High density polyethylene - HDPE - is a very popular material for water pipes.
It is
resistant to chemicals
easy and light weighted
long living
low friction
relatively cheap
flexible
sun resistant
PE pipes can be used in range of temperatures -40 oC to 60 oC considering the change of
operating pressure. Typically the standard specification identify class of a HDPE pipe is by
the nominal pressure class - PN - up to PN 20 or 20 bar. HDPE pipe can also be classified
by the material used - PE 100, PE 80, PE63, PE 40 or PE 32.
Pressure Nominal - PN
PE pipes are produced in different pressure grades (PN grades), which indicates the
pressure in bars the pipe can support with water at 20 oC.
The pressure grades available according to European standards are
PN 2.5 - max pressure 2.5 bar
PN 4 - max pressure 4 bar
PN 6 - max pressure 6 bar
PN 10 - max pressure 10 bar
PN 16 - max pressure 16 bar
1 bar = 105 Pa (N/m2) = 0.1 N/mm2 = 10,197 kp/m2 = 10.20 m H2O = 0.9869 atm =
14.50 psi (lbf/in2) = 106 dyn/cm2 = 750 mmHg
Color Codes and Pressure Grades
Color codes used to indicate the pressure grades on the pipes are
Color Code PE Pressure Grade
Yellow PN 4
Red PN 6
Blue PN 10
Green PN 16
Classed by Materials
Polyethylene pipes are also classified by the type of material used:
PE 32 - low pressure piping systems
PE 40 - low pressure piping systems
PE 63 - medium pressure piping systems - irrigation system - drinking water
connections
PE 80 - gas pipe for natural gas distribution network with pressure rate up to 4 bars
- drinking water pipe with pressure rate up to 16 bar - sewers, outfall pipes,
industrial pipes
PE 100 - high demands piping applications
The Minimum Required Strength - MRS - according ISO 4427 for the different materials
are:
MRS at 50 years and 20oC
Designation of material
Mpa (bar)
PE 100 10 (100)
PE 80 8 (80)
PE 63 6.3 (63)
PE 40 4 (40)
PE 32 3.2 (32)
Color Codes and Materials Classifications
Common colors used to classify the pipes
completely black for industrial applications
completely blue, or black with blue stripes, fro potable water
completely yellow, or black with yellow stripes, for gas conduits
Note that the colors may depend on country.
Table 4: HDPE PIPE DIMENSION AS PER DIN 8074-1999E SPECIFICATIONS.
DESIGN STRESS = 5.0 MPa
S 12.5 S 8.3 S5 S 3.2
SDR 26 SDR 17.6 SDR 11 SDR 7.4
O.D.
PN 4 PN 6 PN 10 PN 16
W.T. Weight W.T. Weight W.T. Weight W.T. Weight
mm mm Kg/m mm Kg/m mm Kg/m mm Kg/m
16 1.8 0.084 2.2 0.099
20 1.9 0.112 2.8 0.158
25 1.8 0.137 2.3 0.171 3.5 0.245
32 1.9 0.187 2.9 0.279 4.4 0.393
40 1.8 0.228 2.3 0.285 3.7 0.430 5.5 0.617
50 2.0 0.314 2.9 0.440 4.6 0.666 6.9 0.936
63 2.5 0.494 3.6 0.688 5.8 1.05 8.6 1.47
75 2.9 0.675 4.3 0.976 6.8 1.47 10.3 2.14
90 3.5 0.978 5.1 1.39 8.2 2.12 12.3 3.07
110 4.2 1.43 6.3 2.08 10.0 3.14 15.1 4.51
125 4.8 1.84 7.1 2.66 11.4 4.08 17.1 5.83
140 5.4 2.32 8.0 3.34 12.7 5.08 19.2 7.40
160 6.2 3.04 9.1 4.35 14.6 6.67 21.9 9.52
180 6.9 3.84 10.2 5.48 16.4 8.46 24.6 12.10
200 7.7 4.69 11.4 6.79 18.2 10.4 27.4 14.90
225 8.6 5.96 12.8 8.55 20.5 13.1 30.8 18.90
250 9.6 7.34 14.2 10.6 22.7 16.2 34.2 23.30
280 10.7 9.16 15.9 13.2 25.4 20.3 38.3 29.06
315 12.1 11.7 17.9 16.7 28.6 25.7 43.1 38.35
355 13.6 14.7 20.1 21.2 32.2 32.6 48.5 46.55
400 15.3 18.7 22.7 26.9 36.3 41.4 54.7 59.17
450 17.2 23.6 25.5 34.0 40.9 52.4 61.5 74.82
*500 19.1 29.1 28.3 41.9 45.4 64.6
*560 21.4 36.4 31.7 52.5 50.8 81.1
*630 24.1 46.2 35.7 66.5 57.2 102.6
*710 27.2 58.7 40.2 84.4
*800 30.6 74.3 45.3 107.0
*900 34.4 93.98 51.0 136.8
*1000 38.2 115.7
*1200 45.9 167.0
Can be supplied on special request ; W.T. – Wall Thickness ; O.D. – Outside Diameter;
Note: *
SDR – Standard Dimension Ratio; S – Pipe Series #; PN – Nominal Pressure
Table 5 : PE 100 PIPE DIMENSION CONFORMING TO ISO 4427, DIN 8074 & PrEN 12201 SPECIFICATIONS.
DESIGN STRESS = 8 MPa
S 20 S 12.5 S 10 S8 S 6.3 S5 S4 S 3.2 S 2.5
SDR 41 SDR 26 SDR 21 SDR 17 SDR 13.6 SDR 11 SDR 9 SDR 7.4 SDR 6
OD. PN 4 PN 6.3 PN 8 PN 10 PN 12.5 PN 16 PN 20 PN 25 PN 32
W.T Weigh W.T Weigh Weigh W.T Weigh W.T Weigh W.T Weigh W.T Weigh W.T Weigh W.T Weigh
W.T.
. t . t t . t . t . t . t . t . t
Kg/
mm mm Kg/m mm Kg/m mm mm Kg/m mm Kg/m mm Kg/m mm Kg/m mm Kg/m mm Kg/m
m
20 1.9 0.113 2.3 0.13 2.8 0.156 3.4 0.182
25 2.3 0.173 2.8 0.19 3.5 0.242 4.2 0.281
32 2.0 0.197 2.4 0.234 2.9 0.275 3.6 0.32 4.4 0.390 5.4 0.458
40 2.0 0.25 2.4 0.29 3.0 0.36 3.7 0.434 4.5 0.52 5.5 0.606 6.7 0.708
50 2.0 0.32 2.4 0.37 3.0 0.45 3.7 0.55 4.6 0.672 5.6 0.79 6.9 0.946 8.3 1.09
63 2.5 0.48 3.0 0.58 3.8 0.72 4.7 0.87 5.8 1.06 7.1 1.27 8.6 1.48 10.5 1.74
75 2.9 0.69 3.6 0.82 4.5 1.01 5.6 1.24 6.8 1.48 8.4 1.78 10.3 2.10 12.5 2.46
90 3.5 0.97 4.3 1.18 5.4 1.47 6.7 1.78 8.2 2.14 10.1 2.56 12.3 3.02 15.0 3.54
110 4.2 1.44 5.3 1.78 6.6 2.18 8.1 2.63 10.0 3.17 12.3 3.81 15.1 4.52 18.3 5.28
125 3.1 1.23 4.8 1.85 6.0 2.27 7.4 2.77 9.2 3.39 11.4 4.12 14.0 4.92 17.1 5.82 20.8 6.80
140 3.5 1.55 5.4 2.33 6.7 2.84 8.3 3.48 10.3 4.25 12.7 5.13 15.7 6.17 19.2 7.30 23.3 8.54
160 4.0 2.00 6.2 3.05 7.7 3.74 9.5 4.55 11.8 5.54 14.6 6.72 17.9 8.02 21.9 9.51 26.6 11.13
180 4.4 2.49 6.9 3.81 8.6 4.69 10.7 5.75 13.3 7.03 16.4 8.50 20.1 10.55 24.6 12.03 29.9 14.07
200 4.9 3.05 7.7 4.72 9.6 5.81 11.9 7.10 14.7 8.59 18.2 10.50 22.4 12.55 27.4 14.89 33.2 17.38
225 5.5 3.87 8.6 5.92 10.8 7.34 13.4 8.99 16.6 10.96 20.5 13.30 25.2 15.89 30.8 18.80 37.4 22.00
250 6.2 4.85 9.6 7.34 11.9 8.99 14.8 11.02 18.4 13.50 22.7 16.40 27.9 19.53 34.2 23.21 41.6 27.14
280 6.9 6.00 10.7 9.16 13.4 11.35 16.6 13.86 20.6 16.90 25.4 20.50 31.3 24.55 38.3 29.10 46.5 34.05
315 7.7 7.54 12.1 11.67 15.0 14.26 18.7 17.54 23.2 21.43 28.6 25.88 35.2 31.06 43.1 36.85
355 8.7 9.60 13.6 14.92 16.9 18.11 21.1 22.33 26.1 27.16 32.2 32.83 39.7 39.44 48.5 46.71
400 9.8 12.16 15.3 18.70 19.1 23.09 23.7 28.23 29.4 34.45 36.3 41.69 44.7 50.04
450 11.0 15.33 17.2 23.64 21.5 29.19 26.7 35.76 33.1 43.68 40.9 52.80 50.3 62.7
*500 12.3 19.09 19.1 29.16 23.9 36.07 29.7 44.18 36.8 53.84 45.4 65.13
*560 13.7 23.78 21.4 36.55 26.7 45.08 32.2 55.34 41.2 67.55 50.8 81.80
*630 15.4 30.07 24.1 46.31 30.0 56.95 37.4 70.09 46.3 87.7 57.2 103.4
*710 17.4 38.28 27.2 58.87 33.9 72.5
*800 19.6 48.54 30.6 74.56 38.1 91.9
*900 22.0 61.23 34.4 94.68
*100
24.5 75.80 38.2 116.4
0
*120
29.4 109.12 45.9 167.6
0
Can be supplied on special request ; W.T. – Wall Thickness ; O.D. – Outside
Note: * Diameter; SDR – Standard Dimension Ratio; S – Pipe Series #; PN – Nominal
Pressure
Table 6 : PE 80 PIPE DIMENSION CONFORMING TO ISO 4427/DIN8074
DESIGN STRESS = 6.3 MPa
S 10 S 6.3 S5 S4
SDR 21 SDR 13.6 SDR 11 SDR 9
O.D.
PN 6.3 PN 10 PN 12.5 PN 16
W.T. Weight W.T. Weight W.T. Weight W.T. Weight
mm mm Kg/m mm Kg/m mm Kg/m mm Kg/m
16 1.8 0.085
20 2.3 0.134
25 2.3 0.172 2.8 0.201
32 3.0 0.273 3.6 0.328
40 3.7 0.432 4.5 0.511
50 4.6 0.669 5.6 0.791
63 4.7 0.9 5.8 1.05 7.1 1.27
75 5.6 1.2 6.8 1.48 8.4 1.77
90 4.3 1.2 6.7 1.8 8.2 2.13 10.1 2.55
110 5.3 1.8 8.1 2.6 10.0 3.15 12.3 3.80
125 6.0 2.3 9.2 3.4 11.4 4.10 14.0 4.89
140 6.7 2.8 10.3 4.2 12.7 5.10 15.7 6.14
160 7.7 3.7 11.8 5.5 14.6 6.70 17.9 7.99
180 8.6 4.7 13.3 7.0 16.4 8.46 20.1 10.1
200 9.6 5.8 14.7 8.6 18.2 10.44 22.4 12.5
225 10.8 7.3 16.6 10.9 20.5 13.16 25.2 15.9
250 11.9 9.0 18.4 13.5 22.7 16.27 27.9 19.5
280 13.4 11.3 20.6 16.9 25.4 20.39 31.3 24.4
315 15.0 14.3 23.2 21.3 28.6 25.71 35.2 30.9
355 16.9 18.1 26.1 27.0 32.2 32.64 39.7 39.3
400 19.1 23.0 29.4 34.2 36.2 41.47 44.7 49.8
450 21.5 29.0 33.1 43.4 40.9 52.52 50.3 63.0
*500 23.9 35.9 36.8 53.5 45.4 64.77 55.8 77.6
*560 26.7 44.9 41.2 67.2 50.8 81.14
*630 30.0 56.6 46.3 85.0 57.2 102.0
*710 33.9 72.3 52.2 107.7
*800 38.1 91.7 58.8 136.9
*900 42.9 115.7
*1000 47.7 142.9
*1200 57.2 206.3
Can be supplied on special request ; W.T. – Wall Thickness ; O.D. – Outside Diameter;
Note: *
SDR – Standard Dimension Ratio; S – Pipe Series #; PN – Nominal Pressure
