Scribd
Upload
76 views2 pages

Data Sheet

This document provides information on a 3x4 matrixed data entry keypad, including its manufacturer code, description, dimensions, circuit diagram, output arrangement, specifications on contact rating, bounce, resistance, life, and operating temperature range. Connections are made via solder pads on the lower PCB edge and a single rectangular cutout is needed to mount the low-profile keypad.

Uploaded by

Awad Bekhet
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
76 views2 pages

Data Sheet

This document provides information on a 3x4 matrixed data entry keypad, including its manufacturer code, description, dimensions, circuit diagram, output arrangement, specifications on contact rating, bounce, resistance, life, and operating temperature range. Connections are made via solder pads on the lower PCB edge and a single rectangular cutout is needed to mount the low-profile keypad.

Uploaded by

Awad Bekhet
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DATA SHEET

Keypad, key & rotary switches


Order code Manufacturer code Description
78-0305 n/a MATRIXED 3X4 DATA KEYPAD (RC)

Page 1 of
Keypad, key & rotary switches 2
The enclosed information is believed to be correct, Information may change ‘without notice’ due to Revision A
product improvement. Users should ensure that the product is suitable for their use. E. & O. E. 12/12/2006

Sales: 01206 751166 Technical: 01206 835555 Fax: 01206 751188


[email protected] [email protected] www.rapidelectronics.co.uk
Switches
Data Entry Keypad

A low profile 3 x 4 keypad of compact size suitable for use on hand held and other small equipment. A single
rectangular cut is required to fit the keypad through the front panel and four mounting holes are required for the
retention of the keypad. The conductive rubber contacts require a low operating force, but have a positive action to
give the operator feedback. Connections are terminated to solder pads on the PCB at the lower edge of the switch.

Dimensions (mm):

Circuit Diagram Specifications:

OUTPUT ARRANGEMENT
Output pin no. Symbols
1
2 Col. 2 Contact rating: 20mA, 24VDC max.
3 Row 1 Contact bounce: Less than 10ms
4 Col. 1 Contact resistance: Less than 200Ω
5 Row 4 Mechanical life:
6
> 1 x 10 operations
6 Col. 3 Operating temperature: -20°C to +60°C
7 Row 3
8 Row 2
9
10

You might also like