has a different rotation axis.
Use the ZAxis option of the UCS command to specify the Z axis directly.
Try it:
1 In the \Help\buildyourworld folder, open the drawing 42 Toy House.dwg.
The Z axis is already parallel to the hinge of the green door.
2 Start the ROTATE command, select the door, and specify the endpoint on the lower-left
corner of the door as the base point. Move the pointer to swing the door open.
Work with Other UCS Options
33
3 For the red garage door, click Tools menu > New UCS > Z Axis Vector to align the UCS Z
axis with two endpoints along the outside top edge of the door. Be careful not to snap to the inside edge of the door.
4 To swing the garage door open, start the ROTATE command, select the garage door, and
specify the upper-left corner as the base point. Move the pointer to swing the garage door open.
5 Use the ZAxis option of the UCS to align the Z axis with the side edge of one of the blue
storage doors. This time, instead of moving the pointer to rotate these doors open, you will enter the value for an angle. However, to open the storage doors outward, you need to know whether the rotation angle should be positive or negative. By default, a positive angle means a counterclockwise rotation.

An easy way to remember the rotation direction is to use the right-hand rule for rotation. Point the thumb of your right hand in the direction of the positive UCS Z axis. Your fingers will curl in the positive rotation direction.
NOTE Use your left hand if you set

AutoCAD to interpret a positive angle as a clockwise rotation. Direction of positive Z axis
6 Rotate both blue doors 150 degrees

outward. One of the doors must be rotated 150 degrees, the other one -150 degrees.
7 Keep the drawing open.
Direction of positive rotation angle
TIP It is often useful to rotate the UCS

90 degrees around one of its axes. In this case, use the X, Y, or Z options of the UCS command. Use the right-hand rule to determine whether the rotation should be positive or negative 90 degrees.
Use the Dynamic UCS Feature for Speed 35
Use the Dynamic UCS Feature for Speed

You can align the XY plane of the UCS, the workplane, quickly with the Dynamic UCS feature. When Dynamic UCS is turned on, commands that create planar objects, such as circles, arcs, and lines, automatically align the workplane with any existing plane based on the location of your pointer.
Try it:
1 Click the DUCS (Dynamic UCS) button on the status bar to turn it on.
2 Change the current layer to the 00 REFERENCE layer. 3 Start the CIRCLE command. 4 Move your pointer over several planes on the toy house.
Notice that the workplane aligns with each visible plane as your cursor passes over it. Also notice that the alignment and direction of the X axis depends on the edge of the plane over which your pointer passes and the closest vertex on that edge.
5 Click anywhere in each plane to create circles as shown in the illustration. Notice that
after you exit the circle command, the UCS returns to its previous location automatically.
TIP You can also use the Dynamic UCS feature during the UCS command. This is a fast and
reliable technique to make sure that the XY plane of the UCS is located exactly on the plane that you want to work on.

Try it:
1 Start the UCS command. 2 To orient the X and Y axes as in the following illustration, move your pointer as indicated
by the blue arrow so that it crosses the roof edge near the arrowhead.
3 Click near the vertex to cause the Endpoint object snap to locate the UCS origin at the
vertex. Be careful not to cross another edge with the pointer.
4 Use this technique to locate the UCS with precision on several other planes. 5 Close the drawing file.
NOTE Turn off DUCS when you need to use object snap tracking (OTRACK) or polar tracking (POLAR).
Create Basic Solids
Whats inside
To create basic 3D solid objects, you can extrude closed objects, such as closed 2D polylines, revolve them around an axis, or sweep them along a path. You can also create solids using primitives, which include boxes, cylinders, pyramids, and spheres. Extrude 2D Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Revolve 2D Objects Around an Axis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Sweep 2D Objects Along a Path. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Use Primitives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Create Landscaping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
38 Chapter 5 Create Basic Solids
Extrude 2D Objects
One of the best things about creating solid models with AutoCAD is that you can start with 2D drawings. For example, the floor plan illustrated below was extruded to form a 3D solid model.
Direction of extrusion
House floor plan
Extruded model
After you create basic solids, you can then combine them with other solids to create more complex solids. For example, in the illustration, the window openings were subtracted from the solid walls. How to combine solids will be explained in the next chapter. It is important to become familiar with how to create basic solids first.
Extrude 2D Objects
Try it:
1 Open the drawing 51 Campus.dwg.
39
This is a plan view of part of a university to be used for a massing study for a new library.
2 Use 3D Orbit to obtain an isometric view. Right-click and set the projection style to
Perspective.
3 Locate and zoom into the site for the new library.
Foundation of the proposed library
Notice that the foundation of the building is composed of lines and an arc. To extrude these as a single object, they need to be joined together into a single 2D polyline. To do this, you can use the Join option of the PEDIT command, or you can use the much faster BOUNDARY command.
4 Change the current layer to 32 LIBRARY and zoom into the lines and arc of the library
foundation.
5 Turn off the following layers: 20 CURBS AND WALKWAYS, 21 LANDSCAPE, 30

BUILDINGS, and 31 ATHLETICS.
6 On the command line, enter boundary.

7 In the Boundary Creation dialog box, clear the Island Detection box. Then click Pick
Points and click anywhere within the outline of the library foundation. After the boundary is displayed, press ENTER to end the command. A closed 2D polyline in the shape of the library foundation is created on the current layer, 32 LIBRARY. The original lines and arc are still on the 03 FOUNDATIONS layer to use later if needed.
TIP Turn off unnecessary layers and zoom into the area of the boundary to be created. This
speeds up the operation by reducing the number of objects to be processed. Always make sure that the XY plane of the UCS is in the same plane as the objects to be used to create the boundary.
8 Turn the 03 FOUNDATIONS layer off. 9 Click Draw menu > Modeling > Extrude and select the polyline. Enter 62 as the height
and press ENTER to specify a 0 degree taper angle.
10 Turn the 03 FOUNDATIONS, 20 CURBS AND WALKWAYS, 21 LANDSCAPE, 30

BUILDINGS, and 31 ATHLETICS layers back on.
11 Zoom out to see the overall effect. Keep the drawing file open.
A basic 3D representation of the building is now visible. Note that the 2D polyline was deleted in the process of extruding the building. If you want to retain the 2D objects that generate 3D solids, you can set the DELOBJ system variable to 0 (off).
TIP Solid objects created

from 2D polylines or regions are always created on the current layer, not the layers of the original 2D objects.
Extrude 2D Objects
41
Extrusions dont all have to be upward. It is often useful to extrude objects sideways. This is how the kitchen stove and the stool used in previous illustrations were created.
Direction of extrusion of closed polyline
Kitchen stove from 31 Kitchen.dwg
Direction of extrusion of closed polyline to form the seat
Direction of extrusion of circles to form the base and column
Stool from 33 Stool.dwg

For example, you can create a steel storage building for this campus using this method.
Try it:
1 Zoom in on the existing storage building and delete it. 2 Set the current layer to 30
BUILDINGS. Turn off the layers 10 BASE, 21 LANDSCAPE, and 20 CURBS AND WALKWAYS.
3 On the command line, enter

boundary.
4 In the Boundary Creation dialog

box, clear the Island Detection box. Then click Pick Points and click anywhere within the outline of the storage building profile. After the boundary is displayed, press ENTER to end the command.
Click within this area
5 If necessary, click the DUCS button on the status bar to turn it off. 6 Click Tools menu > New UCS > Z Axis Vector.
Extrude 2D Objects
7 Specify the Z axis of the UCS by clicking two endpoints as illustrated.
43
7b Point on positive Z axis
7a New origin point
8 Select the polyline boundary of the storage building and then rotate it 90 degrees as
illustrated.
8b Rotate 90 degrees
8a Base point

9 Move the polyline boundary into place onto the edge of the building foundation using
object snaps as illustrated.
10 Click Draw menu > Modeling >

Extrude and select the polyline boundary. Enter 105 as the length.
11 Turn the 10 BASE, 21 LANDSCAPE, and

20 CURBS AND WALKWAYS layers back on to see the storage building in context. Turn off the 03 FOUNDATIONS layer, which contains the building footprints in this drawing.

NOTE There may be an additional prompt whether to delete the extruded objects depending on the setting for the DELOBJ system variable.
Revolve 2D Objects Around an Axis 45
Revolve 2D Objects Around an Axis

In addition to extruding 2D polylines, circles, ellipses, and regions in a linear direction, you can also create 3D solid objects by revolving them around an axis. For example, lets say you need a dramatic illustration to advertise a new bicycle rim. You want the result to look like this.
To create the 3D solid, you start with the 2D section of the bike rim. Once you locate the axis of revolution, you can revolve the section up to 360 degrees.
Try it:
1 Open the drawing 52 Bike Rim.dwg. 2 Click Tools menu > Inquiry > Distance and verify the length of the dark blue line. This
line represents the distance between the outside edge of the rim and the red centerline of the hub of the wheel. The radius of the bike rim is 311 mm.
TIP When working in 3D, it is an excellent idea to check coordinates, distances, and lengths
of objects frequently.

3 Click Draw menu > Modeling > Revolve. Select the bike rim section and then specify the
endpoints of the red axis of revolution as illustrated.
First endpoint of the axis
Second endpoint of the axis
4 For the angle of revolution, enter 30 degrees. 5 Turn off the 00 REFERENCE layer. You can turn off the display of the UCS icon by clicking
View menu > Display > UCS Icon, and clearing the On item.
6 Use 3D Orbit to experiment with visual styles, perspective projection, and viewing angles. 7 Close the drawing file.
Revolve 2D Objects Around an Axis 47

In some circumstances, you will need to revolve an object around an axis that is internal to the solid. In this case, you revolve only half the profile around the axis as shown in the following drawing of a glass.
Axis of revolution
Half profile of glass
Result of revolving 360 degrees

Try it:
1 Open the drawing 53 Glass.dwg. 2 Revolve the profile 360 degrees around the endpoints of the centerline of the glass.
Axis of revolution
2a Axis endpoint
2b Axis endpoint 2c Enter 360
TIP Sometimes snapping to an endpoint when you specify an axis involves locating an object
in an area that is densely populated with other objects. Instead of zooming in to the endpoint, you can often save time and avoid errors by using a midpoint object snap instead.
3 Use 3D Orbit to change the visual style and view of the glass. 4 Enter -shademode on the command line and specify Gouraud. Click the X-ray Mode
button on the dashboard. Use 3D Orbit to view the glass.
5 Close the drawing file.
Sweep 2D Objects Along a Path 49
Sweep 2D Objects Along a Path

You can create a solid by sweeping a circle, rectangle, or other closed 2D object along a 2D or 3D path. This is an efficient method to use when you create rails, pipes, tubes, and ducts.
Try it:
1 Open the drawing 54 Chair.dwg. 2 Delete the metal tubes as illustrated.
Delete these tubes
3 Turn on the 00 REFERENCE layer. The defining 2D polylines and circle are now visible. 4 Change the DELOBJ system variable to 0 (off). This setting retains the defining geometry
for the sweep operation that follows.
Circle
Select the 2D polyline as the sweep path
5 Click Draw menu > Modeling > Sweep. Select the circle and press ENTER. 6 Select the sweep path as illustrated. The circle is not deleted.
To create the diagonal brace, you can sweep the same circle along the diagonal polyline. You do not have to align the circle with the path!
Sweep 2D Objects Along a Path 51

7 Repeat the SWEEP command and use a window selection to select the circle (enter w at
the Select Objects prompt). This is necessary because the circle is under the solid tube and cannot be selected directly. Then select the remaining polyline as the path.
Use Window selection to select the circle
Select the 2D polyline
8 Take some time to experiment with sweeping your own closed objects along different
paths.
Use Primitives
A more spatially oriented method of creating solids is to model starting with solid primitives boxes, pyramids, cones, cylinders, and so on.
All of these primitives are listed on the Draw > Modeling menu and on the dashboard in the 3D Modeling workspace. They are easy and intuitive to use.
Use Primitives 53
Try it:
1 Open the drawing 51 Campus.dwg. 2 Zoom into the upper-left corner of the model and use 3D Orbit to display an isometric
view. Some enterprising but mischievous engineering students have dismantled and removed a famous sculpture from its circular pad.
Missing sculpture
You have been commissioned to create a new sculpture in its place.
3 Use solid primitives to make a creative and colorful replacement. Dont forget to change
the orientation of the UCS workplane to orient several primitives.
Create Landscaping
Landscaping presents a special challenge to architectural models. It is not necessary or advisable to model a tree or shrub down to its leaves and twigs. Thus, there are several choices regarding the appropriate type and level of abstraction that you can use. Consider the following:
Landscaping is typically meant to convey an effect or idea without drawing unnecessary
attention to itself and away from the architecture.

3D landscaping can be used to check views and visual interferences. Excessive detail will make a model unnecessarily large and will slow performance. Excessive abstraction will draw attention to unlikely looking landscaping.
The following illustration shows several techniques for creating trees or shrubs.
Lollipop tree Extruded tree, chamfer top
Composite tree
Asterisk trees Extruded tree
Try it:
1 Open the drawing 55 Trees.dwg. 2 Use 3D Orbit to view the tree representations from different angles, including the top. 3 Try creating your own version of a tree. 4 Open the drawing 51 Campus.dwg.
Create Landscaping
5 Zoom into the lower-left corner of the campus model and use 3D Orbit to view the
asterisk trees inserted along the university entrance.
55
These trees were created by tracing an imported image in AutoCAD and then converting the polylines into regions. Four regions were copied and rotated to create an asterisk pattern when viewed from the top. The result was saved as a block.
6 Copy the trees to other locations on campus. 7 Experiment with other styles of trees or make more of your own.
TIP After creating a tree, save it as a block. This reduces the size of a drawing if you insert the
block multiple times.

To create some simple shrubs, you can extrude closed splines.
1 Zoom into the area of the sign that is visible in the lower-left corner of the campus. If
necessary, use 3D Orbit to adjust the viewing angle.
2 Set the current layer to 21 LANDSCAPE. 3 If necessary, open the Properties palette. 4 Using the Properties palette, override the BYLAYER color to a darker shade of green. 5 Click the DUCS button on the status bar to turn on Dynamic UCS. 6 Start the UCS command, click the grass area near the sign, and press ENTER. This locates
the XY plane of the UCS on the surface of the grass.
7 Click the DUCS button on the status bar to turn off Dynamic UCS. 8 Draw several closed splines and extrude them 2 feet to create areas covered by shrubs.
When creating the splines, turn off object snaps and change to a more nearly vertical view. Extruded closed splines
Combine and Modify Solids
Whats inside
To merge 3D solids, you can use Boolean operations such as Union and Subtract. You can create new solids from the intersecting volumes of existing solids, and you can also relocate faces and edges of solids. Add and Subtract Solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Intersect Extruded Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Control the Level of Detail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Use Detail to Control Attention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
58 Chapter 6 Combine and Modify Solids
Add and Subtract Solids

After you create 3D solids, you can join them together with Boolean operations such as Union and Subtract. For example, to create keyhole slots in a panel, you subtract the keyholes from the panel, as shown in the illustrationthe keyholes were extruded a greater distance than necessary to make them easier to see and select.
Original polylines
Extruded solids
Result after subtraction
You can also use Boolean operations to combine several 2D region objects into a single region before extruding them. For example, the rectangles in the following illustrations were first converted into regions and then combined.
Two regions
Union the red and blue regions
Two regions
Subtract the green region from the red region
NOTE Edge and face colors of 2D regions and 3D solids are retained after Boolean operations.
Try it:
1 Open a new drawing and display a 2D plan view. 2 On the command line, enter delobj. Make sure it is set to 1 (on). 3 Create several overlapping closed polylines, rectangles, and circles.
Add and Subtract Solids 59

4 Click Draw menu > Region and select all the objects you created. 5 Press ENTER.
These objects have now been converted into region objects.
6 Click Modify menu > Solid Editing > Union and select two overlapping objects. 7 Click Modify menu > Solid Editing > Subtract. 8 Select another object and press ENTER. 9 Select an overlapping object that you want to subtract from the previously selected object
and press ENTER. Notice that the SUBTRACT command works like the TRIM and EXTEND commands in that they use two selection sets: the objects to keep and the objects to subtract from them. In the following illustration of the Subtract operation, the red and blue regions are selected first. Then the green region is selected to subtract from the first two regions. The result combines the three rectangles into a single region.
Three regions
Result after subtraction
Try it:
1 Create three regions as shown in the illustration. Use RECTANG and then REGION. 2 Click Modify menu > Solid Editing > Subtract. 3 Select two overlapping regions and press ENTER. 4 Select another overlapping region and press ENTER. 5 Try several more examples using circular, rectangular, and polygonal regions. 6 Extrude or revolve the resulting complex region as a single object.
TIP You can create solid models efficiently by combining regions in 2D and then extruding, revolving, or sweeping them in 3D.

The 2D section of a bicycle rim in the previous chapter was created using this method.
Exterior boundary converted into a region with the BOUNDARY command
Interior holes converted into regions and subtracted from the exterior region
The Union and Subtract operations work identically with 3D extrusions and primitives.

Try it:
1 Open the drawing 61 Hall.dwg.
This is the beginning of a gray-colored massing model of a concert hall.
TIP Avoid using index color 7, White, for solids. Objects created with index color 7 display as
black or white depending on the current background color. For white objects, use a True Color setting of 255,255,255 instead.

2 Subtract the top cylinder from the large box.
3 Union the remaining cylinder and the complex solid. 4 Subtract the small box from the complex solid.

5 Undo all your previous steps and see whether you can get the same result with a single
subtract operation.
TIP There are two selection sets in the SUBTRACT command.

There are usually several ways to create any solid model. For example, the couch in the illustration could have been created using primitives and a series of Union operations. It is easier in this case to use a Subtract operation.
Try it:
1 Open the drawing 62 Couch.dwg.
This drawing contains two solids: a box primitive and an extruded trapezoidal polyline.

2 Move the extruded solid onto the box as illustrated, using Midpoint object snaps.
3 On the command line, enter 3dselectionmode and then enter 0. This enables you to
select the object you moved, which is now inside the box primitive.
4 Subtract the extruded solid from the box primitive. After you start the Subtract operation,
select the box, press ENTER, and then select the extruded object. The basic shape of the couch is complete.
5 Before creating the cushions, set the current layer to 20 CUSHION.

6 Create a box using the object snaps shown in the illustration and give the box a height of
150 mm.
7 Set the UCS working plane on the angled face of the couch using the Face option of the
UCS command. Click near the upper-left corner of the couch.
8 Create a box on the working plane starting at the origin point with a length of 815 mm,
a width of negative 330 mm, and a height of 150 mm.

9 Move the box along the Y axis as illustrated. Then return the UCS to its previous (WCS)
location.
Move the box 42 mm in the positive Y direction
10 Turn off layer 10 COUCH. 11 Change the visual style of the couch to 3D Wireframe. Use the FILLET command to round
all 12 edges of each cushion with a fillet radius of 30 mm.
TIP To make sure that the corners of solids blend correctly, select all intersecting edges of
each object in a single FILLET command.
12 Turn layer 10 COUCH back on.

13 Use object snaps to copy the seat and back cushions as illustrated.
14 Turn off layer 20 CUSHION. 15 Round the corners of the couch as illustrated. Use a fillet radius of 30 mm.
TIP Delay filleting and rounding edges until the very end. You will find that sharp edges and
corners are often needed as reference locations to create, move, copy, and mirror other objects.
16 Turn layer 20 CUSHION back on. 17 Change the visual style to Realistic or enter -shademode to specifiy Gouraud. 18 Use 3D Orbit to view your completed model. 19 Turn layer 30 PILLOW on for a special touch. 20 Close the drawing file.
Intersect Extruded Profiles

Another powerful Boolean command is INTERSECT. Intersect operations create solid objects from the common volumes of overlapping solids. There are several efficient construction techniques that use Intersect operations. For example, you can easily create the bracket from an old-fashioned bow sight used in the sport of archery by intersecting the extruded 2D views.
Try it:
1 Open the drawing 63 Bowsight.dwg. 2 Use the BOUNDARY command to create regions out
of each of the closed loops in the drawing. In the Boundary Creation dialog box under Object Type, click Region from the drop-down list. Click Pick Points and click in the areas as shown in the illustration.
Click in these areas
Intersect Extruded Profiles 69

3 Use the SUBTRACT command to subtract the three slots from the bracket. You should be
left with two region objects: a top profile and a front profile.
4 Use 3D Orbit to display a 3D view of the bracket. 5 Turn off the layers 10 FRONT and 20 TOP. You used the objects on these layers to create
the profiles on the current layer, 30 SOLID.
TIP Always retain 2D reference geometry and construction lines. These objects will be very
handy for future additions and changes. Whether these objects are retained or deleted depends on the setting of the DELOBJ (delete object) system variable.
6 Align the Z axis of the UCS with the red reference line and rotate the top profile 90
degrees as illustrated.

7 Extrude both profiles. To specify the extrusion distance, click a starting point and move
the pointer. The exact distance does not matter, only that the extrusions pass completely through each other.
8 Start the INTERSECT command, select both extrusions, and press ENTER.
9 The bracket model is complete. Use the 3DORBIT command to specify different visual
styles, projections, and viewpoints.

Another example of intersecting two extruded profiles is shown in the following illustration of a hip roof. You can examine the model in detail and try out the technique by opening the drawing 64 Roof.dwg.
Extrude two profiles
Intersect the extrusions
Result
The next illustration shows how you can create a plastic box with a two-degree draft angle. In this example, two closed polylines, an interior one and an exterior one, were created for each profile. You can examine the model in detail and try out the technique by opening the drawing 65 Box.dwg.
Extrude four profiles
Intersect the two interior extrusions and then the two exterior extrusions
Subtract the interior solid from the exterior solid
Result

This same technique can be extended to three profiles. For example, to create a massing model of a museum, you can intersect the extrusions of the front, top, and side elevations. The steps in the process are displayed in the following illustration.
Foundation plan and two elevations
Rotate the elevations into place
Extrude the profiles through each other
Intersect the three extrusions
Try it:
1 Open the drawing 66 Profiles.dwg. 2 Extrude the elevations and foundation plan so they completely cross through each other. 3 Use the INTERSECT command to create the massing model. 4 Close the drawing file.
Many municipalities are beginning to require massing models as a part of the building design approval process. Some municipalities also require a second, more detailed 3D model. The following illustration is another example of the intersection technique that was used to create the bottle in the 66 Bottle.dwg drawing.
Reference objects
Extruded solids
Intersected solids

The final result was obtained through the union of the neck with the body of the bottle, rounding the edges with the FILLET command, and then hollowing the result with the Shell option of the SOLIDEDIT command. Finally, a small cylinder was subtracted from the top of the neck to create an opening into the hollowed interior of the bottle. Be careful to use reasonable radius values for the FILLET command. If the radius you specify is too large, the command will fail to round or fillet the solid.
Final result after rounding edges
Control the Level of Detail

Every object that you model in AutoCAD can be constructed at different levels of detail. As you become skilled at creating solid models, you will be tempted to add more detail than necessary. For example, consider your computer keyboard. Notice the rounded edges, grooves, and curves. If you wanted to create a 3D model of the keyboard, how much detail should you include?
Low detail
Moderate detail
The answer depends on the intended purpose of the model. If the model is part of a representation of a furniture layout, less detail is needed. If the model is part of a detailed rendering for an advertisement, or for output to stress analysis software, much more detail is required.
Try it:
1 Open the drawing 67 Keyboards.dwg. This drawing contains two representations of a
keyboard, a low-detail version and a moderate-detail version.
2 Zoom into each keyboard model. Use 3D Orbit to view each model from several angles. 3 Zoom out to the point where both models appear about the same. 4 Close the drawing file.
Anyone want to volunteer to put the letters on the keys? The concept of controlling detail extends to methods of model construction. For example, here are two representations of part of a staircase. Which model is better?
Control the Level of Detail 75
Extruded sideways from a simple polyline profile
Modeled from components to mimic construction
Again, the answer depends on what you ultimately need:

A conceptual model for design and visualization or A detailed model for rendering, checking for interferences, or construction notes.
Try it:
1 Open the drawing 68 Stairs.dwg. This drawing contains two representations of a small
staircase, a low-detail version and a high-detail version.
2 Use 3D Orbit to view each model from several angles. 3 Close the drawing file.
Use Detail to Control Attention

Another factor to consider involves using variations in detail level to draw attention. You can draw attention to an area of a model by increasing the level of detail in that area and reducing the level of detail in the surrounding area. The attention of your audience will be naturally drawn to the area of greater detail. For example, in the following illustration, consider whether this image is best suited for presenting a new hanging cabinet design, or for presenting the placement of a down-draft stovetop and new lighting. What did your eye land on first?
Use Detail to Control Attention
77
In the following illustration, the level of detail has been kept uniform and low. The purpose is to ensure that the intended audience grasps the overall spatial effect and is not distracted by choices of materials or minor detail.
Compare the previous illustration of the room to the following rendering. What do you find your attention drawn to in the rendering?

The same principle applies to placing images of people in a model. To avoid distracting attention from your design to the clothing or expressions on the people, use outlines or translucent images of the people instead.
TIP Always remind yourself that a 3D model is a tool to achieve a purpose. Too much detail
requires additional cost in time and performance. You can use detail to focus attention on a specific area of a drawing, or you can homogenize the detail in a drawing to convey an effect.
Put Your Work to Use
Whats inside
Solid models have a wide variety of uses, which include generating views for drawings, analyzing designs, and creating presentations. Where to Go From Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Edit Subobjects and Component Objects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Create Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Flatten 3D Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Calculate Mass Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Walk Through or Fly Over 3D Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Check for Interferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Create Files for Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Make 3D Solids Transparent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Create Realistic Images for Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Final Thoughts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
80 Chapter 7 Put Your Work to Use
Where to Go From Here

Once you create a solid model, you can use it for a variety of tasks and applications. With a solid model, you can do any of the following:

Edit the edges, surfaces, and other subcomponents Create sections for analysis, visualization, and drawings Flatten 3D views into 2D views Calculate mass properties such as area or volume Check for visual or physical interferences Create files for stereolithography or numerical control manufacturing Perform 3D walkthroughs or flyovers Make 3D solids transparent or translucent Perform lighting studies and generate shadows Create presentation images using lights, materials, and textures Create photorealistic renderings
Some of the tasks listed will be of interest to you, while others are not relevant to your discipline. The following sections provide you with a short description of these tasks along with several illustrations and examples. References to the Users Guide are listed at the end of each section for additional study.
Edit Subobjects and Component Objects 81
Edit Subobjects and Component Objects

By pressing CTRL as you select a solid, you can select subobjects and component objects in a 3D solid. Subobjects include edges and planar surfaces. Component objects include primitives and other solids that are combined with Boolean operations to form a complex solid. You can also edit a solid using grips to change its dimensions.
An edge subobject is selected on the box Grips are displayed on a box primitive
Two component objects are contained in this combined solid Press and pull a face
Editing subobjects and components is best suited for conceptual design. Using these features, you typically do not specify distances and angles with precision. Instead, you focus on visual and spatial effects by stretching, moving, pressing, and pulling the components of a solid model.
Try It
1 Create a model from several primitives and combine them with a Boolean operation such
as UNION or SUBTRACT.
2 Specify a 3D isometric view and specify either the Conceptual or Realistic visual style.

3 Enter presspull and move your cursor over one of the faces of the solid. You can also start
PRESSPULL from the dashboard. It is located near the center of the 3D Make control panel.
Before pressing or pulling
Face is pulled, colored area indicates change
4 Click and then drag the surface forward and back. As you drag the face, the color of the
face is set temporarily to the current color.
5 Click to accept the change.
Further Study in the Users Guide

Manipulate 3D Solids and Surfaces Press or Pull Bounded Areas Select and Modify 3D Subobjects Use Grip Tools to Modify Objects
Create Sections
83
Create Sections
You can use several approaches to create sections. With destructive sectioning, you typically copy the solid model to its own layer or to a separate drawing file and then subtract another solid from your model to create the section view.
Try It
1 Open the drawing 71 Florett.dwg. This is a solid model of an electric foil point used in the
sport of fencing, but the interior components are not visible.
2 Move your cursor over the foil point. Notice that the components have been associated
into several groups. Set the PICKSTYLE system variable to 0. This allows you to select grouped components individually.
TIP When you need to combine several 3D solids, but you do not want to combine them
with a Union operation, assign the solids to one or more groups.
3 Turn off layer 10 BARREL.

Notice the interior components. Turn off several other layers to explore the design.
4 Turn off all layers except 10 BARREL and 01 BOX. 5 Subtract the box from the barrel. Turn on all layers except the 00 REFERENCE layer. 6 Use 3D Orbit to view the sectioned model.
To get a better section view, you could make a copy of the box to be subtracted, perform a Subtract operation, and then repeat for each component. If you subtract the box from all the components in one Boolean operation, it will combine the results into a single solid, which is usually not what you want to do.
7 Open the drawing 72 Florett-S.dwg. This model is the result of repetitive subtractions on
many of the components.
Destructive sectioning of a solid model using multiple Boolean subtractions

8 Use 3D Orbit to view the model from several angles. 9 Close both drawing files.
TIP For destructive sectioning, you can create any solid shapesimple or complexas the subtracting volume.
In contrast, you can create a live section that does not alter the model and can be easily relocated. To create a live section, you use the SECTIONPLANE and LIVESECTION commands. With the Draw option, you can specify a series of section lines.
Nondestructive, live sectioning of a solid model including a jog
Jog in section plane
Hatching can be assigned automatically

Create Sections and 2D Drawings from 3D Models Create Solids by Slicing
Flatten 3D Views
85
Flatten 3D Views
Normally, when you finish creating a solid model, you define several standard views on a layout, and the model provides these views in a visual style that you specify with no extra work needed before plotting. However, you might encounter situations where you need a static 2D projection of a model for the purpose of modifying or hatching it. You can choose from several commands that create static 2D projections.
The SOLPROF command creates a 2D projection of the visible edges of a solid on a
viewport-specific layera layer visible in only one specified viewport. Another viewportspecific layer includes only the hidden lines, also in 2D. All resulting edges are combined as blocks. A dashed linetype can be assigned to the hidden edges. The FLATSHOT command produces a result similar to SOLPROF, but the results are created on the current layer and on the XY plane of the UCS. The result is visible in all viewports. This is a very handy tool for creating a quick 2D snapshot from any viewpoint. The SECTION command creates a 2D region on the current layer defined by a section plane that is specified with three points. The SECTIONPLANE command creates a block that contains a 2D hatch object. The section plane is defined by at least one linethe section plane contains the line and is perpendicular to the XY plane of the UCS.
Try It
1 Open the drawing 33 Stool.dwg. 2 Enter ucs on the command line and specify the View option. This orients the UCS XY
plane, which is the projection plane for FLATSHOT.
3 Enter flatshot and accept the defaults in the Flatshot dialog box. FLATSHOT is also
available on the dashboard in the lower-right corner of the 3D Make control panel.
4 To locate the block, click a point on the XY plane and press ENTER to accept all default
values.
5 Explode the block and delete some of the 2D objects that would normally be hidden. 6 Close the drawing file.
You can experiment creating flattened blocks from other drawings such as the 66 Bottle drawing or the 71 Florett drawing.

Create a Flattened View
Calculate Mass Properties

You can use the MASSPROP and AREA commands to obtain mass and area data from a solid. For example, assume that the small bottle that you worked with in chapter 3 is made of polyethylene with a specific gravity of 0.92 (cgs units). The volume of the polyethylene is 4.38 cubic centimeters. (The bottle is about 8 cm tall.)
NOTE Because the MASSPROP command does not know the specific gravity of the material used or the units of measurement, it assumes a specific gravity of 1.00 and so the computed mass is always the same as the computed volume.
Thus, the mass of the polyethylene is 4.38 cm3 x 0.92 = 4.03 grams.
Try It
1 Open the drawing 66 Bottle.dwg. 2 Enter massprop and select the bottle. 3 Scan through the mass property report.
Press ESC.
4 Enter area and specify the Object option. 5 Select the bottle to display the surface area of the bottle, both external and internal. 6 Close the drawing file.
How would you obtain the external area or the internal volume of the bottle? In each case, you need the solid, unshelled version of the bottle. This is an example of why it is a good idea to save intermediate stages of each model. Another useful application of MASSPROP is computing the centroids of rotating parts such as cams.

Extract Geometric Information from Objects
Walk Through or Fly Over 3D Models
87
Walk Through or Fly Over 3D Models

The 3D Walk and 3D Fly features provide a way to gain a better 3D feel for interiors and exteriors of structures and other models.
For your convenience, the 3DWALK and 3DFLY commands are accessible from several places in the user interface.
On the dashboard, locate the 3D Navigate control panel. The Walk, Fly, and Walk and Fly
Settings buttons are available from a flyout on the top row.

In 3D Orbit, right-click to display the shortcut menu. Click Other Navigation Modes and
then click Walk or Fly.

In 3D Orbit, press 6 to walk or 7 to fly. On the View menu, click Walk and Fly. Then click either Walk or Fly. Enter 3dwalk or 3dfly on the command line.

Try It
1 Open the drawing 51 Campus.dwg. 2 With the 3DORBIT command, specify an isometric view. Right-click to display the
shortcut menu. Turn on Perspective mode and exit the command.
3 Enter 3dfly on the command line. You can press F1 to see all of the command access
options that are available.
4 Use the arrow keys to fly over the campus. Click and hold the mouse button to steer. The
keyboard controls are similar to those in many computer games. Press ESC to exit.
Try It
1 In the \Sample folder, open the drawing 3DHouse.dwg. 2 Turn on Perspective mode from the 3D Navigate control panel on the dashboard. 3 Enter 3dwalk on the command line and take a tour of the house. 4 Close the drawing file.

Walk and Fly Through a Drawing
Check for Interferences 89
Check for Interferences

Before they become a serious and expensive problem, you can check for interferences either visually or with the Boolean INTERFERE command. The following are real-world examples.
In 73 Eclipse.dwg, the interference between the LEDs and the label of this electronic scoring
machine used in the sport of fencing was discovered in time to add a spacer that solved the problem. In 74 Duct.dwg, the construction of this school building was in progress when it was discovered that a structural steel brace was going to interfere with a duct.
Try It
1 In the \Help\buildyourworld folder, open the drawing 73 Eclipse.dwg. 2 Insert the block, 1PCBoard, into the case using the Center object snap as shown. (The
circuit board is already saved as a block definition in the drawing.)
The insertion point is the center point of the top of the standoff

3 Use 3D Orbit to rotate the view of the scoring machine. Notice that the LED lights are
poking through the plastic label.
The LEDs poke through the label
4 Restore the previous isometric view. (You can use Undo, Zoom /P, or 3D Orbit.) 5 Delete the circuit board block. 6 Turn on the layer, 37 SPACER. The four spacers increase the distance between the circuit
board and the front of the case by just the right amount.
7 Insert the block, 1PCBoard, on top of the spacer, using the Center object snap as shown.
You should zoom in to make sure that you snap to the center of the spacer.
The insertion point is the center point of the top of the white spacer
Check for Interferences 91

8 Use 3D Orbit to rotate the scoring machine until you can see the front label. Notice that
the LED lights are no longer protruding.
Try It
1 In the \Help\buildyourworld\ folder, open the drawing 74 Duct.dwg. 2 Use 3D Orbit to specify the Realistic visual style. Then rotate the view as shown below and
exit 3D Orbit.
3 Make sure that PICKSTYLE is set to 1. 4 Enter interfere on the command line. 5 Select the diagonal brace and press ENTER. Select the dark green duct and press ENTER.
Diagonal brace
Duct

6 In the Interference Checking dialog box, clear the Delete Interference check box. Click
Close.
Interference volume
7 Change the visual style to 3D Wireframe. 8 Use 3D Orbit to view this typical problem area. 9 Close the drawing file.

Check for Interferences within a Solid Model
Create Files for Manufacturing 93
Create Files for Manufacturing

The information in a solid model can be extracted for manufacturing. The following aluminum case was modeled in AutoCAD. Then, a prototype of this case was manufactured in a few weeks without the use of any paper drawings.
Aluminum case manufactured from an AutoCAD drawing file Starting with the solid model, the engineer followed these steps:
In AutoCAD, the ACISOUT command was used to create an SAT file with the essential data
of the case derived from the solid model. The ACIS file was sent by email to a manufacturing company. The manufacturing company imported the ACIS file into their metal-folding software, which added the required bend radii. Their software created an NC (numerical control) file that was sent to a flatbed laser cutting machine. The laser cutting machine cut out the part from an aluminum sheet. The part was folded into shape and given a powder coat. The engineer noticed some potential problems that required a new prototype.
Try It
1 In the \Help\buildyourworld\ folder, open the drawing 75 Case.dwg. 2 Use 3D Orbit to view the case from several angles. 3 Enter acisout on the command line and select the case to create an ACIS file. 4 Open and scan through the resulting SAT file in a text editor such as WordPad. 5 Close the text and drawing files.

Export ACIS Files
Make 3D Solids Transparent

Reducing the opacity of solid models is a useful tool both for presentation and modeling. You can control the transparency of 3D solids with the Opacity control in the Materials window. If a material is assigned to each 3D solid in a model, you can control the opacity of each 3D solid individually.
Try It
1 In the \Help\buildyourworld folder, open the drawing 73 Eclipse.dwg, or in the \Sample
folder, open the drawing 3D House.dwg. If you chose the Eclipse drawing, turn on the 37 SPACER layer and insert the block 1PCBoard, as you did previously.
2 Enter materials on the command line or, on the dashboard, in the Materials control
panel, click the Display Material Window button.
3 At the top of the Materials window, one or more materials are displayed on swatches. If
you opened 3D House.dwg, make sure that the current material is set to Roof. Click the blue-gray swatch that displays the Roof In Use tooltip.
4 On the Materials window, adjust the Opacity slider to a value of 24. If you are using 3D
House.dwg, click on other materials such as Interior Texture and Exterior Textures. On the Materials window, adjust the Opacity slider for each of these.
NOTE For best results, make sure that hardware acceleration is turned on. To access this setting, enter 3dconfig on the command line. In the Adaptive Degeneration and Performance Tuning dialog box, click Manual Tune. In the Manual Performance Tuning dialog box, click Enable Hardware Acceleration.
5 Using 3D Orbit, make sure that the current visual style is set to Realistic and rotate the
model. Try entering -shademode on the command line and specifying Gouraud.
NOTE A faster method is available on the dashboard to set the opacity for all materials. Simply click the X-ray Mode button on the Visual Styles control panel.
6 Close the file.
Make 3D Solids Transparent
95
73 Eclipse.dwg with opacity decreased
3D House.dwg with opacity decreased

Shade and Color Faces Create and Modify Materials
Create Realistic Images for Presentation

With a powerful set of lights, cameras, materials, and texture maps, you can set up a virtual studio within a 3D solid model. For a quick rendering, use the RENDER command. The preset values will produce reasonable results.
Try It
1 In the AutoCAD \Sample folder, open the drawing 3D House.dwg. 2 Turn off layer A-Roof and specify an interesting view, as shown in the illustration. 3 Enter render on the command line or, on the dashboard, on the Render control panel,
click the Render button. Click Continue to ignore any missing texture maps. The model is rendered in the Render window. From the Render window, you can save the resulting image in several formats by clicking File and then Save.
4 Close the file.

Create Realistic Images and Graphics
Final Thoughts
97
Final Thoughts
Solid modeling is fun and produces impressive, useful images and data. As you practice and experiment with solid modeling, you will develop your own preferred techniques. Nevertheless, if you focus on the following points, you will be successful and more efficient.
Organize your work before you begin. Create a logical set of layers. Use precise and disciplined geometric logic when constructing solids to make sure that
your models are correct. Always check your work at every step to reduce the likelihood of perpetuating modeling errors. View a model from several angles, and use the ID command to verify the coordinates of endpoints and the DIST command to verify lengths and distances. Retain reference geometry such as centerlines and profiles. Keep them separate on their own layer. Save models at intermediate stages with different file names, so you can easily go back and retrieve data. Use just enough detail in a solid model to accomplish your goals. Experiment and have fun!
98

Autocad For Begginers

Uploaded by

Copyright:

Available Formats

Autocad For Begginers

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Autocad For Begginers

Uploaded by

Copyright:

Available Formats

Building Your World

Conceptual Design and Visualization with AutoCAD

Copyright 2007 Autodesk, Inc.

Third-Party Software Program Credits

Welcome and Setup Objectives . . . . Prerequisites . . . Setup . . . . . Drawing File Location

Welcome and Setup

Chapter 1 Welcome and Setup

Create and modify 3D solids

View and navigate within a 3D model

Drawing File Location

Introduction to Solid Models

Chapter 2 Introduction to Solid Models

Use Your 2D Drawings to Create Solid Models

Use Your 2D Drawings to Create Solid Models

Common operations and tools used in solid modeling include

Move Copy Rotate Fillet Object snaps Polar snap

Chapter 2 Introduction to Solid Models

Visualize Your Designs While You Work

Explore Design Alternatives 9

Explore Design Alternatives

10 Chapter 2 Introduction to Solid Models

Apply Analysis Tools

Present Your Designs 11

Present Your Designs

Realistic visual style

Conceptual visual style

Hidden visual style

14 Chapter 3 View Models in 3D

Change Views Dynamically

New peninsula Plan view of kitchen Front view of kitchen

Change Views Dynamically

Click and drag along this path

16 Chapter 3 View Models in 3D

8 Close the drawing.

Realistic visual style

Change Views Dynamically

2 Repeat to experiment with

3 Close the drawing.

18 Chapter 3 View Models in 3D

Control the Display Properties of Solid Models

Control the Display Properties of Solid Models 19

20 Chapter 3 View Models in 3D

Specify Precise Views 21

Specify Precise Views

Top (plan) view: projected along the Z axis

Front view: projected along the negative Y axis

Right side view: projected along the X axis

22 Chapter 3 View Models in 3D

Specify Precise Views 23

24 Chapter 3 View Models in 3D

Use the Dashboard

Click to expand or collapse control panel Visual Styles X-ray Mode

Constrained Orbit (a 3D Orbit option)

Parallel Projection Perspective Projection

Use the Dashboard 25

6 On the dashboard, click X-ray Mode.

8 Press ESC to exit 3D Orbit. Close the drawing.

Control the Workplane

28 Chapter 4 Control the Workplane